Call of duty 4 bought but no install prompt

Hi,
I bought call of duty 4 on my old MBP, but after buying a new MBA, and trying to install from app store with same account it says to buy it?
How can I get it back on my new computer, should be free to install?
Grtz

You might get more knowledgeable help if you posted not only in the App Store forum, but also directed your question to the developer of the game; here is a link to the App Store troubleshooting page:
http://www.apple.com/support/mac/app-store/
I can't get to the app store forum right now to post the link - seems to be some sort of a glitch going on.
Edit: just got it:
http://discussions.apple.com/forum.jspa?forumID=1432
Message was edited by: Barbara Daniels1

Similar Messages

Call of Duty & G5 1.6 Install Issue

I just purchased for my dad a used G5 iMac 1.6 Ghz with the nVIDIA GeForce FX 5200 (64 MB) and he bought Call of Duty for Mac. It installed fine but when you try to play single player, it starts up and displays an orange box in a window and then goes through the promo videos, etc and then ends up at the Main Menu - the thing is, the close, expand and minimize buttons for the window are not available and the options are not selectable at all - the mose doesn't select.
Going into Multiplayer mode works fine and smooth full screen and does not have this issue.
Does anyone have an answer as to why this is happening and a possible work around? Any help would be very appreciated...

Contact the software maker, there was changes in Quicktime in the last OS update that they may have to provide a update for their software.
Sometimes a game gets old and companies just stop providing updates because nobody asks for them.

Call of Duty with i915GM loki installer, not starting

Hey,
I just installed Call of Duty with the loki installer from liflg.org.
But when i tried to run i get this error
COD 1.3 build win-x86 Mar 2 2004
----- FS_Startup -----
Current language: english
Current search path:
Z:\home\jordz\Games\CoD\main\pakb.pk3 (60 files)
Z:\home\jordz\Games\CoD\main\paka.pk3 (41 files)
Z:\home\jordz\Games\CoD\main\pak9.pk3 (149 files)
Z:\home\jordz\Games\CoD\main\pak8.pk3 (235 files)
Z:\home\jordz\Games\CoD\main\pak6.pk3 (3 files)
Z:\home\jordz\Games\CoD\main\pak5.pk3 (4858 files)
Z:\home\jordz\Games\CoD\main\pak4.pk3 (1668 files)
Z:\home\jordz\Games\CoD\main\pak3.pk3 (1992 files)
Z:\home\jordz\Games\CoD\main\pak2.pk3 (694 files)
Z:\home\jordz\Games\CoD\main\pak1.pk3 (2642 files)
Z:\home\jordz\Games\CoD\main\pak0.pk3 (12816 files)
Z:\home\jordz\Games\CoD/main
Z:\home\jordz\Games\CoD\main\localized_english_pak5.pk3 (46 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak3.pk3 (7 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak2.pk3 (9 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak1.pk3 (3736 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak0.pk3 (1204 files)
localized assets pak file for english
File Handles:
30160 files in pk3 files
execing default.cfg
couldn't exec language.cfg
couldn't exec config.cfg
couldn't exec autoexec.cfg
========= autoconfigure
configure.csv: using configuration 800 cpu MHz 256 sys MB 64 vid MB
execing configure.cfg
fs_basepath is write protected.
fs_homepath is write protected.
Hunk_Clear: reset the hunk ok
...detecting CPU, found Intel Pentium III
Measured CPU speed is 0.87 GHz
System memory is 472 MB (capped at 1 GB)
Video card memory is 64 MB
Streaming SIMD Extensions (SSE) supported
----- Client Initialization -----
----- Initializing Renderer ----
----- Client Initialization Complete -----
----- R_Init -----
Initializing OpenGL subsystem
...initializing QGL
...calling LoadLibrary( 'c:\windows\system32\opengl32.dll' ): succeeded
...setting mode 4: 800 600 FS
...using colorbits of 32
...calling CDS: ok
...registered window class
...created window@0,0 (800x600)
Initializing OpenGL driver
...getting DC: succeeded
...GLW_ChoosePFD( 32, 24, 8 )
...0 PFDs found
...hardware acceleration found
...PIXELFORMAT 1 selected
...creating GL context: succeeded
...making context current: succeeded
Initializing OpenGL extensions
GL_VENDOR: Tungsten Graphics, Inc
GL_RENDERER: Mesa DRI Intel(R) 915GM 20061017 x86/MMX/SSE2
GL_VERSION: 1.3 Mesa 6.5.2
GL_EXTENSIONS: GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_point_parameters GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_cull_vertex GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_3DFX_texture_compression_FXT1 GL_APPLE_client_storage GL_APPLE_packed_pixels GL_ATI_blend_equation_separate GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_INGR_blend_func_separate GL_MESA_pack_invert GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_NV_vertex_program GL_NV_vertex_program1_1 GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SUN_multi_draw_arrays
----- CL_Shutdown -----
RE_Shutdown( 1 )
Shutting down OpenGL subsystem
...wglMakeCurrent( NULL, NULL ): success
...deleting GL context: success
...releasing DC: success
...destroying window
...resetting display
...shutting down QGL
...unloading OpenGL DLL
Hunk_Clear: reset the hunk ok
Your video card appears to be missing one or more features required to run Call of Duty.
You should install the latest drivers for your video card, being sure to uninstall the old drivers first. If you already have the latest drivers, you should completely uninstall the drivers and then reinstall them. This fixes most problems. If the game still doesn't work, it may be that your video card does not have the minimum features required. Please check the readme for more information, including a list of supported video cards.
But i got direct rending and i tried to install the mesa-git and libgl-dri-git packages from AUR, but that didn't help.
Can somebody push me in the right direction?
Thanks
Edit:
I get this output when running codsp:
fixme:d3d:IWineD3DDeviceImpl_GetAvailableTextureMem (0x166100) : stub, simulating 64MB for now, returning 64MB left
fixme:ddraw:IDirectDrawImpl_SetCooperativeLevel (0x165328)->((nil),00000008)
fixme:d3d:IWineD3DStateBlockImpl_Release Releasing primary stateblock
fixme:keyboard:RegisterHotKey ((nil),0,0x00000001,9): stub
fixme:keyboard:UnregisterHotKey ((nil),0): stub
Last edited by jordz (2007-04-11 21:48:47)

When he installed the new fibre hub, did he use his laptop to take settings off old white hub and put it on new one?... way to check is dial into the hub ( 192.168.1.254 ) go to setting and then wireless, and see if the hub name and key are the same that is printed on card and back of hub....as this could be your problem...one thing to try is set the new hub back to default ( you will have to reconnect anything that uses wireless ) and see if this sorts it out.

Call of duty advanced warfare store error

I bought add color to the war game Call of Duty advanced, but can not download the amount was withdrawn from my account

Hey villan303,
You can, indeed, pre-order the Xbox One Limited Edition Call of Duty: Advanced Warfare bundle at your local store! A deposit will be required to reserve your console, but for full details I'd encourage you to speak with an on-site gaming specialist or rep at the store's customer service desk.
Thanks for your interest in pre-ordering with us!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Call of DUty and COD:UO not even downloading on intel

Ok, so call of duty has been a problem since i just got my new computer. at first I heard to not even install it because it just wouldn't work. then i read that someone had installed it. so i tried. I put in the call of Duty CD. I install....okay.. now I go to install the COD patch 1.5. it stops installing immediately... i try again...same. SO i then decide to start over but skip the patch till later and go straight to installing the COD:UO disk. same thing, the CD stops spinning and the download stops immediately. what is going on here. I am about to toss my computer out the window. and before anyone tells me to clean the Disk...I actually burned New Disk so there is no blemishes at all. I knew the Intel switch felt wrong.. mac owner since Apple IIc......HELP!!

Whats the Model number of your router. Assuming you have a G router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Below the setup tab, change the MTU from Auto to Manuall, and change the Size from 1500 to1365 and click on Save settings.
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>
Click on Advanced Wireless Settings...
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings"
Now see if you can are able to play games on both the computers. If you still face the same problem you can Upgrade the firmware of your router.
Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop.
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

WRT150N Call of Duty 4 cannot access game servers

I have a wrt150n and am trying to play Call of Duty 4, but there are no servers that show up in the list when i try to join multiplayer. I have tried a few things and Linksys phone support has had me try to forward port 28960. They had me do this under port range triggering. It did not help. If I try to forwared under single or port range forwarding, I can't get my settings to save. Anyone with a suggestion would be greatly appreciated.

Make sure that you have updated Cod4 to the latest update or it wont show any
servers ... I have a N150 updated the Firmware on it to 1.50. Dont have any issue getting on Cod4 servers.

I brought Call of Duty 4-

I have brought Call of Duty 4- but it is not showing up in my purchase list anymore, is there any way I can get it back on my list without have to repurchase it?

Try logging in and out of your iTunes account.

Doom 3 or Call of Duty 2 on Mac

Just curious.... has anyone tried running Doom 3 or Call of Duty 2 on their 12" PB?
If so, what specs, and how did it run?
I can run Call of Duty (1) with full detail/quality settings and I get 30-35fps on battery and 60-65fps on AC power

Doom 3 ran pretty well at medium quality settings. I've not yet had an opportunity to try Call of Duty 2, but I'm hoping (wishing!) they come out w/ a demo to try.
I run Call of Duty 2 on a Celeron 2.6 w/ the same FX5200 as my PowerBook, but with 128MB of vRAM.
Honestly, I was surprised how well it ran on my Celeron...I run it at 1024x768, no AA, Bilinnear, DirectX 7 only.

Just purchased call of duty 4 on my macbook pro 10.6.8 4GB but will not launch or open. Any suggestions, please.

just purchased call of duty 4 on my macbook pro 10.6.8 4GB but will not launch or open. Any suggestions, please.

Installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you. Restart your Mac after the combo is installed. It's ok to do this even though you are already running v10.6.8. Then try launching the app.
if that doesn't help, try contacting the developer of the app > http://support.aspyr.com/home

I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to insta

I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

Hi, i downloaded call of duty black ops on my iMac, and i had in app purchases, and it asked me if i wanted to restore them, but an error occured and I had to click cancel, now I don't know how to restore the in app purchases, does anyone know?

hi, i downloaded call of duty black ops on my iMac, and i had in app purchases, and it asked me if i wanted to restore them, but an error occured and I had to click cancel, now I don't know how to restore the in app purchases, does anyone know?

The developer would know, at least they should help troubleshooting.

I dont have credit card or money but i have to download call of duty 4 free in my mac what shoul i do plz help me urgent :)

i dont have credit card or money but i have to download call of duty 4 free in my mac what shoul i do plz help me urgent

Sorry but there are no free versions of Call of Duty4 available from the App Store.

Call Of Duty LAN Servers does not work after installing Mavericks on my Mac Air, I need help!

Hey everyone, I have some troubles making LAN servers on Call of Duty 4 and people can't join them after installing Mavericks on my Macbook Air. I need help!
Thx!

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I bought the product and got serial number but when install i get a 7 day trial

i bought the product and got serial number but when install i get a 7 day trial

Sign in or activation errors
For anything else contact serial and activation support directly.
Mylenium

So i install the itune on my new computer and im trying to download my movies that i bought but its asking for my to authorized my computer what does that mean?

so i install the itune on my new computer and im trying to download my movies that i bought but its asking for my to authorized my computer what does that mean?

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(101578)

Call of duty 4 bought but no install prompt

Similar Messages

Maybe you are looking for