Call Park service causing high CPU usage

Hi,
I've got a Lync 2013 pool with 4 servers running. Everything is working fine except I notice that when I enable the call park service, the CPU usage goes from hovering at around 4% to jumping all over the place (anything from 11% to 30%). I've
not seen this behaviour on any other Lync platform I have deployed.
All machines are virtuals, running 2 Sockets with 8 cores each. Each server has 25GB of RAM. Any perfmon report I run only confirm that the Call Park Service is using a lot of CPU resource (compared with other services)
Any help greatly appreciated.
Thanks
Mike

Please check if the CPU usage drops down when you stop the call park service.
Please check the Call Park Configurations are correct by articles at
http://technet.microsoft.com/en-us/library/gg399014.aspx
Lisa Zheng
TechNet Community Support

Similar Messages

Adobe stuffs cause high CPU usage

I just download Creative Cloud a few days ago for Primiere CC and since then there is always something from it that causes ~50% CPU usage. I tried to end the process by Task Manager and something else just replace the previous one's place. Sometimes it's CEP Service Manager, sometimes it's Core Sync, CEF Helper, etc. and it's driving me nut! I mean like right now Firefox only takes about 20% while those things just sky rocket the CPU usage. What should I do? How do I stop this?

Since I installed CC, my laptop has been running very hot too.

Mixer window can cause high CPU usage, crashes

This is probably one of the weirdest bugs I've seen for a while. Here are the steps that I reproduce it for me, maybe someone will want to try this out and see if they get the same.
1) Open an Empty Project template.
2) Create 16 instrument tracks when it gives you the dialog. (even 1 will be enough, but the effect is clearer the more tracks you create)
3) Open the mixer. Either in a window or in the pane.
4) Now create a "multi-timbral" instrument track with the plus button (use the checkbox there).
5) Select the 16th track, and now select one of the arrange tracks of the multi-timbral instrument.
6) Open up Activity Monitor from your Utilities folder in Finder and see how much Logic is taking up CPU. It should be significantly higher than the idle state. On my MBP it'll be around 80%.
This is not a problem in itself, because when reproducing it like this the high CPU usage goes away when you select another track and won't return if you select the multi-timbral instrument again.
However, I have sessions where this will continue happening with a multi-timbral instrument all the time. Not only that, I've had Logic crash when this starts happening. And this whole thing will slow down the UI considerably when it's active.
The workaround that seems to work for me is simply not keeping the mixer window/pane open.

This is one of the issue which has already been raised to Microsoft and hopefully a public build will be available soon in next cumulative update pack .
There are variety of reason for this starting for password mismatch or password not given , SFTP adapter unable to connect and so on .
There is good post here in below link for this issue
http://thoughtsofmarcus.blogspot.co.uk/2013/06/leaving-password-blank-in-biztalk-2013.html
Another greate artcicle is by Nino which states these issues .SFTP adapter is protocol sensitive and some configuration by server side, can cause a lot of crazy situations
http://ninocrudele.me/2014/01/29/checkstat-and-sftp-adapter-issues/
Thanks
Abhishek

Wake-On-Lan (WOL) after sleep causes high CPU usage

Hi,
I noticed a problem with constant high CPU usage on one of my cores.
As much as 60% was used.
The problem occures after I put the system to "sleep" (S3 state) and perform a WOL with a "magic packet".
I discovered that ACPI.sys+0x1af44 thread was responsible (using sysinternals ProcessExplorer) under the System process.
If i perform WOL while the machine was shut down everything works perfectly.
My NIC is "Realtek PCIe GBE Family Controller" and I'm using the latest drivers.
I discovered that if I disabled the option in Power Management for the device: "Allow this device to wake the computer", the CPU usage immediately went to normal (without restarting). But enabling it back the high CPU usage resumes. Performing
another sleep and awaking the system with power button "resets" the CPU usage issue for "good". Until i WOL from sleep again ofcourse..
I contacted the motherboard manufacturer of the problem but so far no real answer.
I'm saddened because I need the WOL feature.
I'm hoping somebody who has more insight in the behaviour of ACPI on W7 can answer my questions.
Regards
Specs:
Model Name : GA-X58A-UD7(rev. 2.0)
M/B Rev : 2.0
BIOS Ver : FC
Serial No. :
Purchase Dealer :
VGA Brand : Nvidia      Model : 7950GT
CPU Brand : Intel      Model : i7 950      Speed : 3.06GHz
Operation System : Win 7 64-bit      SP :
Memory Brand : Corsair      Type : DDR3
Memory Size : 6GB      Speed : 1600MHz
Power Supply : 450 W

Hi,
I noticed a problem with constant high CPU usage on one of my cores.
As much as 60% was used.
The problem occures after I put the system to "sleep" (S3 state) and perform a WOL with a "magic packet".
I discovered that ACPI.sys+0x1af44 thread was responsible (using sysinternals ProcessExplorer) under the System process.
If i perform WOL while the machine was shut down everything works perfectly.
My NIC is "Realtek PCIe GBE Family Controller" and I'm using the latest drivers.
I discovered that if I disabled the option in Power Management for the device: "Allow this device to wake the computer", the CPU usage immediately went to normal (without restarting). But enabling it back the high CPU usage resumes. Performing another sleep
and awaking the system with power button "resets" the CPU usage issue for "good". Until i WOL from sleep again ofcourse..
I contacted the motherboard manufacturer of the problem but so far no real answer.
I'm saddened because I need the WOL feature.
I'm hoping somebody who has more insight in the behaviour of ACPI on W7 can answer my questions.
Regards
Specs:
Model Name : GA-X58A-UD7(rev. 2.0)
M/B Rev : 2.0
BIOS Ver : FC
Serial No. :
Purchase Dealer :
VGA Brand : Nvidia      Model : 7950GT
CPU Brand : Intel      Model : i7 950      Speed : 3.06GHz
Operation System : Win 7 64-bit      SP :
Memory Brand : Corsair      Type : DDR3
Memory Size : 6GB      Speed : 1600MHz
Power Supply : 450 W
same prob here. has anyone found a solution?
...stephen

What Causes High CPU Usage Even When PC is Idle

How can I fixed the high cpu usage on my pc?

mcmillan wrote:
rohankolay wrote:Right now i have kernel26-2.6.35.4 which i updated on 27 aug. That is around the same time the problem began.Should i downgrade it to kernel26-2.6.35.3 or kernel26-2.6.34.3?
I think most people have been seeing the problems in any of the 2.6.35 kernels, so 2.6.34.3 would be my recommendation
+1
And put kernel26 in IgnorePkg.

Applet causes high CPU usage

Hallo,
I have a strange problem with my applet. It displays medical images. After loading Image the CPU usage of java jiumps to 100% on single core processors and to 50% on 2 core processors, and stays high, without any interaction of user. I've used Java VisualVM to profile the applet and it says that: javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run() 94.76343 787851 ms (94,8%) 58823 times invoked is
I'm not sure this is the cause of the problem. I don't use any loops while noone is interacting with the applet. Has anyone idea or suggestion what's going wrong?
This CPU load is independent of browser and operating system. I've profiled it on firefox.
with regards
Rafal Ziolkowski

Good job figuring it out.
Rule of thumb to prevent future problems: the paintComponent is used for painting and should do nothing else - setBorder() is a state change and thus does not belong in the paintComponent() method. You can all relate it back to a general programming rule of thumb: a function or method should perform only one task.

Persistent Active Requests causing high CPU usage and load average

Hi, we've deployed a JSP application on standalone OC4J talking to Oracle DB. The whole thing runs on Sun Solaris. On some occasions (still investigating what causes this), the number of active requests rises (as seen from EM console) and never drops down. The weird thing is, the load average numbers are proportional to the number of persistent active request. If there are 3 active requests, load avg will be [3.x 3.x 3.x], and whenever persistent active request exist, CPU usage will shoot up to over 90% (usually between 95% - 100%). When the system is running normally, CPU usage is usually less than 20%. Is it possible to track down this problem and how? Many thanks.

BlueAeon
Welcome to Apple Discussions!!
The icons on the right of the menu bar … show a beachball when I put the cursor over themWell, if this was your only problem I would put it down to a corrupt preference or cache file. Nevertheless, it is worth seeing how much this helps.
The file you need to trash is 'systemuiserver.plist'. But there are potentially two of them, plus it is best to delete your caches as well, so ...
In "/Users/<yourname>/Library/Caches", delete everything
In "/Users/<yourname>/Library/Preferences", delete com.apple.systemuiserver.plist
In "/Users/<yourname>/Library/Preferences/ByHost", delete com.apple.systemuiserver.xxx.plist where 'xxx' is a 12 digit (hexadecimal) numeric string.
See if this improves the situation, and post back with any remaining oddities.

NMIndexStoreSvr.exe causes high CPU usage

Within 2 - 24 hours after I restart my computer I'll notice that the CPU fan is very loud. When I open Windows Task Manager the CPU is at 95-100% usage. When I look at processes I see that the file "NMIndexStoreSvr.exe" is the biggest culprit. When I end that process, my CPU usage drops to 5% almost immediately.
Ending this process does not seem to affect Itunes. Has anyone else run across this. Is there a fix or a way to keep that file from running when I start up Windows?
Any help will be greatly appreciated.

Hi Adrian1988,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the audiodg.exe error message. I did some research into that message and as you mentioned most of it is for Windows 7, I can find very little for Windows 8. What other games do you notice this issue with? I looked into DOTA2 and it lists XP, Vista and Windows 7 under the requirements but doesn't mention Windows 8.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

BizTalk 2013 SFTP Adapter : Host Instance configured for SFTP Receive cause high CPU usage

Hi,
Our BizTalk 2013 Server test env have 16 GB RAM. We have one SFTP Receive Location which is using a dedicated Host instance for SFTP receive.
As soon as we start this SFTP Host Instance it starts consuming 50-60% CPU. (Even when it is not handling any file receive)
As suggested in below thread, to fix this issue, we changed the SFTP RL default configuration. i.e. Changed polling interval from default 0 sec to
10 minutes and also changed the RL Schedule window to business hours only.
https://connectedpawns.wordpress.com/2014/04/13/biztalk-2013-sftp-adapter-biztalk-host-receiving-throttled-because-processmemory-exceeded-the-configured-throttling-limit/#comment-2602
Even after changing the RL configuration , the Host Instance continuously consumes ~60% CPU.
Any suggestions to troubleshoot more on this issue ?
Thanks in advance !!
Anoop

This is one of the issue which has already been raised to Microsoft and hopefully a public build will be available soon in next cumulative update pack .
There are variety of reason for this starting for password mismatch or password not given , SFTP adapter unable to connect and so on .
There is good post here in below link for this issue
http://thoughtsofmarcus.blogspot.co.uk/2013/06/leaving-password-blank-in-biztalk-2013.html
Another greate artcicle is by Nino which states these issues .SFTP adapter is protocol sensitive and some configuration by server side, can cause a lot of crazy situations
http://ninocrudele.me/2014/01/29/checkstat-and-sftp-adapter-issues/
Thanks
Abhishek

Flash Player Causing high CPU usage NT Kernel

Hi
I have windows 7 with Firefox 26 and noticed that the NT Kernel and system process is running my cpu at 50% - I have a dual core.
After some research and testing I have realised that it is flash causing it when a site opens like Ebay for exapmple.
If I deactivate the plugin all is fine - cpu at about 7 - 20%. Ebay etc will ask to activate the plugin and the CPU jumps.
Same thing with other flash sites. Facebook etc
No issues with the other browsers - Chrome and IE.
I have tried uninstalling flash and firefox - and then doing a clean install but not fixed.
I tried posting on the firefiox forum and they recommended to come here.
Any thoughts?

HeCTiC wrote:
No that would be too much pain I think - copying everything across again.
No, no, no... I mean create a new admin account JUST FOR THE PURPOSE of testing the installer. It'd be a totally blank, empty account.
THAT'S the best way to determine if your account has permissions issues. If the installer and Flash Player works, as it does on your wife's account, you'll know where the trouble lies... in your account, which may or may not mean you have to move everything over. If this isn't something "liveable", then move stuff. If it IS liveable, then I wouldn't bother.

New form fields cause high CPU usage

I have a document created by printing an AutoCAD drawing. As soon as I place a text field (form) in the document, Acrobat freezes for about 2 minutes and Acrobat.exe more than 50% of the CPU. This happens with each text field placed.
To make things more interesting, I was doing this with Acrobat X. Rather than wait, I moved to another computer with Acrobat 9 and tried again on the same document. The same thing happened. This seems to be document related. The one page document 11x17 is206k in size.
Any ideas?
Bob

Since I installed CC, my laptop has been running very hot too.

MF4700 Series driver causes high cpu usage

Hello, I just purchased a Canon MF4770 Multifunction laser printer. After installing the Linux driver my Ubuntu system reports that the driver c3pldrv is using 25% of my cpu. The computer is running hot and the fan constantly blows to cool the CPU down. Is there any fix for this?

Hi rfrye7533.
The Linux Version driver package includes code components that were not written by Canon USA or its affiliates. In addition, Linux exists in many different versions, and the driver cannot be tested against all of them.
Thus, Canon USA is not able to provide a support for this driver software. The driver is provided "AS IS". For assistance with the installation of the software, we recommend that you contact Ubuntu's technical support.
We understand, and sincerely apologize for any frustration you have experienced, but we hope that you understand our rationale.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

XML select query causing very high CPU usage.

Hi All,
In our Oracle 10.2.0.4 Two node RAC we are facing very high CPU usage....and all of the top CPU consuming processes are executing this below sql...also these statements are waiting for some gc wiat events as shown below.
SELECT B.PACKET_ID FROM CM_PACKET_ALT_KEY B, CM_ALT_KEY_TYPE C, TABLE(XMLSEQUENCE ( EXTRACT (:B1 , '/AlternateKeys/AlternateKey') )) T
WHERE B.ALT_KEY_TYPE_ID = C.ALT_KEY_TYPE_ID AND C.ALT_KEY_TYPE_NAME = EXTRACTVALUE (VALUE (T), '/AlternateKey/@keyType')
AND B.ALT_KEY_VALUE = EXTRACTVALUE (VALUE (T), '/AlternateKey')
AND NVL (B.CHILD_BROKER_CODE, '6209870F57C254D6E04400306E4A78B0') =
NVL (EXTRACTVALUE (VALUE (T), '/AlternateKey/@broker'), '6209870F57C254D6E04400306E4A78B0')
SQL> select sid,event,state from gv$session where state='WAITING' and event not like '%SQL*Net%';
       SID EVENT                                                            STATE
        66 jobq slave wait                                                  WAITING
       124 gc buffer busy                                                   WAITING
       143 gc buffer busy                                                   WAITING
       147 db file sequential read                                          WAITING
       222 Streams AQ: qmn slave idle wait                                  WAITING
       266 gc buffer busy                                                   WAITING
       280 gc buffer busy                                                   WAITING
       314 gc cr request                                                    WAITING
       317 gc buffer busy                                                   WAITING
       392 gc buffer busy                                                   WAITING
       428 gc buffer busy                                                   WAITING
       471 gc buffer busy                                                   WAITING
       518 Streams AQ: waiting for time management or cleanup tasks         WAITING
       524 Streams AQ: qmn coordinator idle wait                            WAITING
       527 rdbms ipc message                                                WAITING
       528 rdbms ipc message                                                WAITING
       532 rdbms ipc message                                                WAITING
       537 rdbms ipc message                                                WAITING
       538 rdbms ipc message                                                WAITING
       539 rdbms ipc message                                                WAITING
       540 rdbms ipc message                                                WAITING
       541 smon timer                                                       WAITING
       542 rdbms ipc message                                                WAITING
       543 rdbms ipc message                                                WAITING
       544 rdbms ipc message                                                WAITING
       545 rdbms ipc message                                                WAITING
       546 rdbms ipc message                                                WAITING
       547 gcs remote message                                               WAITING
       548 gcs remote message                                               WAITING
       549 gcs remote message                                               WAITING
       550 gcs remote message                                               WAITING
       551 ges remote message                                               WAITING
       552 rdbms ipc message                                                WAITING
       553 rdbms ipc message                                                WAITING
       554 DIAG idle wait                                                   WAITING
       555 pmon timer                                                       WAITING
        79 jobq slave wait                                                  WAITING
       117 gc buffer busy                                                   WAITING
       163 PX Deq: Execute Reply                                            WAITING
       205 db file parallel read                                            WAITING
       247 gc current request                                               WAITING
       279 jobq slave wait                                                  WAITING
       319 LNS ASYNC end of log                                             WAITING
       343 jobq slave wait                                                  WAITING
       348 direct path read                                                 WAITING
       372 db file scattered read                                           WAITING
       475 jobq slave wait                                                  WAITING
       494 gc cr request                                                    WAITING
       516 Streams AQ: qmn slave idle wait                                  WAITING
       518 Streams AQ: waiting for time management or cleanup tasks         WAITING
       523 Streams AQ: qmn coordinator idle wait                            WAITING
       528 rdbms ipc message                                                WAITING
       529 rdbms ipc message                                                WAITING
       530 Streams AQ: waiting for messages in the queue                    WAITING
       532 rdbms ipc message                                                WAITING
       537 rdbms ipc message                                                WAITING
       538 rdbms ipc message                                                WAITING
       539 rdbms ipc message                                                WAITING
       540 rdbms ipc message                                                WAITING
       541 smon timer                                                       WAITING
       542 rdbms ipc message                                                WAITING
       543 rdbms ipc message                                                WAITING
       544 rdbms ipc message                                                WAITING
       545 rdbms ipc message                                                WAITING
       546 rdbms ipc message                                                WAITING
       547 gcs remote message                                               WAITING
       548 gcs remote message                                               WAITING
       549 gcs remote message                                               WAITING
       550 gcs remote message                                               WAITING
       551 ges remote message                                               WAITING
       552 rdbms ipc message                                                WAITING
       553 rdbms ipc message                                                WAITING
       554 DIAG idle wait                                                   WAITING
       555 pmon timer                                                       WAITINGI am not at all able to understand what this SQL is...i think its related to some XML datatype.
Also not able to generate execution plan for this sql using explain plan- getting error(ORA-00932: inconsistent datatypes: expected - got -)
Please help me in this issue...
How can i generate execution plan?
Does this type of XML based query will cause high GC wiat events and buffer busy wait events?
How can i tune this query?
How can i find that this is the only query causing High CPU usage?
Our servers are having 64 GB RAM and 16 CPU's..
OS is Solaris 5.10 with UDP as protocol for interconnect..
-Yasser

I found some more xml queries as shown below.
SELECT XMLELEMENT("Resource", XMLATTRIBUTES(RAWTOHEX(RMR.RESOURCE_ID) AS "resourceID", RMO.OWNER_CODE AS "ownerCode", RMR.MIME_TYPE AS "mimeType",RMR.FILE_SIZE AS "fileSize", RMR.RESOURCE_STATUS AS "status"), (SELECT XMLAGG(XMLELEMENT("ResourceLocation", XMLATTRIBUTES(RAWTOHEX(RMRP.REPOSITORY_ID) AS "repositoryID", RAWTOHEX(DIRECTORY_ID) AS "directoryID", RESOURCE_STATE AS "state", RMRO.RETRIEVAL_SEQ AS "sequence"), XMLFOREST(FULL_PATH AS "RemotePath"))ORDER BY RMRO.RETRIEVAL_SEQ) FROM RM_RESOURCE_PATH RMRP, RM_RETRIEVAL_ORDER RMRO, RM_LOCATION RML WHERE RMRP.RESOURCE_ID = RMR.RESOURCE_ID AND RMRP.REPOSITORY_ID = RMRO.REPOSITORY_ID AND RMRO.LOCATION_ID = RML.LOCATION_ID AND RML.LOCATION_CODE = :B2 ) AS "Locations") FROM RM_RESOURCE RMR, RM_OWNER RMO WHERE RMR.OWNER_ID = RMO.OWNER_ID AND RMR.RESOURCE_ID = HEXTORAW(:B1 )
SELECT XMLELEMENT ( "Resources", XMLAGG(XMLELEMENT ( "Resource", XMLATTRIBUTES (B.RESOURCE_ID AS "id"), XMLELEMENT ("ContentType", C.CONTENT_TYPE_CODE), XMLELEMENT ("TextExtractStatus", B.TEXT_EXTRACTED_STATUS), XMLELEMENT ("MimeType", B.MIME_TYPE), XMLELEMENT ("NumberPages", TO_CHAR (B.NUM_PAGES)), XMLELEMENT ("FileSize", TO_CHAR (B.FILE_SIZE)), XMLELEMENT ("Status", B.STATUS), XMLELEMENT ("ContentFormat", D.CONTENT_FORMAT_CODE), G.ALTKEY )) ) FROM CM_PACKET A, CM_RESOURCE B, CM_REF_CONTENT_TYPE C, CM_REF_CONTENT_FORMAT D, ( SELECT XMLELEMENT ( "AlternateKeys", XMLAGG(XMLELEMENT ( "AlternateKey", XMLATTRIBUTES ( H.ALT_KEY_TYPE_NAME AS "keyType", E.CHILD_BROKER_CODE AS "broker", E.VERSION AS "version" ), E.ALT_KEY_VALUE )) ) ALTKEY, E.RESOURCE_ID RES_ID FROM CM_RESOURCE_ALT_KEY E, CM_RESOURCE F, CM_ALT_KEY_TYPE H WHERE E.RESOURCE_ID = F.RESOURCE_ID(+) AND F.PACKET_ID = HEXTORAW (:B1 ) AN
D E.ALT_KEY_TYPE_ID = H.ALT_KEY_TYPE_ID GROUP BY E.RESOURCE_ID) G WHERE A.PACKET_ID = HEXTORAW (:B1
SELECT XMLELEMENT ("Tagging", XMLAGG (GROUPEDCAT)) FROM ( SELECT XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES (CATEGORY1 AS "categoryType"), XMLAGG (LISTVALUES) ) GROUPEDCAT FROM (SELECT EXTRACTVALUE ( VALUE (T), '/TaggingCategory/@categoryType' ) CATEGORY1, XMLCONCAT(EXTRACT ( VALUE (T), '/TaggingCategory/TaggingValue' )) LISTVALUES FROM TABLE(XMLSEQUENCE(EXTRACT ( :B1 , '/Tagging/TaggingCategory' ))) T) GROUP BY CATEGORY1)
SELECT XMLCONCAT ( :B2 , DI_CONTENT_PKG.GET_ENUM_TAGGING_FN (:B1 ) ) FROM DUAL
SELECT XMLCONCAT (:B2 , :B1 ) FROM DUAL
SELECT * FROM EQ_RAW_TAG_ERROR A WHERE TAG_LIST_ID = :B2 AND EXTRACTVALUE (A.RAW_TAG_XML, '/TaggingValues/TaggingValue/Value' ) = :B1 AND A.STATUS = '
NR'
SELECT RAWTOHEX (S.PACKET_ID) AS PACKET_ID, PS.PACKET_STATUS_DESC, S.LAST_UPDATE AS LAST_UPDATE, S.USER_ID, S.USER_COMMENT, MAX (T.ALT_KEY_VALUE) AS ALTKEY, 'Y' AS IS_PACKET FROM EQ_PACKET S, CM_PACKET_ALT_KEY T, CM_REF_PACKET_STATUS PS WHERE S.STATUS_ID = PS.PACKET_STATUS_ID AND S.PACKET_ID = T.PACKET_ID AND NOT EXISTS (SELECT 1 FROM CM_RESOURCE RES WHERE RES.PACKET_ID = S.PACKET_ID AND EXISTS (SELECT 1 FROM CM_REF_CONTENT_FORMAT CF WHERE CF.CONTENT_FORMAT_ID = RES.CONTENT_FORMAT AND CF.CONTENT_FORMAT_CODE = 'I_FILE')) GROUP BY RAWTOHEX (S.PACKET_ID), PS.PACKET_STATUS_DESC, S.LAST_UPDATE, S.USER_ID, S.USER_COMMENT UNION SELECT RAWTOHEX (A.FATAL_ERROR_ID) AS PACKET_ID, C.PACKET_STATUS_DESC, A.OCCURRENCE_DATE AS LAST_UPDATE, '' AS USER_ID, '' AS USER_COMMENT, RAWTOHEX (A.FATAL_ERROR_ID) AS ALTKEY, 'N' AS IS_PACKET FROM EQ_FATAL_ERROR A, EQ_ERROR_MSG B, CM_REF_PACKET_STATUS C, EQ_SEVERITYD WHERE A.PACKET_ID IS NULL AND A.STATUS = 'NR' AND A.ERROR_MSG_ID = B.ERROR_MSG_ID AND B.SEVERITY_I
SELECT /*+ INDEX(e) INDEX(a) INDEX(c)*/ XMLAGG(XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES ( G.TAG_CATEGORY_CODE AS "categoryType" ), XMLELEMENT ("TaggingValue", XMLATTRIBUTES (C.IS_PRIMARY AS "primary", H.ORIGIN_CODE AS "origin"), XMLAGG(XMLELEMENT ( "Value", XMLATTRIBUTES ( F.TAG_LIST_CODE AS "listType" ), E.TAG_VALUE )) ) )) FROM TABLE (CAST (:B1 AS T_TAG_MAP_HIERARCHY_TAB)) A, TABLE (CAST (:B2 AS T_ENUM_TAG_TAB)) C, REM_TAG_VALUE E, REM_TAG_LIST F, REM_TAG_CATEGORY G, CM_ORIGIN H WHERE E.TAG_VALUE_ID = C.TAG_VALUE_ID AND F.TAG_LIST_ID = E.TAG_LIST_ID AND G.TAGGING_CATEGORY_ID = F.TAGGING_CATEGORY_ID AND H.ORIGIN_ID = C.ORIGIN_ID AND C.ENUM_TAG_ID = A.MAPPED_ENUM_TAG_ID GROUP BY C.IS_PRIMARY, H.ORIGIN_CODE, G.TAG_CATEGORY_CODE START WITH A.MAPPED_ENUM_TAG_ID = HEXTORAW (:B3 ) CONNECT BY PRIOR A.MAPPED_ENUM_TAG_ID = A.ENUM_TAG_ID
SELECT /*+ INDEX(e) */ XMLAGG(XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES ( G.TAG_CATEGORY_CODE AS "categoryType" ), XMLELEMENT ( "TaggingValue", XMLATTRIBUTES (C.IS_PRIMARY AS "primary", H.ORIGIN_CODE AS "origin"), XMLAGG(XMLCONCAT ( XMLELEMENT ( "Value", XMLATTRIBUTES ( F.TAG_LIST_CODE AS "listType" ), E.TAG_VALUE ), CASE WHEN LEVEL = 1 THEN :B4 ELSE NULL END )) ) )) FROM TABLE (CAST (:B1 AS T_TAG_MAP_HIERARCHY_TAB)) A, TABLE (CAST (:B2 AS T_ENUM_TAG_TAB)) C, REM_TAG_VALUE E, REM_TAG_LIST F, REM_TAG_CATEGORY G, CM_ORIGIN H WHERE E.TAG_VALUE_ID = C.TAG_VALUE_ID AND F.TAG_LIST_ID = E.TAG_LIST_ID AND G.TAGGING_CATEGORY_ID = F.TAGGING_CATEGORY_ID AND H.ORIGIN_ID = C.ORIGIN_ID AND C.ENUM_TAG_ID = A.MAPPED_ENUM_TAG_ID GROUP BY G.TAG_CATEGORY_CODE, C.IS_PRIMARY, H.ORIGIN_CODE START WITH A.MAPPED_ENUM_TAG_ID = HEXTORAW (:B3 ) CONNECT BY PRIOR A.MAPPED_ENUM_TAG_ID = A.ENUM_TAG_IDBy observing above sql queries i found some hints forcing for index usage..
I think xml schema is created already...and its progressing as you stated above. Please correct if i am wrong.
I found all these sql from AWR report and all of these are very high resource consuming queries.
And i am really sorry if i am irritating you by asking all stupid questions related to xml.
-Yasser
Edited by: YasserRACDBA on Nov 17, 2009 3:39 PM
Did syntax allignment.

High CPU usage on 2811 router

dear support
i have a problem recently, i have a 2811 router, there are several EIGRP VPN tunnel setup on it, recently i found this router running high CPU utilization, it almost reach 80 percent at the most day busy time, when i try to find what process causing that after " show proc cpu", the summarize number not such high, it estimate not more than 20 percent. i know in old Cisco IOS there is a command "show platform health", but seem this not exist in 2800 serials any more.
so my question is what can i do next step to finding out what is causing high CPU usage, so that i can decide if the router need to be upgraded.
thanks very much

dear support
i have a problem recently, i have a 2811 router, there are several EIGRP VPN tunnel setup on it, recently i found this router running high CPU utilization, it almost reach 80 percent at the most day busy time, when i try to find what process causing that after " show proc cpu", the summarize number not such high, it estimate not more than 20 percent. i know in old Cisco IOS there is a command "show platform health", but seem this not exist in 2800 serials any more.
so my question is what can i do next step to finding out what is causing high CPU usage, so that i can decide if the router need to be upgraded.
thanks very much

Force mpd to play at 41000 sample rate (high CPU usage issue)

Playing a mp3 file with mpd causes high cpu usage but mplayer plays it without significant cpu usage.
Googling has brought be to the inference that its the issue of mpd playing with different settings (ie at higher sample_rate).
I added .asoundrc but then also mpd is not respecting it.
Basically, I want to play mpd with the same settings as mplayer plays.
My .asoundrc file:-
defaults.pcm.rate_converter "44100"
When I play a file with mplayer.
shadyabhi@archlinux-N210 ~ $ cat /proc/asound/card0/pcm0p/sub0/hw_params
access: RW_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 1024
buffer_size: 16384
OSS format: S16_LE
OSS channels: 2
OSS rate: 44100
OSS period bytes: 4096
OSS periods: 16
OSS period frames: 1024
shadyabhi@archlinux-N210 ~ $
And when I have mpd running,
shadyabhi@archlinux-N210 ~ $ cat /proc/asound/card0/pcm0p/sub0/hw_params
access: MMAP_INTERLEAVED
format: S32_LE
subformat: STD
channels: 2
rate: 48000 (48000/1)
period_size: 1024
buffer_size: 8192
shadyabhi@archlinux-N210 ~ $

shadyabhi@archlinux-N210 ~ $ zgrep SND /proc/config.gz | grep "="
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_I2C_AND_SPI=m
shadyabhi@archlinux-N210 ~ $ lsmod | grep snd
snd_seq_dummy 1479 0
snd_seq_oss 29240 0
snd_seq_midi_event 5516 1 snd_seq_oss
snd_seq 50562 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5281 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 39509 1
snd_mixer_oss 17730 1 snd_pcm_oss
snd_hda_codec_realtek 295589 1
snd_hda_intel 21837 1
snd_hda_codec 74609 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6222 1 snd_hda_codec
snd_pcm 72321 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 19537 2 snd_seq,snd_pcm
snd 58906 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6161 2 snd
snd_page_alloc 7361 2 snd_hda_intel,snd_pcm
shadyabhi@archlinux-N210 ~ $

Call Park service causing high CPU usage

Similar Messages

Maybe you are looking for