Call gets disconnected when lock button is pressed.

I use iPhone 6 and upgraded my device to 8.3 today. This happened to me couple of times now, I was in a call without a hands free got a text message , the screen lit up with notification and never got switched off. Now ow when I pressed on a lock button to lock the screen and continue on call , the call got disconnected .
This is very wiered. Any comments on this.?????

Sounds like you have a internal connection problem in the iPod. I would make an appointment at the Genius Bar of a local Apple store.

Similar Messages

IPod Touch turns off when lock button is pressed.

My father accidentally put my dog's cage on top of my iPod Touch...surprisingly it was fine. Or so I thought. A few minutes later the volume started acting strange, which I think was a problem with the button. Somehow I fixed that after playing around with it. But when I pressed the lock button, the iPod turned off, and wouldn't turn back on, as if it had no battery life whatsoever. When I got home, I plugged it in, and thankfully it responded. I thought it was fine, until I tried to press the lock button again. It completely dies every time the button is pressed. Which I suppose is alright, as long as I never press that button again but that's rather annoying. Any ideas on what to do with that?

Sounds like you have a internal connection problem in the iPod. I would make an appointment at the Genius Bar of a local Apple store.

How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ???

Matchcode in OO (call the search help when the button is pressed )

Hi Guys,
I'm using the class cl_dd_document in order to fill a form that contains a input element (cl_dd_input_element) and a button element (cl_dd_button_element).
What I need to do now is to simulate (or build) a matchcode for the button.
For example, the input field is for entering the name of a table, and with the button i want to show all the tables that are elegibles for that field.
Any suggestion?
Regards,
Eric
Message was edited by:
Eric Hernandez Pardo

Hi Uwe,
What I want to know is how to call the search help when the button is pressed. (Like the one in SE80 Transaction)
Regards,
Eric
Message was edited by:
Eric Hernandez Pardo

Unlike IE When back button is pressed it takes too long. pleas do something for that. thnx.

Unlike IE When back button is pressed it takes too long. pleas do something for that. I like firefox and i get to use the back button more often.
thnx

In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

Call gets disconnected after playing the menu from CVP

Hello,
When I make a call, the call is going to the ICM and then it is coming to the Call server then to the VXML gateway and then it goes to the VXML server and plays the promt.
The problem i am facing is that once the menu audio is played the call gets disconnected. It doesnt let me choose any options. I feel it is not able to identify the my inputs
I have some debug outputs
Mar 1 01:09:03.095: //-1/C113522D805A/CCAPI/cc_api_display_ie_subfields:
   cc_api_call_setup_ind_common:
   cisco-username=1000
   ----- ccCallInfo IE subfields -----
   cisco-ani=sip:[email protected]:5060
   cisco-anitype=0
   cisco-aniplan=0
   cisco-anipi=0
   cisco-anisi=1
   dest=sip:[email protected];transport=udp
   cisco-desttype=0
   cisco-destplan=0
   cisco-rdie=FFFFFFFF
   cisco-rdn=
   cisco-rdntype=0
   cisco-rdnplan=0
   cisco-rdnpi=-1
   cisco-rdnsi=-1
   cisco-redirectreason=-1   fwd_final_type =0
   final_redirectNumber =
   hunt_group_timeout =0
*Mar 1 01:09:03.103: //-1/C113522D805A/CCAPI/cc_api_call_setup_ind_common:
   Interface=0x67213130, Call Info(
   Calling Number=sip:[email protected]:5060,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
   Called Number=sip:[email protected];transport=udp(TON=Unknown, NPI=Unknown),
   Calling Translated=FALSE, Subscriber Type Str=Un
R1#known, FinalDestinationFlag=TRUE,
   Incoming Dial-peer=811, Progress Indication=NULL(0), Calling IE Present=TRUE,
   Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=65
*Mar 1 01:09:03.103: //-1/C113522D805A/CCAPI/ccCheckClipClir:
   In: Calling Number=sip:[email protected]:5060(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
*Mar 1 01:09:03.103: //-1/C113522D805A/CCAPI/ccCheckClipClir:
   Out: Calling Number=sip:[email protected]:5060(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
*Mar 1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 1 01:09:03.103: :cc_get_feature_vsa malloc success
*Mar 1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 1 01:09:03.103: cc_get_feature_vsa count is 1
*Mar 1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 1 01:09:03.103: :FEATURE_VSA attributes are: feature_name:0,feature_time:1732532552,feature_id:23
*Mar 1 01:09:03.103: //65/C113522D805A/CCAPI/cc_api_call_setup_ind_common:
   Set Up Event Sent;
   Call Info(Calling Number=(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
   Called Number=(TON=Unknown, NPI=Unknown))
*Mar 1 01:09:03.111: //65/C113522D805A/CCAPI/cc_process_call_setup_ind:
   Event=0x67452800
*Mar 1 01:09:03.119: //65/C113522D805A/CCAPI/ccCallSetContext:
   Context=0x65097114
*Mar 1 01:09:03.119: //65/C113522D805A/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 65 with tag 811 to app "_ManagedAppProcess_bootstrap"
*Mar 1 01:09:03.143: //65/C113522D805A/CCAPI/ccCallProceeding:
   Progress Indication=NULL(0)
*Mar 1 01:09:03.147: //65/C113522D805A/CCAPI/ccCallConnect:
   Progress Indication=NULL(0), Data Bitmask=0x0
*Mar 1 01:09:03.151: //65/C113522D805A/CCAPI/ccCallConnect:
   Call Entry(Connected=TRUE, Responsed=TRUE)
*Mar 1 01:09:03.239: //65/C113522D805A/CCAPI/cc_api_event_indication:
   Event=141, Call Id=65
*Mar 1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_event_indication:
   Event Is Sent To Conferenced SPI(s) Directly
*Mar 1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_caps_ind:
   Destination Interface=0x0, Destination Call Id=-1, Source Call Id=65,
   Caps(Codec=0x0, Fax Rate=0x2, Vad=0x2,
   Modem=0x0, Codec Bytes=20, Signal Type=2)
*Mar 1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_caps_ind:
   Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
   Playout Max=250(ms), Fax Nom=300(ms))
*Mar 1 01:09:04.163: //65/C113522D805A/CCAPI/ccCallHandoff:
   Silent=FALSE, Application=0x6773AB4C, Conference Id=0xFFFFFFFF
*Mar 1 01:09:04.295: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
   Initial Digit Timeout=0(ms), Inter Digit Timeout=0(ms)
*Mar 1 01:09:04.295: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
   Call Entry(Inter Digit Timeout=0(ms), Initial Digit Timeout=0(ms))
*Mar 1 01:09:04.295: //65/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
   (callID=0x41, digit_event=0x1, enable=TRUE, consume=FALSE)
*Mar 1 01:09:04.299: //65/C113522D805A/CCAPI/ccCallReportDigits:
   Enabled=TRUE, Call Id=65
*Mar 1 01:09:04.303: //65/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
   (vdbPtr=0x67213130, callID=0x41, disp=-4, digit_event=0x1, enable=TRUE, consume=FALSE)
*Mar 1 01:09:04.307: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
   Enabled=TRUE, Disposition=0xFFFFFFFC, Interface=0x67213130, Call Id=65
*Mar 1 01:09:04.311: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
   Call Entry(Initial Digit Timeout=0(ms), Inter Digit Timeout=0(ms))
*Mar 1 01:09:05.291: //65/C113522D805A/CCAPI/ccAssociateStream:
   Coder=5, DTMF Relay=4, Vad=0,
   Record Function=0x0, Event Queue=0x66954714, Stream Context=678B0364,
   Record Context=0x0, Stream Call Id=66, Call Id=65
*Mar 1 01:09:05.295: //65/C113522D805A/CCAPI/ccAssociateStream:
   Call Entry(Stream Status=2, Digit Enable=TRUE)
*Mar 1 01:09:05.327: //65/C113522D805A/CCAPI/cc_api_call_associated:
   Interface=0x0, CallId=65, Disposition=0
   Play Function=0x62C2DFA8, Codec=0x5, Vad=0x0
   Media Type=0x3, SPI Context=0x678D2480, Stream CallId=66
   TX Dynamic Pt=0x0, RX Dynamic Pt=0x0
*Mar 1 01:09:05.531: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
   Initial Digit Timeout=5000(ms), Inter Digit Timeout=10000(ms)
*Mar 1 01:09:05.535: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
   Call Entry(Inter Digit Timeout=10000(ms), Initial Digit Timeout=5000(ms))
*Mar 1 01:09:05.535: //65/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
   (callID=0x41, digit_event=0x1, enable=TRUE, consume=FALSE)
*Mar 1 01:09:05.535: //65/C113522D805A/CCAPI/ccCallReportDigits:
   Enabled=TRUE, Call Id=65
*Mar 1 01:09:05.535: //65/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
   (vdbPtr=0x67213130, callID=0x41, disp=-4, digit_event=0x1, enable=TRUE, consume=FALSE)
*Mar 1 01:09:05.539: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
   Enabled=TRUE, Disposition=0xFFFFFFFC, Interface=0x67213130, Call Id=65
*Mar 1 01:09:05.543: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
   Call Entry(Initial Digit Timeout=5000(ms), Inter Digit Timeout=10000(ms))
*Mar 1 01:09:08.723: //65/C113522D805A/CCAPI/ccDisassociateStream:
   Record Context=0x0, Stream Call Id=66, Call Id=65
*Mar 1 01:09:08.723: //65/C113522D805A/CCAPI/ccDisassociateStream:
   Call Entry(Stream Status=1, Digit Enable=TRUE)
*Mar 1 01:09:08.735: //65/C113522D805A/CCAPI/ccAssociateStream:
   Coder=5, DTMF Relay=4, Vad=0,
   Record Function=0x0, Event Queue=0x66954714, Stream Context=678B0364,
   Record Context=0x0, Stream Call Id=66, Call Id=65
*Mar 1 01:09:08.739: //65/C113522D805A/CCAPI/ccAssociateStream:
   Call Entry(Stream Status=2, Digit Enable=TRUE)
*Mar 1 01:09:08.747: //65/C113522D805A/CCAPI/cc_api_call_associated:
   Interface=0x0, CallId=65, Disposition=0
   Play Function=0x62C2DFA8, Codec=0x5, Vad=0x0
   Media Type=0x3, SPI Context=0x678D2480, Stream CallId=66
   TX Dynamic Pt=0x0, RX Dynamic Pt=0x0
R1#
R1#
*Mar 1 01:09:16.143: //65/C113522D805A/CCAPI/ccDisassociateStream:
   Record Context=0x0, Stream Call Id=66, Call Id=65
*Mar 1 01:09:16.143: //65/C113522D805A/CCAPI/ccDisassociateStream:
   Call Entry(Stream Status=1, Digit Enable=TRUE)
*Mar 1 01:09:16.175: //65/C113522D805A/CCAPI/ccCallDisconnect:
   Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
*Mar 1 01:09:16.179: //65/C113522D805A/CCAPI/ccCallDisconnect:
   Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
*Mar 1 01:09:16.227: //65/C113522D805A/CCAPI/cc_api_call_disconnect_done:
R1#Disposition=0, Interface=0x67213130, Tag=0x0, Call Id=65,
   Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
*Mar 1 01:09:16.235: //65/C113522D805A/CCAPI/cc_api_call_disconnect_done:
   Call Disconnect Event Sent
*Mar 1 01:09:16.235: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 1 01:09:16.235: :cc_free_feature_vsa freeing 67445940
*Mar 1 01:09:16.235: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 1 01:09:16.235: vsacount in free is 0
I have some basic VXML gateway configuration
R1#show run
Building configuration...
Current configuration : 2588 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 5
ip cef
no ip domain lookup
ip domain name lab.local
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
multilink bundle-name authenticated
voice service voip
sip
header-passing
application
service cvperror flash:cvperror.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
service new-call flash:bootstrap.vxml
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
service ringtone flash:ringtone.tcl
paramspace english language en
paramspace english index 0
paramspace english location flash
paramspace english prefix en
service ringback flash:ringtone.tcl
service handoff flash:handoff.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
service bootstrap flash:bootstrap.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
archive
log config
hidekeys
interface FastEthernet0/0
ip address 192.168.1.253 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
control-plane
dial-peer voice 9191 voip
service ringtone
session protocol sipv2
incoming called-number 91919191
codec g711ulaw
no vad
dial-peer voice 9292 voip
service cvperror
session protocol sipv2
incoming called-number 92929292
codec g711ulaw
no vad
dial-peer voice 1503 voip
destination-pattern 1503
session protocol sipv2
session target ipv4:192.168.1.57
dtmf-relay rtp-nte h245-alphanumeric h245-signal
codec g711ulaw
ip qos dscp cs3 signaling
no vad
dial-peer voice 100 voip
destination-pattern 10..
session target ipv4:192.168.1.100
dial-peer voice 811 voip
service bootstrap
session protocol sipv2
session target sip-server
incoming called-number 81T
codec g711ulaw
no vad
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
end
Please help me out how o fix this issue/

Thanks for the respose
The microapp what I use is user.microapp.ToExtVXML[]
This is the activity log in the CVP application. I dont see any error logs.
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,newcall,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,ani,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,areacode,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,exchange,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,dnis,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,uui,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,iidigits,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.125,CVP Subdialog Start_01,enter,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.593,CVP Subdialog Start_01,exit,done
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.593,Greetings,enter,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.597,Greetings,interaction,audio_group,initial_audio_group
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.703,Greetings,exit,done
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.703,Menu,enter,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.707,Menu,interaction,audio_group,initial_audio_group
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,Menu,exit,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,how,hangup
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,result,normal
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,duration,1
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,newcall,
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,ani,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,areacode,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,exchange,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,dnis,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,uui,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,iidigits,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,CVP Subdialog Start_01,enter,
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.921,CVP Subdialog Start_01,exit,done
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.921,Greetings,enter,
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.957,Greetings,interaction,audio_group,initial_audio_group
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:07.109,Greetings,exit,done
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:07.109,Menu,enter,
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,how,app_session_complete
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,result,timeout
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,duration,1819
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,newcall,
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,ani,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,areacode,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,exchange,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,dnis,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,uui,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,iidigits,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,CVP Subdialog Start_01,enter,
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.750,CVP Subdialog Start_01,exit,done
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.750,Greetings,enter,
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.782,Greetings,interaction,audio_group,initial_audio_group
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.937,Greetings,exit,done
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.937,Menu,enter,
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,how,app_session_complete
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,result,timeout
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,duration,1829
Thank you

Need help - wifi gets disconnected when it goes to sleep mode - iOS 6, iPhone 5, WPA Enterprise

Hi, I have read a lot of discussions regarding wifi gets disconnected when it goes to sleep mode on iOS 6, mainly on iPhone 5.
Here is my configuration and it just keeps disconnecting wifi connection once it goes to sleep mode
iOS 6
iPhone 5 white
Purchased on Nov 3
Work wifi config: WPA Enterprise
I tried to manual add the wifi but it did not work. I tried all except for upgrade to iOS 6.0.1. I had a call to Apple Support and the guy told me I could not trust everything i read from here (well, how dare he is!!!). But I did all I could think of, and read from here.
I am with ATT and I do not have a receiption at all at work. I have to turn it to airplane mode, and use the wifi connection. I put my iPhone 4 with iOS 5.0 side-by-side to compare. My iPhone with iOS 5.0 DOES NOT disconnect the wifi connection when it goes to sleep mode; but of course, we all know, iPhone 5 with iOS 6.0 does
Any helps would be so much appreaticated. I am considering to return the phone to apple store, and cancel my 2 yrs extended contract with ATT. I might think to get another one once they have the issue fixed. It is no point to have an expensive paper-weight at work while I can't use the celluare nor wifi connection.
Thanks again,

Hi ChrisJ4203
I have tested it at home wifi tonight. My phone and my wife's iphone (both iPhone 5 with iOS 6.0) do the same.
With cellular data on (aka airplane mode OFF) with WIFI ON
Wifi icon replaced by ATT's LTE icon once the phone was waken up from sleep mode; but within 2 secs, the wifi connection got reconnected again.
With cellular data OFF (aka airplane mode ON) with WIFI ON
WIFI icon disappeared from the top bar after both phones were waken up from sleep mode. It took a while to reconnect to the wifi network (more than 10 seconds).
On a separate note, after i rebooted my phone, i can see it does "searching" the ATT's signal, then it shows "No Service", then next second, it shows ATT with full bars and LTE icon.
My question is, i have never noticed the "No Service" showing up from my iPhone 4. The "No Service" shows up on my wife's phone too. When I first got her phone and was doing the installation, I had noticed the cell signal dropped from full bars to no service, then within few seconds, it went back up. I have not had time to test on her phone again, but it is something I will be monitoring for. I wonder if anyone has similar experience like this.
anyhow, any feedback on how to fix the wifi got disconnected while in sleep mode would be very helpful.
thanks,

My iPhone 6 wont come on when home button is pressed and screen pixels out and fades. Any one have fix or same problem?

My iPhone 6 wont come on when home button is pressed and screen pixels out and fades. Any one have fix or same problem?
When I press the home page the screen activates but stays black. I have to press the side button to turn if off then may have to repeat several times to get my phone to come on. Sometimes while using the phone the screen will become pixelly and start to fade away leaving a white screen with vertical line on it. I have to use the close button to make it go away.

If one of the two major buttons of your phone is broken, it is unfair to expect normal operation to be available. The first resolution to any problem involves a usable Home button, as does the second option for resolving any problem. Get your Home button fixed.

Guys I have a iPod Touch 4g with iOs 4.3.3... I want portrait orientation lock button back... I miss it a lot... A dumb mute button shows instead of it... I hate it... Is there anyway I can get d PO lock button back? Any method?? Pleaaaaaaase help me guys

Guys I have a iPod Touch 4g with iOs 4.3.3... I want portrait orientation lock button back... I miss it a lot... A dumb mute button shows instead of it... I hate it... Is there anyway I can get d PO lock button back? Any method?? Pleaaaaaaase help me guys

You can inform Apple of your displeasure:
Apple - iPod touch - Feedback
That is all.

Changing Navigation when cancel button is pressed

Hello All,
We are having custom responsibility for Offer and vacancy creation. New Menu of type(App Pref Menu Container) is created and the required functions and sub menus are attached to it. This was done earlier by someone else. Now when ever i start a transaction (i.e. create offer) and then cancel it, it goes to the custom home page of that responsibility. Now i want to change the navigation page when cancel button is pressed. I believe it was achieved through menu only. Can anyone suggest how?
Thanks and regards,
Pradeep

If a user is halfway ....Look at it this way...Various wizard pages insert rows into various tables. Mark all of them (or some appropriate "master" record) with a "Pending" flag.
Pressing Cancel is nothing special, just like closing your browser window, the Pending data would continue to hang around.
You could set up background jobs that purge pending data older than N days or something if you like.
What I was suggesting was that the "start wizard" button/process should first delete all these Pending rows before starting its real work.

Add a new check box when a button is pressed??

I was trying to add a check box dynamically when a button is pressed.
The check box contains title and a textbox for the user to enter data.
For example , when the user hits addnew button , a new check box (title-name)
with a textbox for entering name should appear on the form.
Please help
thanks

ganeshpuppala wrote:
Hi ,
Thanks for the reply , I want to just do the task in java script.
Can you explain with an example.
thanksSince you are on a Java forum, I can only assume you want to be talked out of using JavaScript. And since you didn't indicate your choice of GUI toolkit, the default assumption is that you want to use Swing. Congratulations! Start here:
[http://java.sun.com/docs/books/tutorial/]

My iphone4 today suddenly froze today I did a lot of tries by pressing the lock button(long press) and pressing home button and lock button together( long press) but it is not starting. It's 7.1.1 and iPhone 4

My iPhone4 suddenly froze today. I did a lto of tries to start it by pressing the lock button(long press) and by pressing the home and lock button together(long press)but it doesn't work. It's an iPhone4 iOS 7.1.1. How to restart it?

Hi there Arpit gaba,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
-Griff W.

Detect when a button is pressed for more than a certain period of time

How do I detect if a button is pressed for more than a certain amount of time? E.g. if you press on the delete button on the dialer and hold it there, it continues to delete. Or if you hold down the .com button for more than a sec, it changes to .net and so forth.
Thanks

Start a timer when the button is pressed. Reset the timer when the button is released. If the timer expires before being reset then you know the button has been held down at least as long as the timer was set for.

Create a validation that runs when a button is pressed

Hi good people from this forum, I was wondering if it's possible to create a validation that runs when a button is pressed.
I'm using Oracle Apex 4.2.2 with Oracle Apex Listener 2.0 and Oracle Database XE 11g
Thank you so much for your time
P.S. On another note, How can I change my display picture =P?

You can create a validation and give it's condition like 'When Button Pressed' and select a button name or select the Condition Type as 'Request=Expression1' and give request(button name) in Expression1.
Thanks
Lakshmi

Call disconnected when lock is pressed

I used to be able to lock my phone (press the top button) when I was talking on it. It was a very nice feature when I wanted to move around and keep the phone in my pocket.
Now... when I press lock, the call disconnects.. I can't put it in my pocket of fear of something being pressed.
Anyone have any ideas how to fix this?
Thanks
Sophie

This happens to me pretty often. Reboot it if it keeps happening, but it will happen again in the future. I don't know if it is a software problem, or maybe we have broken phones. This has been happening all along.

Call gets disconnected when lock button is pressed.

Similar Messages

Maybe you are looking for