Call Logs do not show up on my Q10

Hi Friends,
Call logs do not show up even after recieving/dailing calls. When i open the call log page, it shows blank page.
Please help;
Did i miss anything to enable.
Thank you

Hello, you didn't miss anything, Try to restart your BlackBerry 10 device; it should fix this.
If you have an answer to your question then please click “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit.
BB 8700 -> Bold 9000 -> Curve 8520 -> Bold 9700 -> Curve 9320 -> Bold 9900 -> BlackBerry Z10 + PlayBook 64 GB Wi-Fi

Similar Messages

Nokia E73- Call log does not display entries

I recently purchased a E73 by itself.
For some reason the call log does not display any telephone numbers or activity in recent calls; missed calls, received calls, dialed numbers. It would show that I have a missed call but when I enter it, it says (no missed calls).
Any ideas? Please let me know...
Thanks

Enable and set log duration to 30days.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I am recieving calls from a solicitor. Show up as no caller Id. I want to block all calls that do not show caller Id. Can I do that? I am on the do not call list

How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the national do not call list but that's no help. Because the caller id doesn't show anything I can't even report them.
I remember in the past calling a number and before my call would go thru I would have to enter my phone number so the party I was calling knew who was calling them. That is what I want to do. I want to block all calls from "no caller id" "number unavailable" Just FYI my phone is an IPHONE 5 and I am on Verizon.
Any help would be appreciated.
Thanks

itbitybob, good day!
Thank you for taking the time to reach out to us today. I know how frustrating it can be getting phone calls from "no caller id" numbers. We do have an option that is called Family Base that will allow you to block unknown numbers, private numbers, or caller id. This link will provide you with the full details of this option. http://vz.to/1gIklla I hope this is able to answer your question. If you have further questions please feel free to reach back out to us at any time.
KevinR_VZW
Please follow us on Twitter @VZWSupport

Data manager package log does not show Global variables!!

Hello Experts,
We are using BPC 10 sp14 Microsoft version with SQL Server 2008 R2. We are seeing an issue where datamanager package log does not show the Global variables defined in package script whereas in BPC 7.5 Global variable were visible in package log.
Please let us know is this behavior changed in BPC 10?
Below is the package script having Global variables and Package log not showing any of them.
Thanks & Regards,
Rohit
Package Script:
Package Log:

Hi Ergin,
As far as I remember it's by design...
Vadim

Call log does not work. Iphone 4

Hi, I'm an Iphone 4 user, software currently on IOS 6.1.3, updated a couple of weeks ago.
Everything's fine and all, though one major problem that's been persisting - the call history is not working. Whenever an oncalling call (regardless if it's someone in my contact list or not) comes, the call log does not record the number and the entire log remains blank. I've tried resetting the settings as well as 'hard reset', but neither of these two have worked.
It's become absolutely frustrating, especially when I sold items off at Trademe and can't even track the phone numbers of anyone that gives a call saying they want to buy something (for the moment, I've currently got all pages saying that anyone interested should text my number, but as always, someone ignores that and just calls anyway). Not to mention it makes it a particularly big headache for work purposes as well and it obviously can't go on like this forever.
It'd be really appreciated if anyone can come up with a solution that can resolve this issue.
Thanks.

meehow wrote:
..I just upgrade my E52 from 034.001 to 052.003 and noticed that 'call log' function does not work anymore. The symptom is that nothing happens when pressing:
- "green" call button,
- Log option from the main menu,
- missed calls from the desktop.
I had to switch the phone to active Standby Mode which I never used before - this is the only way to see missed calls - the small "pop up" on the desktop.
Any suggestions how to fix it? Is it a known issue?...
I don't know how widespread your experience is but it is not universal as all the functions you describe work correctly for me with an E52 and 052.003 firmware.
Even if the upgrade reverted the log settings for Log Duration to "None" the "Green" key and the Log menu icon should bring the log up but with it empty, of course.

My call log is not maintaining and observed some are disappear ??? Ie both dailed and received also, My call log is maintaining and observed some are disappear ??? Ie both dailed and received also

My call log is not maintaining and some are missing in middle dates both dailed and received also.

Recent calls is set 100 calls that's includes dialed and missed call

Redo log backups not showing

Dear all
In DB12 tcode when i click following buttons
1) Last successful backup,
2) Overview of database backups,
3) Overview of redo log backups
not showing any logs
please reply

Hello
previous problem was solved, one of the table locked, i have unlock the table using SM12 , after that i have scheduled the back up immediately, it was giving me following error
BR0278E Command output of 'C: && cd C:\oracle\IDE\ora92\database && C:\usr\sap\IDE\SYS\exe\run\brtools.exe -f printarg initIDE.ora spfileIDE.ora C:\usr\sap\IDE\SYS\exe\run\brtools.exe -f detach cpio -pdcu F:\IDES_Backup\IDE':
BR0252E Function CreateProcess() failed for 'cpio -pdcu F:\IDES_Backup\IDE' at location BrProgDetach-8
BR0253E errno 2: The system cannot find the file specified.
BR0265E Execution of program 'cpio -pdcu F:\IDES_Backup\IDE' failed
BR0279E Return code from 'C: && cd C:\oracle\IDE\ora92\database && C:\usr\sap\IDE\SYS\exe\run\brtools.exe -f printarg initIDE.ora spfileIDE.ora C:\usr\sap\IDE\SYS\exe\run\brtools.exe -f detach cpio -pdcu F:\IDES_Backup\IDE': 5
BR0222E Copying init_ora to/from F:\IDES_Backup\IDE failed due to previous errors

Phone List View: "Call Log" Option Not Available

I recently upgraded from BB 8830 to BB 9630. With the 8830, I was able to display my Call Log on the phone screen, but I can't seem to make it happen with the 9630. According to the User Guide for the 9630, I should be able to change the Phone List View field to "Call Log." However, "Call Log" does not appear in the drop-down list of options on my BB. My choices are Most Recent, Most Used, and Name. What am I missing? Please help!

If this were possible, there would be a setting for this.
Not possible.

S660 call logs are not sorted.

I have a S660 smartphone and the call logs are not sorted based on time. It is randomly logged and its difficult to see the call history. Any fix for this?
~Senthil
Solved!
Go to Solution.

I got some alternative solutions..
1. download "Contact plus" app from google play free. This app is fantastic. phonebook, call log and messages contain in this pack. 3-in-one.. start using this app and make it default. it has its own dialer too... so do not have to worry about anything lenovo provided..
2. for those facing "menu" Switch not there issue: kindly download "KK Launcher" by google kitkat team from google play store.. this is the most beautiful launcher and u can forget the lenevo launcher--stupid bastards.. Make this launcher default too.
Remember one thing: do not delete or force stop or dissable the lenevo launcher or other apps by lenovo. just let it be there..do not use that.. thats it..
the above two apps solved 99% of my problems..
bbye...

I have an Iphone5s and use Verizon. Frequently when I am on a call, it sounds like there is an incoming call which does not show up in either call waiting or missed calls.

I have an Iphone5s and use Verizon. Frequently when I am on a call, it sounds as if there is an incoming call but it does not show up in call waiting or in missed calls. When I went to check on line, the fix involved a screen that I did not even have on my phone. Anyone else have this problem and is there a solution? I can't seem to get tech support at Verizon. Boo.

Hi Debsy1,
Thanks for the additional details! Let's get this issue resolved. What software version is the device on? Please reset the Network Settings on the device. Go to settings>general>reset>reset network settings. Please Note: Audio alerts may also indicate delivery of incoming text messages or emails. The tone will vary based on the type of information being delivered to the device. Tones may also indicate low battery charge or inadequate signal strength. Keep me posted with results.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Audit log is not showing any data GRC 10 PC

Hi,
when we are trying to execute the audit logs
under reports in process controls,not showing data and getting
error like no data matching the entere selec criteria.
do we need any configuration changes required
Thanks
GRC Admin

Hello,
check the table DBTABLOG if data contains or not,if no data then maintain the parameter rec/client in RZ11 and try the same
while executing the audit log need to maintain the time frame as HH:MM not HH:MM:SS
check the below link about DBTABLOG
Change Log Monitor Enabling by Table log Activation in SAP Production Environment - Governance, Risk and Compliance - SC…
Regards
Baithi

Hotsync Log does not show any information since August 2008. My Treo 755p has been syncing fine but nothing shows in the log!

I just noticed that when I am done syncing, the Hotsync Log does not have any information about the most recent operation. In fact the date of the last entry in the Log is August! Anyone know why this is happening and how to fix this?
Thanks.
Post relates to: Treo 755p (Verizon)

Now I know I've lost it--I'm replying to myself! Would you smart tech people please take a look at what I found and see if it means anything. Thanks!
Two more clues:
1) I was searching the Palm Knowledgebase and found out where the HotSync Log file is. When I open the file, using Explorer, this message pops up: 'To help protect your security, Internet Explorer has restricted this web page from running scripts or ActiveX Controls that could access your computer. Click here to...' If I allow it to run, the screen blinks but nothing seems to change. If I close the Log file and reopen it, it happens again. How can I stop this from happening to the file? Could this be the problem?
2) The Knowledgebase Article below tells how to create a new 'fake' log file to 'fool' the HotSync Manager. So I renamed the original log file, then created the new file as instructed. Then I did a HotSync. After the HotSync completed successfully, I opened the HotSync Manager and there is my new 'fake' log file that has only the words I typed into it when I created the file. Nothing in the Log about the operation at all!
Article ID: 38959 What does the error that ends with 'HotSync.log is missing' mean and how do I fix it?
The HotSync Manager is very particular: if it doesn't find things exactly as it expects, it won't work. One of the things it has to find in the right place is the HotSync log, a file where the HotSync manager records everything it does. See How can the HotSync log help me to troubleshoot HotSync problems? for more information about this file.
When you get this error, your HotSync Manager can't find the HotSync Log. This prevents you from performing a HotSync operation. Luckily, the HotSync Manager isn't too bright. Give it any file called HotSync.log and it will be happy again.
The easiest way to give it what it expects is to create a new text document, rename it, and put it in the folder where the HotSync Manager expects to find it. Here's how:
Launch the Windows Notepad. You can usually get to it by clicking on the Start Menu, choosing Programs, then Accessories and finally Notepad.
Type some text. You can type anything you want, as long as there's at least one character in the Notepad document.
From the File menu, choose Save As.
In the Save dialog, navigate to your user folder in the Palm or Handspring folder (find your user folder).
Name the document HotSync and click Save.
Launch Windows Explorer. You can get to it by double clicking on My Computer or by clicking on the Start Menu, choosing Programs and then Windows Explorer.
From the Tools menu, choose Folder Options.
Click on the View tab.
Uncheck the box next to Hide file extensions for known file types.
Navigate to your user folder.
Right-click once on the HotSync.txt document, and select "Rename" from the menu. Rename the file HotSync.log
Attempt another HotSync operation. If you still get the "HotSync.log is missing" message, contact Handspring.
Article ID: 38959 Article Type: Error, Troubleshooting, How To Date Created: Sunday, December 12, 2004 9:10:17 AM Date Modified: Friday, April 20, 2007 4:03:38 PM Relevant products: Treo 300, Treo 180, Treo 180g, Treo 270, Visor Edge, Visor Neo, Visor Pro, Visor Platinum, Visor Prism, Visor Deluxe, Treo 90
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)

Call log entry deleting shows error "invalid selec...

there are three entries in my nokia c3 call log when i delet them the error comes "invalid selection". i had cleared all logs but they still exists. i had reset my phone but still these entries exists in my call log. how can i delet these entries from my call log. and these contact entries are now not in my contact list. but there name exist in my call log without their number and date and call duration.

I get the same message with various JRE versions (1.3.1 Blackdown, 1.3.1 Oracle, 1.1.8 Oracle).
DBCA seems to die in line 124 (with the progress bar at 19%) where it uses oracle.sysman.assistants.dbca -> maybe this one is corrupt or wrong/outdated. Maybe it would be possible to save the database generation script (like in 8.x) as a batch and then run it manually without using Java-based tools. But: where do I generate this batchfile - dbca only seems to save a XML configuration file.
Thanks for any hints. Michael At least for the lat part of my question I found an answer: the option for writing a script with the DB geneation statements is not available for the 'General Purpose' DB. When selecting 'New database' it seems to work fine.
Michael

Placed calls and messages not showing on-line

I'm the account administrator of 2 lines so I can see calls and messages that the other line makes except I can't figure out why some do not show up. Can anyone help me with this?
Example: I was present when my family member received a call/hung up when it rang so I went on-line to see who was calling. No such time nor details. So I called another family member to see if that call would show up and sure enough it did.

Was the call actually connected? The family member answered the call and then the caller hung up?

At least one month call log history not save

i am using iphone5s and version is ios 7.0.4, this phone is not displayed at least one month ago call log history.
so plz tell me how can i solve this problem? if any apk available tell me aname or any setting about that problem plz inform me.
thnks

abhijitnmunje wrote:
give me a perfect solution
The only solution is that it only stores the last 100 calls. There are no settings to change that.

Call Logs do not show up on my Q10

Similar Messages

Maybe you are looking for