CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
Hi guys ,
I would like to restrict a select options. When I push the botton "multiple selection" in my select
options I would like that I can see only 2 tabs 'Exclude individual values' and 'Exclude intervals'.
I tried with the FM 'SELECT_OPTIONS_RESTRICT', but It doesn't work. When I execute sy-subrc = 5
'INVALID_SIGN' and I can't resolve it.
My code is:
SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: S_BUDAT FOR BKPF-BUDAT,
S_BELNR FOR BKPF-BELNR,
S_HKONT FOR BSEG-HKONT, <----*restric this*
S_BLART FOR BKPF-BLART,
S_BSTAT FOR BKPF-BSTAT.
SELECTION-SCREEN: END OF BLOCK B2.
INITIALIZATION.
CLEAR T_OPT_LIST.
T_OPT_LIST-NAME = 'S_HKONT'.
T_OPT_LIST-OPTIONS-EQ = 'X'.
T_OPT_LIST-OPTIONS-GE = 'X'.
APPEND T_OPT_LIST TO RESTRICT-OPT_LIST_TAB.
CLEAR T_***_TAB.
T_***_TAB-KIND = 'A'. "Apply only to the named SELECT-OPTION
T_***_TAB-NAME = 'S_HKONT'. "This is name of the SELECT-OPTION
T_***_TAB-SG_MAIN = 'I'.
T_***_TAB-OP_MAIN = 'S_HKONT'. "This must match opt_list-name
APPEND T_***_TAB TO RESTRICT-***_TAB.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
RESTRICTION = RESTRICT
EXCEPTIONS
TOO_LATE = 1
REPEATED = 2
SELOPT_WITHOUT_OPTIONS = 3
SELOPT_WITHOUT_SIGNS = 4
INVALID_SIGN = 5
EMPTY_OPTION_LIST = 6
INVALID_KIND = 7
REPEATED_KIND_A = 8
OTHERS = 9.
Thanks in advance.
Best Regards.
Edited by: Ana Marí on Apr 12, 2010 12:13 PM
Solution;
INICIALIZATION.
PERFORM INICIALIZACION_SELECT_OPTION.
FORM INICIALIZACION_SELECT_OPTION.
DATA: T_OPT_LIST TYPE SSCR_OPT_LIST, "switches controlling each option
T_***_TAB TYPE SSCR_***, "select-options to be restricted
RESTRICT TYPE SSCR_RESTRICT, "structure holding above 2 tables
TEXTO TYPE STRING,
L_SUBRC(4) TYPE N.
CLEAR T_***_TAB.
T_***_TAB-KIND = 'S'. "Apply only to the named SELECT-OPTION
T_***_TAB-NAME = 'S_HKONT'. "This is name of the SELECT-OPTION
T_***_TAB-SG_MAIN = 'I'. "I = ONLY Inclusions; * = Both
T_***_TAB-SG_ADDY = SPACE.
T_***_TAB-OP_MAIN = 'WHATEVER'. "This must match opt_list-name
APPEND T_***_TAB TO RESTRICT-***_TAB.
crear las restricviones del select option en t_opt_list.
CLEAR T_OPT_LIST.
T_OPT_LIST-NAME = 'WHATEVER'."This must match ***_tab-op_main
T_OPT_LIST-OPTIONS-BT = SPACE. "Do not permit BETWEEN
T_OPT_LIST-OPTIONS-CP = SPACE. " permit MATCHES-PATTERN
T_OPT_LIST-OPTIONS-EQ = SPACE. " Permit EQUALS
T_OPT_LIST-OPTIONS-GE = SPACE. "Do not permit GREATER-OR-EQUAL
T_OPT_LIST-OPTIONS-GT = SPACE. "Do not permit GREATER-THAN
T_OPT_LIST-OPTIONS-LE = SPACE. "Do not permit LESS-OR-EQUAL
T_OPT_LIST-OPTIONS-LT = SPACE. "Do not permit LESS-THAN
T_OPT_LIST-OPTIONS-NB = 'X' . "Do not permit NOT-BETWEEN
T_OPT_LIST-OPTIONS-NE = 'X'. "Do not permit NOT-EQUAL
T_OPT_LIST-OPTIONS-NP = 'X'. "Do not permit NO-PATTERN-MATCH
APPEND T_OPT_LIST TO RESTRICT-OPT_LIST_TAB.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
RESTRICTION = RESTRICT
EXCEPTIONS
TOO_LATE = 1
REPEATED = 2
SELOPT_WITHOUT_OPTIONS = 3
SELOPT_WITHOUT_SIGNS = 4
INVALID_SIGN = 5
EMPTY_OPTION_LIST = 6
INVALID_KIND = 7
REPEATED_KIND_A = 8
OTHERS = 9.
ENDFORM.
Similar Messages
-
Call function POPUP_TO_CONFIRM after Excel close
Good morning
I have written code like this
DATA: EXCEL TYPE OLE2_OBJECT.
DATA: BOOKS TYPE OLE2_OBJECT.
DATA: BOOK TYPE OLE2_OBJECT.
DATA: CELL TYPE OLE2_OBJECT.
DATA: FONT TYPE OLE2_OBJECT.
DATA: FILE TYPE OLE2_OBJECT.
CREATE OBJECT EXCEL 'EXCEL.APPLICATION'.
CALL METHOD OF EXCEL 'WORKBOOKS' = FILE.
CALL METHOD OF FILE 'OPEN'
EXPORTING
#1 = 'C:temp8D.xls'
#2 = 1.
CALL METHOD OF EXCEL 'CELLS' = CELL
EXPORTING
#1 = 6
#2 = 'C'.
SET PROPERTY OF CELL 'VALUE' = zak_pomoc.
CALL METHOD OF EXCEL 'QUIT'.
FREE OBJECT EXCEL.
If user has modified the 8D file I want display this file on the screen, but first function POPUP_TO_CONFIRM should ask him if he really wants to show file.
I make it like this.
call function 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'Display report'
TEXT_QUESTION = 'Display report 8D?'
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
START_COLUMN = 25
START_ROW = 6
IMPORTING
answer = ans.
if ans eq '1'.
DATA gs_excel TYPE ole2_object .
DATA gs_wbooks TYPE ole2_object .
DATA gs_wbook TYPE ole2_object .
DATA gs_application TYPE ole2_object .
CREATE OBJECT gs_excel 'EXCEL.APPLICATION' .
SET PROPERTY OF gs_excel 'Visible' = 1 .
GET PROPERTY OF gs_excel 'Workbooks' = gs_wbooks .
GET PROPERTY OF gs_wbooks 'Application' = gs_application .
*--Opening the existing document
CALL METHOD OF gs_wbooks 'Open' = gs_wbook
EXPORTING
#1 = 'c:temp8D.xls'.
endif.
But there is my problem because two windows: first- asking about saving the file and the second- asking about showing the file, pop up in this same time.
What condition should I write to call second window after this first one?
Please, any suggestions?
Thank you.Hello
I'm just beginner and there is one thing I don't understand. Between lines
CALL METHOD OF EXCEL 'QUIT'
and
FREE OBJECT EXCEL
the window 'Do you want save changes' appears. And in that moment what is the value that says if the user chooses OK or QUIT?
If I would know that value, I could call function POPUP_TO_CONFIRM in the right moment. -
Call Function Destination in a background job
I am having a problem using:
CALL FUNCTION 'TABLE_ENTRIES_GET_VIA_RFC'
DESTINATION p_dest
in a background job.
I am working on a program that would compare the same table in 2 different systems and write the differences. It works when I run it in the foreground. However, I want to run this in a nightly background job. However, it is failing and I beleive that it is the result of the program needing a user to interactively logon to the remote system.
How can I bypass the logon screen or enter information into the logon screen using a background job?
Thanks.
JonHi Jonathan,
Would you like to reward some points to the poster to thank them as a part of SDN Contributor Recognition Program?
You can click on the yellow star on the right of each post header to reward points.
For more information:
https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.htm
John. -
Uncatchable exception: BSP calling Function Module
Hi all,
currently i'm facing a very weird problem. My application class calls function module
HR_INFOTYPE_OPERATION. Normally, in case of an error, the function module gives you back a return parameter. But if i call it from my BSP, the processing doesn't leave the function module. It directly throws an exception ERROR_MESSAGE_STATE instead of writing the message into parameter return.
If i call the function module with the same parameters from a report, it works fine and the error message is written to return parameter without throwing an exception.
What am i doing wrong? I don't want that exception and need to go on with filled parameter result.
Regards
Mark-AndréHi MA,
try using ERROR_MESSAGE in the exceptions list, like this.
CALL FUNCTION 'func_name'
EXPORTING
string = text
pos = position
IMPORTING
string1 = text1
string2 = text2
EXCEPTIONS
string1_too_small = 1
string2_too_small = 2
ERROR_MESSAGE = 3
OTHERS = 4.
Cheers
Graham Robbo -
What is the use of CALL FUNCTION MODULE - AT BACKGROUND TASK?
Hi experts,
I found Call functional module in background task will make the FM run at the next commit work as some people said. So I have some questions:
1 if we use COMMIT WORK commend, the pending FM will be called? If there are several FMs called at background task, what is the sequence of them? How many conditions will trigger the running of these FMs?
2 Where can I find the log of this pending FMs? In SAP library, it says there are 2 tables. But I checked these tables and can only find the FM name and user of it. And I can not understand content of these tables. It seems one is for the main information of FM, and the other is for the data of the FM, maybe the parameters.
3 If I call a FM in this way, Can I canncel it before the next commit work in some way?
Finally, thanks for reading and help.HI,
When the COMMIT WORK statement is executed, the function modules registered for the current SAP-LUW are started in the order in which they were registered. ROLLBACK WORK deletes all previous registrations for the current SAP-LUW.
If the specified destination is not available when COMMIT WORK is executed, an executable program called RSARFCSE is started in background processing. By default, this tries to start the function modules registered for a SAP-LUW in their destination every 15 minutes and up to 30 times. These parameters can be changed in the transaction SM59. If the destination does not become available within the defined time, it is recorded in the database table ARFCSDATA as the entry "CPICERR". The entry in the database table ARFCSSTATE is deleted after a standard period of eight days -
How to fill data when call function of sap standard script form?
Hi every experts,
<Priority Normalized>
In our system, when we log in 'FR', we can print purchase order in language Franch,in t_code:ME22N. And when logging in 'EN', we can print it in language English, in ME22N. The English form is just only translated from Franch, with all same structure and frame. The form is done by script form.
And when logging in 'ZH', we create a new program, calling function smartform, instead of translating from EN language. Because of different structure and frame, I don't know the way to write script, so I print puchase order by smartform, when logging in 'ZH'.
But I have a new issue. Our MM module consultant needs me to print Chinese form if one condition, print English form in other condition.
So I have no idea to solve it. Because in my program, I get data to fill smartform and call function of smartform. And I don't know how to get data to fill script form. I only know the function name, 'OPEN_FORM' 'WRITE_FORM' 'CLOSE_FORM'.....
If I only call the several functions, I will get only frame without no data. So who can tell me how to do????
<Urgency downgraded>
Edited by: Suhas Saha on Jul 26, 2011 3:34 PM
Edited by: Vinod Kumar on Jul 26, 2011 4:09 PMHi,
Normally if we look in NACE transaction, you can see that upto five different FORMS can be assigned to a single output type . i.e. for each form there will be a seperate routine through which it gets called. But it all start from the first form only.
so you need to write your code in the ENTRY of the first form and if it does not satisfy do not go for processing of it but just exit of that form ENTRY. so that it will take you to next form.
hope this helps.
Thanks,
Venkatesh -
Function Module CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH'
Hello All,
While using CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH' to download to Unix file in GLD (Version 4.5b) the F.M is working fine, but in KLD(Version ECC 6.0) CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH' is not working & the error message is displayed saying incomplete filename.
Could you let me know any alternate Function Module/ Method in this regard.
ThanksHi,
In ECC6 also Its Working fine only.
1. Go to SE37 -> Enter FM Name -> Test(F8).
2. Give any file path and test it.
Thanks,
Reward If Helpful. -
Call function 'gui_download'
Hallo Friends,
I am using the above fuction in my program. I want the header of my internal table to be writen als header in the text file. So, I created another Itab (Itab-col_1) and appended all the headers in this, which I later use as below.
Problem:
1.
I am not satisfied with the downloaded output in file.txt I want the header to be excactly over the column content. Please see my output:
MANDT LIFNR LAND1 NAME1 NAME2 NAME3
010§§§§§§0000010000§§§§§§§§§§§§§§§§§§DE§§§§§§Test
010§§§§§§0000100000§§§§§§§§§§§§§§§§§§US§§§§§§TEST
§ § means Space
It is Obvious LAND1 should be over DE / US, NAME1 should be over Test / TEST etc etc
2.
I would like filed seperator to be ( ; ) not space. The flag 'X' gives space.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = str
filetype = 'ASC'
write_field_separator = 'X'
dat_mode = 'X'
TABLES
data_tab = itab_kreditor
fieldnames = itab_datei_col_header
EXCEPTIONS
file_write_error = 1
file_not_found = 19
OTHERS = 22.
So, how can I solve these two problems.
Blacky.CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = BIN_FILESIZE
filename = filename
FILETYPE = 'ASC'
APPEND = ' '
<b> WRITE_FIELD_SEPARATOR = ';'</b>
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = FILELENGTH
TABLES
data_tab = data_tab
FIELDNAMES = FIELDNAMES
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Vasu -
Fm CALL FUNCTION 'GUI_DOWNLOAD'
hi experts:
How to add a field name line in fm 'GUI_DOWNLOAD'?
allenhI,
DATA: V_PATH TYPE STRING.
V_PATH = P_FILE.
**-- Function GUI_DOWNLOAD is used to save the data back in the
**-- flat file from the internal table
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = V_PATH
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_PIPE
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
****DO REWARD IF USEFULL
VIJAY -
Call function RFC in a loop and kill old session
Hi,
we have a problem with a program.
here's a part of the code:
DO.
CALL FUNCTION 'YC_REFRESH_GPT_START_CM25' STARTING NEW TASK 'TEST'
EXPORTING
i_profile = p_prfl
i_werks = p_werks
i_arbpl_low = s_arbpl-low
i_arbpl_high = s_arbpl-high
TABLES
t_arbpl = it_arbpl.
PERFORM wait_for_refresh.
PERFORM terminate_session.
ENDDO.
So the program does a call function, waits a while, then terminates the session and recalls the function.
Apparently, like this the data should be updated.
But in the terminate session, the session is terminated using:
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_delete_mode
ID 'MODE' FIELD l_mode.
And it works the first time, but the second time there is a dump.
So, is there another way to achieve what this program is trying to do?
Or is there another way to kill the session?
Thanks!!Hi,
the DLL will stay in memory as long as there is a program running which has not closed (unloaded) the DLL.
Doing repetitive calls to the DLL is irrelevant in this context. LV opens the DLL as soon as needed and will only unload it when there is no VI in memory which has a CLN to that DLL...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Approximate operator and recursive call function in abap
Dear expert,
Please give me an example about Approximate operator and recursive call function in abap
thanks so muchHi
About Approximate operator, you can go to tcode 'ABAPDOCU', searching CO,CN,CA etc...each of them have example there.
And recursive function,
Say here is a FM,
FUNCTION recursive_get_number.
*import im_num type i.
*export ex_num type i.
ex_num = im_num + 1.
IF ex_num GE 100.
EXIT.
ELSE.
CALL FUNCTION recursive_get_number
EXPORTING
im_num = ex_num
IMPORTING
ex_num = ex_num.
ENDIF.
ENDFUNCTION.
When you call this function from outside with importing parameter '1', then will return you 100.
regards,
Archer. -
Call function in abap routine of infopackage
Experts,
Good day. I have a problem concerning the data to be imported in my ods.I can't find a similar thread corcerning my problem. My File date field should contain only 2 years and 3months data of recent data. I'm using a call function fima_date_create to filter values of zfile_date.
CALL FUNCTION 'FIMA_DATE_CREATE'
EXPORTING
I_DATE = sy-datum
I_FLG_END_OF_MONTH = ' '
I_YEARS = 2-
I_MONTHS = 3-
I_DAYS = 0
I_CALENDAR_DAYS = 0
I_SET_LAST_DAY_OF_MONTH = ' '
IMPORTING
E_DATE =
E_FLG_END_OF_MONTH =
E_DAYS_OF_I_DATE =
The sy-datum becomes the High value and the date generated by this FM will be the low value. I already tested this function module and it is what i want. How Should I write the ABAP code for this in the abap routine for my infopackage? Or what steps do I need to take.Hi,
When you choose the option to write a routine for one of the characteristics in the infopackage selections, you get a window to write your code with some prewritten code as below. Modify it as shown below, for your requirement.
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'CALDAY'.
l_idx = sy-tabix.
START of YOUR CODE
<----
Required logic -
>
L_T_RANGE-LOW = <lower limit of range>.
L_T_RANGE-HIGH = <upper limit of range>.
L_T_RANGE-SIGN = 'I'.
L_T_RANGE-OPTION = 'BT'.
END of YOUR CODE
modify l_t_range index l_idx.
p_subrc = 0.
Hope this helps. -
Help:alternate for calling function in where clause
Hi ,
In below query i'm calling function in where clause to avoid COMPLETE status records,due to this query taking 700 secs to return result.If i'm remove below function condition it's returning results with in 5 secs.Can you some one advice to any alternate idea for this?
WHERE mark_status != 'COMPLETE'
SELECT assessment_school,
subject,
subject_option,
lvl,
component,mark_status,
mark_status
NULL AS grade_status,
NULL AS sample_status,
:v_year,
:v_month,
:v_formated_date,
:v_type,
cand_lang
FROM
(SELECT assessment_school,
subject,
subject_option,
lvl,
programme,
component,
paper_code,
cand_lang,
mark_entry.get_ia_entry_status(:v_year, :v_month, assessment_school, subject_option, lvl, cand_lang, component, paper_code) AS mark_status
FROM
(SELECT DISTINCT ccr.assessment_school,
ccr.subject,
ccr.subject_option,
ccr.lvl,
ccr.programme,
ccr.language AS cand_lang,
ccr.paper_code,
ccr.component
FROM candidate_component_reg ccr
WHERE ccr.split_session_year = :v_year
AND ccr.split_session_month = :v_month
AND EXISTS
(SELECT 1
FROM IBIS.subject_component sc
WHERE sc.year = ccr.split_session_year
AND sc.month = ccr.split_session_month
AND sc.paper_code = ccr.paper_code
AND sc.assessment_type = 'INTERNAL'
AND sc.subject_option NOT LIKE '%self taught%'
AND sc.component NOT IN ('PERFORMANCE PRODUCTION','PRESENTATION WORK','REFLECTIVE PROJECT','SPECIAL SYLLABUS INT. ASSESSMENT')
AND NVL(ccr.withdrawn,'N') = 'N'
AND ccr.mark_status != 'COMPLETE'
AND EXISTS
(SELECT 1
FROM school s
WHERE s.school_code = ccr.assessment_school
AND s.training_school = 'N'
WHERE mark_status != 'COMPLETE';One thing you can test quickly is to put the function call in it's own select ...from dual.
This might make a difference.
However, only you can check this, I don't have your tables or data.
So, what happens if you use:
paper_code,
cand_lang,
(select mark_entry.get_ia_entry_status(:v_year, :v_month, assessment_school, subject_option, lvl, cand_lang, component, paper_code) from dual ) AS mark_status
FROM
(SELECT DISTINCT ccr.assessment_school, --<< is the DISTINCT really needed?
ccr.subject,
ccr.subject_option,
...Also, try to find out the purpose of that above DISTINCT, is it really needed or is there some join missing? -
I have written the FM Call function 'COMMITROUTINE' in update task.
but this FM is not getting triggered when some commit happens. In all, this FM is not commiting tha data in the table.
CALL FUNCTION 'COMMITROUTINE' IN UPDATE TASK
EXPORTING
lt_dfkkbrlevyrec = lt_dfkkbrlevyrec
and the
What is missing in it?
Regards,
Seema Dadhwal.Hi,
if you want to call your FM when a commit happens you should write a routine which is called upon commit and this routine will call your fm.
e.g
form call_my_fm .
CALL FUNCTION 'COMMITROUTINE' IN UPDATE TASK
EXPORTING
lt_dfkkbrlevyrec = lt_dfkkbrlevyrec
endform.
perform call_my_fm on commit.
commit work. " now your routine will be called
Kostas -
Call function in update task empty variables error
Hello,
I'm experiencing a weird error while using the addition "In update task".
My Scenario is the following:
Use the bapi_goodsmvt_create -> if there are no errors, fill some values and call my function and then commit everything.
The problem is, when the function runs in update task, all import parameters are empty!
Also, this only happens in the following code structure
CALL METHOD run_migo( IMPORTING bapireturn = t_bapireturn).
IF t_bapireturn IS INITIAL.
CALL METHOD save_custom_tables. "this runs my function 'IN UPDATE TASK'
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
if I commit inside the method SAVE_CUSTOM_TABLES, the data is passed normally to the function, if I commit like the code above, everything is empty.Here's the code:
METHOD save_partial.
DATA: t_wegritm LIKE gt_wegritm,
t_tegrp_parc TYPE TABLE OF ztegrp_parc,
w_tegrp_parc TYPE ztegrp_parc,
w_tegrk_parc TYPE ztegrk_parc.
FIELD-SYMBOLS <w_wegritm> LIKE LINE OF t_wegritm.
t_wegritm = gt_wegritm.
DELETE t_wegritm WHERE mengee IS INITIAL.
CHECK NOT t_wegritm IS INITIAL.
*-->save xml iten
LOOP AT t_wegritm ASSIGNING <w_wegritm>.
MOVE-CORRESPONDING <w_wegritm> TO w_tegrp_parc.
w_tegrp_parc-id = gw_tegrk-id.
w_tegrp_parc-gr_docto = <w_wegritm>-gr_docto.
w_tegrp_parc-gr_mjahr = <w_wegritm>-gr_mjahr.
w_tegrp_parc-gr_zeile = <w_wegritm>-gr_zeile.
APPEND w_tegrp_parc TO t_tegrp_parc.
ENDLOOP.
MOVE-CORRESPONDING gw_tegrk TO w_tegrk_parc.
CALL FUNCTION 'Z_SAVE_PARTIAL'
IN UPDATE TASK
EXPORTING
iw_tegrk_parc = w_tegrk_parc
TABLES
it_tegrp_parc = t_tegrp_parc.
ENDMETHOD.
I tried to re-create this scenario with a local class, but the code that I originally sent worked(the commit work outside of the routine).
Maybe you are looking for
-
Hi, I am creating a new logical column on my fact table and would like to use time series function(AGO) to compare trends a month ago. I have a time dimension too. I am using this expression defined in the new logical column properties: Ago("HCBF"."W
-
I have make a Merge file from Pages. When I go to print this, the Header and Graphic is only printing on every other page. Can anyone advise?
-
Control Panel LCD Screen is too dark.
Is there a way to brighten the LCD screen on the control panel? Thanks. This question was solved. View Solution.
-
Wireless dhcp issue after upgrading WLC to 7.6.100
Hi All, We have upgraded our controllers to version 7.6.100. After upgrading, the access points also upgraded their version to 15.2(4)JB3. But, the problem is that after this process the APs do not get IP. It stays on this state: *Sep 26 03:55:36.334
-
Email generated by ABAP program reside in SOST got automatically send out
Hi, In our test environment, we tested on the developed program with generating email. We have disable SMTP in our non-Proudction environment therefore there are a lot of unsend email. In october, we have enable the SMPT for testing some of new email