Call into an MGCP controlled FXO port not connecting

my setup is
PSTN --- GW --- CUCM --- 6921 phone
when we call from the PSTN then call rings and shows connected on the PSTN phone after about 10 sec the call disconnects with fast busy but the 4 digit plar does not ring at all, outgoing calls are working fine. Need help in resolving this issue
Shabbar

FXO is configured as loop start as below, cannot run the debug isdn
R_SCI_KQ#debug isdn q931
^
% Invalid input detected at '^' marker.
Registration
Registered with Cisco Unified Communications Manager 192.168.0.26
IP Address
192.168.100.6
End-Point Name
AALN/S0/SU0/0@R_SCI_KQ.sciafrica.net
Description
Device Pool
DP_KQ -- Not Selected -- Cisco Unity voice Mail Ports DP_DAR DP_DRC DP_MOZ DP_ZAM UCCX
Common Device Configuration
< None >
Media Resource Group List
MRGL < None >
Packet Capture Mode
None Batch Processing Mode
Packet Capture Duration
Calling Search Space
< None > CSS_AAR CSS_Block-Line-Tz-Restricted CSS_Block-Line-Tz-UnRestricted CSS_CdPTP-HQ-GW CSS_CngPTP-HQ-GW CSS_CngPTP-HQ-Phones CSS_Dial-Device-Tz-PSTN CSS_HQ_Calling CSS_ITSP CSS_PSTN CSS_SAB_Callpark CSS_SUBSCRIBE_HQ_PHONE KQ_CSS LOGISTICS_CSS MANAGERS_CSS MOZ_CSS RECEPTION_CSS SALES_CSS STAFF_CSS TECHNICAL_CSS VMRestrictedCSS
AAR Calling Search Space
< None > CSS_AAR CSS_Block-Line-Tz-Restricted CSS_Block-Line-Tz-UnRestricted CSS_CdPTP-HQ-GW CSS_CngPTP-HQ-GW CSS_CngPTP-HQ-Phones CSS_Dial-Device-Tz-PSTN CSS_HQ_Calling CSS_ITSP CSS_PSTN CSS_SAB_Callpark CSS_SUBSCRIBE_HQ_PHONE KQ_CSS LOGISTICS_CSS MANAGERS_CSS MOZ_CSS RECEPTION_CSS SALES_CSS STAFF_CSS TECHNICAL_CSS VMRestrictedCSS
Location
Hub_None Kenya Mozambique Phantom Shadow Zambia
AAR Group
< None > AAR_GRoup
Network Locale
< None > Argentina Australia Austria Belgium Brazil Canada China Colombia Cyprus Czech Republic Denmark Egypt Finland France Germany Ghana Greece Hong Kong Hungary Iceland India Indonesia Ireland Israel Italy Japan Jordan Kenya Korea Republic Lebanon Luxembourg Malaysia Mexico Nepal Netherlands New Zealand Nigeria Norway Pakistan Panama Peru Philippines Poland Portugal Russian Federation Saudi Arabia Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan Thailand Turkey United Kingdom United States Venezuela Zimbabwe Itu Chile Bulgaria Croatia Romania Serbia and Montenegro United Arab Emirates Oman Kuwait Algeria Bahrain Iraq Mauritania Republic of Montenegro Morocco Qatar Republic of Serbia Sudan Tunisia Vietnam Yemen Lithuania Latvia Estonia
Use Trusted Relay Point
Off On Default
Transmit UTF-8 for Calling Party Name
Called Party Transformation CSS
< None > CSS_AAR CSS_Block-Line-Tz-Restricted CSS_Block-Line-Tz-UnRestricted CSS_CdPTP-HQ-GW CSS_CngPTP-HQ-GW CSS_CngPTP-HQ-Phones CSS_Dial-Device-Tz-PSTN CSS_HQ_Calling CSS_ITSP CSS_PSTN CSS_SAB_Callpark CSS_SUBSCRIBE_HQ_PHONE KQ_CSS LOGISTICS_CSS MANAGERS_CSS MOZ_CSS RECEPTION_CSS SALES_CSS STAFF_CSS TECHNICAL_CSS VMRestrictedCSS
Use Device Pool Called Party Transformation CSS
Enable Caller ID

Similar Messages

Uc560 fxo port not answering incoming calls

Hi,
My customer is facing problem for incoming calls in uc560 fxo port.They have 12 PSTN lines which is connected to UC system.System is configured with Auto-Attendant also. almost all days they are facing this major issue of incoming call is not getting answered by UC560 and caller can hear the line is ringing.While the time of this problem I can see some of the FXO port status LED is UP and not disconnecting even if no one is on call also.Once remove the cable from the FXO port and connect it back the problem will solve for time being.What will be the reason for this issue of line getting held.Is there any configuration needs to change in FXO module? Below is the configuration I done on all 12 FXO ports. Please check and
suggest me a solution.

HI Paolo,
Thank you provoding the proper documentation .
On the system side I made the change by keeping companding type from a-law to u-law and enabled battery reverse.This setting works fine for last three days and now again the customer is facing the same problem of FXO port get held and incoming calls are just ringing and system is not answering even.
How to get proper solution for this issue????
Please help me............
Regards,
Rinchuraj

I forgot my password for my iphone 4s and i cant plus it into itunes it says "itunes could not connect to the Natalie's iPhone because it is locked with a passcode you msut enter your passcode on the iPhone before it can be used with iTunes"

i forgot my password for my iphone 4s and i cant plus it into itunes it says "itunes could not connect to the Natalie's iPhone because it is locked with a passcode you msut enter your passcode on the iPhone before it can be used with iTunes"

iOS: Forgotten passcode or device disabled after entering wrong passcode - http://support.apple.com/kb/ht1212

FXO port not going back onhook when call goes to CUC Voice mail.

HI All,
Quiet new to the voice world and have just set up a home lab and have run into the following problem.
When a call comes in from the PSTN and gets transferred to voicemail CUC, when the caller has left the message and hung up the FXO port on my Cisco 3825 does not go back on hook
If a call comes in from the PSTN and is answered on a phone registered to the CUCM and the internal user hangs up the FXO port goes back on hook but if the caller hangs up the FXO port does not go back on hook.
I am using H.323 between the 3825 & CUCM
PSTN ------->Voice Gateway 3825-------->CUCM-------->CUC
Anyone got any ideas as to why this is happening?
Thanks

Hi Shaun,
The router DSP port is not able to detect the disconnect tone sent by provider that is why FXO port is remaining off hook. When call is answered by IP phone then IP phone user can listen the disconnect tone when PSTN caller disconnectes the call and they will hang up the call so gateway is aware that call is disconnected and moves the port to ON hook state but CUE cannot understand the tone so it keeps the call active. To resolve the issue we ave to configure custom CPTONE. Kindly collect PCM capture for a test call. Disable capture after call is disconnected by PSTN caller. i have attached the document. Use the method according to your IOS version.
Using PCM capture we can findout the exact frequency and cadence of the disconnect tone sent by provider.

Incorrect Caller ID on calls from outside line via FXO port.

   Have a public phone line connected to my CUCME 2801 router VIC2-2FXO card. All inbound calls are passed to DN-5001 (group number). Can receive and send calls without a problem, but incoming calls all show "911" for caller ID. Think this is simply an issue with the out bound dial-peer, of which the lowest numbered out bound dial-peer is for 911 services. Not sure how to correct this so inbound calls show the proper caller ID?
    Below is a copy of my CUCME show run output from the FXO port config thru all the dial-peers. Any pointers is greatly appreciated.
    Thanks.
           Kirk E.
voice-port 0/0/0
connection plar opx immediate 5001
voice-port 0/0/1
voice-port 0/2/0
station-id name POTS
station-id number 7000
voice-port 0/2/1
ccm-manager config
dial-peer voice 7000 pots
destination-pattern 5006
port 0/2/0
dial-peer voice 90 pots
description Emergency Services
destination-pattern 911
port 0/0/0
forward-digits 3
dial-peer voice 91 pots
description 10 Digit local dialing
destination-pattern [234].........
port 0/0/0
forward-digits 10
dial-peer voice 92 pots
description 11 Digit local/long distance dialing
destination-pattern 1[2348].........
port 0/0/0
forward-digits 11
dial-peer voice 93 pots
description Long Distance
destination-pattern 011T
port 0/0/0
prefix 011
dial-peer voice 94 pots
description Backup bench POTS phone
destination-pattern 7000
port 0/2/0
dial-peer voice 2 voip
destination-pattern 51..
session protocol sipv2
session target ipv4:172.16.2.155
dtmf-relay sip-notify
codec g711ulaw
no vad

Hi
Can you find the below:-
Hi
1- Please find the below table as the following link http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b53c7.shtml
Caller ID          Requires VIC-2FXO-M1, VIC-2FXO-M2, VIC-4FXO-M1, VIC2-2FXO, VIC2-4FXO, or MRP3-8FXOM1
under voice-port
caller-id enable
2-If above configure and still have no caller id , please add the below commannds to the voice-port
caller-id alerting line-reversal
cptone ?               "based on your"
caller-id alerting ring 2    "the default is 1" maximum number of rings to be detected before a call is answered over an FXO voice port.
4-Do debug to make sure all ok
"debug vpm signal "
[0/3/0] get_fxo_caller_id:Caller ID received. Message type=128 length=31 checksum=74
Thank you
please rate all useful information

How to check UC560 FXO Port Not Problem Question

Dear All,
We are newbie on Cisco UC560.
Our customer use Cisco UC560, ESW-520-24P and Cisco SPA 502G and 508G for their branch office replace old traditional PBX. Cisco UC560 have built-in VIC2-4FXO and VIC2-4FXS.
Our customer PSTN line connected to UC560 FXO port (1 line PSTN).
We receive report from our customer that they cannot make a call to PSTN and receive call from PSTN that connected to UC560 FXO port (on physical FXO port LED Green turn on). When the problem happen our customer has restart UC560 or shutdown FXO port from CLI.
We have do some test to our customer UC560.
- Moving PSTN line to another FXO port (example: port from 0/1/0 to 0/1/1). The result is same (cannot make call to PSTN and receive call from PSTN)
Today, We have checked on our customer UC560 via show voice port summary and found that port0/1/2 and 0/1/3 OPER status is up wihout cable connected to this port.
Our question:
- What command on UC560 to make sure FXO port on UC560 doesn't have problem?
We attach:
show tech-support voice
show tech-support
We hope you can give us information about this.
Thanks For Your Attention

Hi There,
If you cannot find the Indonesian "Disconnect Supervision" you may get away with using Singapores "Disconnect Supervision" as your carrier networks are similar to each other
Cheers,
David Trad.

Drop DB control, error: Could not connect to SYS, ORA-12541

Hi All,
I am new to Oracle. I am struggling to solve this problem for 2 days, but still couldn't get it done. I post my problem here and wish every guru in this forum to offer some help. Any suggestions are greatly appreciated.
I have Oracle 10.2.0.3.0 installed on GNU/Linux. There are several instances there. The database, listener, sql/plus all work fine. Yesterday, I installed 10g database control on server. The information showed that dbconsole created successfuly. However, I use the produced url (http:// xxx(hostname):1158/em)in my local machine (Win XP) to connect the databse, and the webpage opened. The information showed that EM couldn't be connected to database, and the status of Listener is unavailable, the inforamtion for agent connect.. is: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I googled lots of posts both in this forum and internet and tried to make some changes, but the things get worse. It still didn't work. Even i failed to drop the DB control with the command of emca -config dbcontrol db -repos recreate. the error log information in cfgtoollogs/emca is:
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=svv.X.XXX.net)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCL3))): ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I understand it's the problem related to listener, but i have no idea how to verify it. I put the tns.ora and listener.ora here.
tnsnames.ora:
xxxxx
ORCL3 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.149.210)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL3)
listener.ora
LISTENER =
(ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=10.3.149.210)(PORT=1521)))
SID_LIST_LISTENER=
(SID_DESC=
(GLOBAL_DBNAME=ORCL2)
(SID_NAME=ORCL2)
(ORACLE_HOME=/opt/app/oracle/product/10.2)
(SID_DESC=
(GLOBAL_DBNAME=ORCL3)
(SID_NAME=ORCL3)
(ORACLE_HOME=/opt/app/oracle/product/10.2)
The above is the problem description, any suggestion and help are greatly appreciated.
Thanks,
Kind regards,
Ian

I use the "emca -config dbcontrol db" to config the DB control, but failed. The following is the log information:
This forum doesn't support attch the file. I paste the log file here.
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: TZ set to GMT
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://svv-node2-pub.swlab.net:1158/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
... Stopped.
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface isInView
CONFIG: IN_VIEW marker not instantiated in /opt/app/oracle/product/10.2/sysman/config/emca.properties
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/opt/app/oracle/product/10.2/jlib/emca.jar:/opt/app/oracle/product/10.2/jlib/srvm.jar:/opt/app/oracle/product/10.2/jlib/srvmasm.jar:/opt/app/oracle/product/10.2/jlib/emConfigInstall.jar:/opt/app/oracle/product/10.2/jlib/ldapjclnt10.jar:/opt/app/oracle/product/10.2/jlib/ldap.jar:/opt/app/oracle/product/10.2/jlib/share.jar:/opt/app/oracle/product/10.2/jlib/srvmhas.jar:/opt/app/oracle/product/10.2/jlib/netcfg.jar:/opt/app/oracle/product/10.2/lib/xmlparserv2.jar:/opt/app/oracle/product/10.2/assistants/jlib/assistantsCommon.jar:/opt/app/oracle/product/10.2/sysman/jlib/emCORE.jar:/opt/app/oracle/product/10.2/oui/jlib/OraInstaller.jar:/opt/app/oracle/product/10.2/oui/jlib/OraPrereq.jar:/opt/app/oracle/product/10.2/inventory/prereqs/oui/OraPrereqChecks.jar:/opt/app/oracle/product/10.2/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, EMDROOT=/opt/app/oracle/product/10.2, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=svv-node2-pub.swlab.net, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib:null, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, NLS_LANG=AMERICAN_AMERICA.AL32UTF8, ORACLE_BASE=/opt/app/oracle, ORACLE_HOME=/opt/app/oracle/product/10.2, ORACLE_SID=ORCL3, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/home/oracle/bin:/opt/app/oracle/product/10.2/bin, PERL5LIB=/opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin:, PWD=/opt/app/oracle/product/10.2/bin, QTDIR=/usr/lib/qt-3.3, SHELL=/bin/bash, SHLIB_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, SSH_CLIENT=::ffff:10.3.22.61 4146 22, SSH_CONNECTION=::ffff:10.3.22.61 4146 ::ffff:10.3.149.210 22, SSH_TTY=/dev/pts/4, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/opt/app/oracle/product/10.2/jdk/jre/bin/java]
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/db/sgastop.pl stop ORCL3 svv-node2-pub.swlab.net 1521 /opt/app/oracle/product/10.2
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/db/sgastop.pl stop ORCL3 svv-node2-pub.swlab.net 1521 /opt/app/oracle/product/10.2 completed successfully
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: nmccollector process does not exist
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.DBControlUtil stopNmccollector
CONFIG: Successfully stopped nmc-collector process
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: ORCL3, oracleHome: /opt/app/oracle/product/10.2, and user: SYS
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
     at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:538)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:217)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:133)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
     at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:485)
     at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1141)
     at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:469)
     at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:418)
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_NAME.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_ADDR.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: ORCL3, oracleHome: /opt/app/oracle/product/10.2, and user: SYS
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking mgmt view user account
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: view user sql: declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil /opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of -1
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Arguments passed /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Connecting to database ORCL3 in home /opt/app/oracle/product/10.2 with user "SYS" role "SYSDBA".
connected to database.
sql to execute declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
noOfParams to bind: 1.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Couldn't execute statement: ORA-06550: line 1, column 144:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 144:
PL/SQL: Statement ignored
ORA-06550: line 1, column 470:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 470:
PL/SQL: Statement ignored
ORA-06550: line 1, column 527:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 527:
PL/SQL: Statement ignored (DBD ERROR: error possibly near <*> indicator at char 143 in 'declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := :p1; <*>sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;') at /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl line 108, <STDIN> line 2.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Error executing /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil /opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Failed to unlock mgmt_view account
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/app/oracle/product/10.2/cfgtoollogs/emca/ORCL3/emca_2009-02-12_04-38-34-PM.log for more details.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:253)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:133)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
     at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:485)
     at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1141)
     at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:469)
     at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:418)
Edited by: Ian123 on Feb 12, 2009 2:08 PM

Hands off calling from Macbook pro to iPhone 5 not connecting

I cannot get my iMac to make a phone call using hands off through my iPhone. It continues to tell me they are not connected to the same Wi-Fi, and they are. I got it to work one time the day before after doing a soft reset on my iPhone. What can I do to correct this? All other features are working.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Ethernet port not connected - airport working - not able to get online

Hi, new poster. Never had an issue with our beloved iMac 20 inch Intel Core 2 Duo 2.16 GHz - 2GB 667 MHz DDR2 SDRAM. It's old but it serves us, we hope it's not shot. Power goes out a lot here, system has surge protection but no battery backup. System just goes down without being shutdown properly. We used wired Ethernet. No the problem. Last time power just went out, the system would not boot up. I searched around and found out to use the DVD to verify/repair disk. It finally did and system now boots up. However, it says the Ethernet is not connected. It is. I tried three different cables that worked with our laptop and two different routers, all that happens is the light on the router flashed on and off. While on the network status in sys pref displays no cable detected vs. Cable connected but not connected to internet. Assumed the port was shot. OK, turned on the airport. Connects, gets DHCP assigned IP address and/or accepts static IP but when we launch Safari says it can't connect. Tried Opera browser, same thing. Sophos AV also can't connect for updates. All these network configurations had worked previously until this last power outage. Searched for help, as I don't want to waste peoples time. Found out about these things that follow: SMC RESET - PRAM RESET - Delete connection and recreate same - Network Diagnostics - Hardware Diagnostics - Verify & Repair disk ••• Nothing makes it connect to Internet. Network diagnostics gets to end but will not get connected. Hardware diagnostics regular and extended report no issues. We think the logic board is shot given everything we tried and symptoms with system. Can anyone suggest something we did not try of the things we did listed above? Please help us save this thing from the recycling center. Thanks in advance. Sorry for the long post, wanted to be thorough with what's going on and what we have already tried and done thanks to searching these forums for the last week.

Yikes, sounds like big problems!
Have you blown the dust out lately?

Landline phone calling out rings at destination but does not connect at home

When calling out to someone their phone rings and they hear us but the call does not connect on our end

Sorry to hear about your problem. Is this happening on every phone you use in the house? Cordless or Corded phones? Do you receive incoming calls fine?
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Wired ports not connecting

Have a WRT600N that works fine on both wireless bands, but simply will not connect on any of the 4 wired ports. I've tried 2 different ethernet cables (both confirmed working via the modem), 2 different computers, 2 different OSes. Nothing. LEDs light up on both ends to indicate a gig connection, but adapter can't get an IP. Apadter status always shows zero bytes received (on BOTH computers). Weird thing is, it WILL get an IP if a machien is conencted via wire AND wireless; I assume the IP is somehow being assigned by conencting through the wireless link, as the wired adapter still shows zero B received.
I've done multiple resets to no avail. I've read all the troubleshooting tips and other posts indicating similar problems. I've hit a wall and suspect that the router is physically hooped.
Anybody know something worth trying before I am force to buy a new one?

The reason why I'm asking you to disable the wireless is to avoid conflict while we troubleshoot your wired connection. If the wireless adapter obtains an IP from the router first, the wired connection might have trouble getting an IP from the router. This is for isolation purposes only.
If you want an easier path, upgrade your router's firmware. If you already did that, try re-flashing it.

Parental Controls - Browsers can not connect to server.

Hi,
When using a Parental controlled account, the user can not connect to any server when using a web browser. Tried repairing permissions, safe mode, root admin an created new parental controlled account and same results. Tried converting account to standard account and browsers will connect, but when account is converted back to parental controlled the problem returns.
Is there a way to delete the parental controls preference file and where is it located?
Using an iMac iSight 10.5.5
Any help is greatly appreciated.
Tsofa

You want to post in the Leopard 10.5 forum area:
http://discussions.apple.com/category.jspa?categoryID=235
This is the Tiger 10.4 forum.

Ethernet port not connected

Hello,
Since a couple of hours, my Ethernet interface (through a Thunderbolt or USB connector) remains "not connected".
I couldn't find a clear answer to this problem ... Any idea ?

Try resetting the SMC and PRAM.
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/PH14222

Some controls in container not connected automatically

Does anybody know why teststand is unable to automatically connect some components of a container?
Take a look at the attached image: in station configuration, some fields like ProberPort get connected automatically, but some others, like WetTestHardwareDAQID_1, do not get connected. If you look at the parameters, you will see that both containers (the container in TestStand and the cluster output of the VI) are similar. So, why the ??? <Unknown Value>.
Message Edited by S G on 12-09-2008 09:16 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Solved!
Go to Solution.
Attachments:
teststandproblem.JPG ‏137 KB

S G
You get the message because a mapping between the subproperties of the parameter and the cluster elements is not found. To verify this, go to the type definition of StationConfiguration variable. In the type definition, right-click and select Properties from the context menu. Select the Cluster Passing tab. In the Property combo box, select the WetTestHardwareDAQID_1 and see what is the value of the control "Cluster Item Label". If it is empty, then there is no mapping specified. Do the same for WetTestHardwareDAQID_2. To add a mapping, just enter the cluster element label that you want the property to map to.
One possible reason for the control "Cluster Item Label" to be empty is that the someone did a type change on those subproperties. Notice that the type column has a button to change the type of the subproperties. If you click on the button and select a new type, the cluster passing information is lost. This is something we are aware of and will be fixed in a future release of TestStand.

Air port not connecting

I have a linksys wireless internet connector for three macbooks. the first two connect well but when i try to connect to the wifi, an ! symbol appears. the internet worked before on this computer

On the affect Mac reset the Airport connections. First turn off the Airport card then open System Preferences->Network pane . In there delete your Airport icon and don't panic because if you follow the directions it will be back. Then you must reboot your Mac immediately after deleting the Airport card.
Upon the reboot do nothing else but go back in System Preferences->Network pane. In there hit the + button and add the Airport connection again. Don't try to use the Airport card yet!Then you must reboot again!
After this last reboot do the Reset Pram procedure! Then at last you can go into the System Preferences->Network pane and then move the Airport icon to the top of the left hand pane. Then in the Airport card pane turn the Airport card on and configure it for you wireless network.
Hopefully doing this procedure will help reset your Airport card. Please report back if this helps or not, Good Luck.

Call into an MGCP controlled FXO port not connecting

Similar Messages

Maybe you are looking for