Call list synchronization with Dialer

Hi
is there possibility that when agent reschedules call in ICWin the call will be sent to Dialer the same moment (call will be rescheduled to the same call list)?
is there some tool to synchronize
except tool that only sends call list after activating to Dialer?
Regards
Radek

Hi Vivek,
you say this is not possible in standard?(i think only sending call list to CTI after Activating call list is possible)
using the same function modules that send call list to dialer and
launch them after Rescheduler component was launched (and rescheduled call)
is possible?
but it needs programmer to do it.
If you now some/any things that does not allow to do it, please write.
Regards
Radek

Similar Messages

  • Call list generation with Target group ( 5 k ) records

    Hello Experts,
    While generating call list for the target group which consists of 5 k records , system is generating call list for few records and leaving the remaining. Is there set process as this no of records to be in target group while generating call list ?? .
    Thanks & Regards
      Praneeth Chandra

    Hello All,
    Issue fixed by running calling list in background rather than foreground.
    Thanks
    Praneeth Chandra

  • Integration of Interactive Script to Call List

    Dear Experts,
    I have assigned an Interactive Script to a call list
    Via Outbound dialer the call was placed
    BP was automatically confirmed when the call was answered
    but the assigned script was never launched
    also when i click on the Scripts Work Center only the initial screen was shown where all the available scripts are shown in the dropdown
    I was expecting that the script will be automatically launched once the call is placed and BP is confirmed
    can any one throw some light on it
    Regards,
    Raj

    Easiest method to achieve this is as follows.
    Create the Campaign.
    Select the communication medium as Call.
    Select the interactive script which is visible field after you select the comm medium.
    Assign the target group in campaign and execute.
    It will create the call list with the script.

  • Z3 Compact calls list and sms loading slowly

    Hi I have a Z3 compact D5803 that I have updated to 5.0.2.  Ever since then when i open the dialer (phone) it takes a few minutes to load all the recent call list and the dialer is unresponsive. The same happens when opening the sms messages.  I have done a reset and reinstall and waited 7 days and the delays still persist. Any ideas what I can do?

    Do you have a LOT of sms? or call logs?  Back up all your SMS, MMS and Call logs, perhaps sync them with google (check the link bellow) and then empty the messaging app > restart the phone   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355 

  • Call List and Creation of a Complaint as a follow-up document

    Hi Experts,
    I have a basic question in reference to the Call List Functionality of SAP CRM 7.0. We have to generate a list to measure the satisfaction of our customers. In this cases it is possible that the customer is very unsatisfied with the provided service and wants to open a complaint. Now my question is, if it is possible to open a complaint in the form of a follow-up document of the call list (so that the data of the customer is directly copied from the call list to the complaint - I am talking about data like Business Partner ID, etc.).
    Is that possible? What is the customizing I have to do to make this possible? What are the basic steps?
    Best Regards
    Oliver

    Hi Oliver,
    Don't know if I understand correctly the question, but if it helps, here's my opinion.
    Normally, we create every call of a call list associated with a document...  a contact/interaction record.
    So, for your scenario, I would try to create 'complaint' as follow-up document of that contact.
    Then the agent makes the call and:
    - If the customer don't answer or don't want to complaint, just close the contact with the respective reason
    - If want to answer and have a complaint, the agent create a follow-up document of complaint type, and fill with the respective information.
    Hope that helps you a little more.
    Kind regards,
    Garcia

  • CRM Genesys (G+ 7.5) addional fields during synchronization of call list.

    Hello.
    I have the requirement of sending additional fields to Genesys (G+ 7.5) during synchronization of call list.
    Do you know if it is possible? I have searched for any documentation or similar topic and I haven't found any document.
    Thank you in advanced.
    JM

    it can be done with the help of a system code 'sy-xcode'. it is initialised the time list is sorted so just keeping a check point, we can solve this problem.
    Vishu Khandelwal

  • Nokia E65 to synchronize the call list

    hello everybody,
    I don't know if this the right site but I ask anyway.
    I have Nokia E65 and in my car I have Parrot LS3200.
    the call list doesn't synchronize with the handsfree.
    Can I install a program that synchronize the call list? Somebody tell me that the E/N series doesn't synchronize because the symbian. this is true? I can fix it with a program or I need to live with this bug?
    by the way, the contact, I find in this site a program that synchronize with the handsfree.
    thank for all the answers.

    Object Push:
    ** On the Carkit go to Settings/Contacts Management/Receive Contacts
    * To send one contact from the phone:
    * Select MENU/ CONTACTS
    * Select the contact you want to send
    * Select OPTIONS/ SEND/ VIA BLUETOOTH/ MORE DEVICES
    * The phone is searching for available devices
    * Select the CK3200LS from the list, that will start the transfer
    * To send the entire phonebook from the phone:
    * Select MENU/ CONTACTS
    * Select a contact you want to send
    * Select OPTIONS/ MARK/UNMARK/ MARK ALL
    * Select OPTIONS/ SEND/ VIA BLUETOOTH/ MORE DEVICES
    * The phone is searching for available devices
    * Select the CK3200LS from the list, that will start the transfer
    Hope this helps

  • Adding caller with name and number from call list to the contact list only inserts the number and not the name

    I recently bought a BlackBerry Z10 and moved my cell service to Rogers to take advantage of the name display service offered by Rogers (Fido also offers this service).
    Due to the number of calls that I receive from first time clients, I wanted the name display service to help me know who was calling. Evidently it is impossible to add clients to my contact list before they call me so I'm constantly seeing numbers that have no name to help me decide if I want to answer the call.
    When I try to add a caller from my call list to my contact list, only the number gets inserted in the new contact. The name needs to be entered manually.
    I understand and realize that not all call display formats are the same and that it's virtually impossible to parse the first and last names from the name portion of the caller id.
    However, I would like to see BlackBerry add the functionality to insert the name portion of the call entry from the caller list to a "Nickname" entry in the contact list just like it adds the number to a "Home", "Mobile", or "Work" entry in the contact list.
    If a user doesn't have a name display service, there would be no change to how their contacts are added because there is no name variable to copy over.
    Can someone from BlackBerry please let me know if this feature can be added to BB10 and when it can be added? For me it's an obvious feature that should just work.
    I am really enjoying my Z10 but I'm feeling let down that something so logical and helpful is not supported out of the box.
    Regards,
    Marc

    Hey ViciousFerret,
    It appears that you are not aware of the fact that both Rogers and Fido offer name AND number display service (although the name display feature is an add-on service) and have been offering it for many years (since 2006). Here is a link to the name display service description of each provider...
    http://www.fido.ca/web/content/manageyourcalls/calldisplay&lang=en
    http://www.rogers.com/business/on/en/smallbusiness/products/wireless/addons/valuepacks/
    As you can see from the link below, Rogers and Fido have been offering this service since 2006.
    http://www.businesswire.com/news/home/20060914005951/en/Teams-HP-Rogers-Wireless-Fido-Succeed-North
    My BlackBerry Z10 shows both the name and number when someone calls (and the caller is not in my contact list).
    All I would like is for the Z10 (and Q10) to support the addition of the name and number from the caller list to my contact list without me having to type the name. As I mentioned in my original post, to avoid the OS having to parse the first name and last name from the name portion of the caller list entry the name could simply be added to the contact list as a "Nickname". If your provider only has number display, nothing would have to be copied from the name variable in the caller list to the contact list.
    I find it difficult to believe that BlackBerry would not be aware of this name display service since it's been around since 2006 with both Rogers and Fido.
    I hope I have clarified the reasons why I would like to have this feature added to BB10 and how it's surprising that this simple feature is not already a part of the BB10 OS.
    Either way, I don't think this is a difficult feature for the BlackBerry team to add. They're just copying a 2nd variable from the caller list to the contact list.
    I'm surprised that Rogers hasn't asked BlackBerry to add this feature to their phones. I think it would be a popular feature for those who receive a high number of calls from first time callers.
    How can I get this feature request to BlackBerry for their consideration?
    Cheers,
    Marc

  • Call an other dynpro after list-process. with a button in the functionmenu

    Hi expert-forum-members
    in my report I start a DynPro after the starting-point "start-of-selection":
    START-OF-SELECTION.
    CALL SCREEN 100.
    In the screen 100, I want to show a simple list like that:
    module pbo_0100 output.
      SET PF-STATUS 'SCREEN_100'.
      LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
      PERFORM lief_lfa1.
      PERFORM kunden_kna1.
      LEAVE SCREEN.
    endmodule.   
    In the "PF-STATUS" I defined a button which should call another dynpro with a ALV-List. But when I am debugging the "list-processing" screen I could not catch any sy-ucomm event?!?
    If I comment the two commands ("LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.","LEAVE SCREEN.  LEAVE SCREEN.") out, then the buttonfunction is correct.
    So how can I use a button by using the "LEAVE TO LIST-PROCESSING " command?
    Regards,
    Steffen

    Hi Steffen,
      The logic:
      LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
      PERFORM lief_lfa1.
      PERFORM kunden_kna1.
      LEAVE SCREEN.
    shold be inside a PAI module an not PBO module.
    pai.
    module user_command_0100.
    in program:
    module user_comman_0100.
    case sy-ucomm.
    when '<Fcode for the button>'.
      LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
      PERFORM lief_lfa1.
      PERFORM kunden_kna1.
      LEAVE SCREEN.
    endcase.
    endmodule.
    Regards,
    Ravi

  • National do-not-call-list with UCCX

    Hi,
    Is it possible to program the UCCX to block automatically number appears in a "do not call list" from the contact campaign list ?  I have found some way do to that with ICM but not with UCCX.
    Thanks,

    No, the documentation specifically states, that you need to do this before uploading the contacts.

  • 1280 dial call list empty and 2 strange sign ???

    1280 dial call list empty and 2 strange sign ???
    Already Tried
    full flash
    full reset
    write pm
    self test
    any solution plz
    also tell me about these 2 sign
    Attachments:
    1280unknownsign.png ‏162 KB
    dialempty.png ‏151 KB

    The second sign is of headset connected. If it is present without any headset connected then contact Nokia Care. The first sign is not that clear. Is it a lock? Also sice when is the dialled number shown as empty? If its recent you will have to contact Nokia care as you've done all that can be done by a user.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Problems with Partner determination in activities generated from call list

    In our scenario we are using IC Win Client 5.0.
    During the generation of the call list it to my understanding that when a call is scheduled for a Business Partner a corresponding activity is created and linked to the call. It is in this process that the partner determination procedure for the linked activity kicks in and should determine the BP from the sceduled call and fill the field 'Sold-to-Party' in the activity.
    However this is not working!! I have tested basically all of the standard access sequences for the partner determination procedure and I haven't been able to do it.
    By using standard access sequence 0019 I was able to determine the BP using the relationship, however when opening the generated activity an error ocurrs that  states the following message: 'Only one partner function of function category Sold-to-Party is allowed'.
    Whats really odd is that if we erase the Sold-to-party field leaving it blank and press enter, the contact person is filled in the same field! It seems like something is missing in the procedure or the way I use the access sequence.
    Please help!
    Thanks in advance,
    Pedro

    Pedro
    For activities you should not determine SoldToParties, but rather Activity Partners. Please have a look at the standard partner schemes for activities, to see which partner functions are usually used for activities besides the activity partner.
    If you have to use soldtoparty partner functions, please take into account that they have special checks enabled.
    The system fills in the organization instead of the contact person, esp. if no contact person exists: In R/3 you can have non-reflexive partner functions, but in CRM these are not saved. Instead in partner determination if no target can be found the origined partner itself is used as a result. That is why the organization is put into the result instead of the contact person.
    HTH - Kai

  • Call of Duty with i915GM loki installer, not starting

    Hey,
    I just installed Call of Duty with the loki installer from liflg.org.
    But when i tried to run i get this error
    COD 1.3 build win-x86 Mar 2 2004
    ----- FS_Startup -----
    Current language: english
    Current search path:
    Z:\home\jordz\Games\CoD\main\pakb.pk3 (60 files)
    Z:\home\jordz\Games\CoD\main\paka.pk3 (41 files)
    Z:\home\jordz\Games\CoD\main\pak9.pk3 (149 files)
    Z:\home\jordz\Games\CoD\main\pak8.pk3 (235 files)
    Z:\home\jordz\Games\CoD\main\pak6.pk3 (3 files)
    Z:\home\jordz\Games\CoD\main\pak5.pk3 (4858 files)
    Z:\home\jordz\Games\CoD\main\pak4.pk3 (1668 files)
    Z:\home\jordz\Games\CoD\main\pak3.pk3 (1992 files)
    Z:\home\jordz\Games\CoD\main\pak2.pk3 (694 files)
    Z:\home\jordz\Games\CoD\main\pak1.pk3 (2642 files)
    Z:\home\jordz\Games\CoD\main\pak0.pk3 (12816 files)
    Z:\home\jordz\Games\CoD/main
    Z:\home\jordz\Games\CoD\main\localized_english_pak5.pk3 (46 files)
    localized assets pak file for english
    Z:\home\jordz\Games\CoD\main\localized_english_pak3.pk3 (7 files)
    localized assets pak file for english
    Z:\home\jordz\Games\CoD\main\localized_english_pak2.pk3 (9 files)
    localized assets pak file for english
    Z:\home\jordz\Games\CoD\main\localized_english_pak1.pk3 (3736 files)
    localized assets pak file for english
    Z:\home\jordz\Games\CoD\main\localized_english_pak0.pk3 (1204 files)
    localized assets pak file for english
    File Handles:
    30160 files in pk3 files
    execing default.cfg
    couldn't exec language.cfg
    couldn't exec config.cfg
    couldn't exec autoexec.cfg
    ========= autoconfigure
    configure.csv: using configuration 800 cpu MHz 256 sys MB 64 vid MB
    execing configure.cfg
    fs_basepath is write protected.
    fs_homepath is write protected.
    Hunk_Clear: reset the hunk ok
    ...detecting CPU, found Intel Pentium III
    Measured CPU speed is 0.87 GHz
    System memory is 472 MB (capped at 1 GB)
    Video card memory is 64 MB
    Streaming SIMD Extensions (SSE) supported
    ----- Client Initialization -----
    ----- Initializing Renderer ----
    ----- Client Initialization Complete -----
    ----- R_Init -----
    Initializing OpenGL subsystem
    ...initializing QGL
    ...calling LoadLibrary( 'c:\windows\system32\opengl32.dll' ): succeeded
    ...setting mode 4: 800 600 FS
    ...using colorbits of 32
    ...calling CDS: ok
    ...registered window class
    ...created window@0,0 (800x600)
    Initializing OpenGL driver
    ...getting DC: succeeded
    ...GLW_ChoosePFD( 32, 24, 8 )
    ...0 PFDs found
    ...hardware acceleration found
    ...PIXELFORMAT 1 selected
    ...creating GL context: succeeded
    ...making context current: succeeded
    Initializing OpenGL extensions
    GL_VENDOR: Tungsten Graphics, Inc
    GL_RENDERER: Mesa DRI Intel(R) 915GM 20061017 x86/MMX/SSE2
    GL_VERSION: 1.3 Mesa 6.5.2
    GL_EXTENSIONS: GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_point_parameters GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_cull_vertex GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_3DFX_texture_compression_FXT1 GL_APPLE_client_storage GL_APPLE_packed_pixels GL_ATI_blend_equation_separate GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_INGR_blend_func_separate GL_MESA_pack_invert GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_NV_vertex_program GL_NV_vertex_program1_1 GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SUN_multi_draw_arrays
    ----- CL_Shutdown -----
    RE_Shutdown( 1 )
    Shutting down OpenGL subsystem
    ...wglMakeCurrent( NULL, NULL ): success
    ...deleting GL context: success
    ...releasing DC: success
    ...destroying window
    ...resetting display
    ...shutting down QGL
    ...unloading OpenGL DLL
    Hunk_Clear: reset the hunk ok
    Your video card appears to be missing one or more features required to run Call of Duty.
    You should install the latest drivers for your video card, being sure to uninstall the old drivers first. If you already have the latest drivers, you should completely uninstall the drivers and then reinstall them. This fixes most problems. If the game still doesn't work, it may be that your video card does not have the minimum features required. Please check the readme for more information, including a list of supported video cards.
    But i got direct rending and i tried to install the mesa-git and libgl-dri-git packages from AUR, but that didn't help.
    Can somebody push me in the right direction?
    Thanks
    Edit:
    I get this output when running codsp:
    fixme:d3d:IWineD3DDeviceImpl_GetAvailableTextureMem (0x166100) : stub, simulating 64MB for now, returning 64MB left
    fixme:ddraw:IDirectDrawImpl_SetCooperativeLevel (0x165328)->((nil),00000008)
    fixme:d3d:IWineD3DStateBlockImpl_Release Releasing primary stateblock
    fixme:keyboard:RegisterHotKey ((nil),0,0x00000001,9): stub
    fixme:keyboard:UnregisterHotKey ((nil),0): stub
    Last edited by jordz (2007-04-11 21:48:47)

    When he installed the new fibre hub, did he use his laptop to take settings off old white hub and put it on new one?... way to check is dial into the hub ( 192.168.1.254 ) go to setting and then wireless, and see if the hub name and key are the same that is printed on card and back of hub....as this could be your problem...one thing to try is set the new hub back to default ( you will have to reconnect anything that uses wireless ) and see if this sorts it out.

  • Call List in IC Web Client

    Hello All,
    I have successfully created a call list and am able to call people from the call list in IC Web Client.
    When I click the "Full View" link on the top right corner of the screen, I see a table with the following fields: No, Name, Calling Times, Telephone, Attempts and Call Result.
    After selecting the person to call, when I click on Dial button, it takes me to "Interaction Record". I fill the values there and save it successfully. Now when I come to the Call List again, the "Attempts" and "Call Result" columns show '0' and ' ' respectively.
    When I have successfully called a person, why is the Attempts column not getting updated and why is the Call Result column empty. Also what values should have ideally gone to the Call Result column.
    Your help would be greatly appreciated and rewarded.
    Regards,
    Khushboo

    Hi Carl,
    Thanks for your inputs.
    To simulate a call:
    1.) Configure Contact Center Simulator. (Refer C78 CRM Interaction Center Web Client )
    2.) Launch the Contact Center Simulator page
    3.) Click on the Information Link under the Telephony head, with information from here you will be able to launch an inbound call to a CIC Agent.
    Hope it helps.
    Regards,
    Khushboo

  • Automatic Partner Confirmation in Call List Management

    Hi guys,
    There are two possible ways to deal with Call Lists and the confirmation of accounts that are in this Call List. One is that after selecting the account and ending the call, the account will be removed from the call list. The other is, that the account will not be removed, this is done by call list profile NO_AUTO_PARTNER_CONFIRMATION.
    We are using profile NO_AUTO_PARTNER_CONFIRMATION now because it can happen that an employee selects an account from the call list without calling at all. The problem is that even those accounts stay in the list that have been completed, Interaction Record for their planned call gets status completed. This way it is impossible to get an overview of the real status of the call list.
    We are looking for a solution to remove the account from the call list once the status is complete.
    Looking forward to any hints and help
    Thanks
    Nicole Lange

    Hi Nuno,
    it seems like this is going into the right direction! I copied the confirmation profile, selected both fields and assigned it to the role.
    I also went to Business Transaction Synchronization > Define Call State Mapping Profile and made the following settings:
    1. Call State Mapping: Call State "Complete" and User status "E0003"
    2. Alternative Statuses: Call State "Complete" and User status "E0007", alternative Status CANC
    3. Status Mapping: User Status "Complete" and Status mapping "completed".
    Unfortunately, the system behaviour has not changed. So when I set an Interaction Record to complete and end the call (all is being done manually by the way) the call will not be removed from the call list. Also, the percentage of progress does not change.
    When I unflag the field "No-auto completion" all calls will be removed from the list once I selected one. No matter if I set the Interaction Record to complete or not.
    I found out that in order to synchronise from transaction to call list an action profile is needed. So I used action profile CALL_LIST_SYNCHRONIZATION and added it to the transaction. However, still the same problem.
    Any config that I am missing?
    Thanks
    Nicole
    Edited by: Nicole Patrizia Lange on May 15, 2011 1:49 AM

Maybe you are looking for