Call LSMW from a Module pool screen
Hi SAP gurus,
In order to call an LSMW from a module pool screen, there is a Function module which I have used earlier, but unable to recollect it. Can someone please tell me the FM which we need to use ?
Sudhakar,
Create an LSMW and assign it to a tcode and then call this tcode from the module pool program so that it will skip all the screens just by allowing the user to input the files and run the lswm.
Regarding the FM I have no idea.
K.Kiran.
Similar Messages
-
Regarding exit from the module pool screen
h experts,
i have developed a module pool report in which in the selection screen i have four fields which are mandatory ,when i execute the program without entering in the selection screen it do not allow to come out of the module pool screen ...what i want that without entering any input in the selection screen if i press exit button push button it will allow to come out of the screen for this what sud i do plz help me....Hi
keep a button called <b>EXIT</b> on the screen
Make the function type of that field as <b>E</b>
in Flow logic write
PROCESS AFTER INPUT.
Forced Exit from the transaction from screen
MODULE exit AT EXIT-COMMAND.
double click on exit module and
then in PAI write
*& Module exit INPUT
Exit from the Transaction
MODULE exit INPUT.
CASE okcode.
WHEN 'EXIT' OR 'CANCEL'.
CLEAR okcode.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " exit INPUT
<b>Reward points for useful Answers</b>
Regards
Anji -
Passing Data to Webdynpro from normal module pool screen
Hi,
I am working on a requireent, where I have a normal screen with some fields and a button. When I click on the button I want to navigate to the webdynpro screen and also pass the data from the screen to web dynpro.
Any suggestion is really appriciated.
Thanks
SanjayaHi Sanjaya,
DATA lv_app TYPE swfvtv-vval.
DATA lv_url TYPE string.
DATA lv_url_pre TYPE string.
DATA lv_url_suff TYPE string.
DATA lv_task TYPE swfvtv-task.
DATA lv_memid TYPE string.
DATA lt_param TYPE tihttpnvp.
DATA ls_param TYPE LINE OF tihttpnvp.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
Get Application Name.
lv_task = sworklist-external_type.
DATA lt_swfvtv TYPE TABLE OF swfvtv.
DATA ls_swfvtv TYPE swfvtv.
Get WD parameters
SELECT *
FROM swfvtv
INTO CORRESPONDING FIELDS OF TABLE lt_swfvtv
WHERE task EQ lv_task
AND vtyp EQ 'WD_ABAP'.
IF sy-subrc NE 0.
RAISE not_found.
ENDIF.
Create application name in PAPPL
Get namespace
READ TABLE lt_swfvtv INTO ls_swfvtv WITH KEY vpar = 'NAMESPACE' .
IF sy-subrc EQ 0.
CONCATENATE pappl ls_swfvtv-vval INTO pappl SEPARATED BY '/'.
ENDIF.
Get application name
READ TABLE lt_swfvtv INTO ls_swfvtv WITH KEY vpar = 'APPLICATION' .
IF sy-subrc EQ 0.
CONCATENATE pappl ls_swfvtv-vval INTO pappl SEPARATED BY '/'.
ENDIF.
Construct URL for application name.
lv_url = pappl.
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = lv_url
in_parameters = lt_param
IMPORTING
out_absolute_url = lv_url.
SPLIT lv_url AT '?' INTO lv_url_pre lv_url_suff.
IF lv_url_suff IS NOT INITIAL.
CONCATENATE '&' lv_url_suff INTO lv_url_suff.
ENDIF.
CONCATENATE lv_url_pre '?sap-client=' sy-mandt '&sap-language=' sy-langu lv_url_suff '&WI_ID=' sworklist-external_id
INTO lv_url.
Create window for application.
lo_api_component = wd_this->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window = lo_window_manager->create_external_window(
url = lv_url
has_menubar = abap_false
has_toolbar = abap_false
has_location = abap_false ).
lo_window->set_window_size( width = '700' height = '500' ).
lo_window->open( ).
This is the code to generate the URL for a Web Dynpro Application.
modify the code according to need.
Hope this will help you.
Thanks &Regards,
Arvind
Hey i dont know why is this coming like this when posted.
Copy-paste this in modify in editor.
Edited by: Arvind Patel on Jun 16, 2010 2:35 PM -
How to call program in the Module pool screen
hi ,
i am having 2 screen when we press enter in first screen we will go to second screen in second screen i want to call a standard ALV program but second screen is already having some fields i want tthis report in down part of the screen
please help me for that
Edited by: ankita12345 on Nov 19, 2009 12:27 PMHi,
Its your choice. If you want a ALV display, then create a custom container and display data like this
DATA: custom_container1 TYPE REF TO cl_gui_custom_container.
IF custom_container1 IS INITIAL.
CREATE OBJECT custom_container1
EXPORTING
container_name = 'CUST_CONT1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CREATE OBJECT grid1
EXPORTING
i_parent = custom_container1
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD grid1->set_table_for_first_display
CHANGING
it_outtab = t_itemdetails[]
it_fieldcatalog = t_itemfc
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
If you want to have a table control, then you can do so. Search the SDN, you will find loads for your reference. -
How to create select-options on module pool screen
Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks. -
Call module pool screen from ABAP Webdynpro
Hi All
I designed one screen in normal classical dynpro in SE80 for module pool program. I want to call that screen layout design in webdynpro view layout.
So please help me how can i call that module pool screen from my ABAP webdynproHi
Thank you for your great replay. But Mr Ramakrishnappa and Mr Katrice as your reference i go through that but when i insert the program name and screen number program is end with a run time error saying
dynamic type conflict when assigning reference.
Please refer the below snap shot -
Copying from report output to a module pool screen
Hi to all experts
My requirement is to call a transaction when i click a button in module pool programme .when i execute that transaction an alv report is displayed and user selects some records that should be copied over to the module pool screen.Yous should use ALV OOps concept to capture the selected data in the ALV report , and once you return back you can update yr module pool .
-
Trigger a workflow from module pool screen at save button
Hi,
I am new to workflow.Please help me.My requirement is trigger a custom workflow from module pool screen at save button.
Scenario is: Create a Z screen for material creation and after pressing save button workflow should trigger to approver and approver emailid should be fetch from Z table and have to provide a link in work flow for Z t-code which displays a report of material pending for approval..
Please suggest me process how i can acheive this..
ThanksHi,
If you're using standard bapi's to save the material, you can then use either the standard events which are already triggered or you coul add a change document for material changes or creation.
Then this event can be the trigger of your custom workflow.
Kind regards, Rob Dielemans -
How to use table maintenance view in module pool screen
hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.You can simply call it via SM30. Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
exporting
action = 'U'
view_name = 'Z_Table_Name'
exceptions
client_reference = 1
foreign_lock = 2
invalid_action = 3
no_clientindependent_auth = 4
no_database_function = 5
no_editor_function = 6
no_show_auth = 7
no_tvdir_entry = 8
no_upd_auth = 9
only_show_allowed = 10
system_failure = 11
unknown_field_in_dba_sellist = 12
view_not_found = 13
others = 14.
Regards,
RIch Heilman -
How to insert tabstrip control in module pool screen painter
Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT -
Displaying MIR4 attachment list TIF image in module pool screen
Hi All,
I have a screen with a custom container and I tried to call a TIF image from MIR4 which is in attachment list(which is stored in archived link).
I need a function module to display this image in my Module pool screen using the container.
I tried using below code
* Create controls
CREATE OBJECT container_1
EXPORTING
container_name = 'CONTAINER'.
* create object container_2
* exporting container_name = 'PICTURE_CONTROL_2'.
CREATE OBJECT PICTURE_CONTROL_1
EXPORTING
parent = container_1.
* CREATE OBJECT PICTURE_CONTROL_2 exporting parent = container_2.
CALL METHOD PICTURE_CONTROL_1->LOAD_PICTURE_FROM_URL
EXPORTING
* URL = 'SAPR3://984BE16932C81EE3B2AA1E3B0D12C6FF'
* URL = 'file://E:\Personal\New_Passport4.jpg'
* URL = 'SAPR3://984BE16932C81EE3B2BDF8E44B035648.TIF'
*URL = 'SAPR3://SAPR3CMS/get/100/Z1/984BE16932C81EE3B2BDF8E44B035648//.TIF'.
URL = 'SAPR3://WebRepository/0020698212/DEMOWORD97SAPLOGO?Version=00000'
IMPORTING
RESULT = lv_result.
CALL METHOD PICTURE_CONTROL_1->set_display_mode
EXPORTING
display_mode = PICTURE_CONTROL_1->display_mode_fit_center.
But I am able to display this URL = 'SAPR3://WebRepository/0020698212/DEMOWORD97SAPLOGO?Version=00000' and not able to display my archive link image which is in TIF.
note: Display image of Arc.link Doc.type ZBUSI_TIF (doc.class TIF)
Please help me on this.
Thanks
Geetha CharanHi sai,
Please refer th procedure.
For the select-options you might have defined a selection screen.
Next you can fetch the entire data that you wanted to display in a module pool into an internal table.
you can call the screen you defined for o/p upon the selection.
Then, You define a screen XXXX and a table control in the scree, and in the PAI module of the screen
you write a chain end chain processing in which you can display the contents of your internal table.
OR
if you want the selection also to be in the module pool, then for displaying the O/P you can definr a sub-screen of the initial screen and you can call that sub-screen on selcting, which can be done with a function code.
Hope this helps -
Display Continuous Fluctuations in Input Data in Module Pool Screen
Dear All,
We are working on a Weighbridge Interface scenario, where the weighbridge is sending data to a digitizer, which is connected to the COM port of a PC. The objective is to read the data from the digitizer, and display in a Module pool screen. However, there is one more requirement: the weight may fluctuate until it stabilizes, and the fluctuations have to be displayed on screen. For example, the tare weight of a vehicle may be 12.4 TON, but when the vehicle is standing on the weighbridge, the weight may vary from 10.4 to 12.4 TON. The idea is to capture the stable weight, so that any discrepancies can be avoided. In the current IT system implementation, the fluctuations in the weight are displayed. But using ABAP, can these fluctuations be captured? For example, we may design a screen containing a field for capturing the weight, and the weight displayed there automatically refreshes as soon as there is a change in the digitizer reading. Is this possible to achieve? If so, how?
Awaiting answers.
Thanks and Regards,
SidHi Sid,
just a suggestion for the refreshing of an ABAP screen: you can use class CL_GUI_TIMER, but it only handles whole seconds, i.e. 1 second, 2 seconds and so on, but not 0.5 seconds...
An example of an ABAP listing could be the following:
*& Report ZZAVV001
REPORT zzavv001 NO STANDARD PAGE HEADING.
CONSTANTS: c_yes(1) TYPE c VALUE 'X'.
DATA: BEGIN OF t_bseg OCCURS 0.
INCLUDE STRUCTURE bseg.
DATA: END OF t_bseg.
data: d_num_bkpf type i,
d_num_bseg type i.
PARAMETERS: interval TYPE i DEFAULT 5. "meaning 5 seconds
* CLASS lcl_receiver DEFINITION
CLASS lcl_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_finished FOR EVENT finished OF cl_gui_timer.
ENDCLASS. "lcl_receiver DEFINITION
* Global data
DATA:
test TYPE i,
receiver TYPE REF TO lcl_receiver,
timer TYPE REF TO cl_gui_timer.
START-OF-SELECTION.
CREATE OBJECT timer.
CREATE OBJECT receiver.
SET HANDLER receiver->handle_finished FOR timer.
timer->interval = interval.
CALL METHOD timer->run.
PERFORM load_data. "or whatever you have to do to read the weight
PERFORM show_list. "or whatever you have to do to print the weight you've read
* CLASS lcl_receiver IMPLEMENTATION
CLASS lcl_receiver IMPLEMENTATION.
METHOD handle_finished.
PERFORM carga_datos.
PERFORM muestra_listado.
CALL METHOD timer->run.
ENDMETHOD. "handle_finished
ENDCLASS. "lcl_receiver IMPLEMENTATION
*& Form load_data
* text
FORM load_data.
clear: d_num_bkpf,
d_num_bseg.
select single count( * )
into d_num_bkpf
from bkpf.
select single count( * )
into d_num_bseg
from bseg.
ENDFORM. "load_data
*& Form show_list
* text
FORM show_list.
get time.
skip to line 1.
position 1.
write: / 'Date / Time:', sy-datum, sy-uzeit.
write: / 'Number of BKPF records:', d_num_bkpf.
write: / 'Number of BSEG records:', d_num_bseg.
ENDFORM. " show_list
Okay, it's just a tiny code snippet, but I hope it may help you by designing auto-refreshing screens.
Kind regards,
Alvaro -
Module-pool screen field value under POV event
Hi All,
I have one issue...please suggest me solution for this.
In module-pool program i have one screen(1000) which has one field(hrname_1000).
Under this event:
PROCESS ON VALUE-REQUEST.
FIELD hrname_1000 MODULE hrname_1000.
under this module hename_1000 i have used F4IF_INT_TABLE_VALUE_REQUEST to put a search help for field hrname_1000.
after that i am trying to retrive HR related stuff's based on the field on module-pool i.e i am using hrname_1000 in the where condition.
but problem is that im not getting value for hrname_1000 which im giving in the module-pool screen.
thats y my select query is not working.
Where as im getting values for the hrname_1000 under PBO & PAI.
It will look like below.
PROCESS ON VALUE-REQUEST.
FIELD hrname_1000 MODULE hrname_1000.
(under the above module)
SELECT DISTINCT ename plans FROM pa0001 INTO CORRESPONDING FIELDS OF TABLE itab WHERE stell = '50001026'.
LOOP AT itab INTO wa WHERE ename = hrname_1000.
ENDLOOP.
Please suggest
Thanks & regards
AnsumeshIn some of the cases the screen field is present in the screen but not holding the value in the required structure or field.
so here u need to check the option of reading the screen field values explictly..
//once u hit an enter and do the f4 i think the value will be there ...but if u dont hit enter and do an F4 the value cannot hold and i think u r in this case ..
1.Fill the screen field name in the structure dynpread.
DATA: BEGIN OF DYNP_VALUES OCCURS 10.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF DYNP_VALUES.
DYNP_VALUES-FIELDNAME = 'HRNAME_1000'.
APPEND DYNP_VALUES.
* read screen values
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = HELP_REPID "call the repid of ur prog
DYNUMB = HELP_DYNNR "pass the screen number
TABLES
DYNPFIELDS = DYNP_VALUES
EXCEPTIONS
OTHERS = 1.
now dynp_values hold the field name and field value of the screen .
now
SORT DYNP_VALUES BY FIELDNAME.
READ TABLE DYNP_VALUES WITH KEY 'HRNAME_1000' BINARY SEARCH.
IF SY-SUBRC EQ 0.
HELP_XXXX = DYNP_VALUES-FIELDVALUE. "store the value into a variable
TRANSLATE HELP_XXXX TO UPPER CASE.
ENDIF.
Now check the code with the value if its getting populated which once there will make ur select work ..
Vijay.. -
Variants for module pool screena
Hi,
I tried creating a variant for module pool screen by using the FM : RS_CREATE_VARIANT.
For this i created a dummy report which has the same parameters as the fields in the screen.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
EXPORTING
report = gc_dummy_rep
variant = 'variant5'
MOVE_OR_WRITE = 'W'
NO_IMPORT = ' '
EXECUTE_DIRECT = ' '
IMPORTING
SP =
tables
L_PARAMS =
L_PARAMS_NONV =
L_SELOP =
L_SELOP_NONV =
valutab = lt_params
OBJECTS =
FREE_SELECTIONS_DESC =
FREE_SELECTIONS_VALUE =
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
but when i try to retrieve the values stored in the variant using FM : RS_VARIANT_CONTENTS.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
EXPORTING
report = gc_dummy_rep
variant = 'variant5'
MOVE_OR_WRITE = 'W'
NO_IMPORT = ' '
EXECUTE_DIRECT = ' '
IMPORTING
SP =
tables
L_PARAMS =
L_PARAMS_NONV =
L_SELOP =
L_SELOP_NONV =
valutab = lt_params
OBJECTS =
FREE_SELECTIONS_DESC =
FREE_SELECTIONS_VALUE =
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I get an error message : variant5 not found.
is there anything that i miss here?
or is the way i use to create variant for module pool screen not right?
Regards,
KaminiHi,
To avail save variant option in module pool screen,
1. You need to create a data base table similar to INDX table with the fields RELID, VARI_NAME
PROG_NAME
UNAME
SRTF2, MEMORYID, CLUSTR, CLUSID. And the remaining fields can be anything.
2. Enable the Save button in the Function keys part of GUI Status. And Add a push button for Get variant.
3. When Save button clicked call a screen with a single field for variant (let us say g_var). After g_var entered, in the PAI of the initial screen export all the screen values to the created database index using the statement .
EXPORT: g_characteristics_tab TO DATABASE zav0257(ch) ID g_var,
s_auart TO DATABASE zav0257(au) ID g_var.
So that the values will be exported to database.
Then update the fields(VARI_NAME,PROG_NAME,UNAME) of the database table using modify from work area.
So that you will have the history of variance existence.
4. Next time , when the user clicks on Get Variant option, call another screen to enter the variant name. Then import the values for that variant from the memory id in the database table.
It worked for me. -
How to add logo in module pool screen
Hi Expert,
I need to display company logo in the module pool screen
how this can be added ?
Regards
BikasHi,
create a custom control called 'CUSTOM_CONTROL'
CONSTANTS: CNTL_TRUE TYPE I VALUE 1,
CNTL_FALSE type i value 0.
data:h_picture type ref to cl_gui_picture,
h_pic_container type ref to cl_gui_custom_container.
data: graphic_url(255),
graphic_refresh(1),
g_result like cntl_true.
data: begin of graphic_table occurs 0,
line(255) type x,
end of graphic_table.
data: graphic_size type i.
data: g_stxbmaps type STXBITMAPS,
l_bytecnt type i,
l_content TYPE standard table of bapiconten initial size 0.
g_stxbmaps-tdobject = 'GRAPHICS'.
g_stxbmaps-tdname = 'ENJOY'.
g_stxbmaps-tdid = 'BMAP'.
g_stxbmaps-tdbtype = 'BMON'.
call function 'SAPSCRIPT_GET_GRAPHIC_BDS'
exporting
i_object = g_stxbmaps-tdobject
i_name = g_stxbmaps-tdname
i_id = g_stxbmaps-tdid
i_btype = g_stxbmaps-tdbtype
importing
e_bytecount = l_bytecnt
tables
content = l_content
exceptions
not_found = 1
bds_get_failed = 2
bds_no_content = 3
others = 4.
call function 'SAPSCRIPT_CONVERT_BITMAP'
exporting
old_format = 'BDS'
new_format = 'BMP'
bitmap_file_bytecount_in = l_bytecnt
importing
bitmap_file_bytecount = graphic_size
tables
bds_bitmap_file = l_content
bitmap_file = graphic_table
exceptions
others = 1.
call function 'DP_CREATE_URL'
exporting
type = 'image'
subtype = cndp_sap_tab_unknown
size = graphic_size
lifetime = cndp_lifetime_transaction
tables
data = graphic_table
changing
url = graphic_url
exceptions
others = 4 .
create object h_pic_container
exporting container_name = 'CUSTOM_CONTROL'.
create object h_picture exporting parent = h_pic_container.
call method h_picture->set_display_mode
exporting
display_mode = cl_gui_picture=>display_mode_normal.
call method h_picture->load_picture_from_url
exporting url = graphic_url
importing result = g_result.
or you can check the program RSDEMO_CUSTOM_CONTROL
check link :
How to insert Image on Screen
thanks
Parvathi
Maybe you are looking for
-
Hello, Can someone tell me what is the data rate supported by PCI 6533. i mean transfer the data from peripheral to the hard disk of the PC.
-
[SOLVED]"permission denied" when building pkg
most consistantly, I get the error when a pkgbuild has the line: ./autogen.sh in building linphone-git, mediastreamer-git and ortp-git another time, I got burned with the line: ./system.tmp from building wiimms-iso-tools and the last pkg I tried to b
-
Trying to assign refference pernr
I am on ERP 2004 without concurrent employement or Global Employee Management implemented. I have a single employee with a pernr in US and a pernr in Canada. I am trying to assign a reference pernr to each so they will be linked in HRP1001 by a centr
-
HT4718 An error. Occurs while trying to run this installations
I Have bought a second hand MacBook Air from a friend, we have been unable to re install maverick o sx, an error occurs during the verification process. any advice?
-
Comment acheter une application au mexique avec un compte du canada
Bonjour Apple, j'ai un problème avec des cartes itunes. J'ai acheter au Mexique trois cartes itunes: 2 de 600 pesos et 1 de 300 pesos. Quand je suis arriver je suis arriver pour entrer le code il mon dit que le code devait être utiliser dans un store