Call log entry deleting shows error "invalid selec...

there are three entries in my nokia c3 call log when i delet them the error comes "invalid selection". i had cleared all logs but they still exists. i had reset my phone but still these entries exists in my call log. how can i delet these entries from my call log. and these contact entries are now not in my contact list. but there name exist in my call log without their number and date and call duration.

I get the same message with various JRE versions (1.3.1 Blackdown, 1.3.1 Oracle, 1.1.8 Oracle).
DBCA seems to die in line 124 (with the progress bar at 19%) where it uses oracle.sysman.assistants.dbca -> maybe this one is corrupt or wrong/outdated. Maybe it would be possible to save the database generation script (like in 8.x) as a batch and then run it manually without using Java-based tools. But: where do I generate this batchfile - dbca only seems to save a XML configuration file.
Thanks for any hints. Michael At least for the lat part of my question I found an answer: the option for writing a script with the DB geneation statements is not available for the 'General Purpose' DB. When selecting 'New database' it seems to work fine.
Michael

Similar Messages

E 72 Call logs getting deleted automatically

Hi,
I am using e72 since 1 month. My phone call logs gets deleted automatically as the day starts. I have set the call log duration to 30 days. My phone software version is 031.023 date31/03/2010. Please provide the solution

I'm in a huge problem... My E72 is set to log 30 days but it only logs 1000 entries which is not enough for me so my oldest entries get deleted after approximately 22-23 days...
Can anyone from Nokia confirm this? Is S60v3 log limited to 1000 entries? It happened before and it happens also with the newest 051.xxx firmware.
How to resolve this? Cut back on phone usage?!

After call ends the call log entry is red and I ha...

This problem started after a version upgrade. What a pain. How come when I finish a call log entry is marked read and I have a notification about it as though it's a missed call. Skype hasn't been the same since Microsoft bought it

See "Unexpected installation error -203"
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox

Call Logs do not show up on my Q10

Hi Friends,
Call logs do not show up even after recieving/dailing calls. When i open the call log page, it shows blank page.
Please help;
Did i miss anything to enable.
Thank you

Hello, you didn't miss anything, Try to restart your BlackBerry 10 device; it should fix this.
If you have an answer to your question then please click “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit.
BB 8700 -> Bold 9000 -> Curve 8520 -> Bold 9700 -> Curve 9320 -> Bold 9900 -> BlackBerry Z10 + PlayBook 64 GB Wi-Fi

Why its showing error : Invalid Object Name 'table name' when we try to insert data ?

Hi,
    When i try to insert data in the database with the following query
                con.Open();
                cmd = new SqlCommand("insert into good(ID,Name) values('" + textBox1.Text + "','" + textBox2.Text + "')", con);
                cmd.ExecuteNonQuery();
                MessageBox.Show("Insert success");
                con.Close();
    its showing following error Invalid Object Name 'good'

Use 3-part naming like: MyDatabase.dbo.good(ID,Name) .
Also consider using stored procedure for database INSERTs.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Call Log auto deletes

I let my brother borrow my 8130 for a day and ever since then my call logs, messages, and emails are all automatically deleted once a day. I dont know how to disable this feature. Any suggestions?
Solved!
Go to Solution.

i had this problem before and it was related to the memory. i purchased a memory card and transferred all my pictures, ringtones, etc on it. You might want to close all your opened conversations, maybe clean out some of the items in your custom dictionary as well. I also run the memory cleaner everyday and that seemed to help.
hope that helps!

50462720 FREE in memory yet CALL LOGS STILL DELETE!

I have only had this phone for about a week - I have checked every setting as per this website, I have moved all pics and media to a card and deleted all but 1 email, plus I deleted the languages etc....and still, my call logs delete - either randomly during the day (I may have up to 10 calls logged then they disappear) or they just won't be saved at all for a whole day. then, this morning, I woke up with my phone saying I had 7 missed calls - the phone never rang (its next to my head and on loud ) and when I went to view the missed calls, there were none - so frustrating!
so BESIDES the memory issue (I am assuming having 50462720 free file is enough to keep my call logs for a day at least?) what else could be the problem? I am able to return this and get another one if I need to but not if i'm going to experience the same problem. help!!
thanks a ton! Legare

JeremyKitching wrote:
OK, 13MB sounds more like it. Check the following links below for maximizing memory on the device:
http://blackberryfaq.com/index.php/How_do_I_free_up_memory_on_my_device%3F
http://blackberryfaq.com/index.php/Why_is_my_BlackBerry_losing_its_call_logs_or_message_logs%3F
Ok, I've cleaned out all the unused languages and the memory cache... It worked for approx 2 weeks and then this morning with only 3 (new) emails and one text messages in my inbox it wiped my call list and sms text message!! I wiped everything again this morning. How much free memory do i need to have in order to prevent this from happening??????

WS Navigator shows error "Invalid Response Code (500)

I have published a ECC 6.0 webservice in PI Service Registry. I use NW Dev Studio and attempt to find the published WS but I get an error in the WS Navigstor.
Endpoints were created so I attempt to consume it in NWDS but I get the the following error:
"Invalid Response Code: (500) WSDL could not be generated The requested URL........""
In somamanger I can see the WSDL and it looks fine...
Any ideas or steps that I need to do or missed?
Thanks
Mikie

Hi,
Are you able to test the web service on the web service navigator successfully. On the soamanager you have an option for testing the web services in web service navigator.
Regards,
Yasar

Call log keeps deleting

I have the BB Curve 8320..and my call log keeps disappearing! I want to keep a log in there for at least 10 days..maybe a couple of weeks, but it erases I think every time a new missed call comes in. Any advice?
Thanks

Sounds like your device is running low on memory. For a quick fix try this: Go into Options | Status and look at the File Free numbers. Then reset your phone by removing the battery for 1 min then replacing it. Afterwards look at your File Free number again to see if it increased. Check the following link for ways to free up additional memory on your device: http://www.blackberry.com/btsc/KB14320
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

SSRS 2008 R2 calls Oracle stor proc produces error invalid number or type of parameters

Hi,
Our Microsoft SQL Server Reporting Services (SSRS) version 2008 R2 reports have been working for years. They retrieve data from stored procedures on an Oracle 11 DB using the Oracle 11 Client. After the Oracle Client on the SSRS server was upgraded from version 11 to 12, none of the reports work anymore.
Trying to open any report in IE displays the following error:
Query execution failed for dataset 'ds_MyDataset'. ---> System.Data.OracleClient.OracleException:
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'usp_MyOracleStoredProc'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
The simplest example we're using to troubleshoot the problem is a report that has no parameters, which calls an Oracle stored procedure which has no input parameters, and only 1 output parameter (of type "Ref Cursor", the one Oracle needs in order to return the resultset). Even this simple report produces the error shown above.
I placed a "debugging aid" inside the body of the stored procedure, a SQL insert statement to log to a table, so I can see if the body of the procedure's being executed at all. It never runs. That leads me to think that the error occurs before executing the procedure, when SSRS is probably using something like DeriveParameters() to detect the number and type of parameters the procedure has.
This leads me to think that when SSRS detects which parameters the Oracle procedure has, the Oracle Client returns 1 parameter (the output cursor). SSRS looks at the number of parameters defined in the report's dataset, and it finds zero b/c the output cursor parameter Oracle uses to return the data doesn't need or can't be defined in SSRS. Then SSRS compares 1 <> 0, and displays the error.
So, in order to test, I removed the output parameter (the one of type "Ref Cursor") from the Oracle stored procedure, and then the report runs, and the body of the procedure gets executed. There are no errors, but no data b/c the output cursor parameter has being removed from the Oracle procedure.
This leads me to think that in this case, when SSRS detects which parameters the Oracle procedure has, the Oracle Client returns zero parameters. SSRS looks at the number of parameters defined in the report's dataset, and it matches b/c there aren't any, so SSRS proceeds to execute the procedure.
Could there be a "miscommunication" between SSRS 2208 R2 and Oracle Client 12 in reference to the number of parameters, b/c with Client 11 all reports work, but with 12 none works?
Any help with this matter will be greatly appreciated.
Sincerely,
Richard

Our Microsoft SQL Server Reporting Services (SSRS) version 2008 R2 reports have been working for years. They retrieve data from stored procedures on an Oracle 11 DB using the Oracle 11 Client. After the Oracle Client on the SSRS server was upgraded from version 11 to 12, none of the reports work anymore.
Havent' run across that one before but it sounds like more of a problem with SSRS than anything to do with Oracle.
But what you posted above raises the obvious question: WHY?
Why did you upgrad the Oracle client to 12c to begin with if you are still using an Oracle 11g database? Major upgrades like that are normally done for very specific reasons so what were they?
I suggest you test by reinstalling the 11g client and get your reports working again.
Also - did you install the new version of ODAC to support the new Oracle client? There could be a compatibility issue if you are using a new Oracle client but the older ODAC version.
ODAC 12c Release 2 installation instructions
You also need to make sure the bit versions (32 vs 64 bit) match.

Delivery Deleted, Showing error when deleting sales order. R3, Oracle9i

Hi experts,
One of my users deleted delevery document and when he is trying to delete sales order it is giving error.
Also it is showing delivery archived. How to retrieve the document.
Thnx in advance

Hi Dhanush,
I suppose there is no need to run any consistency jobs for this issue(as per my understanding).
As specified above by Senthil just try first running //CCR for the LOC_PRODUCT with category as Sales Order (also tick the VBBE table option) and Purchase Order. I think this will solve your purpose. Also please make sure that the IMs for the LOC_PRODUCT is active.
Do let us know your findings on the same.
Thanks and Regards,
PP.

Adobe Reader Plug-in shows error 'Invalid plugin detected. Adobe Reader will quit.'

I followed all the steps provided in the development guide. Still it shows this error. Please provide any help!

No Luck
We received the 'RIKLA-DigCert.rc' file along with 'T&C of Adobe' file. I followed the following steps as provided by Adobe's Developer's guide:
After receiving the digital certificate, enable the plug-in for Adobe Reader, by performing the following tasks:
1.Make a copy of dummy.rc and put it in your project directory.
2.Open your plug-in project in Visual Studio. Make sure you are in Resource View.
Adobe Acrobat SDK Creating an Adobe Reader Plug-In
Developing Plug-ins and Applications Creating resource files on the UNIX platform 248
3.Open dummy.rc from your project directory. Copy the API_ENCRYPTED_DIGEST data segment (a dummy encrypted digest) to the resource portion of your plug-in.
4.Open the digital certificate file returned to you by Adobe. Copy the API_DIGITAL_CERTIFICATE data segment (your digital certificate) to the resource portion of your plug-in.
5.Rebuild your plug-in. The plug-in will be created with the correct API_DIGITAL_CERTIFICATE data segment and a dummy API_ENCRYPTED_DIGEST data segment, which will be replaced with real data in the next steps.
But the problem is, when I open ''RIKLA-DigCert.rc' file, I got only '
API_DIGITAL_CERTIFICATE' inside but no'API_ENCRYPTED_DIGEST' as shown in Step-3. How do I get that? Also, we have already created Acrobat Plugin file which has got our project resource file (.rc). How do I use the same plugin for Adobe Reader as well? Is there any step missing? please provide any help as this is stopping our progress even after getting the License. Thanks in advance!

800W - Send Key Call Log no longer shows names

Every so often, when I hit the send key and see the log, I only see numbers. I normally am suppose to see names instead of numbers. Only way to fix this would be to do a restart. This is getting really annoying, is there any fix for this?
Post relates to: Treo 800w (Sprint)

I'm not sure what could cause that. Is it possible there are many programs running? Next time it happens, check your Task Manager and see whether ending task on some of them helps with the problem.
Post relates to: Treo 800w (Sprint)

E7 - How to show contact no in call log

I've found out that my call log didn't show the number of the contact. How can i enable it?
Solved!
Go to Solution.

Long press the call log entry, then you can see the options.
for example:
Menu > Applications > Log > Recent calls > Missed calls > Long press entry and see following:
- Call,
- Create Number,
- Save To Contacts,
- Use Number,
- Delete

Deleted call logs

If for example a call was received on a sony experia mobile phone at a certain time, then when looked at the call log was deleted how would I
1. Recover the deflated call log ?
2.it was said that the call was received from a viber account . But the number was 5++4 then obviously 7 and the rest of the number.. Now I know that you remove the plus 44 and add 07 to make the number a valid callable number.. . If the call was from a viber account is this the correct number to call back , if they had made a new number on viber would the new number still ring the original telephone number.. I.e is the made up number synced to the correct number.?..
3. So is there any way I can retreive this deleted call log from either the phone, or from the viber account somehow?
Also when I went into viber this particular number and contact information was not down as a contact that was actually using viber
Think you no what I'm getting at .. !, they think there clever deleting certain call logs , then trying to lie about it was a viber account fone number, that you can't call back.. !, I'm not stupid and I already no the answers to my questions.. But proof is what I really need .. Pleae help

Your pearls are getting low on memory and in this state the first thing they do is delete message and call logs . I suggest do a google search on blackberry memory leaks and fix`s . One nice little app that helps alot is Soft Reset , its free and best to download OTA from your blackberry browser , use it once or twice a week and save alot of headaches no more battery pulls . Secondly go to options , security options , memory cleaning , enabled = yes , show icon on home screen = yes and save these settings . Now in your apps icons there will be a new icon looks like a paper shredder , click once and it will clean your memory , do this once or twice a week as well .

Call log entry deleting shows error "invalid selec...

Similar Messages

Maybe you are looking for