CALL FUNCTION STARTING NEW TASK DESTINATION

Hi All,
I have tried to use CALL FUNCTION 'ZWHV_TEST' STARTING NEW TASK 'TEST' DESTINATION 'NONE' But it didnt work.
Please explain me to use above statement and detail me more about NEW TASK 'TEST'.
How to declare TEST in new task ?
Thanks ,
Vinay.

>
Vinay parakala wrote:
> ...But it didnt work.
Moderator message - Give more information please in a new thread - post locked

Similar Messages

COMMUNICATION_FAILURE in CALL FUNCTION STARTING NEW TASK/Background task

Hi friends,
I am trying to use a FM in a Print Program (when user prints a document), using
CALL FUNCTION STARTING NEW TASK 'TASK' DESTINATION 'NONE'.
The program is triggered from VL02N tcode.
But it's giving an exception - COMMUNICATION_FAILURE. Message is Error when opening an RFC connection
I also tried
CALL FUNCTION IN BACKGROUND TASK as Separate Unit
then error message pops up - Database error when recording transactional RFC
We are attaching a PDF file of the print to content server within this function module and because the "attaching" takes a while, this part needs to be detached from the print program so that we can avoid performance issue.
I can't figure out the issue. i gues this is happening because print program is already running in Update task. I also tried with RFC enabled FM. Please help me resolve/understand the issue.
Appreciate your help.
Regards,
Ronjan.

Hi Ronjan,
COMMUNICATION_FAILURE. Message is Error when opening an RFC connection
I guess the reason for the above is that every RFC call synchronous/Asynchronous issues a DB COMMIT and we cannot have DB COMMITs in the V1/V2 updates, please go through the link below.
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/23/e9aa61638e404d81575e939b5cd847/frameset.htm
Now, the possible solutions i can think of are,
1) Call the FM in update task delayed start and try.
2) Or create a report program and use SUBMIT (look at the job options as well).
@Mainak
3. Write a statement COMMIT WORK AND WAIT. This will actually invoke the FM
Mainak, this will lead to a Update termination, as the program is running in an update task.
Regards,
Chen

Use of CALL FUNCTION - STARTING NEW TASK parameter_list.

SELECT strt_code
             city_code
             commu_code
             regiogroup
      INTO TABLE gt_adrstreet1
      FROM adrstreet
      FOR ALL ENTRIES IN gt_street_district
      WHERE strt_code EQ gt_street_district-strt_code.
To optimize the performance of teh above query I am planning to use call function CALL FUNCTION - STARTING NEW TASK .....
by spliting the above internal table gt_street_district into two internal tables and use the value of each internal table into two different queries and these queries will be put in call function - start new task ....so that these queries are run in different workprocess and thus improve the performance of the program.
Can you please let me know if this would be a good option and also how to implement the same.
Thanks.....

>To optimize the performance of teh above query I am planning to use call function CALL FUNCTION - STARTING NEW TASK .....
nonsense! You should not try parallel processing for a non-optimized SELECT statement.
Better add the first key field of the WHERE condition as said above and check
+ whether the driver table is empfty
+ and whether there are duplicated entries
... And it is also a good idea to really use the SINGLE RECORD BUFFER, therefore you must write
field-symbol: <fs> type ...
LOOP AT gt_street_district ASSIGNING <fs>
   SELECT *
                INTO TABLE gt_adrstreet1
                FROM adrstreet
                WHERE counrty =
                 AND       strt_code = <fs>-strt_code.
ENDLOOP.
Then it will be extremely fast!

Parallel Processing Issue : call function starting new task

Hi
I am using the parallel processing functionality using the call function new task destination in group default Performing on end of task inside a loop ( i am splitting the internal table )
However when i am debugging the code, i am able to see the function module( it opens a new session in debugging ) , and i see that new task is started after the RFC Function module is executed .
How is this parallel processing ? I mean the new task starts after control returns back to main program , after the execution of the RFC FM.
I thought the idea was to have the same FM executing in multi threads. So that time is saved.

Thanks for the answers.
There were too many complications in the 'call function in new task ' option.
So we are trying it with the job submit option. So we are splitting up the data into smaller tables and submiting it with this statement : Submit 'prog' with selection-table 's_sel' via job 'job' and return .
Thanks

Call function starting new task:

I am trying to create a program in which few database update are mentioned.
after database updates , I am calling a function module using starting new task
in which I want to commit database updates inside in function module.
Problem is I want to commit only database updates if function module , not of main program. For that I tried using COMMIT WORK in function module and rollback statement after calling FM. But it is not working.COMMIT statement in FM also commiting database updates of main program also that is not required.
Can anybody help me in solving this problem.
Thanks
Ruchika

I think this may be caused by an implicit database commit performed by the system at the moment of calling a fm with "starting new task".
Try the following test:
- Put "rollback work" statement inside your fm which you call "starting new task" (instead of "commit") and check if the updates performed by the code executed before the call to this fm are stored in db - inspite of the rollback. If they are (as I suppose) this means that the commit effect you observe is not due to the "commit work" statement executed inside your fm but due to an implicit commit issued automatically at the time of calling the fm. If this is the case the solution could be placing the code which you now execute before "call function...starting new task" into a seperate fm called "in update task" - then the final commit or rollback statement in your main program should have the expected effect.
regards

Call Function STARTING NEW TASK ----- Resource not available

Hi All,
I am calling a Function Module in new task using STARTING NEW TASK.
If the resources are not available for the Dialog Process to start, for how long will SAP keep on trying to acquire the resources and in case if it fails to acquire resource, then what will happen
Regards,
Abhishek

Hi,
From memory (as it is a long time since I've done this) you can call another function module or SAP command that will tell you how many work processes are currently available before you actually then start the new task. This can help you to avoid this issue and also stop you from eating up all available work processes on a system which will annoy all other users!
I think this is the FM
CALL FUNCTION 'SPBT_INITIALIZE'
EXPORTING
    group_name     = 'parallel_generators'
IMPORTING
    free_pbt_wps   = w_free_processes
EXCEPTIONS
    OTHERS         = 1.
Gareth.

CALL FUNCTION STARTING NEW TASK Debug

Hi,
How can you debug a function module which is called with an add on 'STARTING NEW TASK' ?
Thank you.

Hi,
the only way i know is :
1. Create an endless loop in the FM like:
clear x.
do.
if x = 1. exit. endif.
enddo.
Now run the program. If you call the sm50 trx you'll see a new task : your function module. Now get the session in debug (Menu Program/Sessio -> Program -> Debugging) and change the x value to exit form the loop. Continue with the debug.
Regards
Andrea

Facing problem in call function starting new task taskname

Hi all,
when i call a function module using starting new task, it is failing with sy-subrc 3. can anyone guide me in this.
see the code :
DATA   lv_taskname(7) TYPE c VALUE 'PEM_EXE'.
    CALL FUNCTION 'PEM_SCHEDULE' STARTING NEW TASK lv_taskname
         EXPORTING
              iv_packid             = gv_packid
              iv_pebid              = ls_alv_out-peb_id
         EXCEPTIONS
              invalid_state_request = 1
              database_error        = 2
              OTHERS                = 3.
Thanks in advance.
Best Regards,
Prashant

when i change the function module from normal to remote, it gives me a error that the "generic types are not allowed in RFC", but i have not given any generic type in the parameters.
see the signature of the function module.
*" IMPORTING
*"     VALUE(IV_PACKID) TYPE CNVMBTPACK-PACKID
*"     VALUE(IV_PEBID) TYPE CNVMBTPEB-PEB_ID
*" EXPORTING
*"     VALUE(EV_ERROR_DETECTED) TYPE C
*"     VALUE(EV_STOP) TYPE C
*" EXCEPTIONS
*"      INVALID_STATE_REQUEST
*"      DATABASE_ERROR
*"      FORIEGN_LOCK
Can u please check it and find out the problem
Thanks,
Prasanth

Call function starting new task - Issue with memory variables

Hi All,
From our OIL application we have a call to the core delivery update FM WS_DELIVERY_UPDATE starting new task.Before the call we are exporting a variable to memory and deep inside the FM we have an oil routine which checks the value of this variable to decide on further flow. But since the FM is called in new task the variable is not available here.
We cannot use the SET GET parameter also as this value can be different for each session.
Can anyone suggest how to set and get the parameter value in this flow.
With regards,
Usha

Hi again,
To check whether the FM is running in new task or not - This is what I have tried (this may not be the best way), but it works fine.
1. The variable to check inside the called FM is SY-CPROG.
2. This variable will have value.
RS_TESTFRAME_CALL - If being checked from se37
Z / Y program - if called from the original z / y program (WITHOUT new task).
SAPMSSY1 - if being called using NEW TASK (and no debugging)
hope this helps.
Regards,
Amit Mittal.

Behaviour of CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE'

As per ABAP help documentation, the statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' should create a new main session in same user session.The behaviour is wrong as per documentation.
But current behaviour:
The statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' is creating a new user session.
Any reason?

Hi Prakash,
I'd agree with Suhas, that you're reading the documentation wrong. Here's your quote:
As per ABAP help documentation, the statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' should create a new main session in current user session.
If you look at the help, you can see that it says:
When the destination NONE is used, a new main session is opened for the current user session.
Do you see the difference? Also, note that in this context main session basically means that we're talking about a new external session:
Each task ID defines a separate RFC connection with its own context, meaning that, in the case of repeated function module calls of the same task ID, the global data of the relevant function group can be accessed, if the connection still exists.
In dialog processing, note that the maximum number of six main sessions cannot be exceeded, else an error message is displayed.
If you're still in doubt, check out the online ABAP documentation for [CALL FUNCTION - STARTING NEW TASK|http://help.sap.com/abapdocu_70/en/ABAPCALL_FUNCTION_STARTING.htm]. So I'd say the documentation is in line with the actual behavior.
Cheers, harald

Calling function in NEW TASK

Hi,
I am creating a program which calls a function, becuse the function gets list of 2000 employess and run for long time over the amount of employees i wrote "call function zxxxxx starting new task p_task_number...."
My question is - how many tasks can i create ? can i run the function in 10 tasks (20 employees in each task)????
thanks
Elad

Hi Diwakar,
try CALL FUNCTION func STARTING NEW TASK task1 DESTINATION dest IN GROUP DEFAULT, this will enable to run FM in groups (parallel processing) and might help in performance as will itself take care of available Application server.
Not true, you can call an FM(which needs to be RFC of course) just like below, and you would still achieve parallel processing, read IN GROUP for more details on when and where to use it.
DATA: l_task TYPE char10.
DO 5 TIMES.
l_task = sy-index.
CONDENSE l_task.
CONCATENATE 'TASK' l_task INTO l_task.
CALL FUNCTION 'ZTEST_CHEN' STARTING NEW TASK l_task.
ENDDO.
Regards,
Chen
Edited by: Chen K V on May 26, 2011 2:55 PM

Call function creatung new task

Hi friends,
I am running f110 in background...I have a Z function module which runs in update task....Insoide the z function module i have another rfc enabled function module where the updating of the docs is taking place....i am not able to get into the code of third fm through debugging...I have covered max scenarios of debugiing session external update system but none is fruitfull.
also,i have put infinite loop to see in sm50 ...there also i dont have rights...
could somebody tell me ow i get into the code through debugging
kanishak

Hi Kanishak,
if you call the function creating NEW TASK, you won't get to debugger easily: The function is enqueued in a TRFC queue which you could stop - but as you are not allowed SM50 you won't be allowed TRFC queue administration.
If you are allowed to use transaction SAAB, you can create and activate a checkpoint group. Use statement LOG-POINT to record contents of some program fields. Then you can see what is happening in background of background.
Regards,
Clemens

Call function in new task in RECEIVE RESULTS module

Hello Gurus,
at the end of one of the parallel tasks I have in my program I have to trigger a new task. The problem is that this is not permitted
Does anyone have a solution for this very very nasty problem?? I can't belive this is not possible.
I am starting about 8 tasks and after each one is ready I have to start the next set of tasks but do not want to wait until all of them are finished.
Regards,
Ioan.

Normally you control starting of new tasks via global counters (one of the very few reasons to use global variables...) that track the number of tasks started and finished, and compare that to the number of DIA processes reserved for the parallel RFC action using the WAIT UNTIL command. This way new tasks are started once processes become available again.
I don't see a reason to start new tasks in the RECEIVE RESULTS section, and it's obviously not allowed anyway.
Thomas
P.S. now I see the previous reply, but I'll let mine stand nevertheless

Facing issue with tRFC (CALL FUNCTION in BACKGROUND TASK DESTINATION

In transcation CJ20N there is aBADI call ZCL_IM_CL_IM_PROJ_UPDATE in which there is a method
IF_EX_PROJECTDEF_UPDATE~AT_SAVE. My requirement is that when the status of the project is changed and saved then after the SAVE some actions are to be performed (BDC for transcation CJ30 & CJ9FS are to be called).
Since this method is called AT SAVE and i need to call the bdc after the comit (of SAVE) is done. So I have made a RFC FM in which I am calling the bdc. and then calling the FM as
CALL FUNCTION <FM> in BACKGROUND TASK DESTINATION <sy-sysid>.
For the txn. CJ9FS bdc this method is working fine and bdc is called after SAVE but for txn. CJ30, at times,the bdc is not working though if I run the BDC FM seperately using SE37 then its working fine.
Can any body guide me where I am going wrong.

The scenario works fine for me. The issue was unable to create a proper test condition in the RFC.
CALL FUNCTION 'ZMY_RFCASYNC'
   IN BACKGROUND TASK
   EXPORTING...
   TABLES...
   EXCEPTIONS...
Simulated error condition in 'ZMY_RFCASYNC'
and got entry in SM58 by simply making an exception.
Thank you all.

Problem in Call function .. starting new task

Hi,
I want to execute a dialog program in background. I am trying to use call function starting new task.
I am facing some syntax issue. Can any one guide me how to use call function starting new task. The function module is RFC FM. Do we need to define task some where before use please guide.
Thanks in advance. A sample program will be gr8.

Hi,
Incase you want to call a RFC FM in background you can call ity like this.
     call function 'Y_L_TO_CREATE_HUPAST' in background task
             exporting
          venum   = y_v_venum
          backg   = 'X'
           buser   = y_lv_uname
          langu   = sy-langu
          objky   = y_lv_objky
          printer = y_lv_printer.
Here Y_L_TO_CREATE_HUPAST is a RFC FM.
Regards,
Ankur Parab

CALL FUNCTION STARTING NEW TASK DESTINATION

Similar Messages

Maybe you are looking for