Call for Feedback on SDN content

Hi all,
we would be happy to receive your feedback on the information about AccAD that is currently available on SDN ([http://sdn.sap.com/irj/sdn/nw-accad|http://sdn.sap.com/irj/sdn/nw-accad]).
Do you like any presentation, demo or blog especially? Is there any information missing so far that you would appreciate? Is there anything that we could improve with regards to the current material?
Please tell us your opinion here, so we can incorporate this into our pages here on SDN.
Best regards
Jana

Hi Jana,
Thanx for giving us the opportunity to share our AccAD Experience by means of documentation:
Let me share how did I succeed to install and configure AccAD:
My First Attempt:
First of all I tried to use the installation giudes given on SDN to complete the SFE and CFE installations.
As I don't have a Deep Network Knowledge (don't know whether it is required), documentation refers to Virtual IP and other network related info. At most of our customers, we're not able to find anyone to work with us by means of OS/DB or network. Thus we need to do everything.
So, installation guides confused me and I'm not able to install it. As this is a new product, there aren't enough knowledge and experience shared over SDN or internet.
So I failed
My Search for Detailed Info:
I searched Service Marketplace and got help from local SAP Office to get info and reached the RKT step-by-step guides or CAMs and then I was able to install and understand it all.
So I guess, those CAMs or step-by-step guides must be shared over SDN like Portal HowTo Guides
Regards

Similar Messages

Revising the Adobe CMM - call for feedback

The first Adobe CMM was released a little more than a year ago. Happy birthday!
It's been downloaded more than 50,000 times. (But does anyone actually use it?)
Two companies - CGS Software and Color Solutions - have licensed the Adobe CMM for their products.
The Adobe CMM output - within the limitations of the CMM framework and APIs - should match the color-managed conversions in Adobe applications.
For applications that use the OS CMS (ColorSync, ICM, or WCS), installing the Adobe CMM may provide some benefits. The Adobe CMM extends the existing OS-level CMS with an alternate color conversion engine with which a color expert can build cross-vendor, cross-platform, workflows with consistent color conversions.
It's time to figure out what conversion features to include in the next revision.
A few bugs will be fixed.
We're considering providing supplemental APIs to control BPC, but this would be useless to all but those who actually write code to call the Adobe CMM directly. Do you?
We'd like to know how (and why) you use the CMM, about bugs in the CMM, or your CMM feature requests.
Thanks,
Lars

Hello, Ken
We've encountered following problems with Adobe CMM:
1.) Adobe CMM reverses channel order for bitmap formats like BM_xRGBQUADS, BM_CMYKQUADS and probably others. Here you have MS specification: http://msdn2.microsoft.com/en-us/library/ms536563(VS.85).aspx
2.) Adobe CMM doesn't accept 'spac' class ICC profiles. For example we have Lab->Lab identity profile, which we use to assemble ICC transformation like Lab->CMYK, CMYK->Lab. Microsoft CMM handles them very well.
3.) There is serious problem with BM_GRAY bitmap format. At one place MS claims that BM_GRAY is 32 bits per pixel and only the 8 bit gray-scale value is used. In table of bitmap formats MS claims that BM_GRAY is 8 bit per pixel format. Both interpretations can be found in MS spec: http://msdn2.microsoft.com/en-us/library/ms536563(VS.85).aspx Adobe CMM uses 32 bits, MS CMM use 8 bits per pixel.
Best regards, Jerzy Balamut

A call for feedback

Hi all,
Just wanted to remind everyone about the OSMF Beta 1 survey. Your feedback is critical for helping us gauge the overall state of the framework, and this may be the last opportunity for you to influence the 1.0 release. Here's the link:
https://www.surveymonkey.com/s/XWQVS92
The survey will be taken down EOD tomorrow (3/16), so if you have feedback for us please take a few minutes to respond.
Thanks,
Brian Riggs - OSMF Team

Not surprisingly that crash looks like it's related to the Hyperlinks panel.
For those of us not sure what your other issue was, or if it's realted, could you provide full details here of what you are doing and what happens?

Call for participation: OASIS Enterprise Key Management Infrastructure TC

We would welcome your participation in this process. Thank you.
Arshad Noor
StrongAuth, Inc.
To: OASIS members & interested parties
A new OASIS technical committee is being formed. The OASIS Enterprise Key
Management Infrastructure (EKMI) Technical Committee has been proposed by the
members of OASIS listed below. The proposal, below, meets the requirements of
the OASIS TC Process [a]. The TC name, statement of purpose, scope, list of
deliverables, audience, and language specified in the proposal will constitute
the TC's official charter. Submissions of technology for consideration by the
TC, and the beginning of technical discussions, may occur no sooner than the
TC's first meeting.
This TC will operate under our 2005 IPR Policy. The eligibility
requirements for becoming a participant in the TC at the first meeting (see
details below) are that:
(a) you must be an employee of an OASIS member organization or an individual
member of OASIS;
(b) the OASIS member must sign the OASIS membership agreement [c];
(c) you must notify the TC chair of your intent to participate at least 15
days prior to the first meeting, which members may do by using the "Join this
TC" button on the TC's public page at [d]; and
(d) you must attend the first meeting of the TC, at the time and date fixed
below.
Of course, participants also may join the TC at a later time. OASIS and the TC
welcomes all interested parties.
Non-OASIS members who wish to participate may contact us about joining OASIS
[c]. In addition, the public may access the information resources maintained for
each TC: a mail list archive, document repository and public comments facility,
which will be linked from the TC's public home page at [d].
Please feel free to forward this announcement to any other appropriate lists.
OASIS is an open standards organization; we encourage your feedback.
Regards,
Mary
Mary P McRae
Manager of TC Administration, OASIS
email: mary.mcrae(AT)oasis-open.org
web: www.oasis-open.org
a) http://www.oasis-open.org/committees/process.php
b) http://www.oasis-open.org/who/intellectualproperty.php
c) See http://www.oasis-open.org/join/
d) http://www.oasis-open.org/committees/tc_home.php?wg_abbrev=ekmi
CALL FOR PARTICIPATION
OASIS Enterprise Key Management Infrastructure (EKMI) TC
Name
OASIS Enterprise Key Management Infrastructure (EKMI) TC
Statement of Purpose
Public Key Infrastructure (PKI) technology has been around for more than a
decade, and many companies have adopted it to solve specific problems in the
area of public-key cryptography. Public-key cryptography has been embedded in
some of the most popular tools -- web clients and servers, VPN clients and
servers, mail user agents, office productivity tools and many industry-specific
applications -- and underlies many mission-critical environments today.
Additionally, there are many commercial and open-source implementations of PKI
software products available in the market today. However, many companies across
the world have recognized that PKI by itself, is not a solution.
There is also the perception that most standards in PKI have already been
established by ISO and the PKIX (IETF), and most companies are in
operations-mode with their PKIs -- just using it, and adopting it to other
business uses within their organizations. Consequently, there is not much left
to architect and design in the PKI community.
Simultaneously, there is a new interest on the part of many companies in the
management of symmetric keys used for encrypting sensitive data in their
computing infrastructure. While symmetric keys have been traditionally managed
by applications doing their own encryption and decryption, there is no
architecture or protocol that provides for symmetric key management services
across applications, operating systems, databases, etc. While there are many
industry standards around protocols for the life-cycle management of asymmetric
(or public/private) keys -- PKCS10, PKCS7, CRMF, CMS, etc. -- however, there is
no standard that describes how applications may request similar life-cycle
services for symmetric keys, from a server and how public-key cryptography may
be used to provide such services.
Key management needs to be addressed by enterprises in its entirety -- for both
symmetric and asymmetric keys. While each type of technology will require
specific protocols, controls and management disciplines, there is sufficient
common ground in the discipline justifying the approach to look at
key-management as a whole, rather than in parts. Therefore, this TC will
address the following:
Scope
A) The TC will create use-case(s) that describe how and where
the protocols it intends to create, will be used;
B) The TC will define symmetric key management protocols,
including those for:
1. Requesting a new or existing symmetric key from a server;
2. Requesting policy information from a server related to caching of keys on the
client;
3. Sending a symmetric key to a requestor, based on a request;
4. Sending policy information to a requestor, based on a request;
5. Other protocol pairs as deemed necessary.
C) To ensure cross-implementation interoperability, the TC will create a test
suite (as described under 'Deliverables' below) that will allow different
implementations of this protocol to be certified against the OASIS standard
(when ratified);
D) The TC will provide guidance on how a symmetric key-management infrastructure
may be secured using asymmetric keys, using secure and generally accepted
practices;
E) Where appropriate, and in conjunction with other standards organizations that
focus on disciplines outside the purview of OASIS, the TC will provide input on
how such enterprise key-management infrastructures may be managed, operated and
audited;
F) The TC may conduct other activities that educate users about, and promote,
securing sensitive data with appropriate cryptography, and the use of proper
key-management techniques and disciplines to ensure appropriate protection of
the infrastructure.
List of Deliverables
1. XSchema Definitions (XSD) of the request and response protocols (by August
2007) 2. A Test Suite of conformance clauses and sample transmitted keys and
content that allows for clients and servers to be tested for conformance to the
defined protocol (by December 2007)
3. Documentation that explains the communication protocol (by August 2007)
4. Documentation that provides guidelines for how an EKMI may be built,
operated, secured and audited (by December 2007)
5. Resources that promote enterprise-level key-management: white papers,
seminars, samples, and information for developer and public use. (beginning
August 2007, continuing at least through 2008)
Anticipated Audiences:
Any company or organization that has a need for managing cryptographic keys
across applications, databases, operating systems and devices, yet desires
centralized policy-driven management of all cryptographic keys in the
enterprise. Retail, health-care, government, education, finance - every industry
has a need to protect the confidentiality of sensitive data. The TC's
deliverables will provide an industry standard for protecting sensitive
information across these, and other, industries.
Security services vendors and integrators should be able to fulfill their use
cases with the TC's key management methodologies.
Members of the OASIS PKI TC should be very interested in this new TC, since the
goals of this TC potentially may fulfill some of the goals in the charter of the
PKI TC.
Language:
English
IPR Policy:
Royalty Free on Limited Terms under the OASIS IPR Policy
Additional Non-normative information regarding the start-up of the TC:
a. Identification of similar or applicable work:
The proposers are unaware of any similar work being carried on in this exact
area. However, this TC intends to leverage the products of, and seek liaison
with, a number of other existing projects that may interoperate with or provide
functionality to the EKMI TC's planned outputs, including:
OASIS Web Services Security TC
OASIS Web Services Trust TC
W3C XMLSignature and XMLEncryption protocols and working group
OASIS Digital Signature Services TC
OASIS Public Key Infrastructure TC
OASIS XACML TC (and other methods for providing granular access-control
permissions that may be consumed or enforced by symmetic key management)
b. Anticipated contributions:
StrongAuth, Inc. anticipates providing a draft proposal for the EKMI protocol,
at the inception of the TC. The current draft can be viewed at:
http://www.strongkey.org/resources/documentation/misc/skcl-sks-protocol.html
and a working implementation of this protocol is available at:
http://sourceforge.net/projects/strongkey for interested parties.
c. Proposed working title and acronym for specification:
Symmetric Key Services Markup Language (SKSML), subject to TC's approval or
change.
d. Date, time, and location of the first meeting:
First meeting will be by teleconference at:
Date: January 16, 2007
Time: 10 AM PST, 1PM EST
Call in details: to be posted to TC list
StrongAuth has agreed to host this meeting.
e. Projected meeting schedule:
Subject to TC's approval, we anticipate monthly telephone meetings for the first
year. First version of the protocol to be voted on by Summer 2007. StrongAuth is
willing to assist by arranging for the teleconferences; we anticipate using
readily available free teleconference services.
f. Names, electronic mail addresses, of supporters:
Ken Adler, ken(AT)adler.net
June Leung,June.Leung(AT)FundServ.com
John Messing, jmessing(AT)law-on-line.com
Arshad Noor, arshad.noor(AT)strongauth.com
Davi Ottenheimer, davi(AT)poetry.org
Ann Terwilliger, aterwil(AT)isa.com
g. TC Convener:
Arshad Noor, arshad.noor(AT)strongauth.com

Hi Bilge,
did you put your text in a blender before sending it?
I understood everything works fine except the miscellaneous menu item in the configuration tab of ERM?
Have you already tried to clear all browser cache, close all browsers and try it again?
Best,
Frank

GUI_DOWNLOAD is giving # for other than english content

Hi Guys,
I am using GUI_DOWNLOAD FM for downloading internal table content. When my table has content other than english language, my downloaded file has only # symbols.
I getting code page number for the language using FM NLS_GET_FRONTEND_CP and passing to GUI_DOWNLOAD. Even standard ALV download also doing the same. Please sugest some solution for this.
I have to download to text file and excel file.
Thanks,
Vinod.

Hi Sandra/Vijay,
Your inputs are really helpfull. Thank you so much for your response.
Problem is solved now by giving the code page as 4103 and marking the field write_BOM as X in GUI_DOWNLOAD FM.
You guys are are correct. I am in Unicode system and using SAP 4.7 version. Now it is working fine. But one more problem with GUI_UPLOAD.
I am using Office 2007. I have saved excel file in 2003 format. When i try to upload this file having Korian text/Russian text using the FM ALSM_EXCEL_TO_INTERNAL_TABLE last two rows are not coming properly. Tried with FM TEXT_CONVERT_XLS_TO_SAP also. Below is the code snippet.
    REFRESH: li_xlstab[].
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      EXPORTING
        filename                = po_file
        i_begin_col             = lc_1
        i_begin_row             = lc_1
        i_end_col               = lc_4
        i_end_row               = 5                         "lc_65536
      TABLES
        intern                  = li_xlstab
      EXCEPTIONS
        inconsistent_parameters = 1
        upload_ole              = 2
        OTHERS                  = 3.
My excel has always 4 columns and unknown number of rows. For testing i gave 5 rows.
Here first 4 rows are uploaded correctly. When it comes to fifth row it is still recognising as 4th row.
Results of li_xlstab is like below.
ROW COL VALUE
0001|0001|KO                                                              |
0001|0002|I                                                               |
0001|0003|001                                                             |
0001|0004|uACB0uACFC, uD3C9uAC00                                                          |
0002|0001|KO                                                              |
0002|0002|I                                                               |
0002|0003|M01                                                             |
0002|0004|uACB0uACFC, uD3C9uAC00                                                          |
0003|0001|KO                                                              |
0003|0002|I                                                               |
0003|0003|M02                                                             |
0003|0004|uACB0uACFC, uD3C9uAC00                                                          |
0004|0001|KO                                                              |
0004|0002|I                                                               |
0004|0003|M03                                                             |
0004|0004|uACB0uACFC, uD3C9uAC00##KO                                                      | "Here its going wrong
0004|0005|I                                                               |
0004|0006|M04                                                             |
0004|0007|uACB0uACFC, uD3C9uAC00##                                                        |
After 4th row 4th column it should take 5th row 1st column. But it is taking as 4th row 5th column. Also in 4th row 4th column u can see some # symbols and KO after korian text. This value KO should be the 5rh row 1st column value.
When i run the same program in office 2003 machine with the same file it is working perfectly fine.
Hope u guys got the problem.
Thanks,
Vinod.

Flat File-to-RFC question, multiple RFC calls for one file.

Hi guys,
I'm quite new to XI / PI and I have a question regarding a File-to-RFC scenario we're trying in NW PI 7.1.
We have a flat file which has two lines with two fields each, let's take this as an example :
001,001
002,002
The files needs to be converted to XML and then transferred to the RFC program which will update a table with the values above.
In the ESR I've created 3 data types (z_row1,z_record1 and z_fileinput1), 1 message type (z_file2rfc_ob_mt), 1 message mapping (z_file2rfc_mm), 2 Service Interface (z_file2rfc_ob_si and z_file2rfc_ib_ztestpi) and 1 operation mapping (z_file2rfc_om).
In the Integration Builder (ID) I've created everything required (The sender and receiver communication channels, sender and receiver agreement, receiver determination and interface mapping).
We're also using content conversion to convert the flat file to XML, this does seem to work because I see all the lines/field in the message when it gets into PI. The problem is that the RFC can only accept two fields at a time and only the first line gets updated. I see that only the first line gets sent to the RFC.
How can I make the RFC call for each and every line ?
Thanks !!

Create the RFC with table, which takes multiple lineitem as input and update the table in single call.
If you want response back then call RFC as synchrounous else in Asynchrounous mode.
By doing this in single call it will update the complete table.
Gaurav Jain
Reward Points if answer is helpful

Call for Speakers - 2006 ASUG Annual Conference

The 2006 ASUG Annual Conference will be held May 14 - 17 in Orlando.
The call for speakers has been open for a while now and will close on 11/21. If you have a topic that you would like to present at conference, I encourage you to submit your abstract before the deadline.
I encourage everyone who has given a presentation in the past, whether at Annual conference, at one of the forums or during an outreach call to consider giving a presentation at the 2006 conference. I also encourage those of you who have not had the opportunity to share with the ASUG community to also consider submitting an abstract.

I am afraid I don't know how to make this Sticky... Maybe someone can email me the answer ?? [email protected]
As far as sharing material, ASUG has a non-disclosure agreements, which prohibits me from sharing the materials to the world at large. I agree that it would be nice to share ASUG presentations with everyone here at SDN/BPX, but I am not allowed to do so.
Thanks for the pointer about stickiness.

IPTComm 2008 Call for Demos

Please find below the "Call for Demos" for the
IPTComm 2008
http://iptcomm.org
Heidelberg, Germany,
July 1-2 2008.
Please feel free to circulate this call for demos to interested colleagues, mailing lists, forums and blogs.
==============================================================
Call for Demos:
IPTComm2008 (as already IPTComm2007) features a special session for demonstrations. Topics of interest cover all aspects of Services and Security for Next Generation Networks, as outlined in the main conference call for papers. Demos will be held as closing session on July 2 at the main conference venue. All demonstration submissions should include a title, a short description of the system, a summary of its novel characteristics, the list of functions and features to be demonstrated, and state the significance of the contribution relevant to the conference themes. Submissions must be in English and must not exceed four pages. We encourage authors to include in their submissions a link to a set of screenshots and/or mockups and/or animations of the proposed demonstration where possible. Submissions will be evaluated on the basis of their innovation, practical value, relevance and presentation. Accepted submissions will be published on the Conference website. Priority will be given to submissions that have industrial relevance and have a demonstrable impact on products in the short-medium term. The demo session is seen as an opportunity for researchers to come together with developers and industry to discuss practically oriented topics. Submissions are to be sent as email attachments (PDF format) to [email protected]
Deadlines:
Submission deadline: May 15, 2008
Notification: June 1, 2008
Demo: July 2, 2008
Demo Committee
Dorgham Sisalem - Tekelec
Ali Fessi - University of Tubingen

I am afraid I don't know how to make this Sticky... Maybe someone can email me the answer ?? [email protected]
As far as sharing material, ASUG has a non-disclosure agreements, which prohibits me from sharing the materials to the world at large. I agree that it would be nice to share ASUG presentations with everyone here at SDN/BPX, but I am not allowed to do so.
Thanks for the pointer about stickiness.

Call For Papers - Session Proposals

Call for Session Proposals Open Until December 17
The time has come to begin accepting and reviewing session proposals for BrainShare 2011 in Salt Lake City. The Call for Papers (CFP) will be open from now through December 17, 2010 (5:00 PM MST). If you have a proposed topic which you believe would be of value to our attendees, please submit it by going to Novell BrainShare and clicking on the Call for Papers link.
BrainShare will have a strong emphasis on technical sessions. Preference will be given to the sessions that are more technical in nature and are focused on an intermediate to advance audience.
We are excited to review your session ideas. Year after year, our content continues to improve. We are confident that this upcoming event will be the best ever!

Reminder: Our call for papers is closing on Monday 27th July. Be sure to send your abstracts to [[email protected]]
We also have a Twitter account and will be posting updates via that. Se sure to follow: aus_ora_spatial
Ross.

VL 2000 Call for Participation

VL'2000: IEEE Symposium on Visual Languages
September 10-14, 2000
Seattle, Washington
http://www.cs.orst.edu/~burnett/vl2000/
Call for Participation
VL'2000 is the premier international conference on visual and
multimedia languages for creating/understanding software.
We hope you will plan to join us at this year's conference, which
includes keynote talks by Brad Myers and Tony DeRose, a special
session by S.-K. Chang, tutorials, satellite workshops, a social
program to provide a sampling of some of Seattle's unique attractions,
and more. Here are some of the details:
Opening keynote: Brad Myers (Carnegie-Mellon University).
Brad Myers is an extremely well known researcher in programming by
demonstration. His topic will be "Creating More Natural Programming
Languages," a description of his new line of research into
deriving the design of a programming language from the results of
human-factors experiments and principles.
Closing keynote: Tony DeRose (Pixar Animation Studios).
Tony DeRose is a senior scientist at Pixar, and was a major
contributor
to the Oscar winning short film "Geri's Game." In 1999 he received
the ACM SIGGRAPH Computer Graphics Achievement Award. His topic
will be "How Computer Graphics is Changing Hollywood," a behind-the-
scenes look at how fully digital films --- such as Pixar's "A Bug's
Life" and "Toy Story 2"--- are made, with particular emphasis on the
role that geometry plays in the revolution.
Tutorial -- Diagrammatic Reasoning and Visual Languages: How to draw
upon research findings from psychology, art, mathematics, and
human-computer interaction to design a diagrammatic visual
language or environment.
Tutorial -- Object-Oriented Software Development of Multimedia
Applications with UML: UML is becoming extremely popular. This
tutorial will introduce participants to UML diagrams, and will
preview
the currently proposed UML extensions to model multimedia
applications.
Tutorial -- Advanced Visual Modelling: Beyond UML:
An overview of UML and some of its strengths and weaknesses, and
alternative visual reasoning mechanisms that can be used instead of
or in conjunction with UML.
Tutorial -- Programming by Example Techniques: Introduction and survey
of a broad range of techniques used in programming systems that
allow the user to give examples of the desired behaviors and
contents, from which the system generalizes.
Satellite Workshop -- The Visual End User:
http://borg.cs.dal.ca/~smedley/veu/index.html
Satellite Workshop -- Visual Methods for Parallel/Distributed
Programming:
http://wwwmath.uni-muenster.de/math/u/guidow/wsvl2000/index.html
Satellite Workshop -- Multimedia Computing on the World Wide Web:
http://grail.cba.csuohio.edu/~mcwww2k/Vl2000.html
Also, S.-K. Chang will be doing a special presentation on the emerging
subarea of Multimedia Software Engineering.
Finally, our social program this year includes two receptions, an
excursion to Paradise on Mount Rainier, and a banquet. See the web
page for details.
Please join us! More information, including the advance program
and registration details, is available at:
http://www.cs.orst.edu/~burnett/vl2000/
Hotel reservation deadline for the special VL rates: August 9.
Conference registration deadline for the early rates: August 15.

Hi John,
Is I said in the mail I sent you, I'd be interested in having a go at this. We use TRAC in house and it would be nice to have a connector up and running for TPC.
I'm hoping others would be willing to join in as well.
Thanks
Femi

In downloading an application, an icon called "Speech Feedback" has popped up on my desktop. and I can't get rid of it. It will not be trashed, and I can't find the app. among my applications.

After downloading an application, an icon called "Speech Feedback" has appeared on my desktop. I do not want it and can not get rid of it. Please help.

Go to System Preferences and click the Speech icon . When the next screen opens look in the upper portion of that screen for "Speakable Items". Change the setting from "On" to "Off". Now the icon of the desktop should disappear. If not, restart your MacBook Pro.

Requesting API calls for Windows 10's virtual desktops

Please add API calls for working with Windows 10's virtual desktops, for example, a way to determine which virtual desktop a particular window is on and which virtual desktop is active.
The problem can be seen using the Snipping Tool. Open the tool and select a
New / Window Snip. As you move the mouse around, the snipping tool
highlights areas where there is no window, but there is a window in another virtual desktop.
First desktop, Snipping Tool highlights and empty area ...
Second desktop...
It's because Snipping Tool has no way to know which virtual desktop a particular window is on.
Thanks!

Thanks, been there, did that, but there's no way to know if Microsoft listened or provided a solution :-(
Hi GoVideo,
Currently, Windows 10 is still in the Technical Preview stage, Microsoft will collect all feedbacks and evaluate them guardedly.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TAAC-XI Call For Speakers

TAAC-XI - The Alternative Authorware Conference
September 28-30, 2006
Hilton Charlotte University Place, Charlotte, NC USA
Mark Henry Enterprises invites Authorware developers and
other eLearning
professionals to participate in the TAAC-XI - The Alternative
Authorware
Conference call for speakers. Mark Henry Enterprises strives
to provide
TAAC attendees with valuable, practical content that they can
really use.
If you would like to speak at TAAC-XI, please complete the
online
application form available at:
http://www.markhenryenterprises.com/taac_app.php
For more information on TAAC-XI, or to register, surf on over
to:
http://www.markhenryenterprises.com/taac.html
Thanks for your time, and here's to seeing YOU at TAAC-XI!
mark h
Mark Henry Enterprises, Inc.
375 Schad CT SW
Concord, NC 28025 USA
704.721.6685 office
704.701.4757 mobile
[email protected]
www.MARKHENRYENTERPRISES.com

We've received multiple complains about your
cross-posting-off-topic messages.
"Announcements Forums" is where this post belongs to, not
Flash technical discussion group.
Please stay on topic and don't cross post same thread to
multiple forums, it is against Adobe's posting guidelines. If you
haven't familiarize yourself with it yet, now would be the time to
finally do it.
http://www.adobe.com/support/forums/guidelines.html
Paul Keller
Flash Product Management
http://www.flash.com/
415.832.7444 (p) 415.626.0554 (f)

Disable Call Quality Feedback

Morning all, Does anyone know how to disable the call quality feedback that keeps popping up after making a call. I use skype for business purposes and have the call quality feedback box popping up all the time. Very frustrating. Can anyone assist please??? Thank you in advamce!

Dear Skype support,
I have a huge problem with your Skype call quality feedback. I use Skype to talk with my friends and play together full screen games online like CallofDuty7 BlackOps. We have a big community and we have our own discussion which we never leave, we use it to talk while we play the game together (instead of the game team speak). We do this all the time but with your new add "call quality feedback" popup window it throws me and my team mates out in Windows to ask us about the quality of the conversation. This happens everytime someone from the group decides to end call, while the caller and everyone else are still talking on the discussion. This interrupt out game and sometimes the game even crash and Skype ruin the experience with this unwanted and offensive popup. Please fix this problem at your next version of Skype or me and everybody else I know that is a Skype lover but have a problem with your harrasing way to ask people about every conversation - we will leave Skype and go on something else. I have friends, family and co-workers that use this to contact me and they all would change Skype with something else just because I cant stop this harrasment !
Best regards,
Yours truly user.

Call for Beta testers - Skype Click to Call for Ma...

Updated 20.12.2011:
We have got a good number of people signing up to be a beta testers for Skype Click to Call for Mac. We have now closed the collection of candidates and will be contacting the chosen people soon.
Thank you for showing out suchs a interest on our product.
We're in the process of developing Skype Click to Call functionality for Mac. This will enable Mac users to make calls with Skype directly from their browser. It's free to call numbers with blue buttons - you'll be given Skype Credit to call all other numbers.
We have reached a point where we would like to share Skype Click to Call with select participants to get early feedback.
As this is a closed beta, we will be asking all selected participants to sign a non-disclosure agreement with Skype.
We will also be offering active participants free Skype credit, and a memorable gift for taking part. In addition, a larger gift will be awarded to the top contributor.
To be part of the Skype Click to Call closed beta testing please fill out the following survey:
https://www.surveymonkey.com/s/KVQ9M22
We will be contacting selected participants via email over the next few days.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

How abut you perfect it for PC / Firefox first? I just updated to Firefox 9.0.1 and click to call is broken. I cannot find any reference for it in Tools.

Call for Feedback on SDN content

Similar Messages

Maybe you are looking for