Call from US to Brazil

Hello,I have a skype account and use it in Brazil to call national and international. Now I will be in the US and I would like to call from US to a land line in Brazil, a long meeting, like 4 hours duration. Can I do it with my account or should I buy independently. Sorry but I didi not find this question or answer and the amunt it would cost if it is pay as you go or a subscription? And if it is a subscription can I use the credit left back in Brazil?Thank you very much in advance.Simone

your Skype Online number is ONLY for receiving calls to Skype from the regular phone network, but the good news is that friends back in the USA can call your Online number (presumably a local call) for free and reach you anywhere in the world where you are signed in to Skype
to make scalls TO the regular phone network in the USA from Brazil, you need either Skype credit or a suitable subscription (Unlimited US and Canada sounds like a likely candidate because it covers both landlines AND mobile numbers)
Regards,
Neil

Similar Messages

Calls from Brazil to the US

I see how I can call from US to Brazil. But I want a subscription for calling from Brazil to the US. What do I do?

annescott-markl wrote:
I see how I can call from US to Brazil. But I want a subscription for calling from Brazil to the US. What do I do?
If you want a subscription, you want the Unlimited USA & Canada. You can call landlines and mobile phones in the USA and Canada for US$ 2.99/month. Otherwise, you can go without a subscription and pay per call. Rates for calls to the USA are 2.3 US cents/minute plus the connect fee, or 6 cents/minute plus the connect fee for Alaska.
Unlike calling to many other countries including Brazil with Skype, there is no price difference between calling a landline and calling a mobile phone in the States.
Click on the Subscriptions link at the bottom of this page, and put in USA for the desired country to see the subscription. Hope this helps...
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that

Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that Brazil has no repair services for Apple, which was the basis of its price change in the exchange is not worth half the value of the product.
I wonder how I do to change this device without the expense of 50% for the same product is in warranty?
Thanks in advance.

yes agree, plus a multinational seeing a product and has no technical assistance to do the maintenance then it's no use I buy a new product if it is damaged I will always be because it has no prejudice in this maintenance.
sorry but even more products coming from China to Brazil in technical assistance.

Calls from Indonesia to Australia

Hi
I have a skype unlimited international calls and skype to go AU number - but from what i have read i dont think it works if i'm calling from Indonesia to AUS or USA. Is this correct, and if so, If Ilargely want to be calling from Indonesia to the States or Oz that these two products are probably not worth it? If there is an alternative option, please advise. Thanks in advance

Hotto wrote:
Hi
Is this correct,
Hello and welcome to the Skype Community!
No - it's not correct.
Your account shows that you have a current Unlimited World Subscription.
With your Unlimited World Subscription you can:
Call LANDLINES AND CELLPHONES in: Canada, China, Guam, Hong Kong, Puerto Rico, Singapore, Thailand, United States.
Call LANDLINES ONLY in: Andorra, Argentina, Australia, Austria, Belgium, Brazil, Brunei, Bulgaria, Chile, Colombia, Costa Rica, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Guadeloupe, Hungary, Iceland, Indonesia (Jakarta), Ireland, Republic of Ireland, Israel, Italy, Japan, Korea, Latvia, Lithuania, Luxembourg, Malaysia, Malta, Mexico, Morocco, Netherlands, New Zealand, Norway, Panama, Paraguay, Peru, Poland, Portugal, Romania, Russia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Turkey, United Kingdom, Venezuela.
Subscriptions work from any country worldwide. Your location is totally irrelevant.
I hope that this clarifies the situation for you .
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Error while calling ejb service call from BPM service

Hi,
We are using the Oracle 11.1.1.5.0
We are calling ejb service call from BPM service to update the data to Oracle database.
We are getting the below error when we executing the ejb service call from BPM Service.
<Error> <EJB> <BEA-010026> <Exception occurred du
ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
articipant in two-phase commit. To force this participation, set the GlobalTrans
actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
o[ArCnTaskForms@EBSConnection@EBSConnection_base_domain]=(ServerResourceInfo[ArC
nTaskForms@EBSConnection@EBSConnection_base_domain]=(state=rolledback,assigned=s
oa_server1),xar=weblogic.jdbc.wrapper.JTSEmulateXAResourceImpl@fa5476,re-Registe
red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
/activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
ic, RL3TST_base_domain, ArCnTaskForms@EBSConnection@EBSConnection_base_domain, S
OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
gic.transaction.RollbackException: Could not prepare resource 'ArCnTaskForms@EBS
Connection@EBSConnection_base_domain
JDBC driver does not support XA, hence cannot be a participant in two-phase comm
it. To force this participation, set the GlobalTransactionsProtocol attribute to
LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
= EBSConnection
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
TransactionImpl.java:1881)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:345)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:239)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
Object.java:622)
at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
y(BaseLocalObject.java:455)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
ionLocalMethodInvoker.java:52)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
LocalBeanImpl.handleCallback(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:140)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
nce cannot be a participant in two-phase commit. To force this participation, se
t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
or EmulateTwoPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
.>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <failed to handle message
javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
be a participant in two-phase commit. To force this participation, set the Globa
lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
woPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:207)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
>
Could any body help on this issue.It is little bit urgent for us to resolve.
Thanks in advance.

Thanks Sudipto Desmukh,
The link is helpful me to resolve this issue.
Thanks,
Narasimha E

Did you know that verizon charges ¢50 for calls from the US to Canada? Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute. Amazing that they can charge this much for a call to Canada. I know they have it som

Did you know that verizon charges ¢50 for calls from the US to Canada? Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute. Amazing that they can charge this much for a call to Canada. I know they have it somewhere in their contract/website.

Did you know that verizon charges ¢50 for calls from the US to Canada? Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute. Amazing that they can charge this much for a call to Canada. I know they have it somewhere in their contract/website.

Fields appear as "Read Only" in an Int.Form called from a WD

Hi Experts!
I am having a doubt in an Adobe Int.Form, that is called from a WD application.
The fields that are in my Form, always appear as a "read only". It is not possible to modify anything there.
Here, I describe the steps that I follow.
I create a very simple WD application. In its WD View, exist an unique Object (Adobe Interactive Form).
In that object, I set the properties:
"Data source": a context variable type "my structure". "My structure", is a simple structure with a couple or three fields, let´s say PERNR, BUKRS, WERKS... It is linked to the Form Interface (ABAP DICTIONARY-BASED INTERFACE). So in this way, the link between my WD and the AdobeInt.Form is working.
"PDF Source": a context variable type XSTRING.
"Template Source": here I have set my Int.Form. Currently, it only contains a couple of fields
"Enabled": True.
"Read Only": False.
In the AdobeForm, I have drag & droped those 2 or 3 fields, save it, and activate it. I guess nothing more is needed, for my test.
And at last, in the View´s method WDDOINIT, I am reading one of those fields, let´s say the employee number (PERNR), and I set by hardcoding its number (let´s say -> 00000001).
Until here, everything seems to work fine. When I launch the WD test, the Adobeform appears, at the moment, with only one of my fields (Employee - PERNR), and its value is filled in with '00000001'.
But now, I would like to write something by myself. And when I try to do it, it is not possible! Field PERNR, is displayed as a "READ ONLY".
Someone knows what is happening here? I guess it should be possible, to activate as a "EDITABLE" that field in my Form.
So here is my doubt.
Am I doing anything wrong? Or am I doing any mistake?
Thank you very much in advance!

Finally I think I have found the problem.
In the View where I am printing the ADOBEFORM, it is needed this code under the method WDDOMODIFYVIEW.
method WDDOMODIFYVIEW .
DATA: LV_INTERACTIVE_FORM   TYPE REF TO CL_WD_INTERACTIVE_FORM,
             LV_METHOD_HANDLER     TYPE REF TO IF_WD_IACTIVE_FORM_METHOD_HNDL.
LV_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'INT_FORM' ). "   adobeform object in view
IF LV_INTERACTIVE_FORM IS NOT INITIAL.
      LV_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
      LV_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( ABAP_TRUE ).
      LV_METHOD_HANDLER->SET_HIDE_NAVIGATION_PANEL( ABAP_TRUE ).
      LV_METHOD_HANDLER->SET_DISABLE_PRINT_BUTTON( ABAP_TRUE ).
      WD_THIS->M_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
      WD_THIS->M_METHOD_HANDLER->SET_HIDE_TOOLBARS( ABAP_TRUE ).
    ENDIF.
endmethod.
Regards,
Carles

How displaying an alert message called from a database procedure

Hi,
How can I display an alert message that is called from a database procedure.
I've tried the following code:
l_al_button NUMBER;
l_al_message VARCHAR2(80);
l_al_id ALERT;
Set_Alert_Property(l_al_id, alert_message_text,l_al_message);
l_al_Button := show_alert(l_al_id);
When trying I receive an error that says that the word ALERT need to be declared.
Any suggestions?
Thanks

Hi,
leave the procedure without error handling.
This is what you can do:
1.Inside the database procedure-
BEGIN
RAISE_APPLICATION_ERROR (-20001, 'The chosen length of the Public Key Exponent ....');
END;
2.Into your Form -
BEGIN
EXCEPTION
WHEN OTHERS THEN
IF sqlcode = '-20001' THEN
Display Your Messages.
END IF;
Monica
END;

ON-LOGON does not fire in Form B, called from Form A

We have a situation like this. We are using Forms (Forms [32 Bit] Version 10.1.2.0.2 (Production)).
We migrated this application to Forms 11.2.0.1.0. Problem is that the ON-LOGON trigger does not fire in the 2nd level forms. Our application work like this.
(a.) User double-clicks URL icon.
(b.) Form A is opened without asking for un/pwd. We put a NULL; in the ON-LOGON of A.fmb.
(c.) This is the main form of the application. This has a canvas with 6 buttons. Each button will launch it's own separate application with it's own menu.
(d.) Now user presses button in A. This launches Form B. We use
Run_Product(FORMS, 'B', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL); (e.) Now, in Form B, in the ON-LOGON trigger we have put code to show the logon screen and login to the DB.
Problem is, this works in 10g Forms. But we had to replace the RUN_PRODUCT with a CALL_FORM after migrating to 11g since RUN_PRODUCT is not supported in 11g.
Problem is that when you use CALL_FORM to call Form B, the ON-LOGON of the Form B does not fire. We tried OPEN_FORM and NEW_FORM with different parameters, but the behavior is the same. i.e. ON-LOGON does not fire.
What is the solution or workaround for this please.
Edited by: user12240205 on Oct 15, 2012 4:50 AM
Edited by: user12240205 on Oct 15, 2012 4:52 AM

Michael Ferrante (Oracle) wrote:
If you need to open another form you should use CALL_FORM, OPEN_FORM, or NEW_FORM. In these cases, ON-LOGON will not automatically fire because the connect info is passed from the calling form. If you need to login from the called form then you need to need to programatically cause that to occur. Refer to the LOGON and LOGON_SCREEN built-ins in the Builder help for more info. You can fire these from almost any trigger you like, for example in a WHEN-NEW-FORM-INSTANCE trigger or where ever is appropriate for you application.Michael, we tried using the CALL_FORM, OPEN_FORM & NEW_FORM.
Also, there is NO connection to the DB, when B is called from A since we don't login to the DB in A (ON-LOGON has NULL;).
So, if there is no DB connection when B is called, shouldn't the ON-LOGON in B fire?
We tried firing the LOGON_SCREEN and LOGON in the WHEN-NEW-FORM-INSTANCE. But, for some reason, the we don't get the menu (we get a menu not found error). We tried correcting the paths and other things but still no solution.

Unable to call from my skype out account

Hi!
Iam unable to call from my skype out account to india, but i can able to call skype to skype users.pls advice.otherwise pls advice how to cancel the membership and get my money back.
Regards
Rajan

Contact your carrier.

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?

I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?

Stop answering calls with blocked numbers. If it's someone who really wants to talk to you, they'll leave you a message and you can call them back.

How do i make a phone call from my mac

i can't make a phone call from my mac nor receive phone calls

NO my mac is on a different wi-fi than my phone

How do I make a phone call from my mac with yosemite?

How do I make a phone call from my MacBook Pro on the Yosemite operating system?

The following quotation is from Connect your iPhone, iPad, iPod touch, and Mac using Continuity
There is more information in the link, including supported hardware and that you must have Settings > FaceTime > iPhone Cellular Calls set to on on the iPhone.
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
Make a call
To make a phone call on your Mac, iPad or iPod touch tap or click a phone number in Contacts, Calendar, or Safari.

I can send calls from Mac but incoming calls do not show up on Mac.

Just downloaded Yosemite 10.10 on 10-21-14. I can make calls on my mac but unable to receive calls on my Mac. No notifications for incoming calls on my mac. Everything else runs fine. Messaging and calls from my mac works fine. I am running IOS 8.1 on a iPhone 4s. I have a 2009 Macbook Pro 2.54 duo with 8 gb of ram.

There is no Adobe printer in recent versions of Mac OS. Look instead for a Save As Adobe PDF pull down.

Call from US to Brazil

Similar Messages

Maybe you are looking for