Call Manager - Phone register & unregister

How can we be informed if a phone unregisters from call manager? Can we see it in the Real Time Monitoring Tool or snmp ?
Thanks

Wrong, there is still app log in any linux appliance.
You access it thru RTMT
HTH
java
if this helps, please rate

Similar Messages

Call Manager Phone Services to Personal Address Book

Cisco Forum:
I'm trying to configure Call Manager (8.6.2.x) for Phone Services so that we can use the IP Phone's Service button to access the Personal Address Book & Fast Dials. While I have the option (Test PAB-Fast Dial) appearing when the Services button is selected, the process ends with the bottom screen shot showing "Error in Authentication."
By using the Directories button then selecting the Personal Address Book, I can successfully log into the application.
What am I missing? Below is the current URL being used.
Thank you.
Dan
http://10.2.5.234:8080/ccmpd/login.do?name=#DEVICENAME#&service=pab

Nelson:
The URL that is working for us is:
http://10.2.5.234:8080/ccmpd/pdCheckLogin.do?name=#DEVICENAME#&service=pab
then use your own IP address for the Call Manager node.
Our Call Manager configuration is shown below.
To access the feature, we hit the Services Button, are prompted with a Personal Address Book option, select it, then are promoted for a UserID/PIN (shown further below), at which point I enter my LDAP ID and a PIN. The PIN is created in Call Manager under User Management ==> End User ==> PIN.
Good luck with your process.
Dan

Call Manager phone directory

Hello,
I want to extract the phone directory from the call manager for one of the execs. I would like to find out what is the name of MSSQL database and the table where this information is stored.
Or, if there is a built in tool provided by Cisco that can be used to extract the info will work as well.
Thanks,
Shariq

You would find quiet a number of useful links on the Phone directory. Might help
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_tech_notes_list.html

MTP and CFB of call manager not registered

dears,
some thing strange is going on which i never face in my life. by default the mtp and cfb are registered but they are not registered while all other media ann and moh are registered
that's only for pub but sub all are working fine

is the run flag for MTP & CFB under "Cisco IP Voice Media Streaming" service parameter set to True?
can you try changing the device pool and reset it once please?

Phones getting unregistered frequently from call Manager

Hi
We have Call manager in our HQ and some phones in Branch in a different country. From CUCM there is a SIP trunk towards router in branch.
Users in branch occassionally complain of phones getting unregistered.HQ and branch are connected through internet with suffiecient BQ 14 Mbps on each side.
Thanks for helping me out.
Regards
Vibha

Hi Vibha,
You can check the Phone status messages to start with and also check the app / syslogs on the cucm corresponding to the time stamp when they are unregistered to see the reason code for the unregistered event. However, a packet capture would be ideal to check what exactly is causing the issue as we can see which packets are exchanged or getting dropped between cucm and IP phone.
HTH
Manish

A question about call manager traces for Sip phones.

So today I create a sip based ip communicator and pressed the new call button and heard a dial tone. I started typing my telephone number. Half way through, I heard another secondary dial tone (which indicates mis-configured route pattern somewhere) .
However, When I look at the call manager logs, I do not actually see the digits that I was typing. With SCCP, I can see the keypad button press messages in the traces, but here, I cannot see the pressed buttons in my CUCM traces. Can anyone help with telling me how I can see button presses going to call manager . All I can see are the logs below which came up as soon as I got the dial tone and the final sip invite messages. I see nothing in-between.
|SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.xx.4.xx on port 56714 index 31809 with 973 bytes:
[6387070,NET]
NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/TCP 10.x.x.66:56714;branch=z9hG4bK00005b1e
To: <sip:[email protected]>
From: <sip:[email protected]>;tag=00ffb00bc50a00340000499f-00006ab4
Call-ID: [email protected]
Date: Sat, 14 Feb 2015 14:17:40 GMT
CSeq: 19 NOTIFY
Event: dialog
Subscription-State: active
Max-Forwards: 70
Contact: <sip:[email protected]:56714;transport=TCP>
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
Content-Length: 350
Content-Type: application/dialog-info+xml
Content-Disposition: session;handling=required
<?xml version="1.0" encoding="UTF-8" ?>
<dialog-info xmlns:call="urn:x-cisco:parmams:xml:ns:dialog-info:dialog:callinfo-dialog" version="18" state="partial" entity="sip:[email protected]">
<dialog id="12" call-id="[email protected]" local-tag="00ffb00bc50a003300006390-00002d4f"><state>trying</state></dialog>
</dialog-info>
SIPStationD(12991) - processCommonDialogNotifyInd: Did 12 Sending Notified SIPOffHook to new Cdfc

Here is a more detailed explanation of how SIP calls notify cucm when they go off hook to make a call. The digit dialled here is 4080
+++++ Analysis of SIP Phone making a call +++++++++
The user picks up the phone and the IP Phone sends a NOTIFY to CUCM to indicate the start of a new dialog. This dialog begings by an offhook event
00869539.002 |14:58:13.837 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 976 bytes:
[46240,NET]
NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00002531
To: <sip:[email protected]>
From: <sip:[email protected]>;tag=544e42f26d0b001e000056e7-0000311c
Call-ID: [email protected]
Date: Mon, 16 Feb 2015 12:58:13 GMT
CSeq: 11 NOTIFY
Event: dialog
Subscription-State: active
Max-Forwards: 70
Contact: <sip:[email protected]:52910;transport=TCP>
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
Content-Length: 350
Content-Type: application/dialog-info+xml
Content-Disposition: session;handling=required
<?xml version="1.0" encoding="UTF-8" ?>
<dialog-info xmlns:call="urn:x-cisco:parmams:xml:ns:dialog-info:dialog:callinfo-dialog" version="10" state="partial" entity="sip:[email protected]">
<dialog id="6" call-id="[email protected]" local-tag="544e42f26d0b001d00007cc9-000044a3"><state>trying</state></dialog>
</dialog-info>
++++ CUCM SIP stack processes the new connection for the phone+++++++
00869540.001 |14:58:13.837 |AppInfo |//SIP/Stack/Info/0x0/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 2 (SIP_NETWORK_MSG), for event 1 (SIPSPI_EV_NEW_MESSAGE)
00869540.002 |14:58:13.837 |AppInfo |//SIP/Stack/Transport/0x0/sipTransportProcessNWNewConnMsg: context=(nil)
00869540.003 |14:58:13.837 |AppInfo |//SIP/Stack/Transport/0x0/sipConnectionManagerProcessNewConnMsg: gConnTab=0xe81c0d70, addr=10.50.16.1, port=52910, connid=2748, transport=TCP
++++ Next CUCM allocates a call id for this call +++++
00869546.002 |14:58:13.838 |AppInfo |LineControl(66) - Get call instance=1 for CI=24419584
+++Next CUCM sends a 200 OK to the NOTIFY request for the new dialog ++++
00869555.007 |14:58:13.839 |AppInfo |//SIP/Stack/Transport/0x0xe7df4d48/sipTransportPostSendMessage: Posting send for msg=0xefbe9910, addr=10.50.16.1, port=52910, connId=2748 for
00869555.008 |14:58:13.839 |AppInfo |//SIP/Stack/Info/0x0/act_dialog_pending_resp_event: Changing from State: SUBSCRIBE_STATE_DIALOG_PENDING to state SUBSCRIBE_STATE_ACTIVE
00869556.000 |14:58:13.839 |SdlSig   |SIPSPISignal                           |wait                           |SIPTcp(1,100,71,1)               |SIPHandler(1,100,79,1)           |1,100,14,31314.75^10.50.16.1^SEP00909E9D106C |*TraceFlagOverrode
00869556.001 |14:58:13.839 |AppInfo |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
[46241,NET]
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00002531
From: <sip:[email protected]>;tag=544e42f26d0b001e000056e7-0000311c
To: <sip:[email protected]>;tag=1822746380
Date: Mon, 16 Feb 2015 12:58:13 GMT
Call-ID: [email protected]
CSeq: 11 NOTIFY
Server: Cisco-CUCM10.5
Content-Length: 0
++++ The IP Phone sends its connection ID to CUCM, its ip address and its port number+++++++++
00869541.001 |14:58:13.838 |AppInfo |SIPStationInit: connID=2748, SEP00909E9D106C, 10.50.16.1:52910, Routed signal by connection index to (1,100,73,66)
++++ Next CUCM informs us that the NOTIFY message is for an offhook event ++++++
00869542.003 |14:58:13.838 |AppInfo |SIPStationD(66) - processCommonDialogNotifyInd: Notified Dialogs - Did 6 State trying
00869542.004 |14:58:13.838 |AppInfo |SIPStationD(66) - processCommonDialogNotifyInd:   Did 6 Sending Notified SIPOffHook to new Cdfc
00869542.010 |14:58:13.838 |AppInfo |SIPStationD(66) - processSIPOffHook Primary Call Not-Found
00869543.000 |14:58:13.838 |SdlSig   |SIPOffHookInd
+++ The next thing is the USER dials a digit on the phone ++++++
This is where it gets a little complicated. So lets examine this. The first digit that is dialled generates an INVITE to CUCM like this:
In this example the user dialled "4" first so we see an "INVITE sip:4@host-IP"
00869559.002 |14:58:14.064 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 1445 bytes:
[46242,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK000015ec
From: "Emre ESEN" <sip:[email protected]>;tag=544e42f26d0b001d00007cc9-000044a3
To: <sip:[email protected];user=phone>
Call-ID: [email protected]
Max-Forwards: 70
Date: Mon, 16 Feb 2015 12:58:14 GMT
CSeq: 101 INVITE
User-Agent: Cisco-SIPIPCommunicator/9.1.1
Contact: <sip:[email protected]:52910;transport=tcp>
Expires: 180
Accept: application/sdp
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE,INFO
Remote-Party-ID: "Emre ESEN" <sip:[email protected]>;party=calling;id-type=subscriber;privacy=off;screen=yes
Supported: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-cisco-serviceuri,X-cisco-escapecodes,X-cisco-service-control,X-cisco-srtp-fallback,X-cisco-monrec,X-cisco-config,X-cisco-sis-5.1.0,X-cisco-xsi-8.5.1
Allow-Events: kpml,dialog
Content-Length: 373
Content-Type: application/sdp
Content-Disposition: session;handling=optional
v=0
o=Cisco-SIPUA 21020 0 IN IP4 10.50.16.1
s=SIP Call
t=0 0
m=audio 20250 RTP/AVP 0 8 18 9 116 124 101
c=IN IP4 10.50.16.1
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:9 G722/8000
a=rtpmap:116 iLBC/8000
a=fmtp:116 mode=20
a=rtpmap:124 ISAC/16000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
+++++ NEXT CUCM sends a trying for the INVITE it received +++++++++++
00869562.001 |14:58:14.065 |AppInfo |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
[46243,NET]
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK000015ec
From: "Emre ESEN" <sip:[email protected]>;tag=544e42f26d0b001d00007cc9-000044a3
To: <sip:[email protected];user=phone>
Date: Mon, 16 Feb 2015 12:58:14 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: presence
Content-Length: 0
++++NOW CUCM evaluates the DTMF supported by the phone to determine how to inform the phones to send the remaining dtmf digits++++
From the INVITE cucm concludes that KPML and rtp-nte is supported
00869566.009 |14:58:14.066 |AppInfo |setEndpointsDtmfCaps: KPML Supported.
00869566.010 |14:58:14.066 |AppInfo |setEndpointsDtmfCaps: Detected inband DTMF support
Next CUCM generates kpml event pkg which is going to be used to receive the remaining digits from the phone
00869590.001 |14:58:14.067 |AppInfo |SIPEventPkg::SIPEventPkg 0xe4a1d1e0 scbId[16725], event name[kpml; [email protected]; from-tag=544e42f26d0b001d00007cc9-000044a3], id[]
+++ Next CUCM sends a SUBSCRIBE to the IP phone for kpml event +++++
00869594.001 |14:58:14.068 |AppInfo |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
[46244,NET]
SUBSCRIBE sip:[email protected]:52910 SIP/2.0
Via: SIP/2.0/TCP 10.28.132.111:5060;branch=z9hG4bKce719b37856
From: <sip:[email protected]>;tag=480227084
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 SUBSCRIBE
Date: Mon, 16 Feb 2015 12:58:14 GMT
User-Agent: Cisco-CUCM10.5
Event: kpml; [email protected]; from-tag=544e42f26d0b001d00007cc9-000044a3
Expires: 7200
Contact: <sip:[email protected]:5060;transport=tcp>
Accept: application/kpml-response+xml
Max-Forwards: 70
Content-Type: application/kpml-request+xml
Content-Length: 424
<?xml version="1.0" encoding="UTF-8" ?>
<kpml-request xmlns="urn:ietf:params:xml:ns:kpml-request" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:ietf:params:xml:ns:kpml-request kpml-request.xsd" version="1.0">
<pattern criticaldigittimer="1000" extradigittimer="500" interdigittimer="15000" persist="persist">
    <regex tag="Backspace OK">[x#*+]|bs</regex>
</pattern>
</kpml-request>
+++ Next we get a 200 OK to the SUBSCRIBE from the ip phone ++++
00869595.002 |14:58:14.118 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 459 bytes:
[46245,NET]
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.28.132.111:5060;branch=z9hG4bKce719b37856
From: <sip:[email protected]>;tag=480227084
To: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
Call-ID: [email protected]
Date: Mon, 16 Feb 2015 12:58:14 GMT
CSeq: 101 SUBSCRIBE
Server: Cisco-SIPIPCommunicator/9.1.1
Contact: <sip:[email protected]:52910;transport=TCP>
Expires: 7200
Content-Length: 0
+++ NEXT the IP phones sends the remaining digit dialled on the phone to CUCM +++
00869603.002 |14:58:14.183 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 573 bytes:
[46247,NET]
NOTIFY sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK000045c8
To: <sip:[email protected]>;tag=480227084
From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
Call-ID: [email protected]
Date: Mon, 16 Feb 2015 12:58:14 GMT
CSeq: 1000 NOTIFY
Event: kpml
Subscription-State: active; expires=7200
Max-Forwards: 70
Contact: <sip:[email protected]:52910;transport=TCP>
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
Content-Length: 0
00869608.001 |14:58:14.183 |AppInfo |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
[46248,NET]
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK000045c8
From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
To: <sip:[email protected]>;tag=480227084
Date: Mon, 16 Feb 2015 12:58:14 GMT
Call-ID: [email protected]
CSeq: 1000 NOTIFY
Server: Cisco-CUCM10.5
Content-Length: 0
+++Next the IP phone sends the next digit. Here its important to note that the NOTIFY doesnt contain the next digit,
the NOTIFY is still the same as the first digit but the next digit is carried in the xml document attached to the NOTIFY.
At this point I will insert a paragraph from the RFC 4730 for SIP KPML
+++++++++++++
The event package uses SUBSCRIBE
   messages and allows for XML documents that define and describe filter
   specifications for capturing key presses (DTMF Tones) entered at a
   presentation-free User Interface SIP User Agent (UA). The event
   package uses NOTIFY messages and allows for XML documents to report
   the captured key presses (DTMF tones), consistent with the filter
   specifications, to an Application Server +++++++++++++++++++++++++++
00869609.002 |14:58:14.209 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 877 bytes:
[46249,NET]
NOTIFY sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00003c9d
To: <sip:[email protected]>;tag=480227084
From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
Call-ID: [email protected]
Date: Mon, 16 Feb 2015 12:58:14 GMT
CSeq: 1001 NOTIFY
Event: kpml
Subscription-State: active; expires=7200
Max-Forwards: 70
Contact: <sip:[email protected]:52910;transport=TCP>
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
Content-Length: 209
Content-Type: application/kpml-response+xml
Content-Disposition: session;handling=required
<?xml version="1.0" encoding="UTF-8"?>
<kpml-response xmlns="urn:ietf:params:xml:ns:kpml-response" version="1.0" code="200" text="OK" suppressed="false" forced_flush="false" digits="0" tag="Backspace OK"/>
00869622.001 |14:58:14.210 |AppInfo |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
[46250,NET]
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00003c9d
From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
To: <sip:[email protected]>;tag=480227084
Date: Mon, 16 Feb 2015 12:58:14 GMT
Call-ID: [email protected]
CSeq: 1001 NOTIFY
Server: Cisco-CUCM10.5
Content-Length: 0
+++ Again we get the next digit ++++
00869624.002 |14:58:14.262 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 877 bytes:
[46251,NET]
NOTIFY sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK0000310f
To: <sip:[email protected]>;tag=480227084
From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
Call-ID: [email protected]
Date: Mon, 16 Feb 2015 12:58:14 GMT
CSeq: 1002 NOTIFY
Event: kpml
Subscription-State: active; expires=7200
Max-Forwards: 70
Contact: <sip:[email protected]:52910;transport=TCP>
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
Content-Length: 209
Content-Type: application/kpml-response+xml
Content-Disposition: session;handling=required
<?xml version="1.0" encoding="UTF-8"?>
<kpml-response xmlns="urn:ietf:params:xml:ns:kpml-response" version="1.0" code="200" text="OK" suppressed="false" forced_flush="false" digits="8" tag="Backspace OK"/>
00869637.001 |14:58:14.263 |AppInfo |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.50.16.1 on port 52910 index 2748
[46252,NET]
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK0000310f
From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
To: <sip:[email protected]>;tag=480227084
Date: Mon, 16 Feb 2015 12:58:14 GMT
Call-ID: [email protected]
CSeq: 1002 NOTIFY
Server: Cisco-CUCM10.5
Content-Length: 0
+++ Finally we get the last digit ++++
00869638.002 |14:58:14.390 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.50.16.1 on port 52910 index 2748 with 877 bytes:
[46253,NET]
NOTIFY sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 10.50.16.1:52910;branch=z9hG4bK00006c1c
To: <sip:[email protected]>;tag=480227084
From: <sip:[email protected]>;tag=544e42f26d0b001f0000092c-0000070a
Call-ID: [email protected]
Date: Mon, 16 Feb 2015 12:58:14 GMT
CSeq: 1003 NOTIFY
Event: kpml
Subscription-State: active; expires=7200
Max-Forwards: 70
Contact: <sip:[email protected]:52910;transport=TCP>
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE
Content-Length: 209
Content-Type: application/kpml-response+xml
Content-Disposition: session;handling=required
<?xml version="1.0" encoding="UTF-8"?>
<kpml-response xmlns="urn:ietf:params:xml:ns:kpml-response" version="1.0" code="200" text="OK" suppressed="false" forced_flush="false" digits="0" tag="Backspace OK"/>
Once digit collection is completed CUCM proceeds to finalise its digit analysis process.
Note that digit analysis is carried out for each digit that is recieved. I have only included the final DA here
00869648.003 |14:58:14.391 |AppInfo |Digit Analysis: star_DaReq: Matching SIP URL, Numeric User, user=4080
00869648.004 |14:58:14.391 |AppInfo |Digit Analysis: getDaRes data: daRes.ssType=[0] Intercept DAMR.sstype=[0], TPcount=[0], DAMR.NotifyCount=[0], DaRes.NotifyCount=[0]
00869648.005 |14:58:14.391 |AppInfo |Digit Analysis: getDaRes - Remote Destination [4080] isURI[0]
00869648.012 |14:58:14.391 |AppInfo |Digit analysis: match(pi="2", fqcn="9106", cn="9106",plv="5", pss="", TodFilteredPss="", dd="4080",dac="0")
00869648.013 |14:58:14.391 |AppInfo |Digit analysis: analysis results
00869648.014 |14:58:14.391 |AppInfo ||PretransformCallingPartyNumber=9106
|CallingPartyNumber=9106
|DialingPartition=
|DialingPattern=4XXX
|FullyQualifiedCalledPartyNumber=4080
|DialingPatternRegularExpression=(4[0-9][0-9][0-9])
|DialingWhere=
+++++Once this is done CUCM then proceeds to send the call out to to the intended destination as configured in the RL ++++
00869701.001 |14:58:14.435 |AppInfo |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.250.0.13 on port 5060 index 2754
[46256,NET]
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 10.28.132.111:5060;branch=z9hG4bKce931ee3d74
From: "Emre ESEN" <sip:[email protected]>;tag=16726~813ee89e-33db-4d58-9f6a-61542cc840ee-24419585
To: <sip:[email protected]>
Date: Mon, 16 Feb 2015 12:58:14 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces

Ata 190 not registeing call manager 10.5

HAI
I WAS TRYING TO INSTALL ATA 190 ON CALL MANAGER 10.5
I HAVE INSTALLED DEVICE PACK AND RESTARTED BOTH SERVER,STILL THE NETWORK LED BLIKS FAST AND NO REGISTERING ,I TRIED MANUEL TOO ITS NOT SHOWING REGISTERED.
TFTP SHOWS ALL FILES AVAILABLE.
ATA 187 WAS HAVING NO ISSUES
ALL PHONE S ALL GOOD
PLEASE HELP

Hi Vijay,
Bug could be the issue
ATA190 DHCP Option 150 TFTP server IP address not used
CSCun74479
Description
Symptom:
ATA190 will not use the TFTP server IP address provided by the DHCP server via the option 150 parameter.
ATA will not know which TFTP server to query in order to download its configuration and eventually register to CUCM
Conditions:
ATA 190 with 1.1.0(004) firmware or earlier
Workaround:
There are two workarounds,
1. Define option 15, domain name, on the DHCP server.
2. Configure TFTP server address manually via IVR or webGUI
For IVR, hit ####
Enter password, default is 24726
Enter option 221 to configure TFTP server IP address
For webGUI, go to the webpage
Login as admin,
username admin
password admin
Go to Voice >> Provisioning

Call Manager register fxs port with voice gateway- problem

I have a CUCM 6 and a Voice Gateway V224. I've configured the voice gateway's voice FXS ports as MGCP.
I have a Voip connected and registered to the CUCM and a Pots phone connected to the Voice Gateway.
If i dial from the Voip to the Pots phone it rings. The problem is that i cannot ring from the Pots to the Voip phone.
I have no dial tone.
If i write no shut down on the voice port i have a tone. If i configure mgcp on the voice port i have a busy ringtone.
I've entered no mgcp and mgcp commands and i've reset the voice gateway.
How can i call from the pots to the voip phone?
The ios version on the voice gateway is Version 12.4(22)T4.
Here is an outghtput from the Voice gateway.
ccm-manager mgcp
ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server 10.1.1.33
ccm-manager config
mgcp
mgcp call-agent CCMIOSS 2427 service-type mgcp version 0.1
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp validate domain-name
mgcp rtp payload-type g726r16 static
mgcp profile default
timeout tone busy 600
timeout tone dial 600
dial-peer voice 999223 pots
service mgcpapp
port 2/23
dial-peer voice 999222 pots
service mgcpapp
port 2/22
dial-peer voice 999888 pots
service mgcpapp
port 2/23
The CUCM 6 is registered with the voice gateway.

Is your campaign using CPA? If so, what's the behavior if CPA is not enabled?
I think the best thing to do is to run a trace...
Call Manager > Cisco Unified Serviceability > Trace > Configurations
Select a CUCM server - any subscriber would work.
Service Group - CM Services
Cisco CallManager (Inactive)
Enable SIP Stack Trace and apply to all nodes. Download and install RTMT
Make a bunch of outbound tests and then open RTMT > Trace & Log Central > Collect Files > Check "All Servers" for Cisco CallManager > Next > Next > Relative Range if you made the test calls within the last X minutes, otherwise you can set a From and To datetime. Click Finish and go through your SDL logs and see what errors you find and post them here.
Also, make sure your phone is in the correct CSS in Call Manager

How to generate reports of registered IP handsets and their corresponding extension on call manager 4.2.3

Hi
how to generate reports of registered IP handsets and their corresponding extension on call manager 4.2.3
I checked the route plan report and the generate report function on the BAT.. however it doesnt has the feature to generate only the registered IP phone with its coresponding extension
Thanks
Kind regards
Rachel

Call manager provides the called party with the extension or directory number of the calling party on a display. You can use the Calling Line ID Presentation field in the Gateway Configuration window to control whether the CLID displays for all outgoing calls on the gateway.Refer URL
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e48b.html#wp1051056

Can't remove registered ephone in call-manager-fallback

This ephone and dn keeps registering so long as call-manager-fallback is not shutdown.
RTR001#show ephone registered
ephone-1[0] Mac:0FD4.9DA0.D415 TCP socket:[1] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 6/5 max_streams=1
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
IP:10.32.21.183 * 26602 SCCP Gateway (AN) keepalive 4 max_line 2 available_line 1 dual-line
port 2/0/21
button 1: cw:1 ccw:(0)
dn 2 number 4851 CM Fallback CH1 IDLE
Preferred Codec: g711ulaw
Lpcor Type: none
The MAC 0FD4.9DA0.D415 identifies port 21 on a Cisco VG224. After shutting down that voice-port, the ephone doesn't register when call-manager-fallback is enabled.

Well, that is one idea that I've already had, Linc, but I'm reluctant to use the "nuclear option" for obvious reasons. I'm actually wondering now if the Secure Cert / OD problem is affecting Profile Manager. See this thread: https://discussions.apple.com/message/23686348#23686348

Cisco ip phone 7960 cannot connect to call manager express

The 7960 ip phone seems not to connect to the call manager express
router and i have already put the firmware and configured the tftp
server,the rest of the phones the 7911`s are all working ok,i have tried
to reset the phone but it doesnt respond to the # key so as to reset to
factory defaults.
I have tried all the options of resetting it but to no avail.
could someone give me some techie tips on this ? could it be a hardware issue ?? please assist.

Go to the phone and check if the TFTP server is correct (should be the CME IP address). Also check the DHCP address.
Resetting 7900 Series IP Phones to Factory Defaults:
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a00800941bb.shtml
Check the bug:
CSCed93627: Not able to reset 7970 back to factory defaults

WS6608 blade - port not registering to Call Manager

I'm having issues with my WS-6608 blade communicating with my Call manager. I have a total of 8 ports on this blade which
4 are currently active. The configuration is basically the same as the other active ports. Port 7/6 is not registering to my call manager. please help

the potr does not look like to be connected. Make sure 7/6 connected to the PSTN and there is actual connection?

Call Manager, Tandberg Video Phone bandwidth

We have recently rolled out a Tnadberg Video Phone.
Is the Tandberg phone considered an endpoint in call manager?
Can you adjust what bandwidth the phone uses from within call manager?

Locations in Cisco Unified CallManager Administration specify how much audio and video bandwidth is allowed for all calls in a specific location.

Bulk adding IP Phones in Call Manager 5.1

Does anyone have experience adding end users in Bulk to Call Manager 5.1? If so can you show me the CSV file format for this? We will be adding over three hundred new IP phones to our call manager and we have all the Mac addresses already, we just need to create all of the phones and directory numbers in Call Manager.
Any guidance would be great.
Thank you.
Rgds,
Vicky

Hello and thank you for your post. Unfortunately I have only just now had a chance to look at your post. Can you please renew my access to this download??
Please get back to me. Thank you again.
Rgds,
Vicky

Cisco call manager and ip phone software.

Hi everybody.
Does Cisco call manager also include software required for ip phone? Or software for ip phone needs to be installed on tftp server and it does not come with cisco call manager.?
thanks and have a great weekend.

Hi Sarah,
by ip phone software, do you mean Cisco IP Phone Agent software?
if yes, then you need to have Customer Response Solution (CRS) and Call Manager together to setup ip phone software (services).
check this link for further info:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00801c5765.shtml
plz Rate if it helped.
Soroush.

Call Manager - Phone register & unregister

Similar Messages

Maybe you are looking for