Call not connecting, after dailing a
In N. Ga.
after dailing a #, delays to connect then drops call.
its been happening for the last 2 hrs
Outage perhaps? Try pulling Sim if persists
Similar Messages
-
Internet not connecting after ios 7.0.2 update on iphone 5
Internet not connecting after ios 7.0.2 update on iphone 5
Hi there PompasJr,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
-Griff W. -
I PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1
i PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1
Sorry to hear that.
Do you have a technical support question? If so, please don't hesitate to ask. Also, please let us know the troubleshooting steps you've taken so far. -
ISCSI initiator not connecting after upgradation
HI,
iSCSI initiator not connecting after upgradation from windows 2003 STD to windows 2008 STD R2 server, upgradation was successfully completed, except Microsoft iSCSI initiator connectivity, the initiaor interface show it as 'reconnecting'....!!!!!
Kindly guide on this.
Thanks in AdvanceHI Shaon Shan,
Thanks for the info.
While searching for the file names start with iscsi in c:\windows\system32 folder the file version is 5.2.3790.3825 in working windows 2003 server.
Recently I've downloaded (Not yet installed) iSCSI initiator for Windows 2008 from Microsoft website in that iSCSI initiator file version shown as 6.3.4.1, instead of using inbuilt Microsoft iSCSI initiator in W2K8, shall I try installing the downloaded
version,
because when I checked in Windows 2008 (Upgraded version) the iSCSI file version remains the same as 5.2.3790.3825 which was found in windows 2003.
Post to our previous discussion
While I'm trying to install the new iSCSI initiator for Windows 2008 downloaded from Microsoft website, it shows some error "Setupcould not find the update.inf file needed to update your system" then I've updated my server, but no luck still showing the
same....!!!! -
TS1538 Still not connecting after all these steps were done, what is the solution?
Still not connecting after all these steps were done, what is the solution?
Tried a different cable, this cable will now charge the ipod, but will not be recognized by the computer as even being a drive.
haven't tried a different computer because I really don't want itunes instaled on it. -
OS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this help.
I attempted to uninstall QT and reinstall- the QT 7.4 installer failed to install (it said a more up to date version was present, even though I'd trashed the old one). I downloaded and reinstalled 7.5 but itunes still did not work.
While my solution wasn't ideal
1) It was what Apple told me to do!
2) It seemed preferable to A) A complete system reinstall, B) removing 264 .plist files one at a time, rebooting, and seeing which one was causing the problem.
I still have the old .plist files in another folder, and can replace them in my preferences folder if I decide I need them. Most apps will create a new .plist file on start-up if there is not one present, so unless it is a program where I have gone to great lengths to change preferences from default, I'm guessing I will not notice much difference (and if I do, I can always go to my archive of .plists, or on Time Machine for that matter...) -
MacBook Air Camera is not connected after mac OS update
MacBook Air Camera is not connected after mac update
I have a MacBook Air OS X version - 10.9.4 . I updated my mac 1 week before but todayI check that my mac in built camera is not working Even I try to check in this thing in all the apps. Please provide the way how to sort out this issue asap.Use the suggestions here: http://support.apple.com/kb/HT2090
The SMC reset often fixes your problem.
Be sure you follow the instructions for your particular Mac model.
If your problem continues, restart Mac. Then download and install OS X Mavericks 10.9.4 Update (Combo).
If that does not correct the problem, reinstall Mac OS X.
If nothing else works, contact your Apple Service provider or Apple MacBook Support for help. -
Firefox would not connect after upgrade from verion 6 to version 7. Did system restore (XP) and now firefox wont even start
Sometimes Firefox will hang during startup or shutdown, and still be running invisibly in the background. Usually in that case, you need to "kill" it either by restarting Windows or using the Windows Task Manager. It sounds as though you are familiar with opening the Processes tab, finding firefox.exe, and using End Process.
If you use an advanced firewall or other security software that tracks which programs are permitted to use the internet, please see these articles:
* [[Fix problems connecting to websites after updating Firefox]]
* [[Configure firewalls so that Firefox can access the Internet]]
A couple of other suggestions:
(1) Can you start Firefox in its Safe Mode? Hold down the Shift key when starting Firefox. You should get a two-button dialog. Click "Start in Safe Mode" (''not'' Reset). Any difference?
(2) In case your regular software missed something that is interfering with Firefox, try the scanning and clean-up tools listed in this article: [[Troubleshoot Firefox issues caused by malware]] -
IPSec VPN brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help?
Uggh, it's so frustrating! I've googled every search phrase I can think of and this seems to be the only thread describing this exact issue. I'm always automatically logged into Facebook on my MBP but just to be sure I logged out and back in and it worked fine.
I gotta say, I wasn't a fan of the Droid I had preceding this iPhone, and from what I hear the iPhone app for FB is a thousand times better - not that I'd know personally because I can't log in!! - but I could always access my FB account on the droid. Just sayin... -
Analog line (FXO) Incoming calls getting connected after 3 rings
HI,
we are having 4 Analog line (FXO)...Every time when callers call the number they hear 3 rings & after that call frwds to AA or any extension.
In show voice port summary, we can see that voice port is getting connect at the first ring but after 3 rings only phone rings.
here is the o/p of voice port.
Foreign Exchange Office 0/0/0 Slot is 0, Sub-unit is 0, Port is 0
Type of VoicePort is FXO
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is not set
Noise Regeneration is enabled
Non Linear Processing is enabled
Non Linear Mute is disabled
Non Linear Threshold is -21 dB
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 3 dB
Echo Cancellation is enabled
Echo Cancellation NLP mute is disabled
Echo Cancellation NLP threshold is -21 dB
Echo Cancel Coverage is set to 128 ms
Echo Cancel worst case ERL is set to 6 dB
Playout-delay Mode is set to adaptive
Playout-delay Nominal is set to 60 ms
Playout-delay Maximum is set to 1000 ms
Playout-delay Minimum mode is set to default, value 40 ms
Playout-delay Fax is set to 300 ms
Connection Mode is plar
Connection Number is 250
Initial Time Out is set to 15 s
Interdigit Time Out is set to 10 s
Call Disconnect Time Out is set to 60 s
Power Denial Disconnect Time Out is set to 1000 ms
Ringing Time Out is set to 180 s
Wait Release Time Out is set to 30 s
Companding Type is u-law
Region Tone is set for AE
Analog Info Follows:
Currently processing none
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Impedance is set to 600r Ohm
Station name None, Station number None
Caller ID Info Follows:
Standard BELLCORE
Caller ID is received after 1 ring(s)
Translation profile (Incoming): INCOMING_CallerID_PROFILE
Translation profile (Outgoing):
lpcor (Incoming):
lpcor (Outgoing):
Voice card specific Info Follows:
Signal Type is loopStart
Battery-Reversal is enabled
Number Of Rings is set to 1
Supervisory Disconnect is signal
Answer Supervision is inactive
Hook Status is On Hook
Ring Detect Status is inactive
Ring Ground Status is inactive
Tip Ground Status is inactive
Dial Out Type is dtmf
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Pulse Rate Timing is set to 10 pulses/second
InterDigit Pulse Duration Timing is set to 750 ms
Percent Break of Pulse is 65 percent
GuardOut timer is 2000 ms
Minimum ring duration timer is 125 ms
Hookflash-in Timing is set to 600 ms
Hookflash-out Timing is set to 400 ms
Supervisory Disconnect Timing (loopStart only) is set to 350 ms
OPX Ring Wait Timing is set to 6000 ms
Secondary dialtone is disabledhostname VGUAE001
no aaa new-model
clock timezone UAE 4 0
ip cef
ip domain name yourdomain.com
no ipv6 cef
multilink bundle-name authenticated
trunk group ALL_FXO
max-retry 5
voice-class cause-code 1
hunt-scheme longest-idle
translation-profile outgoing PROFILE_ALL_FXO
voice-card 0
voice call send-alert
voice rtp send-recv
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
voice class cause-code 1
no-circuit
voice translation-rule 1112
rule 1 /^9/ //
voice translation-rule 3265
rule 1 // /9\1/
voice translation-profile INCOMING_CallerID_PROFILE
translate calling 50
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
license udi pid CISCO2901/K9 sn FCZ173992Z8
hw-module pvdm 0/0
hw-module pvdm 0/1
username cisco privilege 15 secret 4 opjnnkXqCr4kCOa9DuALcNpBOMetBAc/usnpSWADsCI
username godiva privilege 15 secret 4 cH8b8z.ioYu/pMv/AKuEcBd/f6g9v/vm/s3aXeqUAd6
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 192.168.31.2 255.255.255.0
ip helper-address 192.168.31.11
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip bind srcaddr 192.168.31.2
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:
ip route 0.0.0.0 0.0.0.0 192.168.31.1
control-plane
voice-port 0/0/0
trunk-group ALL_FXO 64
translation-profile incoming INCOMING_CallerID_PROFILE
groundstart auto-tip
cptone AE
connection plar opx 222
caller-id enable
voice-port 0/0/1
trunk-group ALL_FXO 64
translation-profile incoming INCOMING_CallerID_PROFILE
cptone AE
connection plar opx 222
caller-id enable
voice-port 0/0/2
trunk-group ALL_FXO 64
translation-profile incoming INCOMING_CallerID_PROFILE
cptone AE
connection plar opx 222
caller-id enable
voice-port 0/0/3
trunk-group ALL_FXO 64
translation-profile incoming INCOMING_CallerID_PROFILE
cptone AE
connection plar opx 250
caller-id enable
mgcp profile default
dial-peer voice 2000 voip
destination-pattern 2..
session target ipv4:192.168.31.11
incoming called-number .
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
dial-peer voice 10 pots
trunkgroup ALL_FXO
description **CCA*UAE*Fire**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 997
forward-digits all
no sip-register
dial-peer voice 11 pots
trunkgroup ALL_FXO
description **CCA*UAE*International Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 900T
forward-digits all
no sip-register
dial-peer voice 12 pots
trunkgroup ALL_FXO
description **CCA*UAE*Eitisalat**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9101
forward-digits all
no sip-register
dial-peer voice 13 pots
trunkgroup ALL_FXO
description **CCA*UAE*Water or electrical emergencies**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 971
forward-digits all
no sip-register
dial-peer voice 14 pots
trunkgroup ALL_FXO
description **CCA*UAE*Police and emergencies**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 999
forward-digits all
no sip-register
dial-peer voice 15 pots
trunkgroup ALL_FXO
description **CCA*UAE*National area codes**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9[1-579].......
forward-digits all
no sip-register
dial-peer voice 16 pots
trunkgroup ALL_FXO
description **CCA*UAE*Mobile Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 90[5-6][0-7].......
forward-digits all
no sip-register
dial-peer voice 17 pots
trunkgroup ALL_FXO
description **CCA*UAE*toll-free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9[2-9]00T
forward-digits all
no sip-register
dial-peer voice 18 pots
trunkgroup ALL_FXO
description **CCA*UAE*Fixed Line Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9[2-8]T
forward-digits all
no sip-register
dial-peer voice 19 pots
trunkgroup ALL_FXO
description **CCA*UAE*808**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9808T
forward-digits all
no sip-register
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/0/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/0/1
dial-peer voice 52 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/0/2
dial-peer voice 53 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/0/3
dial-peer voice 54 pots
description ** FXO pots dial-peer **
destination-pattern A0
port 0/0/0
no sip-register
dial-peer voice 55 pots
description ** FXO pots dial-peer **
destination-pattern A1
port 0/0/1
no sip-register
dial-peer voice 56 pots
description ** FXO pots dial-peer **
destination-pattern A2
port 0/0/2
no sip-register
dial-peer voice 57 pots
description ** FXO pots dial-peer **
destination-pattern A3
port 0/0/3
no sip-register
Debug vpm signal:
Nov 23 19:31:31.556: htsp_process_event: [0/0/0, FXOLS_ONHOOK, E_DSP_SIG_0000]fxols_onhook_ringing
Nov 23 19:31:31.556: htsp_timer - 125 msec
Nov 23 19:31:31.684: htsp_process_event: [0/0/0, FXOLS_WAIT_RING_MIN, E_HTSP_EVENT_TIMER]fxols_wait_ring_min_timer
Nov 23 19:31:31.684: htsp_timer - 10000 msec
Nov 23 19:31:31.684: htsp_timer3 - 5600 msec
Nov 23 19:31:31.684: [0/0/0] htsp_start_caller_id_rx:Mode BELLCORE. Alerting 0x1
Nov 23 19:31:31.684: htsp_start_caller_id_rx create dsp_stream_manager
Nov 23 19:31:31.684: [0/0/0] htsp_dsm_create_success returns 1
Nov 23 19:31:33.604: htsp_process_event: [0/0/0, FXOLS_RINGING, E_DSP_SIG_0100]
Nov 23 19:31:33.604: fxols_ringing_not
Nov 23 19:31:33.604: htsp_timer_stop
Nov 23 19:31:33.604: htsp_timer - 10000 msec
Nov 23 19:31:37.284: htsp_process_event: [0/0/0, FXOLS_RINGING, E_HTSP_EVENT_TIMER3]fxols_snoop_clid_stop
Nov 23 19:31:37.284: htsp_timer_stop3
Nov 23 19:31:37.516: htsp_process_event: [0/0/0, FXOLS_RINGING, E_DSP_SIG_0000]
Nov 23 19:31:39.604: htsp_process_event: [0/0/0, FXOLS_RINGING, E_DSP_SIG_0100]
Nov 23 19:31:39.604: fxols_ringing_not
Nov 23 19:31:39.604: htsp_timer_stop
Nov 23 19:31:39.604: htsp_timer_stop3
Nov 23 19:31:39.604: [0/0/0] htsp_stop_caller_id_rx. message length 0htsp_setup_ind
Nov 23 19:31:39.604: [0/0/0] get_fxo_caller_id:Caller ID receive failed. parseCallerIDString:no data.
Nov 23 19:31:39.604: [0/0/0] get_local_station_id calling num= calling name= calling time=11/23 23:31 orig called=
Nov 23 19:31:39.604: //-1/B583C95F8093/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=
----- ccCallInfo IE subfields -----
cisco-ani=
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=250
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=0
cisco-rdnsi=0
cisco-redirectreason=0 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
Nov 23 19:31:39.604: //-1/B583C95F8093/CCAPI/cc_api_call_setup_ind_common:
Interface=0x3CE27724, Call Info(
Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=250(TON=Unknown, NPI=Unknown),
Calling Translated=FALSE, Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE,
Incoming Dial-peer=50, Progress Indication=ORIGINATING SIDE IS NON ISDN(3), Calling IE Present=FALSE,
Source Trkgrp Route Label=ALL_FXO, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=-1
Nov 23 19:31:39.604: //-1/B583C95F8093/CCAPI/ccCheckClipClir:
In: Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
Nov 23 19:31:39.604: //-1/B583C95F8093/CCAPI/ccCheckClipClir:
Out: Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
Nov 23 19:31:39.604: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Nov 23 19:31:39.604: :cc_get_feature_vsa malloc success
Nov 23 19:31:39.604: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Nov 23 19:31:39.604: cc_get_feature_vsa count is 1
Nov 23 19:31:39.604: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Nov 23 19:31:39.604: :FEATURE_VSA attributes are: feature_name:0,feature_time:1025218944,feature_id:83
Nov 23 19:31:39.604: //83/B583C95F8093/CCAPI/cc_api_call_setup_ind_common:
Set Up Event Sent;
Call Info(Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=250(TON=Unknown, NPI=Unknown))
Nov 23 19:31:39.608: [0/0/0] htsp_dsm_close_done
Nov 23 19:31:39.608: htsp_process_event: [0/0/0, FXOLS_WAIT_SETUP_ACK, E_HTSP_SETUP_ACK]
Nov 23 19:31:39.608: fxols_wait_setup_ack:
Nov 23 19:31:39.608: [0/0/0] set signal state = 0xC timestamp = 0fxols_check_auto_call
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/cc_process_call_setup_ind:
Event=0x22ACD828
Nov 23 19:31:39.608: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
Try with the demoted called number 250
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/ccCallSetContext:
Context=0x230F9C10
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 83 with tag 50 to app "_ManagedAppProcess_Default"
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/ccCallSetupRequest:
Destination=, Calling IE Present=FALSE, Mode=0,
Outgoing Dial-peer=2000, Params=0x230FB0D0, Progress Indication=ORIGINATING SIDE IS NON ISDN(3)
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/ccCheckClipClir:
In: Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/ccCheckClipClir:
Out: Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/ccCallSetupRequest:
Destination Pattern=2.., Called Number=250, Digit Strip=FALSE
Nov 23 19:31:39.608: //83/B583C95F8093/CCAPI/ccCallSetupRequest:
Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=250(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=
Account Number=, Final Destination Flag=TRUE,
Guid=B583C95F-53AC-11E3-8093-C8EEBDE4256A, Outgoing Dial-peer=2000
Nov 23 19:31:39.612: //83/B583C95F8093/CCAPI/cc_api_display_ie_subfields:
ccCallSetupRequest:
cisco-username=
----- ccCallInfo IE subfields -----
cisco-ani=
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=250
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=0
cisco-rdnsi=0
cisco-redirectreason=0 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
Nov 23 19:31:39.612: //83/B583C95F8093/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x22847B14, Interface Type=1, Destination=, Mode=0x0,
Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=250(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE, Outgoing Dial-peer=2000, Call Count On=FALSE,
Source Trkgrp Route Label=ALL_FXO, Target Trkgrp Route Label=, tg_label_flag=1, Application Call Id=)
Nov 23 19:31:39.612: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Nov 23 19:31:39.612: :cc_get_feature_vsa malloc success
Nov 23 19:31:39.612: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Nov 23 19:31:39.612: cc_get_feature_vsa count is 2
Nov 23 19:31:39.612: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Nov 23 19:31:39.612: :FEATURE_VSA attributes are: feature_name:0,feature_time:1025218720,feature_id:84
Nov 23 19:31:39.612: //84/B583C95F8093/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=1, FlowMode=1
Nov 23 19:31:39.612: //84/B583C95F8093/CCAPI/ccCallSetContext:
Context=0x230FB080
Nov 23 19:31:39.612: //83/B583C95F8093/CCAPI/ccSaveDialpeerTag:
Outgoing Dial-peer=2000
Nov 23 19:31:39.612: htsp_process_event: [0/0/0, FXOLS_PROCEEDING, E_HTSP_PROCEEDING]fxols_offhook_proc
Nov 23 19:31:39.612: htsp_timer - 120000 msec
Nov 23 19:31:39.612: //84/B583C95F8093/CCAPI/ccGetMediaClassTag:
media class tag 0
Nov 23 19:31:39.612: //84/B583C95F8093/CCAPI/ccSetMediaclassIp2ipTags:
media class tags set: NR 0, ASP 0
Nov 23 19:31:39.612: //83/B583C95F8093/CCAPI/ccSetMediaclassIp2ipTags:
media class tags set: NR 0, ASP 0
Nov 23 19:31:39.612: //84/B583C95F8093/CCAPI/ccGet_xc_nr_asp_info:
media class tags: NR 0, ASP 0
Nov 23 19:31:39.612: //83/B583C95F8093/CCAPI/ccGet_xc_nr_asp_info:
media class tags: NR 0, ASP 0
Nov 23 19:31:39.620: //84/B583C95F8093/CCAPI/cc_api_set_called_ccm_detected:
CallInfo(called ccm detected=TRUE ccmVersion 3)
Nov 23 19:31:39.620: //84/B583C95F8093/CCAPI/cc_api_call_proceeding:
Interface=0x22847B14, Progress Indication=NULL(0)
Nov 23 19:31:39.628: //84/B583C95F8093/CCAPI/cc_api_set_called_ccm_detected:
CallInfo(called ccm detected=TRUE ccmVersion 3)
Nov 23 19:31:39.628: //84/B583C95F8093/CCAPI/cc_api_set_delay_xport:
CallInfo(delay xport=TRUE)
Nov 23 19:31:39.628: //84/B583C95F8093/CCAPI/cc_api_call_alert:
Interface=0x22847B14, Progress Indication=NULL(0), Signal Indication=SIGNAL RINGBACK(1)
Nov 23 19:31:39.628: //84/B583C95F8093/CCAPI/cc_api_call_alert:
Call Entry(Retry Count=0, Responsed=TRUE)
Nov 23 19:31:39.628: //83/B583C95F8093/CCAPI/ccCallAlert:
Progress Indication=NULL(0), Signal Indication=SIGNAL RINGBACK(1)
Nov 23 19:31:39.628: //83/B583C95F8093/CCAPI/ccCallAlert:
Call Entry(Responsed=TRUE, Alert Sent=TRUE)htsp_alert_notify
Nov 23 19:31:39.628: htsp_process_event: [0/0/0, FXOLS_PROCEEDING, E_HTSP_ALERT]fxols_offhook_alert
Nov 23 19:31:39.628: //84/B583C95F8093/CCAPI/cc_api_set_called_ccm_detected:
CallInfo(called ccm detected=TRUE ccmVersion 3)
Nov 23 19:31:39.628: //84/B583C95F8093/CCAPI/cc_api_call_notify:
Data Bitmask=0x5, Interface=0x22847B14, Call Id=84
Nov 23 19:31:39.628: //84/B583C95F8093/CCAPI/cc_api_get_ssCTreRoutingNotSupported:
CallInfo(ssCTreRoutingNotSupported=FALSE)
Nov 23 19:31:39.628: //84/B583C95F8093/CCAPI/cc_api_get_ccm_detected:
CallInfo(ccm detected=TRUE)
Nov 23 19:31:39.628: //83/B583C95F8093/CCAPI/ccCallNotify:
Data Bitmask=0x5, Call Id=83htsp_call_service_msghtsp_call_service_msg not EFXS (2)
Nov 23 19:31:39.672: //84/B583C95F8093/CCAPI/ccIsInfoRingback:
Returning dpRingBack=0
Nov 23 19:31:39.700: //84/B583C95F8093/CCAPI/cc_api_call_connected:
Interface=0x22847B14, Data Bitmask=0x1, Progress Indication=NULL(0),
Connection Handle=0
Nov 23 19:31:39.700: //84/B583C95F8093/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
Nov 23 19:31:39.700: //84/B583C95F8093/CCAPI/cc_api_set_called_ccm_detected:
CallInfo(called ccm detected=TRUE ccmVersion 3)
Nov 23 19:31:39.700: //84/B583C95F8093/CCAPI/cc_api_call_notify:
Data Bitmask=0x7, Interface=0x22847B14, Call Id=84
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/ccGenerateToneInfo:
Stop Tone On Digit=FALSE, Tone=Null,
Tone Direction=Network, Params=0x0, Call Id=83
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/ccConferenceCreate:
(confID=0xFFFFFFFF, callID1=0x53, gcid=B583C95F-53AC11E3-8093C8EE-BDE4256A, tag=0x0)
Nov 23 19:31:39.700: //84/B583C95F8093/CCAPI/ccConferenceCreate:
(confID=0xFFFFFFFF, callID2=0x54, gcid=B583C95F-53AC11E3-8093C8EE-BDE4256A, tag=0x0)
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/ccConferenceCreate:
Conference Id=0xFFFFFFFF, Call Id1=83, Call Id2=84, Tag=0x0
Nov 23 19:31:39.700: htsp_call_bridged invoked
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/cc_api_bridge_done:
Conference Id=0x21, Source Interface=0x3CE27724, Source Call Id=83,
Destination Call Id=84, Disposition=0x0, Tag=0xFFFFFFFF
Nov 23 19:31:39.700: //84/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
Nov 23 19:31:39.700: cc_api_get_xcode_stream : 4819
Nov 23 19:31:39.700: //84/B583C95F8093/CCAPI/cc_api_bridge_done:
Conference Id=0x21, Source Interface=0x22847B14, Source Call Id=84,
Destination Call Id=83, Disposition=0x0, Tag=0x0
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/cc_generic_bridge_done:
Conference Id=0x21, Source Interface=0x22847B14, Source Call Id=84,
Destination Call Id=83, Disposition=0x0, Tag=0x0
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x21, Destination Call Id=84)
Nov 23 19:31:39.700: //84/B583C95F8093/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x21, Destination Call Id=83)
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/ccConferenceCreate:
Nov 23 19:31:39.700: confID:0x21; callEntry1 callID1:0x53, type:6; callEntry2 callID2:0x54, type:1
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/cc_api_caps_ind:
Destination Interface=0x22847B14, Destination Call Id=84, Source Call Id=83,
Caps(Codec=0x1, Fax Rate=0x1, Fax Version:=0, Vad=0x1,
Modem=0x2, Codec Bytes=20, Signal Type=3)
Nov 23 19:31:39.700: //83/B583C95F8093/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=1000(ms), Fax Nom=300(ms))
Nov 23 19:31:39.700: //84/B583C95F8093/CCAPI/cc_api_get_ssCTreRoutingNotSupported:
CallInfo(ssCTreRoutingNotSupported=FALSE)
Nov 23 19:31:39.704: //84/B583C95F8093/CCAPI/cc_api_get_ccm_detected:
CallInfo(ccm detected=TRUE)
Nov 23 19:31:39.704: //83/B583C95F8093/CCAPI/ccCallNotify:
Data Bitmask=0x7, Call Id=83htsp_call_service_msghtsp_call_service_msg not EFXS (2)
Nov 23 19:31:39.704: //83/B583C95F8093/CCAPI/cc_process_notify_bridge_done:
Conference Id=0x21, Call Id1=83, Call Id2=84
Nov 23 19:31:39.704: //84/B583C95F8093/CCAPI/cc_api_caps_ind:
Destination Interface=0x3CE27724, Destination Call Id=83, Source Call Id=84,
Caps(Codec=0x1, Fax Rate=0x2, Fax Version:=0, Vad=0x1,
Modem=0x0, Codec Bytes=160, Signal Type=2)
Nov 23 19:31:39.704: //84/B583C95F8093/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=1000(ms), Fax Nom=300(ms))
Nov 23 19:31:39.704: //84/B583C95F8093/CCAPI/cc_api_caps_ack:
Destination Interface=0x3CE27724, Destination Call Id=83, Source Call Id=84,
Caps(Codec=g711ulaw(0x1), Fax Rate=FAX_RATE_VOICE(0x2), Fax Version:=0, Vad=OFF(0x1),
Modem=OFF(0x0), Codec Bytes=160, Signal Type=2, Seq Num Start=9438)
Nov 23 19:31:39.704: //83/B583C95F8093/CCAPI/cc_api_caps_ack:
Destination Interface=0x22847B14, Destination Call Id=84, Source Call Id=83,
Caps(Codec=g711ulaw(0x1), Fax Rate=FAX_RATE_VOICE(0x2), Fax Version:=0, Vad=OFF(0x1),
Modem=OFF(0x0), Codec Bytes=160, Signal Type=2, Seq Num Start=9438)
Nov 23 19:31:39.704: //83/B583C95F8093/CCAPI/ccCallConnect:
Progress Indication=NULL(0), Data Bitmask=0x1
Nov 23 19:31:39.704: //83/B583C95F8093/CCAPI/ccCallConnect:
Call Entry(Connected=TRUE, Responsed=TRUE)
Nov 23 19:31:39.704: htsp_process_event: [0/0/0, FXOLS_PROCEEDING, E_HTSP_CONNECT]fxols_offhook_connect
Nov 23 19:31:39.704: htsp_timer_stop
Nov 23 19:31:39.704: //83/B583C95F8093/CCAPI/cc_api_voice_mode_event:
Call Id=83
Nov 23 19:31:39.704: //83/B583C95F8093/CCAPI/cc_api_voice_mode_event:
Call Entry(Context=0x230F9C10)
Nov 23 19:31:39.704: htsp_process_event: [0/0/0, FXOLS_CONNECT, E_HTSP_VOICE_CUT_THROUGH]fxols_connect_proc_voice
Nov 23 19:31:39.932: htsp_process_event: [0/0/0, FXOLS_CONNECT, E_DSP_SIG_0110]fxols_rvs_battery
Nov 23 19:31:39.932: htsp_timer_stop2
Nov 23 19:31:39.932: htsp_timer_stop2
Nov 23 19:31:48.860: //84/B583C95F8093/CCAPI/cc_api_call_disconnected:
Cause Value=16, Interface=0x22847B14, Call Id=84
Nov 23 19:31:48.860: //84/B583C95F8093/CCAPI/cc_api_call_disconnected:
Call Entry(Responsed=TRUE, Cause Value=16, Retry Count=0)
Nov 23 19:31:48.860: //83/B583C95F8093/CCAPI/ccConferenceDestroy:
Conference Id=0x21, Tag=0x0
Nov 23 19:31:48.860: //83/B583C95F8093/CCAPI/ccConferenceDestroy:
Nov 23 19:31:48.860: confID:0x21; callEntry1 callID1:0x53, type:6; callEntry2 callID2:0x54, type:1
Nov 23 19:31:48.860: //83/B583C95F8093/CCAPI/cc_api_bridge_drop_done:
Conference Id=0x21, Source Interface=0x3CE27724, Source Call Id=83,
Destination Call Id=84, Disposition=0x0, Tag=0x0
Nov 23 19:31:48.860: //84/B583C95F8093/CCAPI/cc_api_bridge_drop_done:
Conference Id=0x21, Source Interface=0x22847B14, Source Call Id=84,
Destination Call Id=83, Disposition=0x0, Tag=0x0
Nov 23 19:31:48.860: //83/B583C95F8093/CCAPI/cc_generic_bridge_done:
Conference Id=0x21, Source Interface=0x22847B14, Source Call Id=84,
Destination Call Id=83, Disposition=0x0, Tag=0x0
Nov 23 19:31:48.864: //83/B583C95F8093/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
Nov 23 19:31:48.864: //83/B583C95F8093/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
Nov 23 19:31:48.864: //83/B583C95F8093/CCAPI/cc_api_get_transfer_info:
Transfer Number=NULL
Nov 23 19:31:48.864: //84/B583C95F8093/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=16)
Nov 23 19:31:48.864: //84/B583C95F8093/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
Nov 23 19:31:48.864: //84/B583C95F8093/CCAPI/cc_api_get_transfer_info:
Transfer Number=NULL
Nov 23 19:31:48.864: htsp_timer_stop3
Nov 23 19:31:48.872: //84/B583C95F8093/CCAPI/cc_api_get_transfer_info:
Transfer Number=NULL
Nov 23 19:31:48.872: //84/B583C95F8093/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x22847B14, Tag=0x0, Call Id=84,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
Nov 23 19:31:48.872: //84/B583C95F8093/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
Nov 23 19:31:48.876: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Nov 23 19:31:48.876: :cc_free_feature_vsa freeing 3D1B9898
Nov 23 19:31:48.876: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Nov 23 19:31:48.876: vsacount in free is 1
Nov 23 19:31:48.884: htsp_process_event: [0/0/0, FXOLS_CONNECT, E_HTSP_RELEASE_REQ]fxols_offhook_release
Nov 23 19:31:48.884: htsp_timer_stop
Nov 23 19:31:48.884: htsp_timer_stop2
Nov 23 19:31:48.884: htsp_timer_stop3
Nov 23 19:31:48.884: [0/0/0] set signal state = 0x4 timestamp = 0
Nov 23 19:31:48.884: htsp_timer - 2000 msec
Nov 23 19:31:48.884: //83/B583C95F8093/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x3CE27724, Tag=0x0, Call Id=83,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
Nov 23 19:31:48.884: //83/B583C95F8093/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
Nov 23 19:31:48.884: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Nov 23 19:31:48.884: :cc_free_feature_vsa freeing 3D1B9978
Nov 23 19:31:48.884: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Nov 23 19:31:48.884: vsacount in free is 0
Nov 23 19:31:49.156: htsp_process_event: [0/0/0, FXOLS_GUARD_OUT, E_DSP_SIG_0110]
Nov 23 19:31:50.884: htsp_process_event: [0/0/0, FXOLS_GUARD_OUT, E_HTSP_EVENT_TIMER]fxols_guard_out_timeout
Nov 23 19:31:50.884: htsp_process_event: [0/0/0, FXOLS_ONHOOK, E_DSP_SIG_0100] -
7520 photo smart not connected after update
I have registered my printer on eprint web site and entered my printer code just fine, have an eprint address, I can sign into eprint and my e print name shows but after downloading the software update it now says not connected.
I still have a problem scrolling my printer Apps on the front of my printer, it shows my wireless connection but web services says cannot connect to web services, enter a proxy server address, my server does not use a proxy server.
How can I correct this please.Finally found out why I am having all the problems, HP called me on Tuesday and told me that the first update that downloaded to fix the problems made things worse and they are working on another fix to download
and update to correct all the problems we are all having with this printer.
They are going to call me back on the 27th to let me know how far along they are with the fix , until then we are all stuck with these problems so we are all just wasting our time trying to fix something that is out of our control. -
Verizon will not connect after upgrade to ios8
After upgrade, my Verizon cellular will not connect. Leaving town and must have a resolution to have access while traveling!
What did Verizon say when you contacted them?
-
MDM Repository not Connecting after Server shifting
Hi,
Here We have SAP MDM 7.1 06 on Windows Server 2008 R2 with Oracle.
Recently we have shifted our MDM Server from 1 Data Center to Another Data Center, After this change MDM Instances started successfully.
1st Problem:
Now the problem is, i am not able to connect repository (Error is: Repository connect failed, Invalid Object State). After i mount the MDM Server in console, repository not connecting.
2nd Problem:
when i right click on MDM Server in Console, even i am not able to connect Databse in DBMS Setting (Error is: Unable to connect with Database server).
Need Help to fix this issue at the earliest.
Did some searches on net and sdn forums but couldn't get right solutions.
Thanks in Advance
Thanks
AhmedDear All,
Thanks For your support.
The issue has been solved.
Problem was: MDM Server and Repository was not connecting to DB, due to sever shifting to new location with different public IP.
Solution is: when i check the tnsnames.ora file in the below location Old public IP was given so, now i just changed the newly assigned public IP, (Under file path: <Drive>:\oracle\SID\product\11.2.0\dbhome_1\NETWORK\ADMIN).
After the change and update of new public IP in tnsnames.ora, we have restart the MDM instances and DB from OS Level.
After this activity, DB connection issue was solved, then now i am able to connect to existing MDM repository.
Thanks
Ahmed -
Yahoo messenger does not connect after mountain lion upgrading
Hey,
Any experts there to solve my problem!
After upgrading to mountaion lion, the yahoo messenger can not connect to the internet, all contacts are not appearing automatically in email adress box, all editing tolls gone!!
Thanks in advance.When I opened Yahoo Messenger for the first time, it asked to use my Contacts. I said no. It took about 3 minutes to finally connect to the internet and none of the names I typed appeared in the list, just their Yahoo IDs. I then went into Security and Privacy (System Prefs) and allowed it access to my contacts and the next time I logged in, the friends list looked exactly like it should. It didn't reduce the login time, however. It still takes about 3 minutes.
I hope this helps some. -
IntelMac (newest Tiger) not connecting after installing WinXP and switching
Hi Everyone. I tried searching the discussions for this, but I couldn't find a suitable answer (or anyone else having this problem). Here's the issue (and my temporary solution, but really really annoying):
I recently installed winXP on my intelMac core duo running Tiger.8. After a bit of trouble I figured out how to connect my Windows to my Airport Express (hassle). Anyway, everytime I'd switch back to Tiger, I don't connect to my network. It's a closed network, and when it starts up, Airport connects to the network (shows all 5 bars) but I cannot get online. My temporary resolution is to turn airport off then back on, and it finds (and connects) to my network so I can surf the 'net.
The question is... is there a way that I can get around this temporary solution? (It's a bit annoying as my sister who is anti-computers has to use the 'net and gets frustrated when it's not connected.)
....Yes I realize I can just tell her how to get around the issue, but >_>..... Or if there is a way I can create a script to run at startup that will turn airport off and then on, after startup, then that would be great too....
If there is someone that can help me out, that'd be greatly appreciated!
Thanks.
iMac Intel Core Duo 2.0GHz 1.5 GB RAM Mac OS X (10.4.8) WinXP installed and can connect to airport expressI just recently installed it (maybe 3-4 wks ago?).... It's BootCamp 1.1.2, assuming newest drivers for the computer.
Yes I've noticed about the date-time thing being offset by the amount of hours I'm on the XP -- almost always 5h, too, for some reason.
I read in another post that XP might be stealing my IP address which is why I have to restart the Airport card (so I can get it back). But there's no viable solution. Happen to know any for the window's side? I'll have to ask my windows buddy this too.
In the meantime....
Do you think that there are scripts out there (or is it possible to make a script) that will automatically run when the computer restarts... and have it turn the airport card on/off? ...As well as go to date and time? I'm not very familiar with Scripting, and Automator Robot is bloody confusing....
Any help is greatly appreciated!!
Thanks.
PS - Have you tried Parallels, if you switch back n forth so often? Aside from the drivers not existing, it's great for using regular applications. I tried to use it but, honestly, the games wouldn't load because of lack of drivers for video card (and lack of "finding" the video card to get a driver for it lol)
Maybe you are looking for
-
How to disable any record in a Tabular Data Block
Hi, I have a tabular data block having 10 records, every record has a check box(1 check box on each row). I want to disable all items in that particular record where user checks the check box(check box is UNCHECKED by default). Is this possible in WH
-
Nokia X6 - How do I help Ovi map get the first loc...
Hi all, Is there a way of "manually" assisting the GPS ? Sometimes I know where I am (e.g. in a car park) and it is annoying for the phone to try to get assisted info via my data plan. Can I just tell it where I am and for it to use that info to get
-
PDF to Excel. Adobe reader XI.
Need to convert PDF to Excel. Have Adobe reader XI. Under tools do not get converting text option. WHat do I need to do?
-
Why is iTunes quitting unexpectedly each time I connect my iPhone?
All of a sudden, every time I connect my 3G iPhone, iTunes quits unexpectedly. I don't even have time to try to sync it or anything. Nyine else have this issue? What's going on?
-
Sockets and ports - routing messages between machines? helpppp!
Hi, I'm new to java and am hoping someone out there can help me, hoping this is an ok place to post this: If all you need to create a connection is an IP address and a port number, using streams... Can you route messages from A to B then from B to C,