Call log history problem after 10.3 update

Hi
I updated my blackberry Z3 last week to 10.3 . every thing is working fine except the call log history.
my phone not able to retain call history for more than 3 to 4 days. i restored it to factory setting, but nothing helped.
Thanks in advance

Take a look at http://www.blackberry.com/btsc/KB36134
It doesn't refer to the first error, but it does the second.
- Ira

Similar Messages

Lost Call log history

My both phones (Z30 & Q10) were upgraded automaticly through wireless wifi to the new os 10.3 and after restart i shocked that my call log history became limited to one week. i tried to search for the old recoreds through the hub but its also resized of the call logs I need my call log back to me as im using the phones for business and relying on my log most of time. If its not possible to retreives the log back on os 10.3 how can i downgrade to 10.2 ?? Thanks

After searching the forums for any solution, the only response i found is to wait for the next update which may solve this issue of call log history. about downgrading the os from 10.3 to 10.2, process can be done through out store apps which will not restor the entire call log history unless you have the old bachup. thanks

At least one month call log history not save

i am using iphone5s and version is ios 7.0.4, this phone is not displayed at least one month ago call log history.
so plz tell me how can i solve this problem? if any apk available tell me aname or any setting about that problem plz inform me.
thnks

abhijitnmunje wrote:
give me a perfect solution
The only solution is that it only stores the last 100 calls. There are no settings to change that.

Wifi problem after.4.3 update on xperia z

Hi all,
After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
Here's the problem in detail:
When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
Regards,
Danny
Sony Xperia Z
Modelnumber: C6603
Android version: 4.3
Kernal version: 3.4.0-ge09aff8
Build number: 10.4.1.B.0.101

I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

Call log menu problems!

When i open the call log theres upper menu's on the top of the screen, at first i could browse through them but now i can't. I have to open the call log and go to Received,Missed or Dialed calls separately not all at once:/ I have the same problem with the other upper menus other than the calling ones. Can anyone help plz?! How do i fix this? Natalie.

Well, a lot of things can happen in one week. You can also bring your E73 back to your retailer, but the first thing they'll do is reset the phone. There seems to be a firmware update for your device. You can try that as well. Make sure that after the update you reset the phone *#7370# and restore the backup you made earlier without the settings.
/t5/Eseries-and-Communicators/E73-and-wireless/m-p/714660/highlight/true#M71136
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Problems After Latest Security Update From March 10, 2015

Is anyone having problems after the latest security update from March 10th?
First my screen went from 16:9 to 4:3 and the resolution turned into a blocky 800 x 600. I managed to find a program
online to correct this problem called SwitchResX. It's unfortunately a pay program for 14 Euro. Here's the link
in case anyone needs it http://www.madrau.com/index.html
Now some alias icons in my dock have disappeared, but are kinda visible when I run my mouse over them, their
names pop up, but have no icons in the dock.
Sometime booting up is clumsy with a lot of hang time and I have to restart my Mac Mini manually by pressing
the button in the back to get a clean bootup to my desktop screen.
Could Apple do a fix real soon for this Security Update blunder?
Any help would be appreciated.

I too experienced problems with the keyboard and mouse on this G5, starting about a week ago when I installed the Java Release 6 and QuickTime 7.3.1 updates. The two symptoms I noticed most were slow, jerky scrolling through topic lists in MT-NewsWatcher (using the arrow keys) and difficulty with selecting text with the mouse in Safari (the selection being anchored several characters away from where I’d begin a click-&-drag).
The latest patch, Security Update 2007-009 (PowerPC) v1.1, seems to have solved the problems for me.

Problem after anti-virus update

Hello everybody.
One of our client uses Oracle XE on a Windows server. Two days ago after an automatic update for the installed anti-virus, Oracle stoped to work. The Listener does't come up any longer. I'm waiting for the listener.log file from the client. In the meanwhile, any idea about this issue? Thank you. Filippo

They said me that the anti-virus is Symantec and doesn't have any firewall service. Even with it down, the problem is still alive.
The part of listener.log when the problem started was:
16-NOV-2006 05:13:54 * service_update * xe * 0
16-NOV-2006 05:15:00 * service_update * xe * 0
16-NOV-2006 05:15:33 * service_update * xe * 0
16-NOV-2006 05:19:24 * service_update * xe * 0
16-NOV-2006 05:27:39 * service_update * xe * 0
16-NOV-2006 05:32:03 * service_update * xe * 0
16-NOV-2006 05:36:27 * service_update * xe * 0
16-NOV-2006 05:46:27 * service_update * xe * 0
16-NOV-2006 05:56:30 * service_update * xe * 0
16-NOV-2006 06:06:33 * service_update * xe * 0
16-NOV-2006 06:16:36 * service_update * xe * 0
16-NOV-2006 06:26:39 * service_update * xe * 0
16-NOV-2006 06:36:42 * service_update * xe * 0
16-NOV-2006 06:56:48 * service_update * xe * 0
16-NOV-2006 07:16:54 * service_update * xe * 0
16-NOV-2006 08:27:15 * service_update * xe * 0
16-NOV-2006 08:47:21 * service_update * xe * 0
16-NOV-2006 09:07:27 * service_update * xe * 0
16-NOV-2006 09:17:30 * service_update * xe * 0
16-NOV-2006 09:22:58 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1090)) * establish * xe * 0
16-NOV-2006 09:23:03 * service_update * xe * 0
16-NOV-2006 09:23:34 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1096)) * establish * xe * 0
16-NOV-2006 09:23:36 * service_update * xe * 0
16-NOV-2006 09:28:42 * service_update * xe * 0
16-NOV-2006 09:29:06 * service_update * xe * 0
16-NOV-2006 09:29:13 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1108)) * establish * xe * 0
16-NOV-2006 09:29:39 * service_update * xe * 0
16-NOV-2006 09:31:40 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1119)) * establish * xe * 0
16-NOV-2006 09:31:42 * service_update * xe * 0
16-NOV-2006 09:31:51 * service_update * xe * 0
16-NOV-2006 09:32:24 * service_update * xe * 0
Non pi in ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srvml2.miniliner.locale)(PORT=8080))(Presentation=HTTP)(Session=RAW))
16-NOV-2006 09:38:07 * service_died * xe * 12547
TNS-12547: TNS: contatto perso
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-NOV-2006 09:42:53
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Il file dei parametri di sistema �C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Messaggi di log registrati in C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Informazioni di trace registrate in C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Il livello di trace attuale �0
Avviato con PID=1484
Ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srvml2.miniliner.locale)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
16-NOV-2006 09:43:45 * service_register * xe * 0
16-NOV-2006 09:44:00 * service_update * xe * 0
16-NOV-2006 09:44:06 * service_update * xe * 0
16-NOV-2006 09:44:27 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1146)) * establish * xe * 0
16-NOV-2006 09:44:27 * service_update * xe * 0
16-NOV-2006 09:52:02 * service_register * CLRExtProc * 0
16-NOV-2006 09:52:02 * service_register * CLRExtProc * 0
16-NOV-2006 09:53:50 * service_update * CLRExtProc * 0
16-NOV-2006 09:55:40 * service_update * CLRExtProc * 0
16-NOV-2006 09:57:29 * service_update * CLRExtProc * 0
16-NOV-2006 09:59:19 * service_update * CLRExtProc * 0
16-NOV-2006 10:01:08 * service_update * CLRExtProc * 0
16-NOV-2006 10:02:57 * service_update * CLRExtProc * 0
16-NOV-2006 10:04:47 * service_update * CLRExtProc * 0
16-NOV-2006 10:06:36 * service_update * CLRExtProc * 0
16-NOV-2006 10:08:25 * service_update * CLRExtProc * 0
16-NOV-2006 10:10:15 * service_update * CLRExtProc * 0
16-NOV-2006 10:12:04 * service_update * CLRExtProc * 0
16-NOV-2006 10:13:54 * service_update * CLRExtProc * 0
16-NOV-2006 10:15:43 * service_update * CLRExtProc * 0
16-NOV-2006 10:17:32 * service_update * CLRExtProc * 0
16-NOV-2006 10:19:22 * service_update * CLRExtProc * 0
16-NOV-2006 10:21:11 * service_update * CLRExtProc * 0
16-NOV-2006 10:23:00 * service_update * CLRExtProc * 0
16-NOV-2006 10:24:50 * service_update * CLRExtProc * 0
16-NOV-2006 10:26:39 * service_update * CLRExtProc * 0
16-NOV-2006 10:28:29 * service_update * CLRExtProc * 0
16-NOV-2006 10:30:18 * service_update * CLRExtProc * 0
16-NOV-2006 10:32:07 * service_update * CLRExtProc * 0
16-NOV-2006 10:33:57 * service_update * CLRExtProc * 0
16-NOV-2006 10:35:46 * service_update * CLRExtProc * 0
16-NOV-2006 10:37:35 * service_update * CLRExtProc * 0
16-NOV-2006 10:39:25 * service_update * CLRExtProc * 0
16-NOV-2006 10:41:14 * service_update * CLRExtProc * 0
16-NOV-2006 10:43:04 * service_update * CLRExtProc * 0
16-NOV-2006 10:44:53 * service_update * CLRExtProc * 0
16-NOV-2006 10:46:42 * service_update * CLRExtProc * 0
16-NOV-2006 10:48:32 * service_update * CLRExtProc * 0
16-NOV-2006 10:50:21 * service_update * CLRExtProc * 0
16-NOV-2006 10:52:10 * service_update * CLRExtProc * 0
16-NOV-2006 10:54:00 * service_update * CLRExtProc * 0
16-NOV-2006 10:55:49 * service_update * CLRExtProc * 0
16-NOV-2006 10:57:39 * service_update * CLRExtProc * 0
16-NOV-2006 10:59:28 * service_update * CLRExtProc * 0
16-NOV-2006 11:01:17 * service_update * CLRExtProc * 0
16-NOV-2006 11:03:07 * service_update * CLRExtProc * 0
16-NOV-2006 11:04:56 * service_update * CLRExtProc * 0
16-NOV-2006 11:06:45 * service_update * CLRExtProc * 0
16-NOV-2006 11:08:35 * service_update * CLRExtProc * 0
16-NOV-2006 11:10:24 * service_update * CLRExtProc * 0
16-NOV-2006 11:12:14 * service_update * CLRExtProc * 0
16-NOV-2006 11:14:03 * service_update * CLRExtProc * 0
16-NOV-2006 11:15:52 * service_update * CLRExtProc * 0
16-NOV-2006 11:16:45 * service_update * xe * 0
16-NOV-2006 11:16:45 * service_update * xe * 0
16-NOV-2006 11:16:47 * service_died * xe * 12547
TNS-12547: TNS: contatto perso
16-NOV-2006 11:16:58 * service_register * xe * 0
16-NOV-2006 11:16:58 * service_update * xe * 0
16-NOV-2006 11:17:04 * service_update * xe * 0
16-NOV-2006 11:17:10 * service_update * xe * 0
16-NOV-2006 11:17:42 * service_update * CLRExtProc * 0
16-NOV-2006 11:19:31 * service_update * CLRExtProc * 0
16-NOV-2006 11:21:20 * service_update * CLRExtProc * 0
16-NOV-2006 11:23:10 * service_update * CLRExtProc * 0
16-NOV-2006 11:24:59 * service_update * CLRExtProc * 0
And 1tnslistener.log is:
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-NOV-2006 20:09:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Il file dei parametri di sistema C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Messaggi di log registrati in C:\oraclexe\app\oracle\product\10.2.0\server\network\log\1tnslistener.log
Informazioni di trace registrate in C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\1tnslistener.trc
Il livello di trace attuale 0
Avviato con PID=3136
TNS-01151: Manca il nome del listener, 1TNSListener, in LISTENER.ORA
Thanks a lot
Filippo

BUG: text rendering problems after keyboard firmware update

Hey all!
Just letting you know that today, after installing the keyboard/mouse firmware update 1.0, the font rendering in many applications become weird, letters may overlap, see some screenshots:
http://artemio.net/tmp/apple/bug1.png
http://artemio.net/tmp/apple/bug2.png
My system is iMac Intel Core Duo 17", 2 GB RAM, 250 GB HDD, Mac OS 10.4.6.

Just to clarify, that was a software update, not a firmware update. I don't think the keyboard has any resident firmware.
Since this is a new update from Apple, and there have been very few posts about problems after it was installed, (I have seen a couple here) I think that you should call and speak directly with an Apple Customer Service rep. That way Apple knows some have issues with the update and they may have suggestions.
Let us know what they say.

Anyone experiencing screen resolution problems after latest Mavericks Update?

Anyone got a blurred monitor after the latest Mavericks Update?
I am running Mavericks 10.9.2 on a Mini Mac with a Logic TV/Monitor. Since the latest Mavericks update I no longer have the option in settings to scale to 1600 x900. Since this gives the best picture on my monitor I now have either a blurred screen with large text or a blurred screen with very tiny text. No other options that give a 'normal' display seem available now, after allowing the 'Update'. The update claims to be addressing faults on the MacBook display, which it may well do, but it has also apparently screwed up Mac Mini screen resolution Options for some of us.
I have reverted back to 10.9.2 and turned off automatic updates, but I can't stay that way indefinitely.
I've tried to find an e-mail address or phone number to log my complaint to Apple but to no avail. (I guess they would otherwise be inundated with customer complaints so keep that kind of information under wrapps). Anyone got any ideas?

I'm not having any problems with dual DVI connected Samsung 21.5" monitors in 10.9.3
What connection (adapter, cable, etc.) are you using..?
To send Apple Feedback, go to > Apple - Mac OS X - Feedback
If your looking for better resolution options, try > Mac App Store - Display Menu

Skype keeps logging me out after windows 10 update

Ever since I updated to Windows 10 a few days ago, skype keeps logging me out after 10 min or so. I read other posts all which suggested unlinking your account from your microsoft and/or Facebook account, which I tried but it didnt help. I am not linked to either of them. I am using the desktop version of Skype, not the windows app. I never had any problems before this windos 10 upgrade. Any ideas?

http://heartbeat.skype.com/2014/09/i_keep_getting_signed_out.html
Open your Skype account settings page:
https://secure.skype.com/portal/account/settings
If your Skype account is linked with Microsoft account, then try to unlink them.
https://support.skype.com/en/faq/FA12211/how-do-i-unlink-my-skype-and-microsoft-or-facebook-accounts

Network problem after new OSX update download

Greetings!
I've had a new (late 06) Intel 24" iMac networked wirelessly to my older iMac/cable modem/D-Link router very successfully since October. No problems and seamless set-up through the D-Link online wizard software.
Saturday I noticed an OSX upgrade to 10.4.8 (211mg) and went ahead and did the download on the wireless (Intel) iMac.
Upon restart, however, I have not been able to reconnect to my network. Airport is ON, but choosing my network name returns an error message. I have also attempted to reboot both cable modem and router, and reentered the D-Link wizard to both doublecheck the old network, and set up a new network, but saving these settings seems to fail by not recognizing the device, the router.
One of the error messages (on the wireless iMac) claims that my "settings have been changed by another application" (or to that effect) but does not give any clue as to how to determine what or where.
Also, since attempting to start from scrtch with the router, I no longer seem to get a full signal from the airport -- in Internet Connect, I no longer see a nice row of blue signal lights.
As you may be able to tell, I am new to networking, and the D-Link setup had helped make it simple -- tht is, I bumbled my way through it and was pleased with how well it worked. Now, after the OS update, not having the network is annoying -- and potentilly disastrous, as I need this machine online by Saturday.
Anyone able to give me a gentle hand, or nudge in the right direction?
Thanks in advance!
Bill
PS- Mac user since 1991! Wireless network user since only late October!

Hi again,
Sorry, BDAqua, I didn't see your note. I don't quite understand the last line of your suggestion -- a number greater than the number of CPUs? Not sure what you mean...
Phil, thanks for your note, too.
I believe the answer to your first question is 802.11g -- this is what it was set to.
After trying again to connect, using my old passwords, I was able to see the blue signal strength barss, and the Airport icon flashed on and off a few times, but ultimately the connection attempt failed again every time I tried it.
At this point, I'm no longer confident that my router is sending out a recognizable signal -- is this possible?
Also, in the dialog box in which available networks are usually shown (which has not happened since my original connection in October), today I was faced with a choice I hadn't seen before: 2WIRE736 -- is this likely to be someone else's network (a neighbor's)? I was wondering -- I'd never seen that one before. However, my own network names do not show up for choosing, and when I use Internet Connect to request them (and add WPA Personal and passwords), the connection appears to fail immediately.
At this point, should I attempt an OSX reinstall? Or has something I described made some sense for you?
Again, still very appreciative of all your help and patience with my ignorance.
Bill

Xfce shortcut problems after today's updates

Xfce shortcuts defined in keyboard settings doesn't work at all, even the default ones like alt+f2. They were still working in the morning, but they stopped after today's updates. I think it has something to do with kbd package, but I can't honestly say.
Anyone experiencing something similar?

Most probably you need to logof, go into the console and wipe anything related to xfce on your home folder and start xfce again. Its a pain to get everything as you want again but at least you avoid problems like the one you have now.
You may also see a problem with the icons, just pull tango-icon-theme and all will be well.

Printing problems after installing Security Update 2015-002

After installing Security Update 2015-002 on three separate computers on two different WiFi networks, printers on the network are losing their connections to the computers that can print to them. We have experienced this on a network running a Canon printer and an HP printer - both have disappeared on the network although the printer suggests it is still connected to the network. The same thing has happened on a separate network I manage with a single HP printer on that network. I have tried removing the printers, resetting the printers etc. Nothing is working. I can get one print out of a printer when I turn the printer off and then on. Three minutes later the printer is no longer connected to the computer - although still connected to the network. Please Help.

I think I have figured out that it is in fact the Apple Extreme Base Station that is losing the printer. It is very odd because the printer is connected to the Wifi. My computer is connected to the WiFi and connecting to the internet. The Router for the internet can see the printer. An Apple Extreme is then connected via a network cable in Bridge mode to the router. When I turned the power off the The Apple Extreme and then restored power it all worked. was still working this morning, but again this afternoon I needed to reboot Apple Extreme. It is quite strange that this is happening on two different Networks in different parts of the country at the same time. Maybe the Security Update is somehow affecting/blocking communication with the printer? I just don't know enough. These networks have been up and running with the same printers and computers for years with zero problems - all of a sudden we have the same problem on both Networks.
Any help will be very much appreciated.

Airport Problems after "AirPort Extreme Update 2008-001" (1.0)?

I recently installed the update and have been unable to connect to my wireless network at home ever since. The airport detects my router and asks if I would like to join the network, but after I click yes, it says "there's an error in connecting", and thus no connection is made.
I can, however, get internet connection through ethernet from my router.
I can't be totally sure the update is the cause of the problem, but I haven't downloaded or installed anything else recently, and all other pc's wireless connections work fine with my router. I also haven't tried connecting through other wireless networks, so I'm not sure if the problem is exclusive to my router.
Has anyone else had similar problems after the update?
Also, does anyone know the default settings for the airport? I'm wondering maybe I have altered settings that's causing this problem.
Any help is greatly appreciated

I have the same problem but I have not found a fix.

Problem after iOS 6 Update.

I gotta problem after i updated my iPhone 4 to iOS 6. It's a factory unlocked iPhone, then when i change the sim to another network theres no service at all, changed to same network's sim ( the one i am using now, but this one's working fine ) but different number its still no service. But when i use the sim that i used to put in when i updated to iOS 6 its working. Really need someone's help. Its bothering me.
BTW Before even updating i tried all the sims and all are working hella fine.

Try a hard reset.....
Press and hold the Wake / Sleep button and the Home button at the same time, keep them both pressed until the Apple Logo appears.

Call log history problem after 10.3 update

Similar Messages

Maybe you are looking for