Call failed error
Recently my phone stopped being able to make toll free 800 calls, local and long distance work fine but when I tried to call my bank and other companies 800 numbers I get a call failed error , not sure if it is my phone scewing up or what but I used to be able to call toll free numbers and all of a sudden was not able to anymore. Any suggestions or tips
Hi and Welcome to the Forums!
Anytime random strange behaviors creep in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Sony BRAVIA Call failed error message
I'm trying to use Skype on a Sony BRAVIA TV and with the CMU-BR100 camera installed. I cannot make a video or telephone call to another skype user. I get call failed error message for both video and telephone. Do I need to buy Skype credits to be able to use Skype ??
Shorty wrote:
Can anyone experiencing the 'call failed' issue comment on whether the problem occurs 100% of the time, or is it always within the first 10 minutes after powering on the TV?
Sorry.... Maybe I'm a bit thick, but do you mean 1/ switch the TV on and try Skype after 10 minutes? Or 2/ Try Skype within the 10 minutes? I'm happy to help with research if I can, even though I don't even switch this TV on anymore!
My issue is constant. I.E. I turn the power off at the socket, wait at least 10 seconds, turn on, start the TV and make a Skype call. That works..... ONCE. If I try to call a second contact, it gives the "call failed" message, without even waiting for any type of connection, or pausing for any timeout. If anyone tries to contact me, they get a "busy" message.
To be honest, I've not tried leaving the TV on for a while before trying. If I've nothing better to do over the next few days, I'll try that. I'm not that interested in it anymore. In fact... I don't like to see that TV in my living room and don't even use it!
Skype on my phone works better, with better video and sound quality. That's where I'm at.....
Maybe I'm on a downer tonight... -
The Remote Procedure call failed error in Microsoft Direct Access configuration
Hi,
I have setup the Microsoft Base lab using Microsoft TLG, I have generated the IPHTTPS and NLS server certificate using the Microsoft PKI. After that I have installed the Microsoft Direct Access role but at the time of configuring the Remote Access Server
it fails with the remote procedure call failed error.
Could anybody help me to resolve this issue. I have searched a lot but no any solution found. It will be very helpful, if some one can point me where I did mistake.
Thanks,
Arifsql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
RFC call failed : Error when opening an RFC connection
Hi,
As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
"RFC call failed : Error when opening an RFC connection"
Others things are with success message.
Regards,
Bala Rajahi
check this links
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
also check Tcode: SLDAPICUST.
run tcode SLDCHECK? any error?
Thanks
Rodrigo
PS: If useful reward points -
Random Net connection call failed errors
Hi All,
I've built a Flex application which is calling coldfusion CFC through remote objects in order to retrieve data.
2 days ago, I've updated the server with coldfusion 9 and my issue is that I have sometime those kind of error messages :
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Failed"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 503"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 500"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 504"]
[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'http://servername/flex2gateway/'"]
It was also happening on Coldfusion 8 and even on one other sever with another application.
(but same logic Flex -> remote Objects -> CFC -> sql2005).
When we were still running CF8 I added this <add-no-cache-headers>false</add-no-cache-headers> to the service-config.xml file but with no success.
I do not know if it's related to this but I also sometimes have this error message :
[RPC Fault faultString="Channel disconnected" faultCode="Client.Error.DeliveryInDoubt" faultDetail="Channel disconnected before an acknowledgement was received"]
Most if time the application is running fine, but I want to avoid this errors.
For example yesterday I recieved +- 50 times the NetConnection.Call.Failed error and 20 times Channel disconnected error.
Do not hesitate to ask if I need to post CF9 settings summary or something else.
Thank you for your help.
AubryThat's a pity, but thanks for the reply.
Dik -
"Call Failed" error outside of home area code
I have an iPhone 5 on verizon wireless running IOS 6.1, and everytime I make a call outside of my home area code I get the 'call failed" error. I have Dial Assist turned on. I get the same message with Dial Assist turned off. I am syncing to my corporate Exchange directory if that makes any difference
Anyone else run into this before?hi
check this links
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
also check Tcode: SLDAPICUST.
run tcode SLDCHECK? any error?
Thanks
Rodrigo
PS: If useful reward points -
"Call Fail" error when trying to make out calls.
Hi, I'm on iPhone 4S with iOS 6.1.3 . Recently I've been experiencing this problem of doing outgoing calls. It keeps on having this "CALL FAILED" error. Previously it sometimes came but went back normal after an hour and I thought It might be caused by my network carrier . But its been 4 days now. Do take note that Im still be able to receive all incoming calls, SMS, Apps Messaging as well internet surfing & others. Pls guys help me to resolve this issue. Tq.
P/S
My location = Malaysia
My ISP & cellular network carrier = CelcomHello zipinabag,
Thank you for all the information you provided regarding the issue you are experiencing when making a call on the iPhone. I recommend reviewing this tutorial:
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thank you for using Apple Support Communities.
Best,
Sheila M. -
VOIP call Failed (Error Code 15) in Prime Event log.
I'm seeing the following events in Prime Infrastructure related to Cisco 7925 phones.
VOIP Call Failed for "(Error Code 15) occurred on client "xx:xx:xx:xx:xx:xx' which was associated to AP <APName> on interface 802.11b/g.
I can't seem to find where this error code 15 is defined. The closest I was able to find was error code 15 under gatekeeper codes in the following document which may or may not be relavent.
http://www.cisco.com/en/US/docs/ios/voice/monitor/configuration/guide/vt_voip_err_cds_ps6350_TSD_Products_Configuration_Guide_Chapter.html
Any insight into this would be appreciated.
Jake
P.S. No voip call jokes on 802.11b/g pleaseIt had 18Mbps set as the min phy rate. I also think it has to do with CAC issues at 18Mbps that are pretty well noted and differeing mandatory rates across the 802.11b/g/n and 802.11a/n networks on the controller. When the phone would roam onto a radio with 18Mbps was the min mandatory rate, it would drop and give this error.
-
i am using my MS Access 2013 to connect with my oracle database. I created the odbc link and successfully have connection test pass. However i can;t link the database with my MS access. When i am using different software (mapinfo), i am able to connect to oracle database. The error is"1013: user requested cancel of current operation"
In MS access, i open the external data and select odbc. Select my odbc link created previously, enter the password and after a while the error message pop up.
But if i am using another tools, such as SQL Developer or Mapinfo, i will able to connect to oracle database using the same odbc link. -
No service and call fail error
please solve this asvp
Update: After about an hour, the 3GS finally changed to zero bars.
My guess is, ATT was having intermittent problems with the signal and the 3GS stayed at 4 bars while the iphone 4 dropped into and out of "No Service".
This morning (next day) they are both getting 4 bars. We'll see... -
Backint failed "ERROR: unable to find file "
Hello
I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
I got errror:
BR0231E Backup utility call failed
ERROR: unable to find file /oracle/BWP/sapdata4
Can u help me
Regards
FethiThis is the backup logfile:
BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
BR0101I Parameters
Name Value
oracle_sid BWP
oracle_home /oracle/BWP/102_64
oracle_profile /oracle/BWP/102_64/dbs/initBWP.ora
sapdata_home /oracle/BWP
sap_profile /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
backup_mode ALL
backup_type offline
backup_dev_type util_file
util_par_file /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
system_info orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
oracle_info BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
sap_info 700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
make_info linuxx86_64 OCI_102 Feb 8 2008
command_line brbackup -c force -p initBWP_sapdata_offline.sap
BR0116I ARCHIVE LOG LIST before backup for database instance BWP
Parameter Value
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination /oracle/BWP/oraarch/BWParch
Archive format %t_%s_%r.dbf
Oldest online log sequence 27
Next log sequence to archive 30
Current log sequence 30 SCN: 88160883
Database block size 8192 Thread: 1
Current system change number 88168768 ResetId: 655409152
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data1 17498636288 4 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data2 16450060288 5 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data3 15820914688 6 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP700 ONLINE* ONLINE+ /oracle/BWP/sapdata2/BWM700.data1 15128862720 11 64784 NOLINK FILE 34359721984 104857600 8192
PSAPBWP700 ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM700.data2 4132511744 12 64785 NOLINK FILE 34359721984 8192 8192
PSAPBWPDIM ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMdim.data1 4202700800 7 64770 NOLINK FILE 10485760000 20971520 8192
PSAPBWPFACT ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMfact.data1 6719283200 8 64770 NOLINK FILE 34359721984 20971520 8192
PSAPBWPODS ONLINE* ONLINE+ /oracle/BWP/sapdata2/BWMods.data1 19868426240 9 64784 NOLINK FILE 34359721984 20971520 8192
PSAPBWPUSR ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMusr.data1 239083520 10 64770 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE+ ONLINE+ /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1 134225920 20 64785 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ /oracle/BWP/sapdata1/temp_1/temp.data1 10485768192 -1 64770 NOLINK FILE 34358689792 20971520 8192
PSAPUNDO ONLINE- ONLINE+ /oracle/BWP/sapdata1/undo_1/undo.data1 1073750016 2 64770 NOLINK FILE 34359721984 20971520 8192
SYSAUX ONLINE* ONLINE+ /oracle/BWP/sapdata1/sysaux_1/sysaux.data1 671096832 3 64770 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ /oracle/BWP/sapdata1/system_1/system.data1 838868992 1 64770 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
/oracle/BWP/origlogA/log_g11m1.dbf 52429312 1 64774 INUSE NOLINK FILE
/oracle/BWP/mirrlogA/log_g11m2.dbf 52429312 1 64776 INUSE NOLINK FILE
/oracle/BWP/origlogB/log_g12m1.dbf 52429312 2 64775 INUSE NOLINK FILE
/oracle/BWP/mirrlogB/log_g12m2.dbf 52429312 2 64777 INUSE NOLINK FILE
/oracle/BWP/origlogA/log_g13m1.dbf 52429312 3 64774 INUSE NOLINK FILE
/oracle/BWP/mirrlogA/log_g13m2.dbf 52429312 3 64776 INUSE NOLINK FILE
/oracle/BWP/origlogB/log_g14m1.dbf 52429312 4 64775 INUSE NOLINK FILE
/oracle/BWP/mirrlogB/log_g14m2.dbf 52429312 4 64777 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf 34979840 0 64774 NOLINK FILE
/oracle/BWP/origlogB/cntrl/cntrlBWP.dbf 34979840 0 64775 NOLINK FILE
/oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf 34979840 0 64770 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
PSAPBWPUSR
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0057I Backup of database: BWP
BR0058I BRBACKUP action ID: bdxzgdlt
BR0059I BRBACKUP function ID: aff
BR0110I Backup mode: ALL
BR0077I Database files for backup:
/oracle/BWP/origlogA/log_g11m1.dbf
/oracle/BWP/origlogB/log_g12m1.dbf
/oracle/BWP/origlogA/log_g13m1.dbf
/oracle/BWP/origlogB/log_g14m1.dbf
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
BR0061I 19 files found for backup, total size 108250.510 MB
BR0143I Backup type: offline
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0307I Shutting down database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0308I Shutdown of database instance BWP successful
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
WARNING: unknown parameter: print_log_flag 1
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for restore
Program: /usr/sap/BWP/SYS/exe/run/backint 5.1
Input File: /oracle/BWP/sapbackup/.bdxzgdlt.lst
Profile: /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
Function: BACKUP
Backup Type: BACKUP_FILE
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
BR0232E 0 of 19 files saved by backup utility
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
BR0304I Starting and opening database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
BR0305I Start and open of database instance BWP successful
BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
Thank you
Regards -
Everytime i try to call someone, i get "call failed" error, when i try my sim in other iphone, the error won't appear! My sim card is 3G
Have a look at this it might help
http://support.apple.com/kb/TS4148 -
Error during installation of ECC6- system call failed
Dear all,
i encounter the error as below during sap installation. its looks like the ID issue, but this id (fbqadm) is using by me to log into the windows. please help me.
thank
ERROR 2009-03-17 10:07:25.583 [syxxsyshlp.cpp:78]
syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (fbqadm, SAPFBWDEV01, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1014) in file (synxccuren.cpp).
TRACE 2009-03-17 10:07:25.813 [iaxxejsbas.hpp:408]
handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE 2009-03-17 10:07:25.813
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtExceptionproblem fix after reboot the server
-
I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>16000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
<EventRecordID>58</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<ErrorMessage>%%2147944126</ErrorMessage>
<ErrorCode>0x800706BE</ErrorCode>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16010
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
<EventID>16010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
<EventRecordID>59</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
<ErrorCode>15005</ErrorCode>
<DataItemName>Parameter0</DataItemName>
<EventPayload>
</EventPayload>
</ProcessingErrorData>
</Event>Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful.
Maybe you are looking for
-
"unable to open project file" after importing layered Photoshop file
After spending a day of work, I saved and closed my 720p project. Today, I can't open it. I get a message saying: "Unable to open project file." Same thing happens with the auto-saved copy. I have narrowed down the problem to this: I made a new 720p
-
How do I get a chart to show the actual time with blocked data??
I am currently working on a program that reads the voltage off of a system with a pulsitile quality. The hardware is not national instruments (I know, not smart, but) so I am taking all info in blocks that cover 3 seconds so I can preform some averag
-
Page preview displaying iViews incorrectly
I am just learning Portal and have run into an issue that I'm sure folks out here can help me with. I created two iViews from the SAP iView transaction template. Both transactions are custom transactions, pointing to custom Z-programs reports. I h
-
Forms and report server on same machine
dear fellows if i install form 6i server and after it install report server they override each others setting and only one runs (later ) any help thankx
-
Oracle WareHouse Builder 10g Beta IV Release Documentation
Hi All, Is there anyone who will clarify whether I am thinking in the wrong way? Actually, I wanted to install a repository through Repository Assistant. There are three PCs on which this OWB version is installed. From my end (say PC_1 ) I was trying