Call Manager 5.0 and Unified Videoconferencing 3515 MCU, 12 Video Ports

Hi!
Could anybody tell which service contract should customer buy to get replacement, hardware/software update and support for the
1. MCS7835H1-K9-CM50 HW/SW Unified CallMgr 5.0 7835-H1 Appliance, 0 Seats
2. LIC-CM5.0-7835-H1= License CallMgr 5.0 7835-H1 Appliance
3. IPVC-3515-MCU12 Unified Videoconferencing 3515 MCU, 12 Video Ports.

Service contracts seem to be still not available for CCM 5.0 and new IP/VC products, as far as I can see.

Similar Messages

  • Cisco Call Manager 8.5 and Lync 2013

    Dear all,
    Our customer wants to integrate their Lync 2013 to the Cisco Call Manager 8.5.
    Out of some not so recent information i thought that if u want to use the enterprise voice of lync you'll have to make a sip trunk between Cisco Call Manager & Lync 2013.
    I think that this still counts, i've also heard that there have been a moderate amount of changes between cucm 8.5 and cucm 8.6 on matters of sip.
    I'm unable to find them though, also what does CUCI - Lync do?
    Kr,
    Yannick Vranckx

    Hi Yannick,
    There can be three types of integrations between Lync and Cisco Systems
    1)      Direct SIP Trunk between Lync Server and Call Manager - In this, we can setup shared line between Cisco extensions and Lync extensions, and Sip trunk between the servers. Any Cisco phone / Lync client  can call each other vice-versa. Initial setup needs planning, but later it does not need much configurations in client side. The following document explains the configurations needed.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucilync/9/CUCI_BK_C0B36AC1_00_cisco-uc-integration-for-microsoft.pdf
    2) CUCILYNC, which is like Cisco Jabber client but connects with Lync and Call Manager: Lync Client <----> CUCILYNC <-----> CUCM
    In this option, a plug-in is installed in each client side. Although initial configurations is easier, each user needs to install the client and operate it. The below document explains the configuration and setup.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucilync/9/CUCI_BK_C0545A41_00_cisco-uc-integration-for-microsoft.html
    3) RCC (Remote Call Plugin) which just provides basic call control feature but for that you need Cisco Unified Presence Server: Lync Client <----> CUPS <-----> CUCM
    HTH
    Manish

  • Cisco Call Manager 5.1 and Cisco VoIP Gateways

    Hi,
    I have Cisco Call Manager 5.1 with Cisco 2800 series routers as a ISDN gateways and Cisco VG224/ATA 186 as POTS gateways. While Cisco Call Manager collects call statistics from 7900 series SCCP handsets managed by the Call Manager (number of VoIP packets, dropped frames etc.), it shows only one side of the call as it does not collect statistics from the Cisco routers (configured as H.323 gateways), the Cisco VG224 (with ports configured as H.323 gateways and as a SCCP devices) and Cisco ATA 186 (configured for SCCP).
    Is the collection of these statistics possible? What needs to be done?
    Thanks,
    Paul

    Update: Logging of QoS/Call Management Records (CMR) to Call Manager CDR database is not possible with H.323 gateways; only MGCP gateways:
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a008020650a.shtml#qa4
    Anyone know how to get the Cisco router gateway to log these statistics anyway using standard router logging mechanisms (e.g. syslog)?
    Anyone know about calls to SCCP ports on Cisco VG224 or ATA 186?
    Thanks,
    Paul

  • Cisco Call Manager MIB and OID.

    Hi,
    One of our customer has developed their own NMS software to manage multiple OEM products.
    They want to integrate Cisco Call Manager 7.0 and Cisco Router with the NMS software for monitoring/managing of Voice traffic.
    The monitoring of CUCM 7.0 will consists of the following-
    1. Call History
    2. Missed calls.
    3. Calls in progress,
    4, Dropped Calls.
    The Monitoring of Cisco Router will Consists of Interface statistics and Portwise Traffic statistics of LAN and WAN Ports.
    I believe this monitoring is done through Call Detailed Record and if I will load the CDR MIBs in NMS software it will be able to log CRD logs from CUCM 7.0.
    Please suggest that if the same is possible.??.
    kindly help me in getting the MIBs/OIDs for the same.
    Best regards,
    Puneet K.

    Hi,
    For 200+ users you should better go with Cisco CallManager (CUCM). Although ISR G2 supports 250+ users, it will not provide clustering mechanism and additional HA capabilities as CUCM does.
    You can read the Call Processing chapter of the CUCM SRND:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/9x/callpros.html
    Hope to help, please remember to rate helpful posts.
    Kind regards,
    - Adrian.

  • Ringtones and background images not available after call manager upgrade

    Hi,
          We have upgraded our call manager from version 8.5 to 10.5.  Once after the upgrade we lost all the Ringtones and background images except the two default ringtone and background images.  we got 8945 sccp phones(running 9-3-1 firmware) and 9951 sip phones(running 9-4-1 firmware).  Both these phones lost these list.  However the ringlist.xml is available in the tftp server with all the ringtones and the phones are pointed to the right tftp servers.  I tried to restart the tftp servers and tried again, however that didn't help.   we are using call manager 10.5 and h323 voice gateway.  Could anyone please help on this.
    Thanks
    Barry

    Hi Tony,
         I can see the ringtone files in the call manager (osadmin>tftp file mgmt), i have also restarted the tftp services, but it didn't help.  I believe you advised to re-upload the ringlist file (Ringlist.xml) and try again. I will try this and update you.  Please let me know if you have any other suggestions.
    Thanks
    Barry

  • Call Manager will not activate in CUCM 7

    i have installed cucm 7 and can get to it with windows IE, but when i try to activate call manager in the cisco unified servicability it give me this error:
    Update Failed for the Service(s): Cisco CallManager Request unsuccessful to license manager(Please check the Licensing logs for further details)
    i can not add any phones or do anything.
    can someone help.

    Hello Sanil,
    You have to check your services on your publisher and subscriber , or you  can use ssh and login to your publisher and check if the replication   between your pubisher and subscriber is perfect or not. Most likely services not started yet.
    Br,
    Nadeem

  • Cisco Call Manager Administration Page Drop down menu not working

    I'm running the mobile app browser on my Xoom tablet and when I log into Cisco Call Manager Administration page I get the menu's but it will not pull down the options. The same issue happens in google chrome. I use your browser on my desktop and have no issues logging into Cisco Call Manager Administration page and getting the drop down menu's to appear but the mobile version of your browser is not working. Is there a work around? I tried changing the UAString to Desktop, iPad etc and the issue is still there.

    Thanks but I've tried all that. It happens in Chrome also. I've tried Opera and it works on that. I've read other forums and it looks like a Java script issue that Chrome and now Firefox Mobile cannot seem to resolve. My preference is Firefox and I'm sure as more tablets get out then this will be solved at some point. I just don't know how it is prioritized. I do know that in order for Androids to be viable in the business sector they need to address issues like these with a higher priority.

  • Cisco ip phone 7960 cannot connect to call manager express

    The 7960 ip phone seems not to connect to the call manager express
    router and i have already put the firmware and configured the tftp
    server,the rest of the phones the 7911`s are all working ok,i have tried
    to reset the phone but it doesnt respond to the # key so as to reset to
    factory defaults.
    I have tried all the options of resetting it but to no avail.
    could someone give me some techie tips on this ? could it be a hardware issue ?? please assist.

    Go to the phone and check if the TFTP server is correct (should be the CME IP address). Also check the DHCP address.
    Resetting 7900 Series IP Phones to Factory Defaults:
    http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a00800941bb.shtml
    Check the bug:
    CSCed93627: Not able to reset 7970 back to factory defaults

  • Integration Call Manager with Microsoft's tools

    Hello,
    My costumer has call-manager 5.1 and Cisco Unity 5.0 (voice e-mail only) working perfectly on his company.
    Besides, he has Microsoft Outlook 2007 and MS-Office Communicator with presence server.
    He wants to use MS's tools integrated with Cisco call-manager.
    Ex
    Listen to voice e-mails directly on Outlook 2007 and on UNITY.
    Use office communicator (presence) according to the status of user's phone; also implementing functions like "click-to-dial".
    Is there any kind of software or license that I should get from Cisco to implement these functions?

    Please I need help.

  • E1 no voice on Cisco Call Manager version 6

    Hello,
    We are running Cisco Call Manager with MGCP and E1 connection to a Siemens PSTN
    We have started experiencing no voice when calling to Siemens or calling from Siemens to Cisco. The call goes through but there is no ring tone and no voice when the call is answered.
    Also, I noticed that MGCP fails back to our Sub sometime, but I am not sure if these issues are somehow related
    How can I troubleshoot voice problems with E1?
    Thank you

    Hi fgasimzade,
    Can you check with Siemen what channel order do they follow.
    Cisco VG follows descending order for outbound calls and expect ascending for incoming calls.
    You can toggle config using below commands
    interface SerialX/Y/Z:15
    isdn bchan-number-order {ascending | descending}.
    HTH,
    Regards,
    Mohammed Noor

  • Time Difference In Between Call Manager & IP Phone

    Hello,
    We remove the NTP server from the Call Manager 6.5 and configure manual  TIME setup on the CUCM but the IP Phone showing 7 minutes difference.
    We reset and restart the Phones not no effect. What other thing we can do to accomplish this issue.
    Thanks,

    Hello,
    I remove the NTP Server IP Address information from the OS Administration NTP configuration.
    Output for the Command
    admin:utils ntp status
    ntpd (pid 32278) is running...
         remote           refid     st t when poll reach   delay   offset jitter
    ==============================================================================
    *127.127.1.0     127.127.1.0     10 l   54   64 377   0.000   0.000   0.015
    172.16.1.51     0.0.0.0         16 u   - 1024   0   0.000   0.000 4000.00
    synchronised to local net at stratum 11
       time correct to within 11 ms
       polling server every 64 s
    Current time in UTC is : Mon Nov 4 07:23:48 UTC 2013 Current time in Mideast/Riyadh89 is : Mon Nov 4 10:30:52 zzz 2013

  • Cisco Unified Contact Center Express 8.5 and Call Manager 8.5 on single ESXi

    Does Cisco support 2 virtual machines (on ESXi), one for Cisco Unified Contact Center Express 8.5 and one for Call Manager 8.5?
    I have blade ucs b200.
    Thanks a lot, Svetomir

    Yes it is supported. Check this out http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines#Sizing_Examples
    GP.
    Pls rate helpful posts by clicking on stars below the post !!

  • Integrating the IPVC-3515-MCU with Call Manager

    I am looking for some help on how to integrate the IPVC-3515-MCU with Call Manager.
    Thanks

    Hi,
    What is your CUCM ver? CUCM 7.x has a new feature where even if VCB is the first bridge in MRGL, if all parties are audio it will select an audio CFB instead of the VCB.
    Now, if you don't have CUCM 7.x than please confirm that the VCB has the higher priority in the MRGL. The MRG with the VBC should be at the top of all other MRG (which have CFB in it) in the MRGL. If you have audio CFB and VCB in the same MRG than CUCM will select the least used conf bridge and this could be the audio CFB.
    Try and keep the audio CFB and the VCB in different MRG so this way you can influence the priority of conf bridge in the MRGL. Also, make sure that the user who is initiating the conf has this MRGL.

  • What is the recommended Delay/Latency between Call manager and The SRST setup

    Hi ,
    Need to understand the readability between the CUCM and SRST.
    What is the recommended Delay/Latency, Bandwidh  between Call manager and The SRST gateway setup.
    Regards,
    Velu S

    Hi Manish,
    I've been struggling to get this information and what I could understand from the SRND is that this 80ms is just related to the Intra-Cluster communications (Between Servers UCS), there is no relation with SRST Gateways:
    "The maximum one-way delay between any two Unified CM servers should not exceed 40 ms, or 80 ms round-trip time."
    From that I assume that the RTD between the SRST and the Cluster should be based on the affirmation below:
    "If a voice service is hosted across a WAN where the one-way latency is 200 ms, for example, users might experience issues such as delay-to-dialtone or increased media cut-through delays. For other services such as presence, there might be no problem with a 200 ms latency."

  • Outlook and Unified Communications Manager 6.1.2 Plugins

    Is there any plugins similar to the Microsoft Connector for CME but for Unified Call Manager? Customer would like screen pops for outlook contacts and be able to dial outlook contacts.
    Anyone know of a Cisco product that can do this in version 6.1.2?

    Hi Todd,
    Hae you looked into Communications Manager "Click to Call"?
    http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/click_to_call/7.0/english/install/guide/C2C1chapter.html
    Hope this helps!
    Rob

Maybe you are looking for