Call forwarding - after the change of the phone nu...

Hello!
I have an subscription, which inludes Call forwarding . After changing the phone number, my Skype credit began to decrease. What is the reason and which solution could be found in this case? Looking for an answer.

Hua Min wrote:
D:\oraclexe\app\oracle\product\10.2.0\server\BIN>LSnrctl status
連線至 (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:沒有監聽器
TNS-12560: TNS:協定介面程式錯誤
TNS-00511: 沒有監聽器
32-bit Windows Error: 2: No such file or directory
連線至 (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.104)(PORT=1521)))
TNS-12541: TNS:沒有監聽器
TNS-12560: TNS:協定介面程式錯誤
TNS-00511: 沒有監聽器
32-bit Windows Error: 61: Unknown error
D:\oraclexe\app\oracle\product\10.2.0\server\BIN>LSnrctl service
連線至 (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:沒有監聽器
TNS-12560: TNS:協定介面程式錯誤
TNS-00511: 沒有監聽器
32-bit Windows Error: 2: No such file or directory
連線至 (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.104)(PORT=1521)))
TNS-12541: TNS:沒有監聽器
TNS-12560: TNS:協定介面程式錯誤
TNS-00511: 沒有監聽器
32-bit Windows Error: 61: Unknown error
Thanks & Best Regards,
HuaMinYou have OS related errors; external to Oracle.
Are both OS Services for Database & Listener running?

Similar Messages

Good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart

good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart

See this veeeeeeeeeery long thread.
https://discussions.apple.com/thread/3404857
It's an issue with hundreds of phones. Some claim it's software related, some hardware, some say it's a mixture of both.
Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
So far the only solution that seems permanent has been to replace the phone. But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing.

I can not use my bluetooth on my 4S to use SIRI when my phone is locked.I have a JABRA Wave. Is SIRI useable after the phone has automatically locked?

I recently purchased an iPhone 4S. I also recently purchased a Jabra Wave bluetooth. When my phone is unlocked I can use Bluetooth handsfree to invoke SIRI. After the phone automatically locks I can not use SIRI. I can still receive calls. Is this an issue with Jabra Wave, IOS?

Answered in your other thread on this Topic
https://discussions.apple.com/message/24487730#24487730

Is there a phone number where I can call someone? The phone number in your web page is missing a num

Is there a phone number where I can call someone? The phone number in your web page is missing a number. it is listed as 1-800-426-570? One number missing. I just paid with my credit card online for photoshop and it is not allowing me to log in in order to download.

If I click on the adobe.ly link Rajshree gave you, above, there is a phone number at the bottom of the Customer Support contact webpage.
This is the number I see when logged in with an AdobeID associated with the US is:
800-833-6687
It is possible that you are somewhere else in the world and the webpage is smart enough to give a different phone number, so the number I see may or may not be applicable to where you are.
It also may be advisable to use the Chat instead of the phone, because it may be easier to understand what someone is typing than trying to interpret their English through whatever accent they are speaking with.

"spam" caller list so the phone does not even ring?

Is there a way to add a nuisance call to a "spam" caller list so the phone does not even ring?

File a complaint at donotcall.gov. You're never going to be able to catch them all. Most of them now use voip systems that can spoof numbers. They almost never call from the same number twice and within 24 hours of beginning to use it, the number is dead. Completely shut down.
What the industry really needs is a vetted real-time black-list of smap callers that you could subscribe to, similar to those used to filter spam e-mailers. Probably won't happen in this decade, though.

TA38607 how do i deactivate call waiting while i could not find the call waiting in the Phone folder

how do i deactivate call waiting while i could not find the call waiting in the Phone folder

If you have a CDMA phone, there is no way to deactivate Call Waiting from the phone. You'll need to contact your carrier.

I can't get my phone to ring. When a call comes in the phone vibrates. I have checked my settings

I can't get my phone to ring. When a call comes in the phone vibrates. I have checked my [email protected]

There should be a little switch on the top left side of your phone. It's the silent mode. If it's switched on, you will see an orange bar there. Switch it off, and you'll get your sound back.

What happens if it takes some hours after the phone alerts that it has been charged?

What happens if it takes some hours after the phone alerts that it has been charged?
I mean is it harmful for the phone to be pluged into the outlet for some hours after the battery percentage has been 100%?

roohollahtaherifard wrote:
I mean is it harmful for the phone to be pluged into the outlet for some hours after the battery percentage has been 100%?
No. You cannot Over-charge.
About iPhone Batteries = http://www.apple.com/batteries/iphone.html

Upgaded ios on 3gs to ios 6.0. Manual connect to wifi and works. Will not reconnect after the phone shuts off unless I do it manually. The old ios would. Suggestions??

Upgraded ios on iphone 3GS to ios 6.0. I manually connected to the wifi and it works. After the phone shuts off, it will not connect back to wifi when it turns on unless I reconnect manually again. I have the "Ask to join Networks" button turned on. Frustrating and could get expensive if I forget and start using ATT data. Suggestions??

Settings, Reset, Reset Network Settings. Then attempt to connect again. Passwords will be deleted when you do this, so it will ask for the password again. After that, see if it will connect.

How the put an extension after the phone number in Contatcs

I try to put an extension number after the phone number in some business contatc, but I don't know how.
Thanks in advance.

Glad to help. Thanks for the !
Forgot to add - you can insert multiple pauses if you need to - they are 2 seconds each.

Possible Bug !? Incoming FXO Call Reboots all the phones !

System is simple enough.
3xSPA303G phones. 2xFXO trunk. 1xSIP trunk.
Nothing else !
Incoming call from FXO line goes to extension 101, she starts to talk than after a few seconds, the voice goes away. When she hangs up, all the phones reboot. Reason of reboot shows "SIP triggered" on all phones. This happens all the time and everytime there is a call from FXO.
Also when there is an incoming call from the FXO line and is forwarded to again ext 101, but Extention 100 <grpick> the call, there is no problem !
Logs are attached.
This problem is killing us. Someone please help !
Anyone ?
Cisco ?

Hi Dogus,
Could you please contact the Small Business Support Center at the phone number listed (Please pick the appropriate phone number in your region) in the link attached? One of our engineers should be able to assist you with this issue.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Best regards,
Wendy Yang

Call register is showing calls placed while the phone was in a locked drawer

I have a BB curve 8520 which has been locked in a drawer for a few weeks. During that time 3 calls have appeared in the call register, one to a UK number and 2 to US numbers. None of these calls have registered on the phone bill and vodafone are as mystified as I am.
The user is under investigation so it's important that we know how this has happened, the dialled numbers are also part of the investigation.
Can any budding Shelock's help?

I'm going to give up on Apple if they don't change this soon. It worked before, answered like a regular phone call (slide to answer). But since IOS7 i really dont like my Iphone anymore. Looking around for alternatives.

Droid Incredible charging more after the phone is off?

Hi I have read a lot threads regarding battery life and issues but I decided to post here since Verizon responds to these posts. Whenever I charge my phone I unplug it after the light turns green and its fully charged, after reading one of the forums I tried charging till the light turned green then I turned off the phone and to my surprise the light changed from green to orange and the phone continued on charging for another 30 minutes until it turned green. Is there a problem with the battery or the phone software recognizing fully charge too early?
I would appreciate any advice

Hi I have actually noticed a difference because before after less than an hour the battery would read close to 90% but now its taking much longer, the reason for my post is that if the light is green when the phone is on and it says fully charged why can one charge for an extra 30 min when the phone is off? does this mean that the battery is not fully charged when the phone is on?
( P.S I am getting all day worth of work from the battery and wouldnt change this phone for anything

Orientation problem after the phone is being locked

I have an issue with a game I've been making for Android in Flash. The app orients itself correctly (staying in landscape) up until I lock the phone I'm testing with and then unlock it. When the phone unlocks, the app will then be in portrait mode (it should always be in landscape).
In the descriptor xml file I have set fullscreen to true, aspect ratio to landscape and auto orient to false, but this doesn't seem to affect the app when being locked and unlocked (it works perfectly in any other scenario). It will become portrait again and not move back to landscape when unlocked (so auto orient being false definitely isn't being meddled with).
This issue only triggers when you're running the game and lock the phone and unlock. If for example you were to press the home button so the app is no longer in focus, then lock and unlock and get back into the paused game it will still be in landscape.
I've never had this problem on devices with android 2.3, but after the update to the ICS, I can't find the way to fix it.
Any workarounds?

Sounds like the lock screen is changing your supposedly locked orientation and not setting it back.
With the games I work on we've always left auto-orient on so I've not played with locking the orientation.
You might try setting the orientation when you get your ACTIVATE event like so:
stage.setOrientation(StageOrientation.DEFAULT);
The problem I've found is that devices don't all standardize to default = portrait.
So first, when your app starts in landscape mode, read out the stage.orientation string and save it.
Next you might need to listen for the orientation change event and then try to find a way to force the orientation back.
Something like:
stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGE, onOrientationChange);
public function onOrientationChange(event:StageOrientationEvent): void {
     isPortraitView = (stage.fullScreenWidth < stage.fullScreenHeight);
     if (isPortraitView) {
          stage.SetOrientation(mySavedOriginalOrientationState);
I hope this helps. Good luck.

Need to call FM after the updation of the table

Hi Experts,
In the user exit 'Exit_sapllmde_006' of l_idoc_input_wmmbxy am using function module WFMC_MESSAGE_SINGLE for triggering orders05 idoc. The function module l_idoc_input_wmmbxy updates the table EKBE. But this update takes place only after the complete execution of the function module l_idoc_input_wmmbxy . In the user exit of orders 'Exit_sapleinm_002' am fetching value from ekbe table and populating. But since this table is getting updated later only this segments filled by fetching value from ekbe table are empty.
I tried using commit work and wait. But it didnt work. Tried copying WFMC_MESSAGE_SINGLE to Zfunction module and calling that in update task but this is also not working.
Is there any way to make the table get updated before calling the function module for triggering orders.
Regards
Sridevi S

Hi Sridevi...
I checked the flow of the program...the flow is like this
L_IDOC_INPUT_WMMBXY->PERFORM WMMBID01_VERARBEITEN USING IDOC_NUMMER->MB_CREATE_GOODS_MOVEMENT->Exit_SAPLLMDE_006
I guess the EKBE update is happening in the function module MB_CREATE_GOODS_MOVEMENT(Correct me if am wrong)..if that is the case then you cannot put an explicit commit in the user exit cause then you would loose the whole concept of SAP LUW...
My suggestion would be to use a perform routine on commit..
PERFORM WFMC_MESSAGE_SINGLE ON COMMIT and within this you can call the funtion module WFMC_MESSAGE_SINGLE...My guess is since the MB_CREATE_GOODS_MOVEMENT would commit first your ORDERS IDoc exit should be able to read the data from EKBE...
Furthermore, your update task funda might not work here becuase all the MB update function modules are normal function modules and the moment you called WFMC_MESSAGE_SINGLE in update task, a nes update session would be created..you would not have a control on when this update session is executed and hence you may or may not find the data in EKBE...
Hope this helps.....
Regards,
Sitakant...
Edited by: Sitakant Tripathy on Sep 14, 2010 11:15 AM

Call forwarding - after the change of the phone nu...

Similar Messages

Maybe you are looking for