Call from africa to the US.

i live in houston Tx. im planning on going to africa, rwanda this summer. can i buy credit or subscriptions to call back to Houston at the same rate?

Hi,
Yes.
I think, the best solution for you is to purchase a Skype subscription such as "Unlimited World" or "US and Canada".
You can find all options here: http://www.skype.com/intl/en/prices/pay-monthly/
I hope it helps!
If my answer helped to fix your issue, mark it as a Solution to help others.
Thank You!
Please send private messages only upon request.

Similar Messages

An incoming call from VoIP. The SPA122 generate Dial Tone after the far end hung up rather busy tone.

Hi All!
I have a problem with the SPA122 telephony adapter, uncorrectly process the subscriber signaling at the end of the call.
1) Outbound call from FXS port SPA122 . When a remote caller hangs up first , the subscriber SPA122 Reorder Tone played with a delay specified in the Reorder Delay. This circuit is working properly.
2 ) Incoming call from VoIP to the SPA122. When a remote caller hangs up first , subscriber on the FXS port of the SPA122 hears silence ~ 3-4 seconds , then SPA122 plays Dial Tone, as if he had just picked up the phone and he 's going to call . No signal lights out (Busy Tone or Reorder Tone) will not play .
Config is attached.
Model: SPA122, LAN, 2 FXS
Hardware Version: 1.0.0 Boot Version: 1.0.1 (Oct 6 2011 - 20:04:00)
Firmware Version: 1.3.2-XU (014) Jul 2 2013
Recovery Firmware: 1.0.2 (001)
WAN MAC Address: 6C:20:56:55:3A:B6
Host Name: SPA122
Domain Name: (none)
Serial Number: CCQ16450LG3
However, other VoIP terminals registered to Huawei, including older versions of the Linksys SPA2102 work in these scenarios correctly.
Where to kick it?

[2] is misconfiguration on your's side. You have CPC turned on, but no CPC capable device. Set CPC Duration to zero to turn off CPC.
By the way, wrong forum for your question. You should consider to move it to space.

Why cant i make a FaceTime call from iMessage on the iPad

why cant i make a FaceTime call from iMessage on the iPad

Because you make a FaceTime call from FaceTime on the iPad.
On a Mac, you can start and iChat conversation from the Messages app and maybe that is what you are talking about. iChat can still be used in Mountain Lion in order to have a face to face conversation with other Mac users that are not running ML and therefore do not have FaceTime.

Calls from Brazil to the US

I see how I can call from US to Brazil. But I want a subscription for calling from Brazil to the US. What do I do?

annescott-markl wrote:
I see how I can call from US to Brazil. But I want a subscription for calling from Brazil to the US. What do I do?
If you want a subscription, you want the Unlimited USA & Canada. You can call landlines and mobile phones in the USA and Canada for US$ 2.99/month. Otherwise, you can go without a subscription and pay per call. Rates for calls to the USA are 2.3 US cents/minute plus the connect fee, or 6 cents/minute plus the connect fee for Alaska.
Unlike calling to many other countries including Brazil with Skype, there is no price difference between calling a landline and calling a mobile phone in the States.
Click on the Subscriptions link at the bottom of this page, and put in USA for the desired country to see the subscription. Hope this helps...
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Calling from Mexico to the US while on vacation.

Can you call from Mexico (San Jose del Cabo) to the US on the Canada/ Mexico plan without any extra charges? The wording on the plan description states calling "to" Canada or Mexico, not "from". Thought it was worth double checking. Maybe the global plan would be a better option.

There is an unlimited North America plan. The calls to Mexican landlines only are to Mexico city, Guadalahara, and Monterey If you are not calling those cities are calling cell phones you will need skype credit.
If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
Thank You!

How to display the output of a reports called from forms in the same window

Hi all.
I have installed Forms / Reports 11g Rel2 developer only installation on my windows 7 box.
I can successfully call a reports from forms using RUN_REPORT_OBJECT and WEB_SHOW.document, but the report is opened in a new window.
I'd like to open it in the same widow, in a new tab, similar to ctrl-t and make a call.
How is that possible?.
I'm using Chrome 25.0. Could this be done through browser settings?.
Thanks in advance ...!
Edited by: myluism on 14-mar-2013 6:09

Don't know for Chrome, so Google for it.
One more thing, though. what is the 2nd parameter in web.show_document? Is it '_blank'? If not, try that.

How Do You Debug Oracle Report Calls From Forms On The App Server?

I am working on a system which uses oracle forms and reports 10g.
In our system we call, we are calling oracle reports from oracle forms. How do we debug the form code when the form and report both are running on the application server in production.
To my knowledge, this can not be done when the form is running locally since there is only OC4J forms services locally.
I understand one views error messages through the jinitiator console but how does one turn on this facility? How do you determine what line the error occurred?
I am looking for step by step instructions as answer to this issue.
Please be specific. Please write in good English.

Good afternoon,
If you have the developer suite installed on your PC, run the report from your form and then follow this tree from the start button on your PC:
Developer Suite Home =>
Reports Developer =>
Oracle Application Server Report Services =>
Reports Queue Manager
Select View => Past Jobs and then find your report in the list, double-click the report entry and you'll see the error message that was generated by the Report Server when you tried to run the report.
Good luck,
Don.

Calls from Kuwait to the United States

I would like to call the United States from Kuwait and was wondering if there is a unlimited option. And if so, how much does it cost?

Samanne19 wrote:
I would like to call the United States from Kuwait and was wondering if there is a unlimited option. And if so, how much does it cost?
Skype offers the Unlimited USA (or, in some regions, Unlimited USA & Canada) that covers unlimited (subject to Skype's fair-use policy for subscriptions) calling to landline and mobile phones in the USA (or, if you have the two-country subscription, Canada is also included), for US$ 2.99/month. There are other subscriptions that cover the USA and other countries, and you can see more at the "Subscriptions" link at the bottom of this web page.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Can I forward calls from iphone without the phone present?

I forgot my work phone at home and wanted to know if I can forward the calls without having the phone with me.

Some carriers permit call forwarding using any computer when you login to your account, so contact your carrier.

How does ip4s identify and address the caller from Contacts on the outgoing message to a caller?

A friend has the iP4s and has this featured activated.

Here ya go:
http://itunes.apple.com/us/app/youmail/id308331524?mt=8

I've been writing software for 33yrs. I've many apps. I'd like to use html/xml to replace my aging IDE's. Firefox will no longer execuate a binary directly called from hypertext on the local system. Why?

I would rather not re-write the old IDE's I've been using for years but rather replace them with html/xml web style pages. Konqueror will locally execute binaries with a launcher script. Firefox, Chrome, re-Konq, WebPositive, and IE Explorer will not. If Firefox or SeaMonkey would execute my binaries I could easily replace the old IDE's and save myself and my clients a lot of time and money.

That isn't acceptable. I guess that if you don't want to tell me I'll go to Opera or Chrome and ask. I could simply disassemble the code. That takes a long time. 270 Clients some running software that was written as fare back as 1979. I know I'm small, but they have families and business to run. The cost of re-developing the IDE's is huge for small business. I had hoped you would help.

Bring Excel 2007 to the front when called from LabView v9 in Windows 7

I am building a duplicate system using Windows 7, LabView v9 and Excel v2007. The original system used WinXP, Excel 2007 and LabView v8.6. The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible. This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front. The icon blinks in the Win7 taskbar and when selected displays over LabView. If I minimize the Labview window, Excel is there. This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar. The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode. At the customers request, the new system uses the .xlsm extension on the Excel template files. I have tried using application.visible = True in the macro as well. Could be a setting in Labview? Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview.
HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
Thank you in advance
Stephen
Solved!
Go to Solution.

I will try the windowstate change. Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls?
I am not sure about the API since the discussion there is with regard to DDE. (Taken from the link document: If you want to call a DLL that contains ActiveX
objects, use the Automation
Open VI with the Property
Node and the Invoke
Node.). I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be. Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work? I may be trying this already but in Excel through the use of the macro I call from LabView. It contains application.visible = True at the beginning before reading files and plotting data.
I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro. The puzzle for me is the blinking Excel icon in the task bar. This means active and running but not visible or something wrong as well. There are a few #VALUE cells if not all test in the system are run. Again not a problem in Excel 2007-WinXP-LV8.6
Thank you again one and all.

Blocking skype calls from certain parts of the wor...

Hi, i was wondering if it's possible to configure my router or something to block incoming calls from people in the US calling me in europe while still being able to call people from europe to europe?

Hello,
That's not possible - nor necessary. Just adjust your "privacy" parameters
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Calls from Indonesia to Australia

Hi
I have a skype unlimited international calls and skype to go AU number - but from what i have read i dont think it works if i'm calling from Indonesia to AUS or USA. Is this correct, and if so, If Ilargely want to be calling from Indonesia to the States or Oz that these two products are probably not worth it? If there is an alternative option, please advise. Thanks in advance

Hotto wrote:
Hi
Is this correct,
Hello and welcome to the Skype Community!
No - it's not correct.
Your account shows that you have a current Unlimited World Subscription.
With your Unlimited World Subscription you can:
Call LANDLINES AND CELLPHONES in: Canada, China, Guam, Hong Kong, Puerto Rico, Singapore, Thailand, United States.
Call LANDLINES ONLY in: Andorra, Argentina, Australia, Austria, Belgium, Brazil, Brunei, Bulgaria, Chile, Colombia, Costa Rica, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Guadeloupe, Hungary, Iceland, Indonesia (Jakarta), Ireland, Republic of Ireland, Israel, Italy, Japan, Korea, Latvia, Lithuania, Luxembourg, Malaysia, Malta, Mexico, Morocco, Netherlands, New Zealand, Norway, Panama, Paraguay, Peru, Poland, Portugal, Romania, Russia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Turkey, United Kingdom, Venezuela.
Subscriptions work from any country worldwide. Your location is totally irrelevant.
I hope that this clarifies the situation for you .
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Call from Cameroon to USA

I have the $2.99 plan for unlimited calls to USA and Canada. If I'm in Cameroon Africa can I still call the USA on this plan or will I need to change plans

jaylan222 wrote:
Hi, can anyone tell me if the DROID X will be able to make a call FROM Europe TO the USA via a WiFi connection .... for FREE? Conceptually, I would think it would work.... but, I'm no "techie"......
Hi. I will be happy to answer your question regarding making a call using a Wifi connection. There is no application that comes with the phone that will allow you to do so. All calls can only be made through our 3G network. You can also check the application market on your phone to see if you see an application that fits your needs.
Please let me know if you have any other questions.
Thanks!

Call from africa to the US.

Similar Messages

Maybe you are looking for