Call failed with full signal

I can't make or recieve calls because it says "call failed" even with a full signal. All other functions work fine. I've reset and restored the phone and it didn't help.

i had that twice i am now on my 3rd iphone because of the problem it wont go away tho, so i would do as i did goto apple and they will give u a replacement, aslong as it hasn't got wet..

Similar Messages

  • Phone says "call failed" with full service

    at school, especially, my phone has 3, 4, or full bars, but when i try to call someone, it either says call failed, or just doesn't ring, and keeps trying to call for minutes and minutes.
    it only happens from time to time, but more often than not.
    it can work in one spot one day, but not in the same spot the next.

    Try what is suggested here
    http://discussions.apple.com/message.jspa?messageID=5851978#5851978

  • TS1398 my problem is my iphone 4s is connected to the internet(wi-fi) with full signal strength but freezes when browsing and says "Cannot Open Page, Safari could not open page because the server stopped responding".

    my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
    "Cannot Open Page"
    "Safari could not open page because the server stopped responding"
    I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.

    Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
    IF that does not work -
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Finally - if problem still present -
    Go to Settings>General>Reset
         Reset the network settings - you will need to add the password of your home WiFi in your phone once more
    The device should turn itself off & back on then go into Settings>Wifi and join your network

  • What is this? Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE._

    hi    This event is logged in SharePoint 2010 logs often please help trace the issue also it precedes with Project server WCF code execution which alos is quite slow in execution, means PWA site runing slow. why does status read
    provisioning while i am not running anything.
    please help!!!
    10/03/2011 14:39:23.46 w3wp.exe (0x306C)                      
    0x2FC4
    SharePoint Foundation         Topology                      
    e5mc Medium  
    WcfSendRequest: RemoteAddress: 'http://moss:32843/a667a0a96d314e5e9e6c8fe4866c5db4/PSI/PWA.svc' Channel: 'Microsoft.Office.Project.Server.Interfaces.IPWA' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/AdminReadSiteMapTyped'
    MessageId: 'urn:uuid:0751dbdd-76c0-4410-ac73-2f1782e1513b'
    91b87b3b-e9ad-43b9-9e8c-e553ba7e2f6c
    10/03/2011 14:39:23.46 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Topology                      
    e5mb Medium  
    WcfReceiveRequest: LocalAddress: 'http://moss.ccl.local:32843/a247f7273c09486999c9f111798cab59/ProfilePropertyService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties'
    MessageId: 'urn:uuid:772a5c58-c0e4-4b0f-9142-f634fee413a9'
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.46 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Monitoring                    
    nasq Medium  
    Entering monitored scope (ExecuteWcfServerOperation)
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.64 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Monitoring                    
    b4ly Medium  
    Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=179.589584709789
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.64 w3wp.exe (0x306C)                      
    0x3170
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (ExecuteWcfOperation:http://Microsoft.Office.Server.UserProfiles/GetProfileProperties). Execution Time=205.109867315539
    10/03/2011 14:39:23.64 w3wp.exe (0x306C)                      
    0x3170
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (ExecuteOnChannel:GetProfileProperties). Execution Time=206.500546857212
    10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
    0x0FA8 Project Server                
    Provisioning                  
    8zdn Medium  
    [SERVICE] ProjectQueueService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
    0x0FA8 Project Server                
    Provisioning                  
    128v Medium  
    [SERVICE] ProjectQueueService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
    0x0FA4 Project Server                
    Provisioning                  
    8zdn Medium  
    [SERVICE] ProjectEventService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
    0x0FA4 Project Server                
    Provisioning                  
    128v Medium  
    [SERVICE] ProjectEventService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    Sandboxed Code Service        
    ei0p Monitorable
    - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc)     at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)     at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
    retry, Int32 retryInterval)     at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    Sandboxed Code Service        
    ei0p Monitorable
    - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc)     at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)     at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
    retry, Int32 retryInterval)     at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.

    Hi there,
    A quick search showed the result on fourm thread:
    It's related to SHarePoint foundation error & this issue occurs when the account under which SPUserCodeService is configured to run does not have the necessary permissions to access the performance counters on the server.
    http://social.technet.microsoft.com/Forums/eu/sharepoint2010setup/thread/9fbcf2a3-1b1f-4fd8-a9b4-dc63ed753973
    To read in support article.
    http://support.microsoft.com/kb/983081Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82

  • Will not call or receive calls with full signal!

    This is my second iPhone 3G (I got this one a month ago) and I am unable to make or receive calls. If I dial a number, the other person's phone rings once, then my iPhone says "Call Failed." Also, when receive, I touch Answer and the iPhone freezes. The signal bars and the internet "E" disappear when calling too. Texting (SMS) and the App Store work perfectly. I just tried to enter the serial number to connect with an Apple expert and "We're sorry, but that is not a valid serial number. Please try again." appeared. Is there anything I can do besides sending it in to fix this?

    Hi,
    Try restarting the iPhone by holding the Sleep/Wake button until the red slider appears> then slide to turn off> and turn the iPhone back on by pressing the Sleep/Wake again, as described on page 34 of the iPhone User Guide.
    http://manuals.info.apple.com/en/iPhoneUserGuide.pdf
    If the issue persists, try the general tips in this article: http://support.apple.com/kb/HT1737
    -Jason

  • Excessive dropped calls with full signal!!!

    I have a 3GS and have updated to 3.1.2 I recall that one of the items addressed in this update was the dropped calls issue. Mine have been severely worse since the update. It is quite aggravating when the calls dropped are when I have full signal. I am not the only one I know with this particular issue. Is this being addressed?

    The phone on the iphone is not the best. I live in Dallas and when the phone is on 3g it really is unusable. Just for grins I started a call log for a day. In my very unscientific experiment I dropped (or couldn't hear the person and had to call back) 76.6% of my calls when I 3g for the day. In my opinion, Apple or no Apple, this is unacceptable for any cell phone. I tried calling ATT to see if I could get some credit and they said no. I have taken the phone to the apple store and they said it was the network not the phone. I have restored the phone, reset the phone, updated the phone, and still nothing seems to work.
    However, when the phone is in 2g it seems to work fine. Except the only problem with that is when you are searching the net, or checking email and someone calls you it won't ring. This a mild annoyance because at least when I do call or someone calls me I can talk to them and they can hear me.
    The iphone is the worst cell phone on the market and best pocket computer you can buy.
    You decide.

  • Dropped calls with full signal

    When I am on my iPhone with a full or close to full signal, the sound cuts out for a while and then come backs a few times, and eventually drops the call. Its not every now and then...it's every call!
    I have synced and restored it...and neither helped.

    This does sound more like a faulty antenna than a SIM card problem to me. It may be that when the iPhone switches towers, as it does periodically, even when on full or near full signal strength, there is a time lag between disconnecting the previous tower and locking on to the new tower. This used to be a problem with old analogue mobiles that employed "hard" handoffs rather than "soft" handoffs, where the new tower is locked on to before disconnecting from the previous tower. In any event, with digital phones that still use hard handoffs, the technique has been refined to the point where the change is said to be imperceptible (does anyone know whether the iPhone employs hard or soft handoffs?).
    Try replacing the handset and see if that improves matters for you.

  • Outbound call failing with cause code 57

    Hi,
    our outbound calls to some numbers getting failed with cause code 57 and in ccsip messages i am getting 403 forbidden.
    i tried to change the payload type to 97 which was 98 but no success.
    the called number is 9-8955900
    the calling number is 8062300
    can any one help me..
    the ccsip messages and ccapi inout debug is..
    509022: *Jan  8 14:23:20.513: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255632752,feature_id:53127
    509023: *Jan  8 14:23:20.513: //678454/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       SPI Call Setup Request Is Success; Interface Type=9, FlowMode=1
    509024: *Jan  8 14:23:20.513: //678454/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
       Context=0x4AC5D304
    509025: *Jan  8 14:23:20.517: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
       Interface=0x48D4E620, Data Bitmask=0x0, Progress Indication=NULL(0),
       Connection Handle=0
    509026: *Jan  8 14:23:20.517: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
       Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
    509027: *Jan  8 14:23:20.537: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
    From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:02:15 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.6
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE,                                                                                         NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence
    Supported: X-cisco-srtp-fallback
    Supported: Geolocation
    Cisco-Guid: 2031538944-0000065536-0000027607-3188500672
    Session-Expires:  1800
    P-Asserted-Identity: "Asif CIPC" <sip:[email protected]>
    Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=yes;                                                                                        privacy=off
    Contact: <sip:[email protected]:5060;transport=tcp>
    Max-Forwards: 70
    Content-Type: application/sdp
    Content-Length: 240
    v=0
    o=CiscoSystemsCCM-SIP 2524413 1 IN IP4 192.168.12.190
    s=SIP Call
    c=IN IP4 192.168.33.5
    t=0 0
    m=audio 17706 RTP/AVP 18 101
    a=rtpmap:18 G729/8000
    a=ptime:20
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    509028: *Jan  8 14:23:20.553: //-1/7916D3000000/CCAPI/cc_api_display_ie_subfield                                                                                        s:
       cc_api_call_setup_ind_common:
       cisco-username=3064
       ----- ccCallInfo IE subfields -----
       cisco-ani=3064
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=8955900
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    509029: *Jan  8 14:23:20.553: /
    ASICO-DAM#/-1/7916D3000000/CCAPI/cc_api_call_setup_ind_common:
       Interface=0x48667600, Call Info(
       Calling Number=3064,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User,                                                                                         Passed, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown),
       Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=T                                                                                        RUE,
       Incoming Dial-peer=1, Progress Indication=NULL(0), Calling IE Present=TRUE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALS                                                                                        E), Call Id=678455
    509030: *Jan  8 14:23:20.553: //-1/7916D3000000/CCAPI/ccCheckClipClir:
       In: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pre                                                                                        sentation=Allowed)
    509031: *Jan  8 14:23:20.553: //-1/7916D3000000/CCAPI/ccCheckClipClir:
       Out: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pr                                                                                        esentation=Allowed)
    509032: *Jan  8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509033: *Jan  8 14:23:20.553: :cc_get_feature_vsa malloc success
    509034: *Jan  8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509035: *Jan  8 14:23:20.553:  cc_get_feature_vsa count is 13
    509036: *Jan  8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509037: *Jan  8 14:23:20.553: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255634768,feature_id:53128
    509038: *Jan  8 14:23:20.553: //678455/7916D3000000/CCAPI/cc_api_call_setup_ind_                                                                                        common:
       Set Up Event Sent;
       Call Info(Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passe                                                                                        d, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown))
    509039: *Jan  8 14:23:20.557: //678455/7916D3000000/CCAPI/cc_process_call_setup_                                                                                        ind:
       Event=0x48EE6200
    509040: *Jan  8 14:23:20.557: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
       Try with the demoted called number 8955900
    509041: *Jan  8 14:23:20.561: //678455/7916D3000000/CCAPI/ccCallSetContext:
       Context=0x476E35D0
    509042: *Jan  8 14:23:20.561: //678455/7916D3000000/CCAPI/cc_process_call_setup_                                                                                        ind:
       >>>>CCAPI handed cid 678455 with tag 1 to app "_ManagedAppProcess_Default"
    509043: *Jan  8 14:23:20.561: //678455/7916D3000000/CCAPI/ccCallProceeding:
       Progress Indication=NULL(0)
    509044: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
       Destination=, Calling IE Present=TRUE, Mode=0,
       Outgoing Dial-peer=20, Params=0x476E4AE0, Progress Indication=NULL(0)
    509045: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCheckClipClir:
       In: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed,                                                                                         Presentation=Allowed)
    509046: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCheckClipClir:
       Out: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed,                                                                                         Presentation=Allowed)
    509047: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
       Destination Pattern=.T, Called Number=8955900, Digit Strip=FALSE
    509048: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
       Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pres                                                                                        entation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown),
       Redirect Number=, Display Info=Asif CIPC
       Account Number=3064, Final Destination Flag=TRUE,
       Guid=7916D300-0001-0000-0000-6BD7BE0CA8C0, Outgoing Dial-peer=20
    509049: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/cc_api_display_ie_subf                                                                                        ields:
       ccCallSetupRequest:
       cisco-username=3064
       ----- ccCallInfo IE subfields -----
       cisco-ani=8062301
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=8955900
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    509050: *Jan  8 14:23:20.569: //678455/7916D3000000/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       Interface=0x48667600, Interface Type=3, Destination=, Mode=0x0,
       Call Params(Calling Number=8062301,(Calling Name=Asif CIPC)(TON=Unknown, NPI=                                                                                        Unknown, Screening=User, Passed, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
       Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=20                                                                                        , Call Count On=FALSE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl                                                                                        ication Call Id=)
    509051: *Jan  8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509052: *Jan  8 14:23:20.569: :cc_get_feature_vsa malloc success
    509053: *Jan  8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509054: *Jan  8 14:23:20.569:  cc_get_feature_vsa count is 14
    509055: *Jan  8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509056: *Jan  8 14:23:20.569: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255629840,feature_id:53129
    509057: *Jan  8 14:23:20.569: //678456/7916D3000000/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
    509058: *Jan  8 14:23:20.573: //678456/7916D3000000/CCAPI/ccCallSetContext:
       Context=0x476E4A90
    509059: *Jan  8 14:23:20.573: //678455/7916D3000000/CCAPI/ccSaveDialpeerTag:
       Outgoing Dial-peer=20
    509060: *Jan  8 14:23:20.577: //678456/7916D3000000/CCAPI/cc_api_call_proceeding                                                                                        :
       Interface=0x48667600, Progress Indication=NULL(0)
    509061: *Jan  8 14:23:20.585: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
    Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=ye                                                                                        s;privacy=off
    From: "Asif CIPC" <sip:[email protected]>;tag=EA475228-24AE
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 2031538944-0000065536-0000027607-3188500672
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF                                                                                        Y, INFO, REGISTER
    CSeq: 101 INVITE
    Timestamp: 1389191000
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Max-Forwards: 69
    Session-Expires:  1800
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 274
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 5380 1731 IN IP4 172..XX.XX.XX
    s=SIP Call
    c=IN IP4 172..XX.XX.XX
    t=0 0
    m=audio 19502 RTP/AVP 18 101
    c=IN IP4 172..XX.XX.XX
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=yes
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:20
    509062: *Jan  8 14:23:20.589: //678455/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 100 Trying
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
    From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Allow-Events: kpml, telephone-event
    Server: Cisco-SIPGateway/IOS-12.x
    Content-Length: 0
    509063: *Jan  8 14:23:20.605: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Received:
    SIP/2.0 100 Trying
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
    Call-ID: [email protected]
    From: "Asif CIPC"<sip:[email protected]>;tag=EA475228-24AE
    To: <sip:[email protected]>
    CSeq: 101 INVITE
    Content-Length: 0
    509064: *Jan  8 14:23:20.677: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Received:
    SIP/2.0 403 Forbidden
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
    Record-Route: <sip:10.205.20.50:5060;transport=udp;lr>
    Call-ID: [email protected]
    From: "Asif CIPC"<sip:[email protected]>;tag=EA475228-24AE
    To: <sip:[email protected]>;tag=sbc0804k7h28358
    CSeq: 101 INVITE
    Reason: Q.850;cause=57;text="bearer capability not authorized"
    Warning: 399 - "SoftX3000 R601-CCU Rel POS:[3103] Release from CR"
    Content-Length: 0
    509065: *Jan  8 14:23:20.677: //678456/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        ed:
       Cause Value=57, Interface=0x48667600, Call Id=678456
    509066: *Jan  8 14:23:20.677: //678456/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        ed:
       Call Entry(Responsed=TRUE, Cause Value=57, Retry Count=0)
    509067: *Jan  8 14:23:20.681: //678455/7916D3000000/CCAPI/ccCallReleaseResources                                                                                        :
       release reserved xcoding resource.
    509068: *Jan  8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallSetAAA_Accountin                                                                                        g:
       Accounting=0, Call Id=678456
    509069: *Jan  8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallDisconnect:
       Cause Value=57, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect C                                                                                        ause=57)
    509070: *Jan  8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallDisconnect:
       Cause Value=57, Call Entry(Responsed=TRUE, Cause Value=57)
    509071: *Jan  8 14:23:20.681: //678456/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Disposition=0, Interface=0x48667600, Tag=0x0, Call Id=678456,
       Call Entry(Disconnect Cause=57, Voice Class Cause Code=0, Retry Count=0)
    509072: *Jan  8 14:23:20.685: //678456/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Call Disconnect Event Sent
    509073: *Jan  8 14:23:20.685: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509074: *Jan  8 14:23:20.685: :cc_free_feature_vsa freeing 4AD76408
    509075: *Jan  8 14:23:20.685: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509076: *Jan  8 14:23:20.685:  vsacount in free is 13
    509077: *Jan  8 14:23:20.685: //678455/7916D3000000/CCAPI/ccCallDisconnect:
       Cause Value=57, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect C                                                                                        ause=0)
    509078: *Jan  8 14:23:20.689: //678455/7916D3000000/CCAPI/ccCallDisconnect:
       Cause Value=57, Call Entry(Responsed=TRUE, Cause Value=57)
    509079: *Jan  8 14:23:20.693: //678455/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 403 Forbidden
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
    From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>;tag=EA475298-106E
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Allow-Events: kpml, telephone-event
    Server: Cisco-SIPGateway/IOS-12.x
    Reason: Q.850;cause=57
    Content-Length: 0
    509080: *Jan  8 14:23:20.693: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    ACK sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
    From: "Asif CIPC" <sip:[email protected]>;tag=EA475228-24AE
    To: <sip:[email protected]>;tag=sbc0804k7h28358
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    Max-Forwards: 70
    CSeq: 101 ACK
    Allow-Events: telephone-event
    Content-Length: 0
    509081: *Jan  8 14:23:20.709: //678454/xxxxxxxxxxxx/CCAPI/ccCallDisconnect:
       Cause Value=0, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Ca                                                                                        use=0)
    509082: *Jan  8 14:23:20.709: //678454/xxxxxxxxxxxx/CCAPI/ccCallDisconnect:
       Cause Value=0, Call Entry(Responsed=TRUE, Cause Value=0)
    509083: *Jan  8 14:23:20.709: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    ACK sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
    From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>;tag=EA475298-106E
    Date: Wed, 08 Jan 2014 14:02:15 GMT
    Call-ID: [email protected]
    Max-Forwards: 70
    CSeq: 101 ACK
    Allow-Events: presence
    Content-Length: 0
    509084: *Jan  8 14:23:20.713: //678455/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Disposition=0, Interface=0x48667600, Tag=0x0, Call Id=678455,
       Call Entry(Disconnect Cause=57, Voice Class Cause Code=0, Retry Count=0)
    509085: *Jan  8 14:23:20.717: //678455/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Call Disconnect Event Sent
    509086: *Jan  8 14:23:20.717: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509087: *Jan  8 14:23:20.717: :cc_free_feature_vsa freeing 4AD77748
    509088: *Jan  8 14:23:20.717: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509089: *Jan  8 14:23:20.717:  vsacount in free is 12
    509090: *Jan  8 14:23:20.721: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Disposition=0, Interface=0x48D4E620, Tag=0x0, Call Id=678454,
       Call Entry(Disconnect Cause=0, Voice Class Cause Code=0, Retry Count=0)
    509091: *Jan  8 14:23:20.721: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Call Disconnect Event Sent
    509092: *Jan  8 14:23:20.721: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509093: *Jan  8 14:23:20.721: :cc_free_feature_vsa freeing 4AD76F68
    509094: *Jan  8 14:23:20.721: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509095: *Jan  8 14:23:20.721:  vsacount in free is 11
    509096: *Jan  8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivat                                                                                        e:
       Interface=0x48D4E620, Interface Type=9, Destination=0.0.0.0, Mode=0x0,
       Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screeni                                                                                        ng=Not Screened, Presentation=Allowed),
       Called Number=(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
       Subscriber Type Str=, FinalDestinationFlag=FALSE, Outgoing Dial-peer=0, Call                                                                                         Count On=FALSE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl                                                                                        ication Call Id=)
    509097: *Jan  8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509098: *Jan  8 14:23:20.725: :cc_get_feature_vsa malloc success
    509099: *Jan  8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509100: *Jan  8 14:23:20.729:  cc_get_feature_vsa count is 12
    509101: *Jan  8 14:23:20.729: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509102: *Jan  8 14:23:20.729: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255632752,feature_id:53130
    509103: *Jan  8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       SPI Call Setup Request Is Success; Interface Type=9, FlowMode=1
    509104: *Jan  8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
       Context=0x4AC5D1C4
    509105: *Jan  8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
       Interface=0x48D4E620, Data Bitmask=0x0, Progress Indication=NULL(0),
       Connection Handle=0
    509106: *Jan  8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
       Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
    509107: *Jan  8 14:23:20.753: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6adee3e42a498
    From: "Asif CIPC" <sip:[email protected]>;tag=2524415~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:02:15 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.6
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE,                                                                                         NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence
    Supported: X-cisco-srtp-fallback
    Supported: Geolocation
    Cisco-Guid: 2031538944-0000065536-0000027608-3188500672
    Session-Expires:  1800
    P-Asserted-Identity: "Asif CIPC" <sip:[email protected]>
    Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=yes;                                                                                        privacy=off
    Contact: <sip:[email protected]:5060;transport=tcp>
    Max-Forwards: 70
    Content-Type: application/sdp
    Content-Length: 240
    v=0
    o=CiscoSystemsCCM-SIP 2524415 1 IN IP4 192.168.12.190
    s=SIP Call
    c=IN IP4 192.168.33.5
    t=0 0
    m=audio 17932 RTP/AVP 18 101
    a=rtpmap:18 G729/8000
    a=ptime:20
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    509108: *Jan  8 14:23:20.769: //-1/7916D3000000/CCAPI/cc_api_display_ie_subfield                                                                                        s:
       cc_api_call_setup_ind_common:
       cisco-username=3064
       ----- ccCallInfo IE subfields -----
       cisco-ani=3064
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=8955900
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    509109: *Jan  8 14:23:20.769: //-1/7916D3000000/CCAPI/cc_api_call_setup_ind_comm                                                                                        on:
       Interface=0x48667600, Call Info(
       Calling Number=3064,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User,                                                                                         Passed, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown),
       Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=T                                                                                        RUE,
       Incoming Dial-peer=1, Progress Indication=NULL(0), Calling IE Present=TRUE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALS                                                                                        E), Call Id=678458
    509110: *Jan  8 14:23:20.769: //-1/7916D3000000/CCAPI/ccCheckClipClir:
       In: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pre                                                                                        sentation=Allowed)
    509111: *Jan  8 14:23:20.773: //-1/7916D3000000/CCAPI/ccCheckClipClir:
       Out: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pr                                                                                        esentation=Allowed)
    509112: *Jan  8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509113: *Jan  8 14:23:20.773: :cc_get_feature_vsa malloc success
    509114: *Jan  8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509115: *Jan  8 14:23:20.773:  cc_get_feature_vsa count is 13
    509116: *Jan  8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509117: *Jan  8 14:23:20.773: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255634768,feature_id:53131
    509118: *Jan  8 14:23:20.773: //678458/7916D3000000/CCAPI/cc_api_call_setup_ind_                                                                                        common:
       Set Up Event Sent;
       Call Info(Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passe                                                                                        d, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown))
    509119: *Jan  8 14:23:20.773: //678458/7916D3000000/CCAPI/cc_process_call_setup_                                                                                        ind:
       Event=0x48EE6200
    509120: *Jan  8 14:23:20.777: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
       Try with the demoted called number 8955900
    509121: *Jan  8 14:23:20.777: //678458/7916D3000000/CCAPI/ccCallSetContext:
       Context=0x476D5190
    509122: *Jan  8 14:23:20.777: //678458/7916D3000000/CCAPI/cc_process_call_setup_                                                                                        ind:
       >>>>CCAPI handed cid 678458 with tag 1 to app "_ManagedAppProcess_Default"
    509123: *Jan  8 14:23:20.777: //678458/7916D3000000/CCAPI/ccCallProceeding:
       Progress Indication=NULL(0)
    509124: *Jan  8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
       Destination=, Calling IE Present=TRUE, Mode=0,
       Outgoing Dial-peer=20, Params=0x476DCE60, Progress Indication=NULL(0)
    509125: *Jan  8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCheckClipClir:
       In: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed,                                                                                         Presentation=Allowed)
    509126: *Jan  8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCheckClipClir:
       Out: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed,                                                                                         Presentation=Allowed)
    509127: *Jan  8 14:23:20.785: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
       Destination Pattern=.T, Called Number=8955900, Digit Strip=FALSE
    509128: *Jan  8 14:23:20.785: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
       Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pres                                                                                        entation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown),
       Redirect Number=, Display Info=Asif CIPC
       Account Number=3064, Final Destination Flag=TRUE,
       Guid=7916D300-0001-0000-0000-6BD8BE0CA8C0, Outgoing Dial-peer=20
    509129: *Jan  8 14:23:20.785: //678458/7916D3000000/CCAPI/cc_api_display_ie_subf                                                                                        ields:
       ccCallSetupRequest:
       cisco-username=3064
       ----- ccCallInfo IE subfields -----
       cisco-ani=8062301
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=8955900
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    509130: *Jan  8 14:23:20.785: //678458/7916D3000000/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       Interface=0x48667600, Interface Type=3, Destination=, Mode=0x0,
       Call Params(Calling Number=8062301,(Calling Name=Asif CIPC)(TON=Unknown, NPI=                                                                                        Unknown, Screening=User, Passed, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
       Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=20                                                                                        , Call Count On=FALSE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl                                                                                        ication Call Id=)
    509131: *Jan  8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509132: *Jan  8 14:23:20.785: :cc_get_feature_vsa malloc success
    509133: *Jan  8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509134: *Jan  8 14:23:20.785:  cc_get_feature_vsa count is 14
    509135: *Jan  8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509136: *Jan  8 14:23:20.785: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255629840,feature_id:53132
    509137: *Jan  8 14:23:20.789: //678459/7916D3000000/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
    509138: *Jan  8 14:23:20.789: //678459/7916D3000000/CCAPI/ccCallSetContext:
       Context=0x476DCE10
    509139: *Jan  8 14:23:20.789: //678458/7916D3000000/CCAPI/ccSaveDialpeerTag:
       Outgoing Dial-peer=20
    509140: *Jan  8 14:23:20.793: //678459/7916D3000000/CCAPI/cc_api_call_proceeding                                                                                        :
       Interface=0x48667600, Progress Indication=NULL(0)
    509141: *Jan  8 14:23:20.801: //678459/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CE197B
    Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=ye                                                                                        s;privacy=off
    From: "Asif CIPC" <sip:[email protected]>;tag=EA475304-26C5
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 2031538944-0000065536-0000027608-3188500672
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF                                                                                        Y, INFO, REGISTER
    CSeq: 101 INVITE
    Timestamp: 1389191000
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Max-Forwards: 69
    Session-Expires:  1800
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 274
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 9218 9584 IN IP4 172..XX.XX.XX
    s=SIP Call
    c=IN IP4 172..XX.XX.XX
    t=0 0
    m=audio 16868 RTP/AVP 18 101
    c=IN IP4 172..XX.XX.XX
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=yes
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:20
    509142: *Jan  8 14:23:20.805: //678458/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    509163: *Jan  8 14:23:20.945: //678458/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Call Disconnect Event Sent
    509164: *Jan  8 14:23:20.945: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509165: *Jan  8 14:23:20.945: :cc_free_feature_vsa freeing 4AD77748
    509166: *Jan  8 14:23:20.945: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509167: *Jan  8 14:23:20.945:  vsacount in free is 12
    509168: *Jan  8 14:23:32.517: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    OPTIONS sip:172..XX.XX.XX:5060 SIP/2.0
    Via: SIP/2.0/UDP 10.205.20.50:5060;branch=z9hG4bKhs8ak5845ch42p7cff35k1ap3T02677
    Call-ID: isbchh12748fcsk155w58p151kks36fww24s@SoftX3000
    From: <sip:172..XX.XX.XX:5060>;tag=sbc0806pa8fp7w7
    To: <sip:172..XX.XX.XX>
    CSeq: 1 OPTIONS
    Max-Forwards: 70
    Content-Length: 0
    509169: *Jan  8 14:23:32.525: //678460/495AB05FB187/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 200 OK
    Via: SIP/2.0/UDP 10.205.20.50:5060;branch=z9hG4bKhs8ak5845ch42p7cff35k1ap3T02677
    From: <sip:172..XX.XX.XX:5060>;tag=sbc0806pa8fp7w7
    To: <sip:172..XX.XX.XX>;tag=EA4780CC-582
    Date: Wed, 08 Jan 2014 14:23:32 GMT
    Call-ID: isbchh12748fcsk155w58p151kks36fww24s@SoftX3000
    Server: Cisco-SIPGateway/IOS-12.x
    CSeq: 1 OPTIONS
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF                                                                                        Y, INFO, REGISTER
    Allow-Events: telephone-event
    Accept: application/sdp
    Supported: timer,resource-priority,replaces,sdp-anat
    Content-Type: application/sdp
    Content-Length: 170
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 8937 2437 IN IP4 172..XX.XX.XX
    s=SIP Call
    c=IN IP4 192.168.33.5
    t=0 0
    m=audio 0 RTP/AVP 18 0 8 9 4 2 15 3
    c=IN IP4 192.168.33.5
    u all
    and the config is
    voice service voip
    ip address trusted list
      ipv4 172.XX.XX.XX 255.255.255.255
    dtmf-interworking rtp-nte
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    no supplementary-service h450.2
    no supplementary-service h450.3
    no supplementary-service h225-notify cid-update
    redirect ip2ip
    h323
      session transport udp
      h245 tunnel disable
    sip
      session transport tcp
      rel1xx disable
      registrar server expires max 3600 min 3500
      transport switch udp tcp
      redirect contact order best-match
      asymmetric payload full
      g729 annexb-all
    voice class codec 1
    codec preference 1 g711alaw
    codec preference 2 g711ulaw
    codec preference 3 g729r8
    codec preference 4 g729br8
    and the dial-peer through the calls will go out is
    dial-peer voice 20 voip
    description ***TO-OUT***
    translation-profile outgoing OUT-SIP
    destination-pattern .T
    progress_ind progress enable 8
    rtp payload-type cisco-codec-fax-ack 112
    rtp payload-type nte 97
    session protocol sipv2
    session target ipv4:10.205.20.50:5060
    session transport udp
    voice-class codec 1
    voice-class sip bind control source-interface FastEthernet0/0
    voice-class sip bind media source-interface FastEthernet0/0
    dtmf-relay rtp-nte
    no vad

    Hi Nadeem,
    our setup is like
                                                                vpn link
    call manager ------head office(router)----------------------------------brach router(gateway)------------------ip phone(branch)
    The call flow is
                                                                                                                  sip
    IP Phone---->brach GW-------------->call manager------------------>branch GW------------------->ITSP
    there is no subscriber at branch side, so the outbound call should travel to call manager at head office and then get exit from branch gateway to ITSP through sip line.

  • The AcquireConnection method call failed with error code 0xC0202009.

    I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
    - Pre-execute (Error)
    Messages
    Error 0xc0202009: {F1B3B35C-FAE3-48F6-A169-4E4D8D99F9B6}: An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft JET Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (SQL Server Import and Export Wizard)
    Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "DestinationConnectionExcel" failed with error code 0xC0202009.
     (SQL Server Import and Export Wizard)
    Error 0xc004701a: Data Flow Task: component "Destination 64 - production_effectivities" (7042) failed the pre-execute phase and returned error code 0xC020801C.
     (SQL Server Import and Export Wizard)
    The entire package is running on one machine. The data source is SQL Server 2005 and the destination (this happens with both of them) is Excel or Access. Either way I cannot get the package which the wizard generated to run at all. This error occurs after the first table is exported. I'm running on WinXP SP2 with 2005 Developer and ALL components installed except analysis services.
    Anyone else have this problem or know the solution?
    Jeff

    I am getting the same error. My Destination and source both are on SQL Server 2005 on the same box.
    I am using SQL- Code for Source and and table as destination. When the package runnes under Transaction- TransactionOption-Supported then the packages excuted fine but it fails when i change the Transaction- TransactionOption to Required.
    It fails with following error code.
    [OLE DB Destination [22]] Error: The AcquireConnection method call to the connection manager "FMFCLSQADB01.DWH_Rakesh" failed with error code 0xC0202009.
    [DTS.Pipeline] Error: component "OLE DB Destination" (22) failed the pre-execute phase and returned error code 0xC020801C.
    [Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
    [Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
    When i change the source SQL query to Table or View then it works fine.
    Thanks for any suggestion.
    Regards
    Rakesh
    Now, my issues related to “SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction."…..”. are fixed.
    This is one of the very common errors that comes up in SSIS (SQL Server Integration service) 
    I have faced this issue for at-least two occasions. Both of them have one common setting: “TransactionOption” was set to “Required”.
    In first case, I had multiple dataflow tasks but there were no sequence given. There were no error if I ran the package with TransactionOption=Supported. But when I ran the package in TransactionOption= Required, it got failed.
    To fix the issue I have changed my package and put the entire dataflow task one after another (connected thru Constraint).  
    In another case, where I was doing data transfer from one server to another, I had to configure the MSDTC.

  • Decision Service calls failing with connection refused

    Hi All,
    Breifing of the bpel process - Async bpel process XX_BPEL_ASYNC_002 calls decision services and a sync bpel process XX_BPEL_SYNC_001.
    We have moved to cluster 10.1.3.5.0 from 10.1.3.3.0 and the deployement of the bpel process and the decision service done on two nodes i.e., node51 and node55.
    But the bpel process is able to call the decision service only when the node 51 is UP and running, but if node 51 is down and node 55 is up and running it is failing with connection refused error. It is also working when 55 is DOWN and 051 is UP.
    the exact error is:
    exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused.
    We are using file based repository.
    It is failing when it tries to call particular url:
    http://loadbalancerurl:7777/orabpel/domain001/XX_BPEL_ASYNC_002/1.0/decisionservices.decs
    Can anyone please help me or advice me for finding some solution.
    Thanks
    Sreejit

    Hi Fatsah,
    It has been a while since we resolved this problem. But these were  the basic steps that we had taken.
    The receiver was configured a File adatpter with FTP:
    Port: 10021
    Connection security : FTPS (FTP using SSL/TLS) for Control and Data Connection
    Command Order: AUTH TLS,USER,PASS,PBSZ,PROT
    Problem: The message was blocked in our firewall.
    FTPS in this case used 10021 as the control port and the firewall allowed to pass the control request.
    Once the connection was accepted at the control level, it generated a random port number  to pass data on the channel.
    This random port number was blocked in the firewall.
    We monitored the data port numbers generated at firewall. Then we configured the firewall to open any port number  between the specific IP addresses of the sender and the receiver. That resolved the problem.
    Hope this helps!
    Please give points if this is helpful.
    Thank you.
    Dharmasiri Amith

  • UK 02 - often unable to connect to site even with full signal

    Sometimes my iPhone will refuse to connect to web sites or the email server, even though I have a full signal and gprs with or without edge. It's been doing this frequently since the latest firmware update and it's getting a bit annoying. It doesn't seem to matter where I am located.

    I don't have an answer. However, since your question is not about Acrobat forms, but Designer forms, you need to ask in the LiveCycle forum that deals with Desginer forms.

  • Outgoing to ISDN calls fail with cause 0x2C

    Cisco 2821 with 4 E1 connected to PSTN. Most outgoing calls flow without any issues, but sometimes fails (debug isdn error shows "CCPMSG_OutCall: fails with cause 0x2C"). I see enough free timeslots in E1 at this time. This E1 using for outgoing calls only, incoming calls come via other E1.
    Router configuration:
    controller E1 0/1/1
    framing NO-CRC4
    pri-group timeslots 1-31
    interface Serial0/1/1:15
    no ip address
    encapsulation hdlc
    no logging event link-status
    isdn switch-type primary-net5
    isdn timer T303 120000
    isdn incoming-voice voice
    isdn map address .* plan isdn type national
    isdn send-alerting
    isdn negotiate-bchan resend-setup
    isdn bchan-number-order ascending round-robin
    isdn sending-complete
    no isdn outgoing display-ie
    trunk-group PSTN 10
    no cdp enable

    "debug isdn q931 detailed" & "debug isdn error" show:
    ISDN Se0/1/1:15 Q931d: Default type/plan 0x0 0x1 sw-type 18 Calling number 4242510458 isdn_map 0 mask 0x3022
    ISDN Se0/1/1:15 Q931d: Calling plan/type unspecified in call_decode, so ignored.
    ISDN Se0/1/1:15 Q931d: No call_decode, isdn default set
    ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 4242510458/.*, (regexp)
    ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 4242510458, isdn/unknown to isdn/national; Oct3a 0x81
    ISDN Se0/1/1:15 Q931d: Default type/plan 0x0 0x1 sw-type 18 Called number 9262151 isdn_map 0 mask 0x3022
    ISDN Se0/1/1:15 Q931d: Called plan/type unspecified in call_decode, so ignored.
    ISDN Se0/1/1:15 Q931d: No call_decode, isdn default set
    ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 9262151/.*, (regexp)
    ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 9262151, isdn/unknown to isdn/national
    ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: Comparing 4242510458/.*, (regexp)
    ISDN Se0/1/1:15 Q931d: isdn_parser_map_lkup: overriding plan/type for 4242510458, isdn/unknown to isdn/national
    ISDN Se0/1/1:15 **ERROR**: CCPMSG_OutCall: fails with cause 0x2C
    ISDN Se0/1/1:15 Q931d: L3IF_rx_L2_pak: received data
    080285335A
    ISDN Se0/1/1:15 Q931d: L3_Go: source 0x020A, event 0x005A, call id 0x0000, int id 0x0
    ISDN Se0/1/1:15 Q931d: L3_Go: event 0x5A cr_len 2 cr 1331
    ISDN Se0/1/1:15 Q931d: L3_Go: call_id 0x84C9 cr 0x533 state 19 event 0x5A ces 1
    ISDN Se0/1/1:15 Q931d: L3_ProcessEvent: callref = 0x0533 RELEASE_COMP:U19_ReleaseComp(nlcb)
    ISDN Se0/1/1:15 Q931d: L3_state_change: callref 0x0533 old RELEASE_REQUEST, new NULL_STATE

  • Fusion Apps web service call fails with error access denied (oracle.wsm.security.WSFunctionPermission)

    Hello Guru,
    I am trying to call a supplier service from SOA/OSB.
    But while calling the service it is failing with the below error message
    access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/poz/suppliers/supplierService/SupplierService#getSupplierVO invoke)
    As per OER cookbook i have attached the "oracle/wss_username_token_client_policy" to the Fusion  apps web service.
    I am trying to pass security credentials to the service by using all the methods... through composite ..through bpel through wsse header but in all cases i am getting similar error.
    Please let me know if some one has called the fusion apps web service to create a supplier of solution to my problem  as mentioned above.

    Hi Sai,
        Thanks for the quick and correct response. Yes, after doing the research, I'm also came to same conclusion. But what stops me here is that where exactly I need to check for this permission.
    I mean the theory what I built on this Authorization/Permission is that:
       For the resource - WebService (SupplierService), there is an assigned application role for which the Entitlement/Permission is provided.
    Pls. help me in the below items:
    a. What is the application role(in role hierarchy) assigned to this resource(Webservice). Which page I need to check(navigation) this and the required credentials..
    b. What is the Entitlement provided for this application role for this operation (getSupplierVO) invoke.. Which page I need to check(navigation) this and the required credentials..
    Thanks in Advance.
    Thanks & Regards
    Madhu

  • FusionApps web service call fails with error access denied (oracle.wsm.security.WSFunctionPermission)

    Hi Gurus,
    I started test this webservice from EM (Test Web Service)
    But while calling the service it is failing with the below error message
    access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/poz/suppliers/supplierService/SupplierService#getSupplierVO invoke)
    As per OER cookbook i have attached the "oracle/wss_username_token_client_policy" to the Fusion  apps web service.
    I am trying to pass security credentials to the service by using all the methods... through composite ..through bpel through wsse header but in all cases i am getting similar error.
    Please let me know if some one has called the fusion apps web service to create a supplier of solution to my problem  as mentioned above.
    Is it any policy error or the authorization error ...
    Are there any navigation steps I can check the existed permission on this resource etc..,
    Thanks in Advance

    Hi Sai,
        Thanks for the quick and correct response. Yes, after doing the research, I'm also came to same conclusion. But what stops me here is that where exactly I need to check for this permission.
    I mean the theory what I built on this Authorization/Permission is that:
       For the resource - WebService (SupplierService), there is an assigned application role for which the Entitlement/Permission is provided.
    Pls. help me in the below items:
    a. What is the application role(in role hierarchy) assigned to this resource(Webservice). Which page I need to check(navigation) this and the required credentials..
    b. What is the Entitlement provided for this application role for this operation (getSupplierVO) invoke.. Which page I need to check(navigation) this and the required credentials..
    Thanks in Advance.
    Thanks & Regards
    Madhu

  • Call failed with airtel network

    I was using Vodafone network, recently shifted to Airtel. My phone is unlocked and network is active. I am able to receive calls and use data over 3G. I am even able to receive calls. But I am not able to make any calls. Every time I try to call I get Call failed.
    I visited Airtel office, they put sim in other phone and outgoing calls was working fine. But its not working in my iPhone.
    I even tried resetting my network, still no help.
    Please help

    I had the same exact problem ,then I read in one of these discussions that the issue is with the caller id. though we cannot turn it ON or Off but somehow even checking the status of the caller ID did the trick and now I am able to make outgoing calls as well. My phone is iphone 4 with airtel( recently ported from vodafone).

Maybe you are looking for

  • Pulse train generation fails with certain values for "number of samples"

    I'm generating a retriggerable analog output signal, and so I'm using a counter as the sample clock (see: Retriggerable AI Using Retriggerable Counter). I am finding that, above a certain number of samples, and only for certain values of the number o

  • Why does my font color change when I add an image to InDesign?

    Hello, I am doing a page layout in InDesign and I am using a light blue font for my title but when I add an image from Photoshop, the font color turns dark blue. When I open the InDesign file in Adobe Acrobat, my title is still dark blue. It's only w

  • White balance, Export and shutterfly

    I thought I was doing everything right with the holiday family shots: shot RAW, then corrected white balance as needed (often, cool them down slightly) in LR3.3 Develop.  A test print (color managed by LR) on my home inkjet looked just like on-screen

  • For each loop with multidimensional arrays?

    Hi.I have a problem with for each and multidimensional combination. public class TestCards static int[][] dizi={{1,2},{3,4}}; static int t ; public static void main(String[]args)      for (int[] i : dizi)      System.out.println(i); The result of the

  • AE 5.1 - User provisioning issue - new user provisioned at end of request

    Hi All, re: AE 5.1 - User provisioning issue - new user provisioned at end of request when AE Config is set to NO We have an interesting issue. An Access Enforcer Change Request was initiated with the incorrect userID (the userID did not yet exist in