Call Fwd All will not release CCM 4.1(3)sr5d

Once call fwd is set on my phones it can't be release. It use to release without a problem and no changes have been made to system.

Hi Doc,
These docs have some possible scenarios/solutions to this problem;
Unable to Cancel Call Forward All from an IP Phone
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00808170c4.shtml
Cisco CallManager Issues with Call Forward All
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801b3f4b.shtml
Hope this helps!
Rob

Similar Messages

When I click and drag items they will not release. How do I fix this?

When I click and drag items they will not release. How do I fix this?

If third-party software called "Air Display" is installed, remove it according to the developer's instructions, then reboot. Back up all data before making any changes.

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Cartridges will not release

I LOVE my 4180 All-in-One and am very distressed by this problem.
I received a message on-screen that there was a problem with the cartridges. I replaced the black and tri-color cartridges with new ones. Now another message: the tri-color cartridge (22) is not the one intended for this printer.
BUT I NOW REALIZE THAT I INSTALLED THE CARTRIDGES BACKWARDS . . . the black one on the left and the tri-color one on the right.
I want to try to remove and reinstall the cartridges correctly. But THEY WILL NOT RELEASE! I don't want to damage the printer by trying too hard to get them out.
QUESTION: Is there a way to make the cartridges release so I can reinstall them correctly?????
THANKS SO MUCH FOR YOUR HELP!
Ruth Gehres

If you have a spare cartridge you can look and see a small ridge on the top of the cartridge near the front. This is the part that is stuck. Using a dull knife or the handle of a spoon to gently pry the cartridge down a bit should allow the cartridges to release.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Insufficient Authorization old Invoices Will Not Release to Accounting

I have some old invoices that will not release to accounting. Instead of trying to secure a new credit card from the customer how can I remove the credit card information/or trick the order into thinking it doesn't need it so that I can get the open billing documents to the customers open account?
Please any help will be appreciated.
Again the error message is insufficient authorization, need to get these documents released to accounting.

That is true...if it has been partially utilized in another Billing doc, then it wont let delete the lines...
So when this hapenned to me, this is what i did....and maybe this is not the best practice.
I first got a Manual authorization in the sales order. Now generally we get the auth. from a 3rd party application Delego. So when we did the manual auth, we just entered a fake Auth number. This way, we tricked the system to let us post the Invoice to accounts. But definitely it posted to the card receivable account insted of the customer account. Now the settlement of this item would fail because the Auth number is not valid but the settlement fails only after it does the additional G/l posting to post to the Clearing account. To clear off this clearing account posting, we created a credit memo for the same amount and again with a fake Auth so now when this credit is processed for settlement, it also fails but reverses the provious debit...so that all accounts are now all balanced out.
So now remains the customer....so we finally did a Debit memo equal to the original invocie amout and now this posts to the customers account.
I was unable to find any other solution and was skeptical of doing any enhancement or changes just for a single case. Pls also let me know if you come across any better ideas.

When trying to drag a file, system will not release the file. Help!

Since installing an update to OSX Lion whenever I select a file and try to drag it to another location, the fle will not release. I have to reboot. This happens whether I use trackpad or magic mouse. How can I fix this? I do not have any assistive items turned on.

Have you tried repairing permissions?
Go to Applications, then to Utilities, then open Disc Utilities, select the disc that's indented, then select Verify Disc Permissions, and when that has run its course, select Repair Disc Permissions.
Hope that helps.
See also the official info here:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh17.html

I bought the movie Margin Call and it will not down load?

I bought the movie Margin Call and it will not down load?

You should be able to play films on windows computers, if it wasn't compatible with it (e.g. you should have got an error if you tried to buy an HD film on non-HD compatible computer).
The current version of iTunes is 11.4 - you can see if there are any updates available via the Help > Check For Updates menu option.
Or you can download the current version of iTunes from here : http://www.apple.com/itunes/download/
What happens when you try to play the film, and do other videos that you have in your iTunes play ok ?
If you can't get it to play but other videos play ok then contact iTunes Support (these are user-to-user forums) : http://reportaproblem.apple.com

I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

This tech note addresses your problem: iOS: Deactivating iMessage

Two finger click selects text but will not release it.

I have just upgraded from 10.4.10 to 10.4.11 and from Safari 3.0.3 to 3.1.2. A new problem has developed. If I two-finger click on a link in Safari, in order to select 'Open Link in New Tab' or if I two-finger click in a word to bring up the contextual menu the contextual menu comes up as it should. I can select anything in it I choose. The problem is that when I let go of the trackpad the link or the word remains highlighted. This causes me to have to click somewhere else, on blank space for instance, to release the highlighted text or link.
This happens in Safari. It does not happen in Camino. Also, if I bring up a contextual menu in Safari using Control-click the same issue happens. The text or link remains highlighted afterwards.
The biggest nuisance this causes is that as long as a link remains highlighted the mouse arrow remains an arrow rather than turning into a hand and finger when hovering over another link.
Does anyone else hear experience this or has anyone hear heard of it? TIA
Greg

No, I think we are talking about entirely different things. What I am talking about is this...
For instance, I enter search terms in Google, press enter, it brings up a page of links.
I hover my mouse over one of the links and when I do the black mouse arrow turns into a hand with a pointing finger. I two-finger tap that link and select "Open Link in New Tab". It does. All is well.
Now, while still on that Google page I hover my mouse over yet another link.
If I am using Safari 3.0.3 or 3.0.4 that mouse arrow will turn into a hand with finger as soon as it hovers over another link.
If I am using any Safari version newer than 3.0.4 the mouse arrow will not turn into a hand with finger when I hover over another link. The reason is because when I two-finger tapped that first link the text of the link got "selected" i.e. highlighted. The mouse pointer is now locked into black-arrow-pointer-mode unless I tap the trackpad to release it from that mode.
In Safari 3.0.3 or 3.0.4 a two-finger tap on a link would not select the text of the link and therefore the pointer did not have to be released. It would immediately turn into a hand with finger as soon as it hovered over a new link.
So, why does this matter so much too me? It matters because many web pages have links on them that you cannot even tell are links until you hover your mouse over them, at which time the mouse arrow changes to a hand with pointing finger. If I two-finger tap a link to open it in another tab, and then I continue looking on that page for more links to tap, I cannot discover them. My mouse pointer arrow remains a black arrow even though it is hovering over a link. The reason it remains an arrow is because the first link I tapped selected the text that represents that link and my mouse is now not in the correct mode (mood?) to turn into a hand with finger. I can no longer identify links on that page unless I deliberately tap some place on the screen to release the selected text of that earlier link. The mouse pointer will no longer turn into a hand with pointing finger when hovering over a link. It will remain a black arrow until the text representing the previously tapped link has be released, or deselected.
Safari 303 and 304 did not select the text of a link when tapped with two-fingers. The mouse arrow was not being held hostage until it was deliberately released. Safari versions higher than 304 are a considerable nuisance due to this issue. It is very easy to forget to release the previously selected text and therefore it is easy to not even find more links on a page if they are the kind of links that the web author decided to make indistinguishable from the rest of the text in a sentence. Apparently the web author assumes you will suspect it to be a link and then hover your mouse over the text to see if it is a link.

IMac will not release burned CD

I burned several CDs consecutively in my iMac. When I burned the last one, it would not release it. The CD icon no longer shows up on screen. The eject button will not work. How can get it out?

Were you able to restart the computer, and hold the mouse down while it starts?
That is the most common way to try and get a media or system disc to eject if
the other expected way fails to produce results.
Another may be to be sure user permissions are corrected (disk utility> repair
disk permissions) and other basic maintenance is done on a preventative basis;
another idea may be to attempt random voodoo effects on startup, though I do
not know if things - such as resetting the PRAM on startup - could help in this.
If the optical drive has failed, that is another matter. And if nothing else you
can try does work, research this issue further before trying to use a PMU reset.

I was on my phone and after my last call it now will not charge or even respond to any thing???

I was on a call around 7 something to night and after I hung up my phone turned off and now it will not charge or even respond to any thing???? I did not drop it or anything like that??? I have a case around it protecting it too...I took the case off and still no response?

Hi,
See Here for
Device Frozen
http://support.apple.com/kb/ts1445
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I have a 5 month old Magic Mouse and I want to replace the batteries for the first time but the battery door will not release any suggestions?

The battery compartment door on my Magic Mouse appears to be jammed shut and will not open, the device is only 5 months old and this is the first time I have needed to open it to change the batteries. Are there any suggestions?

It could be you are approaching it incorrectly.   It can be a tricky little gadget that actually works with minimal pressure.
Try turning over the mouse so the compartment panel faces you, optical sensor topmost. Then holding the mouse at each side but not on the panel itself, flick the small, black rectangular panel downwards.   The top of the panel should spring out, though it may require you to manipulate it fully away from the mouse.
Once you have replaced the batteries, starting at the bottom reverse the procedure then clip into place.   Remember to move the small switch next to the optical sensor upwards which should turn on the green light.   Then click twice to connect.

My new Adobe Photoshop elements will not let me register. What do i do? Also, the disc will not release from my computer.

I just purchased Adobe Photoshop elements 10. I just installed it. it works, but when I go to register it, it refuses me.
A;lso the Photoshop 10 disc is stuck in my computer. it will not eject.
Please help
Judith.

Photoshop is a program, Adobe is the company that sells it.
Somebody taking your money does not proof you have purchased a legitimate license …
While this may well have nothing to do with your issues you should post on the proper Forum and provide other relevant information (OS, hardware, …).

I just got a call that they will not deliver my washer today. Another terrible experience.

I bought a $1200 Samsung front loader from Best Buy 3 years ago that self destructed a week and a half ago. In spite of being under warranty, repair cost exceed buying new due to uncovered parts and labor. Live and learn. I ordered new from the website to learn that I had to wait almost a week for the first delivery window. I took the day off today so I could be here to receive it and learned only this morning that they will not deliver it, they don't have it, I need to reorder, and no one at Best Buy can help. I have been hung up on 3 times, transferred in circles twice, and told there is nothing that they can do. I am sitting here staring at a pile of dirty laundry and making the commitment to myself that I will not spend another dime at Best Buy (fyi, I typically spend between 3,000 and 5,000 per year there.) A company that treats their customers this way does not deserve to survive.

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

DS 1.3 Charts will not release the selected Item.

Hello all,
I have problem with Design Studio 1.3 we developed a couple of dashboards with DS 1.2. Now we upgraded dashboards to 1.3. We used Chart selection functionality to filter values on other charts etc. We also using dynamic visibility if you click on a chart it filters another chart and disappears and brings a new chart. To go back, we used a button to clear filter and make the first chart visible.
Now, before upgrading after the chart disappeared and clicked on a button to remove the filters, the chart would release the selected item on itself. However, after the upgrade, this won't work because the chart won't release the selected item. It just keeps selecting even after we clear all filters and make it visible.
I have been searching and trying to find a solution for this, but I couldn't come up with some kind of idea. And in scripts and don't see setSelectedItem or setSelectedValue or reset the selection. etc
1. Create a button with the script below: (BUTTON_1) This will clear the filter and make the chart disappear.
DS_2.clearFilter("0PLANT"); //Map DS_2 to another chart
CHART_1.setVisible(false); //Chart using DS_1
2. Create another button with the script below: (BUTTON_2) This will set the chart visible.
CHART_1.setVisible(true);
3. Click CHART_1 and select item.
4. Click BUTTON_1 to clear selected filter.
5. Click BUTTON_2 to make CHART_1 visible again.
One you click the second button it will set the filter back which was clicked in step 3.
Does anyone have idea on this? How could I reset the charts' selection?
Your help will be appreciated it greatly.
Thanks.

Hi,
In Design Studio 1.3 (SP0 & SP1), enhancing functionality was delivered with the new ability of the user to bookmark design studio applications and recall these bookmarks within the application. This resulted in changes to the behaviour of charts wrt selection of chart members....
As I understand this, the issue here is really around chart selection not persisting in Design studio 1.2, while chart selection is persisted in 1.3 release.
In 1.2 release, when the original chart is hidden and made visible again , the chart selection is not present when the chart reappears, and does not need to be cleared. In this case the chart is rerendered in its initial state in the browser (no selection).
In 1.3 release, selection within the chart is now persisted in general, this can be seen when a chart with a selection is hidden and made visible. In this case the chart is rerendered with selected member present in the browser. By clearing this selection within the chart, the user is now firing again the OnSelect event. (This causes the chart to be hidden and data source filtered again).
The scripting attached to the chart just needs to be modifed slightly to cover this scenario. The result of the getSelectedMember() func call needs to be checked to see if a valid selection is returned.
For example :
var temp = CHART_1.getSelectedMember("0BC_TYPE");
if (temp.text != "") {
      DS_1.setFilter("0BC_TYPE", temp);
      CHART_1.setVisible(false);
      CHART_2.setVisible(true);
The addition of an "if" statement in this case (marked in bold above), checks that if a member within the chart is not selected, in this case no value ("") is returned, and the Data src is not filtered/charts are not hidden & shown as before.
So the issue in 1.3 SP1 is in relation to the persistence of the selection within the chart, which when cleared, fires the onSelect event again (resulting in undesired filtering of data src again).
Hopefully the above scripting will resolve this issue for you....
Best regards,
Brian

Call Fwd All will not release CCM 4.1(3)sr5d

Similar Messages

Maybe you are looking for