Call Forward to mobile unallocated/unassigned

Hey,
I am having issue with a customer. I have tried all possiblities. Manimpulating translation rules and tried the below link
http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a00800b48cb.shtml
but nothing worked.
Please find below the debug
Oct 18 09:20:46.976: ISDN BR0/0/1 Q931: RX <- RELEASE pd = 8 callref = 0x62
Oct 18 09:20:46.980: ISDN BR0/0/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xE2
Oct 18 09:20:47.244: ISDN BR0/0/1 Q931: TX -> RELEASE pd = 8 callref = 0x69
Oct 18 09:20:47.344: ISDN BR0/0/1 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xE9
Oct 18 09:20:49.940: ISDN BR0/0/1 Q931: RX <- SETUP pd = 8 callref = 0x63
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x82
Preferred, B2
Calling Party Number i = 0x1183, '447720742215'
Plan:ISDN, Type:International
Called Party Number i = 0xA1, '263793780'
Plan:ISDN, Type:National
Sending Complete
Oct 18 09:20:49.944: //-1/69BE0066807A/CCAPI/cc_api_call_setup_ind_common:
   Interface=0x2228E2C0, Call Info(
   Calling Number=447720742215,(Calling Name=)(TON=International, NPI=ISDN, Screening=Network, Presentation=Allowed),
   Called Number=263793780(TON=National, NPI=ISDN),
   Calling Translated=FALSE, Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE,
   Incoming Dial-peer=1, Progress Indication=NULL(0), Calling IE Present=TRUE,
   Source Trkgrp Route Label=bri, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=-1
Oct 18 09:20:49.948: ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x1 0x1, Calling num 00447720742215
Oct 18 09:20:49.948: ISDN BR0/0/0 Q931: Sending SETUP callref = 0x006A callID = 0x806C switch = basic-net3 interface = User
Oct 18 09:20:49.948: ISDN BR0/0/1 Q931: TX -> CALL_PROC pd = 8 callref = 0xE3
Channel ID i = 0x8A
Exclusive, B2
Oct 18 09:20:49.952: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8 callref = 0x6A
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x1183, '00447720742215'
Plan:ISDN, Type:International
Called Party Number i = 0xA1, '3409870403'
Plan:ISDN, Type:National
Sending Complete
Oct 18 09:20:50.232: ISDN BR0/0/0 Q931: RX <- CALL_PROC pd = 8 callref = 0xEA
Channel ID i = 0x89
Exclusive, B1
Oct 18 09:20:50.332: ISDN BR0/0/0 Q931: RX <- DISCONNECT pd = 8 callref = 0xEA
Cause i = 0x8281 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now available
Oct 18 09:20:50.336: ISDN BR0/0/1 Q931: TX -> DISCONNECT pd = 8 callref = 0xE3
Cause i = 0x8081 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now available
Oct 18 09:20:50.456: ISDN BR0/0/1 Q931: RX <- RELEASE pd = 8 callref = 0x63
Oct 18 09:20:50.456: ISDN BR0/0/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xE3
Oct 18 09:20:50.460: ISDN BR0/0/0 Q931: TX -> RELEASE pd = 8 callref = 0x6A
Oct 18 09:20:50.568: ISDN BR0/0/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xEA
-ITALY#u all
All possible debugging has been turned off
-ITALY#term no mon
-ITALY#e   config
Configuring from terminal, memory, or network [terminal]?
Could some one please shine some light on this issue
Please rate the post
Shibly Ibrahim

Hi,
Call is being release from remote end.
Ask the remote end regarding there expectaiton for this called number and calling number digit and it's plan and type.
Try calling that mobile number directly from your side and check if its working?
Regards,
Nishant Savalia

Similar Messages

Automatic call forwarding (time based) to mobile number in CUCM 9.1.1

Hi
I need to configure time based automatic call forwarding to mobile number. Can we do this from CUCM 9.1.1 ?
Example : Ex 2000 need to forward to 01111188888 in every friday after 9.00pm
Regds
$

There is one way you can still achieve it by using the Mobile connect (SNR).
In the Remote Destination you have the option to ring your mobile based on your requirement.
Please see the attached screenshot for the same.
So user need to enable the Mobile connect on friday all calls will go to the Mobile phone # (Remote destination).
Also delay before ringing should be 0 ms.
Please refer to the Mobile connect configuration guide for the same.
Kind Regards,
Raaj.

Call forward to external number(mobile)

Dears please help me on this
voice translation-rule 1
rule 1 /2837599/ /599/
rule 6 /2837596/ /596/
rule 7 /.*2837555/ /123/
2837... are my SIP DID nos
123 is my AA extn
596 and 599 is an ip phone exten
i need to transfer directly to an external no (mobile no) when i call 2837596 from outside without extension
what is the config to be done

dears , i tried it but call not forwarding please need our help
voice translation-rule 1
rule 13 /.*2837499/ /499/
ephone-dn 499 dual-line
number 499
label website
description 499
call-forward all 90504495705
corlist incoming user-international
ephone 37
device-security-mode none
video
mac-address 001E.F727.F567
ephone-template 16
username "700" password 700
type 7911
button 1:499
pin 1700

Online Number is not forwarding calls to my mobile

Hi,
I have gone premium and selected unlimited landline for Australia. I have then bought an Online Australian Number. After setting up call forward to my Indian Mobile Number the calls are not getting forwarded, although the calls appear on Skype Client when I'm online. I have tried setting privacy and all that stuff, but it yet does not work. In the Call Forward tab following message is displayed: "All calls forwarded to phones covered by your subscription are included at no extra cost. Other destinations will be charged at our low per minute rates."
Am I missing something? Do I still need to buy credit? Thanks so much,
Kind Regards
Prabh

Hello,
Skype Number enables you to receive calls on your Skype account and the caller will be charged local rates.
To receive calls to your Skype Number, you should be online on your Skype application, or you can enable call forwarding and voice messaging. And also, please make sure that you are signed in to only one device.
Please make sure that you have set up your Privacy Settings to "Received calls from anyone."
Sign in to Skype.
Tap the menu icon .
Select Settings.
Go to Receive calls from option.
If one of my replies has addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others experiencing the same issue.

Forwarding my unanswered calls to my mobile showing the E1 no on my mobile while i want to showing the caller mobile ID.

hi guys,
if i have a coming call from mobile to my extension and i forwarding my unanswered calls to my mobile showing the E1 no on my mobile while i want to showing the caller mobile ID.
is the ""gateway Calling Party Selection* Originator"" configuration on cucm will solve it or no

Hi,
Setting the Calling Party Selection to Originator will send the Original Calling party number to your provider. If your provider accepts any calling number, it is well and good.
you may also need to enable the other setting 'Redirecting Number Delivery Outbound' and Redirecting Party Transformation CSS to ensure the IP phone's number is sent to provider as a Redirecting number along with the original calling number and final called number.
Please collect 'debug isdn q931' for a test call to verify how these numbers are sent to provider.
Thanks
Suresh
Please rate all the helpful posts

Is call forwarding to my mobile included in my Eur...

I signed up for a Europe Unlimited subscription with an online number under the premise that call forwarding to my mobile is free.... I am still unsure having read various posts whether or not this the case?
Could you please clarify whether or not my subscription covers this?
Thanks,
Michael.

Hello,
Only CF to landlines is free with your Plan.
For free CF to European cellphones you need to subscribe to a European cellphone Plan.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Skype number forwarding to mobile costing to much each receiving call??

Hi, I brought a skype number, I only want to use it for receiving incoming calls.. I do not wish to call anyone on my skype number.. But I've been having to buy credit a few times now because each time someone calls my skype number & i have it so it forwards to my mobile phone it's costing me to much ? Is there a cheaper way I can have my Skype number & receive incoming calls forwarded to my mobile phone? When I answer not on Skype, iPhone mobile phone number I pick the call from?? I subscribed to something I thought was it but I was rong because I still have no credit to receive calls to my mobile phone?
Can someone help me please ?

Hey, Mell.johns
Welcome to the Skype Community!
To better understand your inquiries, let me re-word your questions and then attempt to answer it.
Q: Is there a cheaper way to receive incoming calls from my Skype Number on my mobile phone?
A: Sure, you can answer calls from your iPhone for no additional charge by using Skype for iPhone! Sign in and your calls will ring there at the same time your computers signed onto Skype would!
Q: When I'm not on Skype, can I pick the call up from my iPhone mobile number?
A: Yes, but that requires Skype Credit or a calling subscription for calling out. Again, picking up from the iPhone app won't cost you more.
If these questions & answers do not satisfy you, please attempt to re-explain your questions in further detail so that we could try this again!
Community-based Support
Who's better than those who use the software the most to help you out?
Come back to the community and let us know what's on your mind about Skype!

CUPC 8.6 call forward to voicemail

Hi!
I am using Cisco Personal Communicator (CUPC) 8.6 and also CUCM 8.6. I have CUPC in Deskphone mode, connected to a 6945 IP Phone. I also have Unity Connection where my voicemail box is hosted. When I want to setup call forward to voicemail button in cupc option, it is not working. CUPC will not handle the options I setup seconds before. If I manually put in a call forward to extension number of voice mail pilot call forwarding is working. also call forwarding to my mobile is working.
I checked End User settings, IP Phone is associated to my user, also CTI controll is enabled on device and line settings. user privileges are correct. I tried it on jabber client where it works fine. I also restarted CTI and Callmanager Services on the Servers.
Does anyone has an Idea if this is a general bug in CUPC or does anyone can tell me what the problem might be?
Thanks!
René

Hi,
If at least one of these phones is set to CF to VM then it will, if not, then no.
If none of your phones is set to CF to VM CUCM will not send them to VM, that is expected, if you need to ring, phone A, and if it is not answered to go to phone B, C... and so on, and send the caller to VM after you have reached all of these then use a hunt group, (the pilot can be set to CF to VM if nobody answers), if you need to ring all phones at the same time so someone can pick this up, use a hunt group with a broadcast logic.
If this is for a single user, check 'single number reach' (SNR) or mobility on CUCM.
Bottom line, there is no way to send a caller to VM if none of the phones is set to CF to VM.
HTH
Chris.

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Call Forward to Voicemail

I am having an issue when forwarding to another extension. I know this is probably a simple answer but I'm stumped.
I am going into the DN Configuration page for extension A. Under Call Forward, for the destination I am entering extension B for:
Forward Busy Internal
Forward Busy External
Forward No Answer Internal
Forward No Answer External
Forward No Coverage Internal
Forward No Coverage External
Forward on CTI Failure
Forward Unregistered Internal
Forward Unregistered External
And I am unchecking the Voicemail check boxes.
Then I am doing the same for extension B.
But when I have it setup this way, each extension will bounce to the other and will not go to voicemail. It will forward back and forth.
Any suggestions?

Hi,
If at least one of these phones is set to CF to VM then it will, if not, then no.
If none of your phones is set to CF to VM CUCM will not send them to VM, that is expected, if you need to ring, phone A, and if it is not answered to go to phone B, C... and so on, and send the caller to VM after you have reached all of these then use a hunt group, (the pilot can be set to CF to VM if nobody answers), if you need to ring all phones at the same time so someone can pick this up, use a hunt group with a broadcast logic.
If this is for a single user, check 'single number reach' (SNR) or mobility on CUCM.
Bottom line, there is no way to send a caller to VM if none of the phones is set to CF to VM.
HTH
Chris.

Call Forwarding Breaks with iOS 8.3 Update on iPhone 6 and iPhone 6 Plus with AT&T

Ever since the iOS 8.3 Update, call forwarding is no longer working on my iPhone 6 Plus. I have spent dozens of hours troubleshooting with both AT&T Advanced Business Technical Support as well as many hours with top technicians from Apple at my local Genius Bars.
This is a critical bug for me as I used to use the call forwarding option multiple times a day, EVERY DAY, because when I am in certain business locations my mobile phone gets no reception and calls go right to voice mail. I need to have them forwarded to the land line I'm located at.
APPLE, PLEASE HELP!!!
I've done extensive testing, and this seems definitely to be related to Apple iOS 8.3, and it seems to be specific to the iPhone 6 and iPhone 6 Plus ONLY.
To illustrate the EXACT problem:
A: Settings -> Phone -> Call Forwarding
B. Call Forwarding - Turn on
C. Enter Number and return to previous screen by touching the blue "Call Forwarding" to return to previous screen.
D. Call forwarding button is "green" for a split second, then returns to previous OFF state and no forwarding number is displayed. DOES NOT WORK.
NOT AN AT&T PROBLEM. IF SOMEONE IS EXPERIENCING THIS WITH OTHER CARRIERS PLEASE COMMENT HERE.
Further validation this is isolated to iOS 8.3 on the iPhone 6 and 6 Plus ONLY and not the sim card from AT&T...
Here are the latest steps I did with my AT&T sim card and my wife AT&T sim card (she has an iPhone 5s):
1. Removed my sim and put it in the 5s. The phone said that a "carrier update" was required and I selected "NO" to that prompt. Call forwarding functionality worked as expected on the 5s running iOS 8.3
2. I removed the sim from the 5s and re-inserted it. This time I selected "YES" to do the carrier update to eliminate that as a variable, and the call forwarding functionality still worked as expected.
3. I then placed my wifes sim in my 6 Plus. Call forwarding functionality does NOT work on the 6 Plus (was not prompted for carrier update). Also, keep in mind this is my second phone (Apple provided me with a new iPhone 6 Plus when they couldn't resolve the problem at the Genius Bar after hours of troubleshooting).
Note: I did one additional test which as interesting: I put my sim in the 5s and turned call forwarding "on". Then, I put the sim back into my 6 Plus. The calls were still being forwarded to the number I put in while it was in the 5s, but the call forwarding interface in the 6 Plus showed that it was NOT forwarding calls. I could not turn OFF the call forwarding from the 6 Plus and had to put the sim back into the 5s in order to turn off the call forwarding.
If anyone has an update on this, or any other suggestions please advise! This is a critical issue for me as when I travel and when I am in poor areas of reception I need to forward calls. This is a featured I was using multiple times a day, EVERY DAY.
APPLE????????? HELP!!!!!!

Yes, I am dealing with this right now on at&t with a 6 plus. I've been down the same road as you. I got it to work with a windows phone yesterday but not my 6 plus when I switched back to the iPhone. My wifes 6 works fine. I believe it is an at&t issue and not an 8.3 issue. After dealing through several levels of support at at&t, they are telling me it has to do with their transition to hd voice. Some people are having this issue because they are updating their system and some peoples phone profile, on phones that have hd voice capabilities, are not getting added to their line and call forwarding will not work without it. I have a trouble ticket open to their engineering dept and they promise it will work for me on or before the 24th of april. Engineering has to build my phones profile so call forwarding will work with my iPhone.
This is frustrating because like you, I need to forward my calls because I have no signal in my office and need to forward to another phone so I can get my calls. If at&t would quit dragging their feet and enable wifi calling, this wouldn't be an issue for me. I would suggest you put more pressure on at&t and escalate this until it gets resolved. Or put your sim in a phone that does not have hd voice capability and see if it works then.
Good luck. I'm keeping my fingers crossed this will be fixed for me on or before the 24th. We'll see.
EDIT: I see you did put it in another phone and it worked. That backs up that the issue is at&t and their hd voice upgrades. They had no explanation as to why some work and some don't, but have them make sure a profile for your phone is on the line. If not, they'll need to build one for the phone so that it''l work. At least that's the story for now. Like I said, I'll know more in a day or two.

Call Forwarding Number on 3G Not Retained as it was on Original iPhone

On the original iPhone I could turn call forwarding on and off and the number I had set to have calls forwarded to was retained when I turned forwarding back on. With the 3G the number to be forwarded to needs to re-entered each time I turn call forwarding back on.
I called Apple support and also spoke to AT&T support but they were not able to provide any useful information as to why this is or if the feature is not available any longer on the 3G.
Does anyone have any info on this and/or know of a way to have the forward to number "stick"?

I have a new iPhone 3G and I have the exact same question. I used to have a Palm 750 (Mobile 6), and it had that feature, but on my new 3G, I have to reenter the call forward number every time, unless I am missing sometime. Seems ridiculous. It should maintain a list of at least 3-5 recently call forwarded numbers, as most persons would only have a select few numbers that they would ever call forward. Also, my Palm 750 had a special icon on the face page showing that I had the call forwarding feature turned on. That was a nice reminder, if I left that building and forgot to un-forward my calls.

Problem with call forwarding and "call divert"

I have been receiving calls lately and a dialogue box pops up and says "fowarded call" with a button that says "dismiss" - I'm not sure why or how to disable this. in my settings I have call forwarding turned off. Also when I make calls I sometimes see messages saying something about call forwarding active or active diverts. Again I have call forwarding turned off and I see no settings for divert. How can I fix this?
Thanks.

i am having a similar problem. I have a Pearl 8100 with T-Mobile. I've had it for almost two years (since Jan. '07). About four weeks ago, this problem started. I have a landline office phone through AT&T, and when I leave the office, I forward this land line to my Pearl. When someone calls my office after hours, on nights and weekends, the problem is that instead of the person's name and phone number showing up on my caller ID, my Pearl shows that I am calling myself from my own cell phone! I don't get "Private Number" like you get, the caller ID shows that I am calling myself!
I've spent six or seven hours with T-Mobile tech support, with five different tech people over a period of several days and several phone calls, and they can't figure it out; their final and "best" answer is that it's a blackberry problem, that the issue has been addressed and identified as a "known issue" and a "trouble ticket" has been created. I contacted RIM and they directed me to their archived troubleshooting and to this forum, so I still don't have an answer. And T-M had no answer when I told them that this feature worked just fine from Jan. '07 through Aug. '08. T-Mobile offered to put me into a different device, the T-Mobile wing, which by fair assessment, looks like a piece of junk, and it's window's mobile, which is even worse. I rejected this option.
I'm hoping someone can solve this. One friend of mine thought that it's a network issue, any issue with caller ID would be with the network, not the phone or its software...this makes some sense to me...and one of the techs at TM thought that this could be the issue as well. As T-M upgrades its networks to 3G, these bugs are popping out. who knows, I'm sticking with this Pearl and 8100 for a little while longer, b/c I am waiting to see if an answer shows up somewhere on one of the forums, but I hate not knowing who's calling before I answer the phone!

Caller ID no longer shown on calls forwarded from ...

I setup my skype number to forward all calls to my mobile phone and I used to have the caller ID shown correctly for calls incoming to my skype number on my mobile. However, it is suddenly not working in past one week. Is there any setup I need to do to correct it?

I have had exactly the same carry on as you as well as my daughter being in Egypt and missing her calls! I asked about this last YEAR but never got a single solution for it. I also am inundated by cold callers at least 10 times a day + all of their calls just show 'call' which is all I see when my calls are forwarded from Skype. I am cancelling it now and think it should be taken off Skype completely, it is clearly a problem for the majority of users yet has never been addressed or even rectified due to the odd few who state they have no problems with it. It's ridiculous that a company making billions can't listen to the people making the money for them & fix a problem that would probably take 5mins to correct! Surely enough users complaining about the same problem should have been sorted by now? Shameful

What's the meaning of Forward No Coverage at Call Forward and Call Pickup Settings

hi All,
Please, I have a CUCM and I need to understand the meaning of the follow configuratio at the line:
Forward No Coverage Internal
Forward No Coverage External
Forward on CTI Failure
Could you explain to me by a easy way?????
How can I do a test?
Thanks a lot

Actually the no coverage is not only for DNs in line groups. The way no coverage works is that you set a CF setting on any phone (doesn't need to be in a line group), and you send them to a hunt pilot. ie CFB to a hunt pilot
In the hunt pilot for the Forward Hunt No Answer/Forward Hunt Busy you choose:
Use Personal Preferences—Use this check box to enable the Call Forward No Coverage (CFNC) settings for the original called number that forwarded the call to this hunt pilot.
So, after it rings your phone, rings thru all the hunt pilot/hunt list/line group members, it goes back to the phone that routed the call to that hunt pilot, looks at the no coverage setting and does as instructed. Send it to VM, another hunt pilot, your mobile, etc.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Call Forward to mobile unallocated/unassigned

Similar Messages

Maybe you are looking for