Call log issue after upgrading to OS 10.3.1.158​1 from 10.2

Dear all.
I have update my BlackBerry 10 os to 10.3.1.1581 and to my surprise i find that the call log os restricted to about 150-200 call whereas it was almost unlimited in the previous 10.2 os .
BlackBerry should issue a fix asap since this is such a basic features and necessity.
I find myself in a very bad situation after upgrading.

I have two call lors. One in the phone app, and one in the hub.
I feel like the one in the phone app is quite short, but the one in the hub is unlimited.
Do you confirm on your side?
That being said, tracking more than 150 previous calls regularly is an extreme usage of the phone, I don't think the OS is made for that. I suggest you use a third party app that will be suited at tracking 200 phone calls a day.
There are several that are free currently in BlackBerry World (the Free March section).
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • IPhone 4s issues after upgrading to IOS 8

    Have few issues after upgrading to iOS 8
    - Phone hangs every few hours, reboots automatically
    - Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
    - Searching for contacts is a problem
    - Apps hang (especially facebook)
    Any way to go back to iOS 7 ?
    Any other tips / tricks appreciated..
    Venkat

    No way to come back to iOS 7 ...
    But did you tried to reset all settings (general -> reset -> all settings) ?
    For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

  • Cannot End Call on Q10 after upgrading to OS 10.2

    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

    marootz wrote:
    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
    From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

    Hi All,
    There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
    This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
    Select query is on the table COSP.
    SELECT (FIELD_LIST)
            INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
            FROM  COSP CLIENT SPECIFIED
            WHERE GJAHR IN SELR_GJAHR
              AND KSTAR IN SELR_KSTAR
              AND LEDNR EQ '00'
              AND OBJNR IN SELR_OBJNR
              AND PERBL IN SELR_PERBL
              AND VERSN IN SELR_VERSN
              AND WRTTP IN SELR_WRTTP
              AND MANDT IN MANDTTAB
            GROUP BY (GROUP_LIST).
       LOOP AT I_COSP      .
         COSP                           = I_COSP      .
         PERFORM PCOSP       USING I_COSP-_COUNTER.
         CLEAR: $RWTAB, COSP                          .
         CLEAR CCR1S                         .
       ENDLOOP.
    ENDSELECT.
    I have checked with the table indexes, they were same as in 4.7 system.
    What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
    Thanks in advance for the responses.
    Regards,
    Dedeepya.

    Hi,
    ohhhhh....... lots of problems in select query......this is not the way you should write it.
    Some generic comments:
    1. never use SELECT
                       endselect.
       SELECT
      into table
       for all entries in table
      where.
       use perform statment after this selection.
    2. Do not use into corresponding fields. use exact structure type.
    3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
        e.g in your case
              sequence should be
    LEDNR
    OBJNR
    GJAHR
    WRTTP
    VERSN
    KSTAR
    HRKFT
    VRGNG
    VBUND
    PARGB
    BEKNZ
    TWAER
    PERBL
    sequence should be same as defined in table.
    Always keep select query as simple as possible and perform all other calculations etc. afterwords.
    I hope it helps.
    Regards,
    Pranaya

  • Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between in one of the outside  interface
    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between the session at one of the  interface but working fine with another interface,
    i have outside  and backup interface which work on internet failover when internet  routed through backup interface the issue getting started but working  fine if traffic is going via outsid

    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between in one of the outside  interface
    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between the session at one of the  interface but working fine with another interface,
    i have outside  and backup interface which work on internet failover when internet  routed through backup interface the issue getting started but working  fine if traffic is going via outsid

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • Issues after Upgrade from Oracle 10.1.0.5 to 10.2.0.5 in Windows Server2003

    Good Morning Good People,
    I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
    ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
    I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
    I've tried serval different things to trouble shoot the issue but nothing seems to work.
    If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
    Edited by: user10835577 on Aug 29, 2010 9:15 AM

    From the client or the server?
    SERVER:
    tnsnames.ora:
    MCQUERY=
    (DESCRIPTION=
    (ADDRESS=
    (PROTOCOL=TCP)
    (HOST=10.36.27.184)
    (PORT=1521)
    (CONNECT_DATA=
    (SERVICE_NAME=MCQUERY)
    listener.ora
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
    FROM REMOTE SQLPLUS Client:
    tnsnames.ora
    MCQUERY=
    (DESCRIPTION=
    (ADDRESS=
    (PROTOCOL=TCP)
    (HOST=10.36.27.184)
    (PORT=1521)
    (CONNECT_DATA=
    (SERVICE_NAME=MCQUERY)
    listener.ora
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
    Thanks,
    Malcolm
    Edited by: user10835577 on Aug 29, 2010 12:01 PM

  • Autoconfig issue after upgrading 12.1.1 to 12.1.3

    Hi all,
    I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
    jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
    SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter value for 1: Enter value for 2: Enter value for 3: Connected.
    DECLARE
    ERROR at line 1:
    ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
    ORA-20000: Oracle Text error:
    DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
    ORA-06512: at "SYS.DBMS_SQL", line 1199
    ORA-06512: at line 96
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
    ion
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    jtfictx.sh exiting with status 1
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    .end err out.
    i got below mention some solution from metalink, but that does not working.
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
    according to note we need to create index but its giveing below metion error.
    SQL> @jtfiaibu.sql jtf jtf apps
    Connected.
    DECLARE
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10758: index owner does not have the privilege to use file or URL datastore
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
    ORA-06512: at "SYS.DBMS_SQL", line 1199
    ORA-06512: at line 37
    Thanks in advance,
    Sandeep.

    Hi,
    DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
    Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
    Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
    By the way did u iinstall companion/examples CD after installing OracleSoftware
    Thanks,
    Taher

  • Reverse call log issue

    i keep getting an error when i try to do a reverse call lookup. it says try setting phone list view to "call log" but i don't have that option. It says if this option is unavailable this is a known but and we are working with RIM to correct the issue. If you require assitance accessing the phone list view settings or would like to be notified when a fix is available please use the Send Us Feedback option and indicate Reverse Call Log issue in message. But where is this send us feedback? I'm so confused. Anyone have this problem or know where I can get some help for it? Thanks again

    How did you reload the firmware? Did you backup the data and perform a reset using *#7370# before reloading? Try and reply.
    Nokia C7

  • Audio issues after upgrading to OS X 10.10 (Yosemite)

    Hello,
    I have been facing audio issues after upgrading to OS X 10.10
    - No sound in VLC
    - Re-booting with Option-Command-P-R did not work
    - System sounds are fine
    - Quicktime Player works just fine
    I tried:
    - Plugging in earphones while video was playing on VLC
    - F10/F11/F12 while video was playing on VLC
    - Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
    - Played something in Garage Band (found on a thread elsewhere) and restarted VLC
    None of the above solved the issue
    Any one else facing similar issue with VLC on 10.10?
    How did you manage to fix this?
    I am running VLC 2.1.5 btw.
    Thanks in advance!

    Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
    Youtube, QuickTime, all play with no sound at all.

  • Performance issues after upgrading to 11g

    hello,
    We are facing a performance issue after upgrading from 10g to 11g.
    as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
    and oracle is using TABLE ACCESS FULL on it:
    DELETE FND_ENV_CONTEXT E
    WHERE NOT EXISTS
    (SELECT 'X'
    FROM FND_CONCURRENT_PROCESSES P
    WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
    AND ROWNUM < 10000;
    Plan:
    DELETE STATEMENT ALL_ROWSCost: 74,345                     
         5 DELETE APPLSYS.FND_ENV_CONTEXT                
              4 COUNT STOPKEY           
                   3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449      
                        1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
                        2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
    select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
    15544880 07/07/2011 12:08:55
    please advice.
    Ofer

    Please see these docs.
    Table Fnd_env_context Growing Very Fast [ID 419990.1]
    FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
    FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
    Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
    Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
    Thanks,
    Hussein

  • Another issue after upgrade to 9.0.2a beta

    another issue after upgrade from 8.1.7 to 9.0.2a beta.
    When I use "update-request", I need to specify a stylesheet. In that stylesheet, the following lines work before upgrade:
    <row>
    <fieldname1><![CDATA[<html><head></head><body>]]><xsl:value-of select="request/parameters/fieldname1/."/><![CDATA[</body></html>]]>
    </fieldname1>
    </row>
    After upgrade, it doesn't work properly. What I see in the database field value is storing only
    <html><head></head><body></body></html>
    instead of storing
    <html><head></head><body>fieldname1_value</body></html>
    How can I get my result back?
    Thanks in advance.

    Thanks Steve,
    I've upgraded to 9.0.2.0B but find the following error:
    Oracle XSQL Servlet Page Processor 9.0.2.0.0B (Beta)
    XSQL-017: Unexpected Error Occurred
    java.lang.NoClassDefFoundError: oracle/jdbc2/Clob
    at oracle.xml.xsql.actions.XSQLUpdateRequestHandler.handleAction(XSQLUpdateRequestHandler.java:103)
    at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:134)
    at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:139)
    at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
    at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:83)
    at com.caucho.server.http.Invocation.service(Invocation.java:237)
    at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:323)
    at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:263)
    at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
    at java.lang.Thread.run(Thread.java:484)
    Does it relates to the changes of usage of the "update-request" syntax?
    Thanks in advance
    Felix

  • Stability issues after upgrade from 5 to 6.1?

    Dear all,
    my client plans to upgrade from WLS 5 to 6.1 soon. The application is
    an intranet portal with Epicentric and Vignette used as additional
    products.
    However, some voices say that 6.1 has stability issues. Well, these
    statements are rumours and lack any proof or even anecdotal evidence I
    have heard of, and therefore it is very difficult to respond
    appropriately.
    Having said this, my questions are:
    - Did any of you have stability issues after upgrading from 5 to 6.1
    on Solaris?
    - If yes, what were they and how did you solve them (e.g. upgrade to
    SP 5)?
    - In 1-2 sentences, what is the context of the application?
    My goal is to present a evidence that the romoured stability issues
    don't exist or/and a list of meastures to avoid/solve them, if any.
    Many thanks in advance
    Andreas

    "Andreas Raab" <[email protected]> wrote in message news:[email protected]..
    my client plans to upgrade from WLS 5 to 6.1 soon. The application is
    an intranet portal with Epicentric and Vignette used as additional
    products.
    However, some voices say that 6.1 has stability issues. Well, these
    statements are rumours and lack any proof or even anecdotal evidence I
    have heard of, and therefore it is very difficult to respond
    appropriately.
    Having said this, my questions are:
    - Did any of you have stability issues after upgrading from 5 to 6.1
    on Solaris?
    - If yes, what were they and how did you solve them (e.g. upgrade to
    SP 5)?
    - In 1-2 sentences, what is the context of the application?
    My goal is to present a evidence that the romoured stability issues
    don't exist or/and a list of meastures to avoid/solve them, if any.Hi Andreas,
    Normally proving that rumors are true is a responcibility of
    rumors suppliers. Reverse does sound to me like a joke.
    Regards,
    Slava Imeshev
    P.S. Current weblogic 6.1 is a stable product.

  • After upgrading to the latest Firefox, my icon disappeared from my start up screen and I can't find how to get it back

    After upgrading to the latest Firefox, my icon disappeared from my start up screen and I can't find how to get it back.

    Go to START then ALL PROGRAMS then find MOZILLA FIREFOX, right click on it, select SEND TO, and select DESKTOP(CREATE SHORTCUT).
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • After upgrade to ios7 on iphone parts of audiobooks from Overdrive will notsync. sync.I'm using usb to desktop to transfer.

    After upgrade to ios7 on iphone, parts of audiobook from Overdrive will not sync. I'm using usb to desktop to transfer.

    Plug in the memory stick and it should open then create a New Folder and drag and drop the contents from the memory stick to the new folder you created. Remove the original memory stick all the information should be in the new folder you created. Now plug in the new memory stick with nothing on it when it opens drag the folder with the contents from the original memory stick folder and all into the new memory stick that opened and there you have it.
    CHEERS
    DON

Maybe you are looking for

  • Can I install Windows 7 64-bit on my mid-2007 dual quad core "Clovertown"?

    Hi all, I want dearly to install Windows 7 64-bit on my MacPro, but the only online compatibility information says bootcamp 3.1 for 64-bit works with "early 2008" Macs and not "mid-2006" Macs. I'm stuck in between, for I purchased a mid-2007 MacPro w

  • Bridge think photoshop is busy with a task  -  CS6/Window 7

    Bridge keeps telling me that photoshop is busy with a task and asks if a wish to queue the request. Photoshop is not busy. I can go to photoshop and open and close items, run batch process, ect. I even tried closing and opening Photoshop. Bridge stil

  • Weird Behavior not saving correctly

    I have a JSP page that uses the <tiles:insert> . Every time I go to save it, it takes the contents of the definition file and INSERTS it at the bottom of the JSP I am working on. I can therefore, never save this file correctly. This appears to be a m

  • Os 10.4.7, reboots instead of waking from sleep

    periodically my mac reboots instead of waking from sleep (with mouse or keyboard), once every few days. is this a problem? how can i change that? should i worry about it?

  • How do I get rid of "!" marks on top Bar?

    There are eight "!" characters before the wi-fi mark on the top bar. The only information I get from them is that the demo expired, and that I should buy or register it. Tell me how to get rid of them or I shall have to go back to Safari