Call function zxyz with destination g_dest.

Hi Group,
What happens is when I double click on this FM zxyz it says that it doesnt exist and do you want to create an object, any ideas why its saying like that? This is the same code running of live systems, but on the test environment it says this message.
Your replies on this would be greatly appreciated.
Thanks,
Kumar

Hi Greg,
It doesnt exists on SE37 and I am double clicking on that particular FM to get it navigated to FM code yaaa and on Development as well and its the same message.
Hi Thomas,
Remote system here is pointing to the Live system, does it means does it only exists on R/3 live, without getting developed on Dev system?
Thank you very much for your thoughts. Please could you further drill down this issue and I would come up with more details you require....
Thanks,
Varun.

Similar Messages

Type error while calling function module with in FOX formula

Hi,
I am getting following error while calling function module from FOX Formula:
"Types of parameter DAY_IN () and variable J_CALDAY(D) are inconsistent"
Following is the code:
DATA    I_CALDAY       TYPE 0CALDAY.
DATA    N_CALDAY       TYPE 0CALDAY.
DATA    KYF              TYPE KEYFIGURE_NAME.
FOREACH   I_CALDAY, KYF.
   CALL FUNCTION SLS_MISC_GET_LAST_DAY_OF_MONTH
      EXPORTING
         DAY_IN = I_CALDAY
      IMPORTING
         LAST_DAY_OF_MONTH = N_CALDAY.
    {KYF, N_CALDAY} = {KYF, L_CALDAY}.
ENDFOR.
Import parameter DAY_IN is of type sy-datum (that inturn is data element SYDATUM of data type DATS - same as 0CALDAY). Not sure why error is being thrown. Any idea? Thanks.
Edited by: SAP_BOY on Dec 4, 2009 5:26 PM

Hi,
I think It will not identify ,though you have (data element SYDATUM of data type DATS - same as 0CALDAY).Check it out by assigning it through a variable of type D.
Data I_CALDAY TYPE D.
Hope it may work out.
Regards,
Indu

Function module call with destination

Hi,
how can check if a function module call with destination works or not ?
How can I debug.
What can be the reason if it is not calles
regards
ertas

* to chcek the rfc Destination By pass RFC destination name and Connection Type..
RFC_CHECK_DESTINATION
or
RFC_CHECK_DESTINATION_ID
or
You can use this FM RFC_VERIFY_DESTINATION if your release is greater than 4.6C.
Check this sample code from Craig Cmehil's weblog.
CALL FUNCTION 'RFC_VERIFY_DESTINATION'
EXPORTING
    DESTINATION = TMP
        TIMEOUT = 10
EXCEPTIONS
    INTERNAL_FAILURE           = 1
    TIMEOUT                    = 2
    DEST_COMMUNICATION_FAILURE = 3
    DEST_SYSTEM_FAILURE        = 4
    UPDATE_FAILURE             = 5
    NO_UPDATE_AUTHORITY        = 6
    OTHERS                     = 7.
IF SY-SUBRC EQ '0'.
    "* Do code here
ENDIF.
Prabhu

Remote call function and destination

Hi all @SAPforums,
I used to call remotely a custom function, in a report, from many backends:
CALL FUNCTION ZFOO destination mydest
where mydest is a string containing the name of an RFC destination.
My question is: is there a way, on the destination machine, to get the name/id of the "caller" ?
The question arises from this task: I have to use the caller ID in a WHERE clause of a SELECT statement I have to write in ZFOO. I can - of course - pass the caller ID by adding a new parameter to the function, but this would make necessary a change on the CALL FUNCTION in every backend (quite expensive task, in terms of time). So if it's possible, from the callee, to get the name of the caller, I could just modify the function leaving the calls in every backend as they are.
Thanks in advance

>
Matteo Montalto wrote:
> Hello Wolfgang,
> sorry for the stupid question... what does "destination" stands for?
> Thanks for the help
Hi ,
they are two types of RFC calling is ther..
1......
CALL FUNCTION "function0module-name' DESTINATION "DEST"
--that means you are picking data from another r/3 sytem using detination from 'DEST'..
2....
CALL FUNCTION "function0module-name' IN BACKGROUND TASK DESTINATION "DEST"
--that means you are sending data to another r/3 sytem or any other sytem XI or and EDI
using detination from 'DEST'..
for 1 and 2..
--go to t-code SM59 and see the DEST what type of connection is and what system it is connected..
Regards,
Prabhudas

Call function with arguments in AS3

Hello!
I`m a new in Flex developing, and cannot understand same code
convention, im Java programmer.
How I can write correct function call in ActionScript, my
call: var goodsWnd:CreateGoodsWindow =
PopUpManager.createPopUp(this,
CreateGoodsWindow, true) as CreateGoodsWindow;
I wish call function above with argument, how I do that?
Where my class: public class CreateGoodsWindow extends
extends TitleWindow
public CreateGoodsWindow(data:Object)
}

Use PopUpManager.addPopUp() instead of createPopUp().
addPopUp takes an object that has already been instantiated:
var createGoodsWindow:CreateGoodsWindow = new
CreateGoodsWindow(data);
PopUpManager.addPopUp(createGoodsWindow);

Short Dump on BAPI_TRANSACTION_COMMIT with destination NONE

Hi All
I am using SAP-PM with Compatible Unit(CU) functionality in ECC6 environment.
After we release the CU design to Generate order we get SHORT DUMP.
Any help will be of great help.
I am pasting the details from the dump file here.
Please let me know.
Appretaite your help.
Thanks
Meghana
Runtime Errors         CALL_FUNCTION_REMOTE_ERROR
Date and Time          27.08.2007 18:01:10
Short text
"The current application triggered a termination with a short dump."
What happened?
Error in the ABAP Application Program
The current ABAP program "/***/SAPLCUORDER_N" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "MESSAGE_TYPE_X"
on the called page.
How to correct the error
Please refer to the notes described in the
short dump.
System environment
SAP-Release 700
Application server... "MB1ES1005"
Network address...... "10.191.97.206"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "MB1ES1005"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jul 25 2007 00:57:05"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 121
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 14633136
Heap.... 0
Page.... 131072
MM Used. 5005432
MM Free. 1263944
User and Transaction
Client.............. 200
User................ 10086330
Language key........ "E"
Transaction......... "/***/DESIGN "
Transactions ID..... "409954DC5D77F1C58E2D0013725D3B3B"
Program............. "/***/SAPLCUORDER_N"
Screen.............. "/***/SAPLCUORDER_N 2000"
Screen line......... 34
Information on where terminated
Termination occurred in the ABAP program "/***/SAPLCUORDER_N" - in
"SAVE_DESIGN".
The main program was "/***/SAPLCUORDER_N ".
In the source code you have the termination point in line 594
of the (Include) program "/***/LCUORDER_NF07".
Source Code Extract
Line
SourceCde
564
ENDIF .
565
ENDLOOP .
566
IF l_ret-type = 'E' OR
567
l_ret-type = 'A' .
568
CLEAR: save_okcode .
569
570
Show Messages
571
CALL FUNCTION '/***/N_LOG_ADD_MSG'
572
EXPORTING
573
i_log_type = 'G'
574
TABLES
575
t_ret      = t_ret.
576
PERFORM log_order_create_show .
577
Show first Message
578
     MESSAGE ID l_ret-id TYPE l_ret-type NUMBER l_ret-number
579
     WITH
580
       l_ret-message_v1 l_ret-message_v2
581
       l_ret-message_v3 l_ret-message_v4.
582
CALL FUNCTION '/***/N_DESIGN_INIT' .
583
ELSE .
584
IF g_design_mode = con_mode_crea.
585
Need to update DMS documents with real design number
586
PERFORM document_prepare_002 USING con_desnum_tmp_1
587
lv_desnum.
588
ENDIF.
589
Commit design BAPI's
590
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
591
592
IF save_okcode = con_order.
593
Commit order BAPI's
>>>>>
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
595
DESTINATION 'NONE'.
596
597
call of fct. RFC_CONNECTION_CLOSE is important to get a new
598
initial roll area with initial internal tables next time
599
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
600
EXPORTING
601
destination          = 'NONE'
602
EXCEPTIONS
603
destination_not_open = 1
604
OTHERS               = 2.
605
ENDIF.
606
607
IF lv_desnum IS INITIAL .
608
lv_desnum = /***/cudesign-desnum .
609
ENDIF .
610
SET PARAMETER ID '/***/DESNUM' FIELD lv_desnum .
611
    Changes saved
612
MESSAGE ID '/***/MSG' TYPE 'S' NUMBER '529' WITH lv_desnum .
613
ENDIF .
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
2000
SY-UCOMM
CU01
SY-TITLE
Change Design: 50000109
SY-MSGTY
X
SY-MSGID
00
SY-MSGNO
341
SY-MSGV1
MESSAGE_TYPE_X
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070827
SY-UZEIT
180110
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
4 FORM         /***/SAPLCUORDER_N                  /***/LCUORDER_NF07                    594
SAVE_DESIGN
3 FORM         /***/SAPLCUORDER_N                  /***/LCUORDER_NF07                   2616
CHECK_AND_SAVE_F07
2 FORM         /***/SAPLCUORDER_N                  /***/LCUORDER_NF04                    311
USER_COMMAND_D2000
1 MODULE (PAI) /***/SAPLCUORDER_N                  /***/LCUORDER_NI05                     28
USER_COMMAND_2000
Chosen variables
Name
Val.
No.       4 Ty.          FORM
Name SAVE_DESIGN
%_DUMMY$$
2222
0000
0000
0000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_DESIGN_MODE
R
5
2
0
0
CON_MODE_CREA
I
4
9
0
0
GT_NODE_CUI
Table[initial]
SY-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DESNUM_TMP_1
TM00000001CY
543333333345
4D0000000139
000000000000
000000000000
LV_DESNUM
222222222222
000000000000
000000000000
000000000000
SAVE_OKCODE
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
CON_ORDER
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
SY-XPROG
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DELETE
LVMS
4545222222222222222222222222222222222222222222222222222222222222222222
C6D3000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
No.       3 Ty.          FORM
Name CHECK_AND_SAVE_F07
CL_GUI_ALV_GRID=>MC_MB_VIEW
&MB_VIEW
2445544522222222222222222222222222222222222222222222222222222222222222
6D2F695700000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
GT_OP
Table IT_303[2x1320]
PROGRAM=/***/SAPLCUORDER_NDATA=GT_OP
Table reference: 118
TABH+ 0(20) = 7039FC3C5824DB3C00000000760000002F010000
TABH+ 20(20) = 0200000028050000FFFFFFFF0400000030140000
TABH+ 40( 8) = 08000000C1308001
store        = 0x7039FC3C
ext1         = 0x5824DB3C
shmId        = 0     (0x00000000)
id           = 118   (0x76000000)
label        = 303   (0x2F010000)
fill         = 2     (0x02000000)
leng         = 1320 (0x28050000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000093
occu         = 8     (0x08000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x2010FC3C
pgHook       = 0x00000000
idxPtr       = 0x00000000
shmTabhSet   = 0x00000000
id           = 234   (0xEA000000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 8     (0x08000000)
lineAlloc    = 8     (0x08000000)
shmVersId    = 0     (0x00000000)
shmRefCount = 1     (0x01000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x60B7153D
collHook     = 0x00000000
ext2         = 0x1024DB3C
>>>>> 2nd level extension part <<<<<
tabhBack     = 0xE00FFC3C
delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
G_BADI_PROGRAM
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LOG_ERROR
2
0
0
0
CON_BUTT_DELETED
@11QDelete@
43355466676422222222222222222222222222222222
011C145C545000000000000000000000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
G_CU_EXIT_CU_EXPLODE
F0000000
F0000000
/***/CUDESIGN-OBJNR
CY00000000000000008835
4533333333333333333333
3900000000000000008835
0000000000000000000000
0000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_SEC_COUNT
0
0000
0000
LV_UPD
X
5
8
0
0
%_SPACE
2
0
0
0
GS_ROW_NO
0.0.0.1.
0000
1000
0000
0000
SCREEN
/***/CUDESIGN-GLTRP
2454245445444244555222222222222222222222222222222222222222222222222222222222222222222222222222
F35DF3545397ED7C420000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGID
00
33222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
SWO_%CONTAINER
000000000
2222222222222222222222222222222233333333322222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
0
0
SY-MSGNO
341
333
341
000
000
/***/CVCUI-CUTYP
2
0
0
0
SY-MSGV1
MESSAGE_TYPE_X
44554445555455222222222222222222222222222222222222
D533175F4905F8000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
No.       2 Ty.          FORM
Name USER_COMMAND_D2000
/***/CVCUI
0.0.0.0.0.0.0.1.                                                                         000000
2220000000022222222222222222222222222222222222222222222222222222222222222222222222223333332222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_MODE_COPY
C
4
3
0
0
LT_BAPI_RETURN
Table IT_1778[2x1088]
PROGRAM=/***/SAPLCUORDER_NFORM=USER_COMMAND_D2000DATA=LT_BAPI_RETURN
Table reference: 310
TABH+ 0(20) = 8837083D407E1C3D0000000036010000F2060000
TABH+ 20(20) = 0200000040040000FFFFFFFF04000000F0170000
TABH+ 40( 8) = 08000000C1308101
store        = 0x8837083D
ext1         = 0x407E1C3D
shmId        = 0     (0x00000000)
id           = 310   (0x36010000)
label        = 1778 (0xF2060000)
fill         = 2     (0x02000000)
leng         = 1088 (0x40040000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000113
occu         = 8     (0x08000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
groupCntl    = 0
rfc          = 1
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x50C6073D
pgHook       = 0x00000000
idxPtr       = 0x00000000
shmTabhSet   = 0x00000000
id           = 1534 (0xFE050000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 8     (0x08000000)
lineAlloc    = 8     (0x08000000)
shmVersId    = 0     (0x00000000)
shmRefCount = 1     (0x01000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
collHook     = 0x00000000
ext2         = 0x6067033D
>>>>> 2nd level extension part <<<<<
tabhBack     = 0xE82F063D
delta_head   = 0000000000000000CF000000000000000400000020180000000000004D00430055004F000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
CON_MODE_ORDE
O
4
F
0
0
TGSBT
22222222222222222222222222222222222222
00000000000000000000000000000000000000
00000000000000000000000000000000000000
00000000000000000000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
LS_NUMBERS-AUFNR_NEW
000001000677
333333333333
000001000677
000000000000
000000000000
T024I
200UT10100PG for Term & Comp
33355333335426672567622246672222222222222222
20054101000706F20452D0603FD00000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
LS_T399X
200UT10UM01                  X    INST 30UT01UT01
3335533543322222222222222222252222445522335533553322222222222222222222222222222222222222222222
20054105D01000000000000000000800009E3400305401540100000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CON_VBKZ_U
U
5
5
0
0
/***/CU_ORDER_IO-DISP_FACTOR
2097152
0
0
LS_DESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
/***/CUDESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_DROP_COUNT
0
0000
0000
LS_DESIGN-DESNUM
000050000109
333333333333
000050000109
000000000000
000000000000
No.       1 Ty.          MODULE (PAI)
Name USER_COMMAND_2000
GT_SELTAB_INIT
Table[initial]
Internal notes
The termination was triggered in function "RfcExtendedReceive"
of the SAP kernel, in line 422 of the module
"//bas/700_REL/src/krn/rfc/abrfcrcv.c#4".
The internal operation just processed is "FUNC".
Internal mode was started at 20070827180011.
Status of connection:
RFC state: " "
RFC error text: "RFC_ERROR_SYSTEM_FAILURE"
CPI-C error text: "The current application triggered a termination with a short
dump."
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App       : disp+work.EXE (pid=26488)
When      : 8/27/2007 18:1:10.942
Threads   : 2
Computer Name       : MB1ES1005
User Name           : ec6adm
Number of Processors: 2
Processor Type: x86 Family 15 Model 4 Stepping 10
Windows Version     : 5.2 Current Build: 3790
State Dump for Thread Id 5e10
eax=000f93c0 ebx=0000042c ecx=00003118 edx=00000000 esi=0000042c edi=00000000
eip=7c82ed54 esp=056d71f0 ebp=056d7260 iopl=0         nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3               ret
7c82ed55 8da42400000000   lea     esp,[esp]              ss:056d71f0=7c822124
7c82ed5c 8d642400         lea     esp,[esp]              ss:62bd5803=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
056d7260 77e6ba42 0000042c 0001d4c0 00000000 056d7298 ntdll!KiFastSystemCallRet
056d7274 0109504d 0000042c 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
056d7298 00582118 00582151 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess (ntstcdbg.c (501))
056d729c 00582151 7c38b5c8 7c38b5c8 7c38b5c8 01e9b1b8 disp+work!NTStack (dptstack.c (1367))
056d72b8 00582185 7c38b5c8 00000000 008b7ec8 7c38b5c8 disp+work!CTrcStack2 (dptstack.c (352))
056d72c4 008b7ec8 7c38b5c8 00000000 005f0059 00330030 disp+work!CTrcStack (dptstack.c (182))
056d72e8 008bb39f 00711076 056d8018 056d7be8 00200020 disp+work!rabax_CStackSave [abrabax.c (7063)
056d7b90 009eca8b 020b9e4c 020b9e14 000001a6 5d88acf0 disp+work!ab_rabax (abrabax.c (1243))
056d7bcc 009ed19e 00000003 00711076 00000020 00000000 disp+work!rcv_message (abrfcrcv.c (422))
056d8068 009ed29d 00000003 00000000 00710c47 056d80c0 disp+work!RfcExtendedReceive [abrfcrcv.c (14
056d808c 00714873 00000003 00710c47 056d80c0 00711076 disp+work!ab_rfcreceive (abrfcrcv.c (59))
056d80e4 0071886b 2694a7c8 2694a7cc 2694a7cc 2694a7cc disp+work!jfunc_get (abfunc.c (5103))
056d89f4 007191d0 00000003 000000b4 00000000 05e8b7c0 disp+work!jfunc_nonstandard [abfunc.c (1655)
056dcfb0 006e3e2d 00000003 3ced8f90 00000000 056dd018 disp+work!ab_jfunc (abfunc.c (554))
056dd018 0081cb5e 00000000 3ced8f90 056dd164 3cedb514 disp+work!ab_extri (abextri.c (552))
056dd02c 00897dbd 00000000 3cedae46 005bf4cd 3ceda13c disp+work!ab_xevent (abrunt1.c (281))
056dd038 005bf4cd 3ceda13c 000000ea 3cedae46 00000000 disp+work!ab_dstep (abdynpro.c (492))
056dd164 005c25be 3ced8f90 3ced8f90 056dfc78 00000000 disp+work!dynpmcal (dymainstp.c (2398))
056dd178 005c1def 00000001 3ced8f90 00000003 056dfc78 disp+work!dynppai0 (dymainstp.c (1004))
056dd194 00595e69 3ced8f90 00000001 00000001 00000001 disp+work!dynprctl (dymainstp.c (360))
056dfcec 00490e06 00000004 0049d15f 00000004 01dadd00 disp+work!dynpen00 (dymain.c (1628))
056dfcf4 0049d15f 00000004 01dadd00 00000003 00000002 disp+work!Thdynpen00 (thxxhead.c (4773))
056dfee0 0049d6d6 00000001 00000000 00000000 00430000 disp+work!TskhLoop (thxxhead.c (4455))
056dff00 00421c36 00000000 00000000 7ffde000 056dff60 disp+work!ThStart (thxxhead.c (1173))
056dff14 00401080 00000003 05876980 00000001 00000000 disp+work!DpMain (dpxxdisp.c (1121))
056dff60 01242970 00000003 05876980 05877a10 01cce000 disp+work!nlsui_main (thxxanf.c (82))
056dffc0 77e523e5 00000000 00000000 7ffde000 8967f020 disp+work!wmainCRTStartup (crtexe.c (395))
056dfff0 00000000 0124282d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 61fc
eax=00000000 ebx=00000103 ecx=0587a700 edx=02714360 esi=00000000 edi=00000000
eip=7c82ed54 esp=0799fec0 ebp=0799ff04 iopl=0         nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3               ret
7c82ed55 8da42400000000   lea     esp,[esp]              ss:0799fec0=7c821514
7c82ed5c 8d642400         lea     esp,[esp]              ss:64e9e4d3=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0799ff04 0119030a 000006e0 00000000 00000000 0587a798 ntdll!KiFastSystemCallRet
0799ff84 7c349565 00000000 00000000 00000000 0587a700 disp+work!SigIMsgFunc (signt.c (610))
0799ffb8 77e6608b 0587a700 00000000 00000000 0587a700 MSVCR71!endthreadex
0799ffec 00000000 7c3494f6 0587a700 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
/***/SAPLCUORDER_N
0
10.08.2007
10:12:44
541696
E
1
Typ
/***/CUDESIGN
0
10.08.2007
10:05:19
7168
2
Typ
/***/CU_ORDER_IO
0
10.08.2007
09:53:38
4096
3
Typ
/***/DESTYPE
0
10.08.2007
10:05:21
2048
4
Typ
/***/PRF_ORD
0
10.08.2007
10:05:21
4096
5
Prg
SAPMSSYD
0
04.04.2007
10:28:36
21504
E
6
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
7
Typ
/***/G_CUST
0
10.08.2007
09:53:39
3072
8
Prg
/***/SAPLTABLES
8
10.08.2007
10:13:00
19456
E
9
Typ
/***/G_CHAR
0
10.08.2007
10:05:21
3072
10
Prg
SAPLCTCE
10
09.09.2004
14:18:34
9216
E
11
Typ
CABN
0
18.09.2001
10:02:26
12288
12
Prg
SAPLICON
12
04.04.2007
10:10:28
27648
E
13
Prg
%_CICON
12
07.02.2006
10:40:00
104448
E
14
Typ
ICONT
0
04.04.2007
10:10:08
2048
15
Typ
NRIV
0
02.04.1998
08:14:54
3072
16
Prg
SAPLBSVA
16
04.04.2007
14:47:00
296960
E
17
Typ
/***/CU_ORDER_S_OP_N
0
10.08.2007
09:53:39
14336
18
Prg
CL_GUI_CONTROL================CP
18
28.02.2005
21:03:09
112640
E
19
Prg
%_CCNTL
18
18.02.2005
14:15:08
15360
E
20
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
21
Prg
CL_GUI_OBJECT=================CP
21
05.07.2005
13:10:15
375808
E
22
Prg
CL_GUI_CFW====================CP
22
28.02.2005
21:03:09
172032
E
23
Prg
CL_GUI_PROPS_CONSUMER=========CP
23
18.02.2005
14:15:08
30720
E
24
Prg
SAPLTHFB
24
04.04.2007
13:24:38
390144
E
25
Typ
EUDB
0
06.11.2003
20:28:08
8192
26
Prg
SAPLSFES
26
08.08.2007
16:46:17
259072
E
27
Prg
SAPLSPLUGIN
27
09.09.2004
14:18:36
8192
E
28
Prg
SAPLSTTM

Yes even i find it strange. But there is no syntax error and the fact is that it was working 2 days back. Suddenly it has started giving us this dump.
The code is as follows.
Commit design BAPI's
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
      IF save_okcode = con_order.
Commit order BAPI's
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          DESTINATION 'NONE'.
Here con_order is CU01.
Please let me know if anybody has faced this problem earlier.
Thanks in Advance
Meghana

Computer name in R3 when call function RFC from CRM to R3

Hi all,
i nead the computer name in R3 when I come to R3 from CRM .
In R3 i call function 'TERMINAL_ID_GET' in R3   but I don't retrieve the computer name.
i tried also to call function 'TERMINAL_ID_GET' in destination 'CRM'   but I don't retrieve the computer name.
The code in R3:
CALL FUNCTION 'TERMINAL_ID_GET' DESTINATION 'R3GETCRM'
      EXPORTING
        username             = sy-uname
      IMPORTING
        terminal             = l_terminal_usr41
      EXCEPTIONS
        multiple_terminal_id = 1
        no_terminal_found    = 2
        OTHERS               = 3.
This function works ok when i call her direct from R3 or direct from CRM,
but not give me in R3 the computer name when i came to R3 From CRM.
Thanks for your cooperation.
dany

thats because 'TERMINAL_ID_GET' is not a RFC (check the attributes tab of the FM from SE37)
if you dont find a RFC to do t his you can wrap this FM with a custom RFC and use it.
if you want all the logged on users info (computer name and other info) then you can use THUSRINFO FM which a RFC
Raja

Remote call function troubleshooting

I am trying to connect to a target ECC6.0 system from 46c system using SM59 (remote logon). For some reason it keeps displaying the login screen everytime even though I have specified the user and password details. The login screen shows up evertime with current user id in source system.
Is there any configuration that needs to be done in source or target system so that the user details are passed correctly?

>
Matteo Montalto wrote:
> Hello Wolfgang,
> sorry for the stupid question... what does "destination" stands for?
> Thanks for the help
Hi ,
they are two types of RFC calling is ther..
1......
CALL FUNCTION "function0module-name' DESTINATION "DEST"
--that means you are picking data from another r/3 sytem using detination from 'DEST'..
2....
CALL FUNCTION "function0module-name' IN BACKGROUND TASK DESTINATION "DEST"
--that means you are sending data to another r/3 sytem or any other sytem XI or and EDI
using detination from 'DEST'..
for 1 and 2..
--go to t-code SM59 and see the DEST what type of connection is and what system it is connected..
Regards,
Prabhudas

ABAP Dump when calling Function Module Starting New Task

Hi all. I have a tricky situation now, I am doing a POC on parallel processing.
I am getting an ABAP dump on the following Call Function line which is in class lcl_steer_114numc (See below for full program):
METHOD start.
    CALL FUNCTION 'Z_ZZCLS_STEER_114NUMC'
      STARTING NEW TASK me->id
      CALLING me->finish ON END OF TASK.
ENDMETHOD.                    "start
However I get the following ABAP dump:
Short text
    Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK"
The function module only contains a wait statement to simulate parallel processing. It is strange that it dumps here, because when I change the FM call to another call that has been triggered successfully from other classes, it still produces the same ABAP dump.
The background of the Proof Of Concept is to see if I can get an event to trigger the next process that depends on the outcome of the previous process. Parallel processes are run in the start methods by calling RFC.
<Garbled code removed>
Moderator Message: Please post relevant portions of the code only.
Edited by: Suhas Saha on Jul 17, 2011 1:17 PM

Well, the thing is I did manage to run 3 other Function Modules asynchronously succeesfully prior to that function call, with the same exact function call syntax. Further more, I have tried editing it with your suggestion but I get the exact same dump.
The complete function group can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZmFhNzcwMTgtYzQ0Mi00NzQ4LTg5YTMtNDNlNWUxYTM2NTg3&hl=en_US
The complete program can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4YWJmNjU3ODYtODRmMy00Nzg2LThkNTUtZjNkNDRhZGQ3MTUw&hl=en_US
The complete ST22 dump can be found here:
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZDU1YmFkZDAtOTU5MS00ZTgwLWFlZTktNWZhMDUxMzJlZWNl&hl=en_US
Basically I ST22 gives me the following:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          17.07.2011 05:29:54
|Short text                                                                                |
|    Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK"                 |
|What happened?                                                                                |
|    Error in the ABAP Application Program                                                         |
|                                                                                |
|    The current ABAP program "Z_ZZB1_CLOSE_PERIOD_TEST2" had to be terminated                     |
|     because it has                                                                               |
|    come across a statement that unfortunately cannot be executed.                                |
And it explains it here (but is not helpful / relevant at all) as I ran the program from SE38.
|Error analysis                                                                                |
|    There is probably an error in the program                                                     |
|    "Z_ZZB1_CLOSE_PERIOD_TEST2".                                                                  |
|    The program was probably called in a conversion exit                                          |
|    or in a field exit. These are implemented by                                                  |
|    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or                                 |
|    USER_EXIT_xxxxx_INPUT.                                                                        |
|    Conversion exits are triggered during screen field transports or                              |
|    WRITE statements, field exits during field transports from the                                |
|    screen to the ABAP/4 program.                                                                 |
|    In this connection, the following ABAP/4 statements are not allowed:                          |
|                                                                                |
I hope you try to download the slinkee files and you will notice the call function I performed was no different than the other call function RFC calls that really are working.

Parallel Processing Issue : call function starting new task

Hi
I am using the parallel processing functionality using the call function new task destination in group default Performing on end of task inside a loop ( i am splitting the internal table )
However when i am debugging the code, i am able to see the function module( it opens a new session in debugging ) , and i see that new task is started after the RFC Function module is executed .
How is this parallel processing ? I mean the new task starts after control returns back to main program , after the execution of the RFC FM.
I thought the idea was to have the same FM executing in multi threads. So that time is saved.

Thanks for the answers.
There were too many complications in the 'call function in new task ' option.
So we are trying it with the job submit option. So we are splitting up the data into smaller tables and submiting it with this statement : Submit 'prog' with selection-table 's_sel' via job 'job' and return .
Thanks

Facing issue with tRFC (CALL FUNCTION in BACKGROUND TASK DESTINATION

In transcation CJ20N there is aBADI call ZCL_IM_CL_IM_PROJ_UPDATE in which there is a method
IF_EX_PROJECTDEF_UPDATE~AT_SAVE. My requirement is that when the status of the project is changed and saved then after the SAVE some actions are to be performed (BDC for transcation CJ30 & CJ9FS are to be called).
Since this method is called AT SAVE and i need to call the bdc after the comit (of SAVE) is done. So I have made a RFC FM in which I am calling the bdc. and then calling the FM as
CALL FUNCTION <FM> in BACKGROUND TASK DESTINATION <sy-sysid>.
For the txn. CJ9FS bdc this method is working fine and bdc is called after SAVE but for txn. CJ30, at times,the bdc is not working though if I run the BDC FM seperately using SE37 then its working fine.
Can any body guide me where I am going wrong.

The scenario works fine for me. The issue was unable to create a proper test condition in the RFC.
CALL FUNCTION 'ZMY_RFCASYNC'
   IN BACKGROUND TASK
   EXPORTING...
   TABLES...
   EXCEPTIONS...
Simulated error condition in 'ZMY_RFCASYNC'
and got entry in SM58 by simply making an exception.
Thank you all.

Call function..Destination

Hi Experts,
My requirement is to call a RFC Java function in SAP. The Java function is an encryption function which has 4 parameters (Password, Message, Strength128, Strength256). I need to pass the data for the parameters from SAP to JAVA. With the help of SDN, I tried to call this function in ABAP. A destination named 'INTEGRATION' is created in SM59, with the registered Program ID 'ASEncryptionHelper'. ASEncryptionHelper is the Java function name and the program ID is registered with this name only. The following is the code I wrote in my report
DATA: XPASS TYPE STRING.
XPASS = 'PASS'.
CALL FUNCTION 'ASENCRYPTIONHELPER' DESTINATION 'INTEGRATION'
EXPORTING
    PASSWORD          = XPASS
    MESSAGE             = XML_RESULT
    STRENGTH128       = ' '
    STRENGTH256       = 'X'
I have created a RFC function module in my SAP system with the name ASENCRYPTIONHELPER
FUNCTION ASENCRYPTIONHELPER.
""Local Interface:
*" IMPORTING
*"     VALUE(PASSWORD) TYPE STRING
*"     VALUE(MESSAGE) TYPE STRING
*"     VALUE(STRENGTH128) TYPE BOOLEAN
*"     VALUE(STRENGTH256) TYPE BOOLEAN
ENDFUNCTION.
When I execute the program I get a runtime error "Bean ASENCRYPTIONHELPER not found on host HOSTNAME".
I am not able tofigure out the exact problem.
Also I wanted to know whether the way I am coding is right. Do I need to create a RFC function module in SAP also as I did above?
Does the Uppercase of the function 'ASENCRYPTIONHELPER' matter? In SM59 the program id is mentioned as 'ASEncryptionHelper'.
I tried to change the function name with 'ASEncryptionHelper' in the CALL FUNCTION, but then I get another error, "JCO.Server could not find server function 'ASEncryptionHelper' '. What is wrong? I am confused.
Please guide.
Thanks
Anu.

Hi,
I didn't get your requirement wxatly but you can do as below,
What I am assuming is you have a java batch file at your desktop and you want to encrypt the file through this batch file execution from SAP.
Now to execute the batch file at runtime and to pass data at runtime you can use below function module
W_RFCENCRY = 'C:\Encrypt\enc.exc C:\Encrypt\test.txt'.
W_RFCDEST = 'ZRFC'.
CALL FUNCTION 'RFC_REMOTE_PIPE'
      DESTINATION W_RFCDEST
      EXPORTING
        COMMAND               = W_RFCENCRY
      EXCEPTIONS
        COMMUNICATION_FAILURE = 1
        SYSTEM_FAILURE        = 2
        OTHERS                = 4.
Here ZRFC is the RFC created in SM59 as below
1) select TCP/IP and create ZRFC
in program option type as below C:\RfcSdk\bin\rfcexec.exe
Note: RFCDSK folder is required to execute the batch file at your workstation at path specified as above
2) In activation type select start on front end work station radio button.
Now save the RFC and check the connection, same will be there if RFC SDK folder is available as specified in the program option
In W_RFCENCRY give the inputs that you want to pass with the batch file.
here I have mentioned as 'C:\Encrypt\enc.exc C:\Encrypt\test.txt'. in the program where C:\Encrypt\enc.exc is the path for batch file and C:\Encrypt\test.txt is the path of the file on the work station which is to be encrypted.
Hope this will help you, I think at your end batch file can be different and inputs to be passed in the batch file can also be different.

CALL FUNCTION WITH STARTING NEW TASK

Hi All,
i'm call a function module through
CALL FUNCTION 'Y_WIN' DESTINATION 'rfc_destination' then it's give right result but when i want to call with starting new task then
CALL FUNCTION 'Y_WIN' STARTING NEW TASK 'INFO' DESTINATION 'rfc_destination'
it does nt provide me any data. i have check in debugger call fm is wkging fine so pls clear me why i'm nt geeting result.
pls give ur suggestions,
Anuj

Did you use the PERFORMING <form> ON END OF TASK to get the results back; like in the following sample
          CALL FUNCTION 'SAPWL_STATREC_READ_FILE'
               STARTING NEW TASK taskname
               DESTINATION list-name
               PERFORMING read_outtab ON END OF TASK
               EXPORTING
                    read_start_date   = s_date
                    read_start_time   = '000000'
                    read_end_date     = s_date
                    read_end_time     = '235959'
               EXCEPTIONS " failure when calling RFC
                    communication_failure = 1 MESSAGE msg_text
                    system_failure        = 2 MESSAGE msg_text
                    RESOURCE_FAILURE      = 3.
and
FORM read_outtab USING taskname.
* Receive results back
RECEIVE RESULTS FROM FUNCTION 'SAPWL_STATREC_READ_FILE'
    TABLES
      v2_normal_records = outtab
    EXCEPTIONS " from the called FM
      nodata    = 1.
Regards

Debug a FM call with DESTINATION

Hi,
how it is possible to debug a Function Module
which is called in the BACKEND (with DESTINATION ).
If I set a breakpoint in the backend and call the FM frem outside (SAP SRM)
the debugger doesn't stop there.
Regards
ertas

in se38 goto utilites
settings ->debugging then in the field user give the id by which you are logging in your srm application
Then in se38 wherever you want to put a break point press ctrl shift f9 to set a external breakpoint
Then run your srm application with the same user id
It will stop now
hope it helps
bhanu

Behaviour of CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE'

As per ABAP help documentation, the statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' should create a new main session in same user session.The behaviour is wrong as per documentation.
But current behaviour:
The statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' is creating a new user session.
Any reason?

Hi Prakash,
I'd agree with Suhas, that you're reading the documentation wrong. Here's your quote:
As per ABAP help documentation, the statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' should create a new main session in current user session.
If you look at the help, you can see that it says:
When the destination NONE is used, a new main session is opened for the current user session.
Do you see the difference? Also, note that in this context main session basically means that we're talking about a new external session:
Each task ID defines a separate RFC connection with its own context, meaning that, in the case of repeated function module calls of the same task ID, the global data of the relevant function group can be accessed, if the connection still exists.
In dialog processing, note that the maximum number of six main sessions cannot be exceeded, else an error message is displayed.
If you're still in doubt, check out the online ABAP documentation for [CALL FUNCTION - STARTING NEW TASK|http://help.sap.com/abapdocu_70/en/ABAPCALL_FUNCTION_STARTING.htm]. So I'd say the documentation is in line with the actual behavior.
Cheers, harald

Call function zxyz with destination g_dest.

Similar Messages

Maybe you are looking for