Call Message Not Appearing

Hello!
I was using Skype for a few months, but about a week ago, I noticed a problem. When my friend calles me, I the call message (the blue one at the top right corner) does not appear. When he writes to me, however, everything's fine, and the message appears. I don't know what's the problem, I haven't changed any settings. I'm using Windows 8, and I have Skype from the Windows Store. Please help me.

Having same problem.
While I'm on Audio call, I can send IMs to anyone except the person(s) I'm on call with. If I go to recent chats, when I click on another person I get the chat screen with some previous messages, but when I click the person I'm on call with, I get connection pane, with his profile pic all over the screen.
If that person sends me an IM, then the message appears in blue bubble, and disappears after a while, but I can't see previous messages.

Similar Messages

I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

I've found two bugs in iOS 7:
1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback

Contacts saved from messages and calls do not appear in contacts?

Hi, I've been having a problem with my contacts recently. Ever since I got my phone, I saved a few important contacts, however received messages and calls off people who were not in my contacts. I saved these from the messages, and calls but none of these saved contacts have appeared in the contacts app. It's really very frustrating. The contacts have been saved into my phone, as I can find them under spotlight search and in recent calls etc, they just do not appear in my contacts app. Can anyone help me sort this frustrating issue out? I'm on an iPhone 5c, under the updated software

Hi, I've been having a problem with my contacts recently. Ever since I got my phone, I saved a few important contacts, however received messages and calls off people who were not in my contacts. I saved these from the messages, and calls but none of these saved contacts have appeared in the contacts app. It's really very frustrating. The contacts have been saved into my phone, as I can find them under spotlight search and in recent calls etc, they just do not appear in my contacts app. Can anyone help me sort this frustrating issue out? I'm on an iPhone 5c, under the updated software

Error code message not appearing

Hi,
I tried to create a set of labview error codes codes using tools-> edit error codes. A created a few test errors and saved the file in
C:\Program Files\National Instruments\LabVIEW 2009\user.lib\errors
The file called test-errors.txt appears as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<nidocument>
<nicomment>
First error code file Sean
</nicomment>
<nierror code="5000">
Device unstable
</nierror>
<nierror code="5001">
Device Critically Unstable
</nierror>
<nierror code="5002">
Press Stop or device will begin countdown to destruction
</nierror>
<nierror code="5003">
Destruction Countdown Commenced, all organic life will be destroyed with a 2 mile radius in t - 10 minutes
</nierror>
</nidocument>
I then designed a simple VI to test the error codes, see the attachment. However the error message do not appear in the error out source box.
Does anyone know why LabVIEW is not recognising my error codes?
Rgds,
Sean
Solved!
Go to Solution.
Attachments:
test.vi ‏12 KB

Hi Sean,
OK - i took another look at your test VI and probing on the error out wire shows the description, but you are right it is not shown in the control. I have attached a VI that should solve the problem (I have tested it and i works ok)
All I have done is to use the general error handler, which returns the error code and description, write the description to the error cluster and set the general error handler to 'no dialogue' so that the message is not displayed.
Like i say, it works but if there is a better solution let me know!
David
David
www.controlsoftwaresolutions.com
Attachments:
Error cluster from error code (with description).vi ‏13 KB

Registered name during call does not appear

Hi to all!
Kindly help me in this problem.
I got this problem since I started using my BB curve 9300. My sister bought this in UK but Im using it right now here in the Philippines. Most of the time, when my friend is calling me, his/her name does not appear in my screen while its ringing. So everytime someone is calling, i think it's somebody else. But when I checked my phone history, my friend's name was registered.
Pls. help me

Hello !
In that case kindly update your contact list with the Country Code as well, because previously you were using your device in U.K and now in Philippines, so the only difference is due to International Dial Country code because of which your device is unable to recognise the name.
Kindly edit accordingly.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest there time on this Message anymore.
Thanks.

Messages not appearing on mac with mountain lion.

I downloaded ML and have an iphone 4 with up to date OS software. Is there a reason that my messages are not appearing on both? I have enabled messages on both devices, but nothing is transferring over. In fact I think that some imessages are not coming through to my cell phone at all.

You have to set this up a certain way to work.
On your Messages program on your macbook, make sure the account is using the same account as on your iPhone. On your iPhone, go into Messages settings, and make sure you are using your email address (the one from your account) as your caller ID. When you begin an iMessage conversation with someone, it will show up in both.

Group text messages not appearing in messages

I am receiving all one to one text messages on my iPhone and Macbook, but group strings are not appearing on my macbook pro. Am I missing something? I've deleted existing threads from phone, power cycled, and still no joy.

Hi,
I too have the same annoying issue. I have to continuously take out the battery and restart my Q10 in order for my text messages, facebook, and email notifications to come in. This is my second Q10 now as the first one started freezing when I tried sending emails so I thought the Hub problem was related to a faulty phone but now that I have my second one, the same problems are happening (except for the freezing of the phone). It is incredibly frustrating that a phone in this price range has such a basic fault when the main purpose of a mobile phone is to receive phone calls, text messages, and emails!!
I have also found that I have multiple contact details for the same person and that if I try to call someone's mobile that begins with 04 (Australian mobiles) I get told I can't call that number, but if I call a mobile with +61 (Australian country code) I get through to them! The phone also wont save contact details of people who only have a landlines number.
I have been with Blackberry for 6 years now and this is my 4th BB phone. I have always been a staunch advocate of the Blackberry until now. These software issues should not be happening in a high end phone.
Blackberry, please create a fix for these basic issues as soon as possible.
I have a Blackberry Q10; OS version 10.1.0.1910; Build 517312; and Software Update 10.1.0.314
Many thanks

Original Caller Id not appearing in case of call transfer [UCCE 7.0]

Dear All,
Currently we have UCCE 7.0 Environment and we are facing an issue that when a call is transferred by an Agent A to another Agent B via different Call Flow, the Original Caller Id of the customer is not getting displayed on Agent B Phone, rather it shows the Caller Id of the Agent A who has transferred the call. Following are the details of scenario.
1. We have two different call flows of ICM scripts, lets Call it Call Flow A and Call Flow B.
2. A Call arrives to Call Flow A, goes into the SkillGroup Queue and Call is answered by Agent A and he can see the correct Callerd Id. When Agent A determines that the call is not related to his skills, so he transfers the Call to Call Flow B.
3. The transferred Call in Call Flow B goes into the Skill Group Queue and is answered by Agent B but the Agent B can't see the original Caller Id of the customer, rather he is presented with the Caller Id of Agent A who transferred the Call.
Our contact center staff complains that the issue was not there before, so we tried to verify this through past Screen Recordings found that their claim is correct.
We tried to trouble shoot this by collecting wireshark logs, but as our call volume is too high so we couldn't figure out which party has changed the Caller Id. We tried to make a guess that may be at CVP end the Caller Id has been changed, so when we tried to filter the IP addresses of CVP Servers in wireshark logs as source and destinations, so we found no results.
I just want to know what would be the best way to troubleshoot this issue. And does anyone know what may cause this issue to trigger suddenly. We still have plans to capture the wireshark logs again during off peak hours, but still i thought i may get a good advise on this forum.
Regards,
Yasir

Hi Yasir - Route Pattern 2xxxx which is routed to CVP is specially created for transfer scenario ? or accidentally some one created this.
whatever the reason is Route pattern taking priority and transferring calls to CVP which is considering transfer leg as NEW CALL instead of PRE-ROUTE call so obviously phone Extn which is transferring the calls will appear as ANI which we can verify the same from below logs since ICM losing the call control it cannot update initial call info here the same can be verified in PIM logs.
Since you already enabled N/W transferred in PIM and Script, Just delete the Route Pattern 2xxx which is pointing to CVP and make test calls and tranfer the same call to 20083 via CTI and let me know the result
You can also verify the TCD table in HDS DB for the call where Router call key will be same for initial and Transfer leg
deleting Route Pattern will resolve the issue, make some test call and observe the ANI for tranfer leg
If not collect the logs will verify the same, also pls update me TCD table for those failure calls
// Fresh call from PSTN (36600985)
Line 3174: 5774543: 10.149.26.36: Jan 01 2015 23:04:28.910 +0300: %CVP_7_0_SIP-7-CALL: {Thrd=Pool:SIP[1045172]} Matched 10047 to 10.149.26.35
Line 3175: 5774544: 10.149.26.36: Jan 01 2015 23:04:28.910 +0300: %CVP_7_0_SIP-7-CALL: {Thrd=Pool:SIP[1045172]} Using Local Static Route for sip:[email protected]
// Transfer call from 10047 using Route Pattern
Line 3559: 5774771: 10.149.26.36: Jan 01 2015 23:06:08.066 +0300: %CVP_7_0_SIP-7-CALL: {Thrd=DATAI.7} NEW CALL with guid=754ADE47912811E48D7897BD6DF783AA legid=754B7A6F-912811E4-8D7E97BD-6DF783AA dn=20083 ani=10047 uui=null calldate=Thu Jan 01 23:06:08 AST 2015 video=false
// Request from VG to CVP
5774793: 10.149.26.36: Jan 01 2015 23:06:29.878 +0300: %CVP_7_0_SIP-7-PARAM: {Thrd=DATAI.7} CALLGUID = 824B1BC0912811E4BDE75475D04FE580 LEGID = 824BB7E8-912811E4-8D8997BD-6DF783AA - [INBOUND]: ReqURI (DN) sip:[email protected]:5060 FromURI sip:[email protected] Video:false
// Final Agent Transfer
10.149.26.36: Jan 01 2015 23:06:32.550 +0300: %CVP_7_0_SIP-7-CALL: {Thrd=Pool:SIP[1045217]} Matched 10074 to 10.149.26.35
Using Local Static Route for sip:[email protected]
[OUTBOUND]: INVITE TO <sip:[email protected];transport=udp> FROM 10047 <sip:[email protected]:5060>

ChaRM - Message not appearing in CRM Web Client

Hi
My company is using ChaRM and have ZMCR setup for Change Requests. Due to audit reasons, the requester and approver in ZMCR cannot be the same person.
I have gone into SE91 and access message class SOCM_ACTION_LOG. Here, I have created my new message.
I have then gone into SPRO and setup all the necessary configuration.
And it works perfectly!!!! EXCEPT.....the error message doesn't show in CRM Web Client UI. So the functionality is working fine but obviously we need the message to appear so users no why the change request hasn't changed status.
Firstly, here is my config in SPRO:
And this is what's showing in CRM Web Client:
I have read online that function module CRM_MESSAGE_COLLECT is used to show messages in CRM Web Client. I am not an ABAPer. How does this function module work? What do I do with it? Or is there something else I need to do for this message to show?
Pretty sure my config is spot on so just need some advice on how to get the message to show.
Thanks very much!!!!!!!
Shaun

Hi Shaun,
Did you register your custom messages in the SPRO settings? You need to use Appl. Area SOCM_ACTION_LOG and make an entry in the below tanble for Single Messages;
Regards,
Vivek

Declined call, does not appear as missed call in Notification center

When I receive a call in Lock screen in iOS7, with two quick clicks of the Sleep button declines the call, but does not appear as missed call in Notification center. It's a "new feature" or it's a bug?
I want it back like in iOS 5 and 6.

We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback

Why are some inbox messages not appearing in Mail on multiple macs and other devices?

My partner and I have an iMac at home and one at work. We also have two iPhones and two iPads. We only have a couple email accounts each and two for work set up on all six Mail applications. For some reason inbox messages are not appearing consistantly on all six devices. For example, I can have a new message from my Mom, see it at home and on my iPhone, but not on the iMac at work.
Also, some messages I'd like deleted off my work iMac since they're personal, but I'd like them kept on my home iMac and iPhone. Is this possible? Is it possible to delete a message on one and have it deleted on all others?
Message was edited by: witboy

What type of email accounts are they? IMAP or POP.
IMAP leaves messages on the server so you can get them from everywhere.
With POP, messages are downloaded to your client and then removed from the server, depending on your settings.
The iDevice setup for POP doesn't remove them from the server.
I think Mail's default setup for POP is to remove immediately.
If they are POP accounts, you can set Mail's preferences to leave messages on the server for a period of time so that you can retrieve them on multiple clients.

Raised Messages Not Appearing In ByDesign

Hello everyone,
Simple question --- I have a message on a custom BO I want to appear in ByDesign should a script successfully run. The message appears with the correct values in the debugger if I have it open, but nothing comes up along the bottom of the screen in ByDesign, whether the debugger's open or not.
I was under the impression that all I had to do was write:
raise MessageName.Create("S", <parameter list>);
And it would appear, but apparently not. The screen in question is the file input screen: I want a message to appear should the file input successfully trigger and run an AfterModify script to completion. Any ideas? Thanks!
Lewis

Hi Frederick,
In order to be able to display synchronous messages in SXI_MONITOR you have to set the following
parameter in SXMB_ADM.
Go to SXMB_ADM --> Integration Engine Configuration. Click on 'specific Configuration'.
Add the following parameter:
Category: RUNTIME
Parameter: LOGGING_SYNC
Value: 1.
Hope this helps you.
Carlos

Callback message not appearing on Siemens Hicom connected phones

We have connected two Siemens Hicom 350 PABXs using E1 controllers on two routers. The routers are connected via an IP (over ATM) link. Siemens digital phones are connected to each PABX. Calls are going across smoothly, however, when callback feature is initiated from a phone on one PABX to a phone on the other PABX, the initiating phone shows the message "Not possible" although the callback is actually set and does call back. The message should show as "Will call back".

Ok, the situation now is pretty bright. I think you should have noticed the error in the second debug output. The Cisco has hard time in parsing/decoding the ISDN Q.931 packet and therefore shot an error message.
Could you provide me with the IOS versions of the gateways, or even better - the H323 versions they are running.
For the time being, I would recommend to you to issue the global command "isdn gateway-max-internetworking". With this command the Cisco gateways will try to do their best to pass transparently the unknown ISDN packets without trying to decode them. Let me know if that works.
After checking the H323 version, compiled into your gateway's IOSes, you should see if they are running H323 version 2,3, or 4. AFAIK, 12.3 IOSes are running H323 version 4, which has the ability to "tunnel" QSIG messages over the IP.

Syslog Messages Not Appearing

Hi, I'm hoping someone can help me get my syslog messages to appear when I'm logged into the switch via SSH on a Cisco 4510R Switch. The ones that appear when I shutdown/no shutdown interfaces, leave global config mode, all the basic messages I'm used to seeing when logged in via console, telnet, or ssh.
The show run command displays logging console critical, which is the default of (2) I believe.
In global config, I set logging monitor 2, and also tried both console and monitor at level 5. Nothing is showing up.
Show logging displays all the latest messages, but I'm used to these showing up as things are configured.
This is the way the switch was set up prior to my working here.
Does anyone have any idea why this, and how I can get it working?
Thanks.

According to your configuration guide the default is debugging ie. level 7 so I suspect this has been changed.
In regards to your question if you are logged in via a vty line then you need to change the monitor level but then you may also need to type -
"terminal monitor" or "term mon" for short.
if you want turn it off -
"terminal no monitor"
Jon

N80 - Missed call indicator not appearing on Activ...

Hi All
As title - the missed call indicator doesn't appear on the active standby screen on my N80 (when I've got missed calls, obviously). It does appear on other screens (applications and menus). All other icons do (new SMS, new Voicemail, USB, wireless etc). Firmware is the latest version (AFAIK, it's the .017 version, dated 03-05-2006). Is this just me, or do all N80s have this problem (I'm on orange, BTW).
Thanks Si.

Hi
Thanks for the replies.
I've been in touch with Orange, and I'm waiting for them to get back to me. Strangely, I spoke to Nokia support and they said the missed call indicator shouldn't appear on the active standby screen (i.e. the 'U' shaped arrow underneath the battery meter). I'm not convinced - has anyone else got an N80 they can test (phone yourself, hang up after a couple of rings, then choose "exit" on the notification message - do you get the missed call icon top right on active standby, or just on the menus / application screens?)
Thanks
Si.

Call Message Not Appearing

Similar Messages

Maybe you are looking for