Call failed constantly after upgrade to OS 4.2

Has anyone else suffering the same problem? My iPhone 4 just keeps failing to make a call after upgrading to OS 4.2. The strange thing is that it seems this just happens within vodafone's 2G network. If I turn 3G on, there is no problem with call failed. However, I normally turn 3G off for getting longer battery life. Is it a problem with the phone? or it is the network problem? Has anyone got the idea?

I am having similar problems connecting calls and having calls drop since upgrading to 4.2.1. Been on to Vodafone to sort but they don't seem to be having issues. From searching online, seems to be an issue after the last upgrade. Not sure what to do next. Happens on 2G and 3G for me

Similar Messages

Cannot End Call on Q10 after upgrading to OS 10.2

I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

marootz wrote:
I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Facetime cannot call my contacts after upgrading to iOS 8

My Son
Is getting frustrated that he cannot call any of his friends on Facetime after upgrading to iOS 8.
We have reset all his settings, gone through the 11 troubleshooting steps here:
http://www.macworld.co.uk/how-to/iphone/11-fixes-for-when-facetime-is-not-workin g-3527872/
Also we have restarted the device several times and updated to 8.0.2.
Any suggestions on how we can fix this?
Thanks,

Can you receive FT calls?
What exactly happens when you try to call someone with FT? Error message?
Have you tried when connected to another network?

Call log issue after upgrading to OS 10.3.1.1581 from 10.2

Dear all.
I have update my BlackBerry 10 os to 10.3.1.1581 and to my surprise i find that the call log os restricted to about 150-200 call whereas it was almost unlimited in the previous 10.2 os .
BlackBerry should issue a fix asap since this is such a basic features and necessity.
I find myself in a very bad situation after upgrading.

I have two call lors. One in the phone app, and one in the hub.
I feel like the one in the phone app is quite short, but the one in the hub is unlimited.
Do you confirm on your side?
That being said, tracking more than 150 previous calls regularly is an extreme usage of the phone, I don't think the OS is made for that. I suggest you use a third party app that will be suited at tracking 200 phone calls a day.
There are several that are free currently in BlackBerry World (the Free March section).
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Failed install after upgrade

I posted this in the Software Update forum but got no answer there...
Just updated my n73 to v3.0638.0.0.1 - thanks guys! - and am having an odd issue on restarting the phone.
I get an install bar and then a message asking me to complete the installation from Apps Manager.
Looking in Apps manager there is an "uninstalled" App called 20000d45.sis on the memory card. Clicking this and choosing to install then calls up the MobiPocket reader installer, which fails shortly after the bar finishes.
So problem identified. Mobipocket doesn't like the new update. Fair enough.
How do I stop it trying to install after every restart!
There seems to be no way to delete the installer from inside App Manger!
Whilst I have found related files on the Memory Card that I can delete, this seems to not help. The files still show on the phone.
Any tips?

Just connect it to the PC via USB Mode.There ya will see a drive of n73 on yar PC then open the drive and then direct go to Search option here ya will see dat 2000 or something like dat and then just delete it.I bet ya will never face any trouble like dis thing.
It not related wit da update program each time ya Hard reset update software without uninstalling the applications it will happen.So do it carefully.
O yeah at first I was so scared of ds type of problem but now it is very simple thing to me.
Last thing,Connecting N(73,80,91) via USB Mode and tranferring data in the N73 is more safe and less problematic than to do it with the damn PC Suit

Labview 6.0 cannot call ActiveX functions after upgrading to Teststand 2

I'm running on Win2K on my development system. I have been running fine with Teststand ver 1.0.3 and Labview 6.0 with several VI's using ActiveX to work with the TestStand engine. I tried installing TestStand 2.0 (dated Aug 2001) next to 1.03 (not on top of it) to start upgrading and all those ActiveX VI's no longer functioned.
NI's documentation says Teststand 2 installs the LV RTE 6.02 on the system and to run a "REPAIR" on the LV RT Server 6.02 if installing LV 6.0 after Teststand (not my case). I ran the "repair" anyway to no avail.
I tried running NI's ActiveX example "Write Table to XL.vi" and it also does not run (Error -2147024891, "Access is denied.
in Open Excel and Make Visible.vi->Wr
ite Table to XL.vi"). I have run this before just fine.
I've even tried re-installing LV 6.0 and re-running the repair to no avail, also mass compiling everything in site. Always the same error!
Please help, anyone. My system is DOWN!.....

We have not seen this exact problem before with TestStand 1.0.3, 2.0, and LabVIEW 6.0. If your system is still down, please give us a call and we can talk through getting everything working. You can make a phone support request online by going to Request Support and choosing "Phone NI" from the Communication Method Pull Down menu.
Regards,
Shannon Rariden
Applications Engineer
National Instruments

Service manager Configuration Management Cube Library MP failed status after upgrade SCSM 20012 R2

Dear,
After the Upgrade to SCSM 2012 R2, the status of Service manager Configuration Management Cube Library MP is set to Failed and the System library MP is stuck on running in the eventvwr i got the following message:
Deployment Execution Infrastructure has retried the maximum number of times and is giving up on this execution step.
MP Element ID: SystemCenterWorkItemsCube
MP name: ServiceManager.ConfigurationManagement.Cubes.Library
MP version: 7.5.3079.0
Operation: Update
Error message: Errors in the metadata manager. The 'XXXXCustomerList_XXXXCustomerListId;' intermediate granularity attribute ID of the 'IncidentDim_XXXXXCustomerList' measure group dimension does not exist.
I already restarted the deployment of the MP
regards
Geert

Hi !
This looks like the "Primary Key Issue", documented in the MPSync-Fails Section at
http://technet.microsoft.com/en-us/library/jj614520.aspx
1.) Stop, Disable and Disable-Schedule for ALL DW-Jobs
2.) Follow instructions in the link
3.) Run DW-Jobs in correct oder like here
http://blogs.technet.com/b/mihai/archive/2013/07/03/resetting-and-running-the-service-manager-data-warehouse-jobs-separately.aspx
R.

Battery discharging and fan running constantly after upgrading to Yosemite

MBP Early 2011. Just got back a month ago from Apple Support for video related issue. Almost EVERYTHING was replaced (logic board, video, ram, battery, cdrom, even my dented case. Thank you Apple!). Has run for a month flawlessly on Mavericks. Upgraded to Yosemite 48 hours ago. Light on magsafe stays green. Battery indicator icon states Battery is not charging (currently at 75% and falling). Power source: Power adapter. While plugged in and operating, battery is discharging and fan constantly running. If I shut down, mag safe light turns yellow and battery will charge to 100%. If left plugged in and running in Yosemite, battery will drain all the way down.
Have tried:
Rebooting, putting into sleep mode, shutting down completely, unplugging and replugging power supply from wall and MBP while on and off, resetting SMC with Shift Control Option Power keys/buttons.
No third party battery or power apps installed, fresh load of Mavericks from factory when I got it back. This feels like something with the new energy management in Yosemite isn't working as expected to me. Thoughts & suggestions appreciated!

UPDATE: Resolved!
Disabled all login items but problem persisted on normal boot. Resetting SMC and PRAM had no effect. After booting into Safe Boot, problem did not exist. Looked in console logs and saw this right as problem started to occur:
10/20/14 6:49:07.004 PM com.apple.xpc.launchd[1]: (com.gspy.MO3V2Daemon[93967]) Could not find and/or execute program specified by service: 2: No such file or directory: /Library/MO3V2/MO3V2Daemon.app/Contents/MacOS/MO3V2Daemon
This pertains to the Steelseries WoW MMO gaming mouse. Ran the uninstall.command from Applications for this mouse software and rebooted. Fixed.
Light on MagSafe connector is orange, battery shows as charging, fan is not running constantly. I can't begin to understand how this would effect the battery charging functions but, after uninstalling this, the problem was resolved. Hope this will help someone else.

"Load Report Failed" Error after upgrading to CR XI R2 and VS 2005

Previously I had visual studio 2003 and crystal report XI and on my website project and I have this function where users can download their monthly statement. and it was working fine. here is my code of the function...
Private Sub cmdStatement_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdStatement.Click
        Dim pReport As New ReportDocument
        pReport = New ReportDocument()
        Try
            'Dim pTable As Table
            pReport.Load(Server.MapPath(".") & "\reports\MonthlyStatement.rpt")
            pReport.SetDatabaseLogon(dbUser, dbPassword, dbServer, dbDatabase)
            pReport.RecordSelectionFormula = "{CCMSC.CID}='" & mCID & "'"
            Dim pArray() As String =
            DataAccess.SqlPublic.ExecuteDataset(cnString, "webDownloadEStatement", pArray)
            Response.ClearContent()
            Response.ClearHeaders()
            Response.ContentType = "application/pdf"
            pReport.ExportToHttpResponse(CrystalDecisions.[Shared].ExportFormatType.PortableDocFormat, Response, True, "DebtHelper_" & mCID & "_MonthlyStatement")
            pReport.Dispose()
        Catch ex As Exception
            divMessage.Visible = True
            lblMessage.Text = ex.Message
        Finally
            pReport.Dispose()
        End Try
    End Sub
Now, recently I upgraded my crystal to CR XI Release 2 SP6 and also upgraded my web project to Visual Studio 2005 with .NET 2.0. and now it gives me "report load failed" error on the very first line pReport.Load(......)
The project has updated the references related to crystal reports to the 11.5 version from 11.0. Not sure what am I missing here.
I have also opened the report file in the new crystal and saved it. I also opened it in Visual Studio itself and saved it.
I would appreciate any help possible.
Thanks
Raj

Hi! Ludek,
I have tried to hard code the path. I checked the win/temp folder and the aspnet account already has the read/write permissions.
Below is the detailed error message:
Error Message: Load report failed.
Page Error Occurred: /MyDebthelper/reports.aspx
ExceptionType: System.Exception
Inner Exception: System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
Stack Trace: at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at MyDebthelper.reports.cmdStatement_Click(Object sender, EventArgs e) in C:\Documents and Settings\RBhavsar\My Documents\Visual Studio 2005\Projects\MyDebtHelper\MyDebthelper\reports.aspx.vb:line 83 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks
Raj
Edited by: debthelper on Apr 30, 2010 5:21 PM

CRVS2010 Beta 2 - "Database Logon failed" Error, after Upgrade

Hi,
Generally: we are using the Crystal Reports in combination with a DataSet, that is filled during runtime and pushed to the report, using "SetDataSource". The Project is an ASP .NET 3.5 Project, published on our server.
I upgraded my development-machine to CRVS2010 (installed both packages - the CRVS for VS 2010 and the runtime) last week and changed some fields in the Report. The DataSet was left unchanged. Everything is working well on my development-machine, but when I publish the Project to our server, I get an "Databse Logon failed" Error, when I want to create my Report. The CRVS2010 Beta 2 redist Runtime is installed on our server. Here is the code, we use:
// create new Report
var report = new Reports.repMyReport();
// DataSource ds was filled correctly (we checked with export to XML
report.SetDataSource(ds);
// Set several Parameters to Report
report.SetParameterValue("test", "test");
// Export Report to PDF-Format and open in Browser
report.ExportToHttpResponse(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, Response, false, "reportName.pdf");
Response.End();
The error I get is:
Database logon failed.
[COMException (0x8004100f): Database logon failed.]
   CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
   CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +260
[LogOnException: Database logon failed.]
   CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +325
   CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +315
   CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +650
   CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) +98
   CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName) +98
   CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName) +124
   SprintBoxWeb.BuchungDruck.Page_Load(Object sender, EventArgs e) in D:\Projects\sprnt_erp\SprintBoxWeb\BuchungDruck.aspx.cs:32
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
I already tried everything, found googling the web and/or searching this forum:
e.g.: perform "verify Database" on all Reports and map the DataSet.xsd again to the Report
Is that a known issue on the Beta and we should wait for the RC, or does anyone have an idea how to fix that one?
This error is really annoying!
Many thanks for your help.
kind regards
Reinhard

Dear Ludek,
Many thanks for your quick reply. Currently, I have to finish some other things. I will try your ideas next week and give you some feedback then, to keep you informed.
best regards,
Reinhard

Cable driver fail N95 after upgrade

Hello!
After I upgraded the software I cannot longer connect my phone through cable.
In Device Manager the phone appears as "Wireless communication devices", and the phone as a computer icon with an exclamation mark in it. Removing and reinstalling it gives "Nokia N95 USB Phone Parent" and then "This hardware cannot be installed - An error occurred when installing the driver" (or somnething like that) - "A serious error occurred during installation".
Please advice?

Uninstall all nokia's software from pc, then reinstall again. Try to download nokia's connectivity cable driver from nokia's website.
N8,N97,N96,N86,N95 8GB,N85,5800,N79,N918GB,N82, N81, N93, N80, N73ME, N70, 6680, 6600,5320,5130,7610,7650,,SIE SX1...................

Can't reset incoming call during conversation after upgrade to IOS 5

Right after migration to IOS 5 I discovered that it's impossible to drop incoming call during conversation. I mean when you pressed power button twice in IOS 4 call must be transferred to voice mail or resetted. It was fine before migration to 5th version pf OS. I tried to reset my phone to manufacture settings but result was the same.
Does anyone met the same with new IOS?

Weird, I can't edit my messages here...
It doesn't matter once or twice the button was pressed - both calls are resetted.

Connection with license server failed sap after upgrade to 8.8

Hi
I had just upgraded to 2007b pl14 to 8.8 everything done good but when I login it giving me erroer "connection with license server failed"
I had restarted the licence server but still it same
And my licance server option is also disable ?
plz help me out

Hi,
check the below link, it will help you........
Re: Error in Server Tools Installation
Rgds,
Priya

Reconfig call flow (?) after upgrading to CCM4.1(3)

Hello everyone,
I upgrade CCM 3.3(5) to CCM4.1(3) without any errors. Yet the follow call flow seems not working.
How could I reconfig it in new CCM server? Thank you for your reply.
Outside callers call to hotline#
- Carrier translates it to local#
- CallManager translates it to 1500 and sends it to Unity
- Unity plays greeting of hotline call handler and transfers call to extension #1001
- If 1001 is busy or not answer, call is forwarded to 1002.
- If 1002 is busy or not answer, call is forwarded to 1003.
- If 1003 is busy or not answer, call is forwarded to voice mail of hotline
Howard

Hi Howard,
Hope things are well for you:) It seems like this should work regardless of the Unity version. What number/DN do you have setup up for the Voicemail box for the Hotline? It can't be 1500 because that is the Call Handler correct. You might want to do a test setup and make the last forward step a phone like a 7940 so that you can see what number is being presented to Unity in the final forward step (you may be able to use Unity Call Viewer, not sure about your older version).
It seems likely the problem is in the number being presented vs the number you have configured for the Hotline Mailbox.
Hope this helps!
Rob

Fan is running constantly after upgrading to Yosemite

I have a 2007 era MacBookPro and since upgrading toYosemite, the fan will not stop running, from the moment I power on. This is new behavior that I did not have under previous OSs. At the moment, I have only Safari and Finder apps open and the machine is so hot I'm afraid I'm going to start a fire!
Here's the machine I have:
MacBook Pro (17-inch 2.4GHZ)
2.4 GHz Intel Core 2 Duo
4 GB 667 MHz DDR2 SDRAM
NVIDIA GeForce 8600M GT 256 MB
Am I going to have to revert back to the previous OS? I'm afraid to leave it on unattended.
Rhonda

Hi. Try resetting your NVRAM & SMC.
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT3964

Call failed constantly after upgrade to OS 4.2

Similar Messages

Maybe you are looking for