"Call Queue List" Idea

To the great folks of Apple:
We've all had the experience of using cell phones on the go and not wanting to have to pull over to look up numbers. Sometimes, before I jump in my car, I'll call the 3 or 4 numbers I intend to call one by one, then hang up before it rings. This way the numbers I intend to call are in my "recent calls" list. Why not create a Call Queue List that you could prepare and have them ready to call with the least hassle while you're on the go?
Jim Wilson

http://www.apple.com/feedback/
Regards.

Similar Messages

CUCM 9.1 native call queuing - calls stuck in queue

Hello everyone
We are using the CUCM 9.1 native call queuing feature for attendants hunt group an have the following problem - if all the attendants are busy, the next arriving call gets into queue, receiving MOH treatment, as described in documentation. But if one or more attendants gets free and ready to receive calls, queued call doesn't get transfered to his/her phone. Logging in additional attendants, logging them in and out again doesn't change anything, once the call got in queue it stays in queue.
Exact cucm release version is 9.1.1.20000-5.
Has anyone seen this? Any ideas on what traces/logs to check?

Hi,
it seems you hitting this bug CSCuc16486
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuc16486&from=summary
HTH
Anas
please don't forget to rate the helpful posts

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

Do you have a cellular plan with data and SMS activated?

Calendar colours broken suddenly, and odd new calendar called, "New List"?

Hi,
So, suddenly today iCloud has changed the colours of two or three of my calendars spontaneously after them being the same colour for months, and won't let me change them back - after a sync they just revert to whatever iCloud has decided they must now be.
I've checked in BusyCal (my default) and Calendar, and changes to either of them are just reverted on sync. There doesn't seem to be a way to change colours in iCloud itself.
Also, I now have a new calendar in iCloud all of a sudden called, "New List", with a tick next to it. If I delete it it just comes back on next sync. This doesn't appear in iCloud or in Calendar, only BusyCal.
Help?
EDIT: I'm running 10.8.5. Apple's Discussion board doesn't seem to want to let me change my device details no matter how hard I try.

This is the response I received from BusyCal support yesterday...
Something changed on iCloud recently that affects calendar colors in BusyCal. We are investigating it and will notify you once we have found the cause of the problem or a solution.
Regards,
-John
[email protected]

Queuing - Action Blocks (Queue Get, Queue Put , Queue List, Queue Delete)

Does any one know how to use Queue Get, Queue Put, Queue List, Queue Delete
action blocks?
There is neither any help documentation nor any previous queries in the forum for this.
Thanks and Regards
Khaleel Badeghar

Hi Khaleelurrehman,
1. Put something in your Queue:
   Name: MyQueue
   ID:      4711
   Example:
   - Make a ForNextLoop and use the Link Editor to fill the Queue with 10 entries.
   - Use a Local XML Variable as Message and a Assignment to set the
     Message text. So your Message will be:
     "a Message with the ID " & For_Next_Loop_0.CurrentItem
   - Put the Message and the ID in your Queue using the Link Editor
     ID: 4700 + For_Next_Loop_0.CurrentItem
2. Replace something in your Queue:
   Just refere to Queue-Name and Queue-ID to replace a Message with the
   Queue-Put-Action.
3. Get one entry of your Queue:
   Just refere to Queue-Name and Queue-ID to get the Message out of the Queue
   with the Queue-Get-Action.
4. Get a List of entries from your Queue:
   - Use the Queue-List-Action which will return a xMII-XML Structure with
     DATE and ID.
   - Use a Repeater to loop over the Output of Queue-List-Action.
   - Use a Queue-Get-Action and assign the ID of the Repeater-Output to get the
     Message for the ID.
5. Delete one Message in your Queue:
   Use the Queue-Delete-Action to delete a Message with a specific ID from
   your Queue.
6. Delete the whole Queue (or all Messages)
   Use Queue-List-Action + Repeater to loop + Queue-Delete-Action
Hope this helps.
Ciao
Martin

I'm trying to create a group call/txt list to communicate with a sports team

I'm trying to create a group call/txt list to communicate with a sports team

What does your question have to do with the topic of this Boot Camp community?

BACD and hold times for Call Queue

Hi Everyone,
Is it possible to include hold times/wait times for BACD call queues? Also, anyone run into issues when configuring BACD and the time it takes for it to ring in? We had an issue previously that where the call would enter the queue, wait 30 seconds or so, and then ring out. Unless this is normal.
Thanks as always,
HelpDesk

Hi Help Desk,
Its been a while since I configured this and I am not sure if the current versions of CCA allow for this change to take place.
I know on the command line that this is possible, but ultimately it would be better to use CCA to make the changes as I am not sure if it would recognize the change if you did it via CLI.
In the past as an alternative to hold times I did some work around's by pushing the BACD to an AA and putting in there some rudimentary options that would allow a user to go back into the line, but they would loose their position in doing so, but this shouldn't be a big problem.
Also in terms of entering the BACD, I havent see the 30 second delay before so I am not sure what is going on there and I cannot say for that that it is normal operations for it.
Cheers,
David Trad.
davidtradconsultinggmail.com

HT204135 how to re print job from print queue listing on a mac?

how to re print job from print queue listing on a mac?

Hello there! Welcome to the forums @technolingua ,
I read about how you are looking to print envelopes from Mavericks. I would suggest checking out the links below to help you out!
Create envelopes by using Mail Merge
Print Envelopes (Mac)
How to Print Envelopes on a Mac
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

BE6000 Native Call Queuing Design Constraints?

We see the doc wiki has not been updated with any UCM 9.0 native call queuing design constraints. We would assume that the call queuing at a min would need to meet the MoH design constraint of 50 sessions, since you figure there is a high probability that one call will be queued in each of 50 queues with MoH playing with each.
http://docwiki.cisco.com/wiki/Supported_System_Capacities
Is there any other performance impact we should consider or can we ask the doc wiki be updated with design constraints around call queuing?
Can the BU clarify is that is 50 simultanous MoH streams per cluster, or 50 per server? We can eliminate the load by going to multicast and IOS distributed MoH for remote sites, but something tells me there probably is a max queued call ceiling we need to consider for this platform.

At the risk of getting caught up in the pass-by-reference/pass-by-value debate :), simple values (ints chars etc). are passed as values, and modifying them on the C++ side of the procedure call will not modify the values on th java side.
Possible solutions are:
1)pass an array of (say) ints. Then, modifying individual values should modify the java-side values (much in the way that the Stream.read(byte[]) functions do.
2)format up a strin g with your return values, return the string and parse it on the java side.
3)have fields in the java side that are accessed and modified by your native call.
4)pass an object with some fields in it. Have the C++ access and modify the object's fields.
Hope this helps.

On OS 5, the contacts with international format do not show the names when they call me. any idea why?

I have updated my Iphone 4 software to OS5, and since then the names of the people who call me stopped to appear and only their number is showing. after checking, i found out that the contatcs whom local phone number is saved in an international format are affected by this problem. if i save them without the country code, then their names appear.
Also, some non local numbers that are saved in the format of 00966--------- instead of +966 ------- are also not showing the name of my contact when they call me.
any idea about this knowing that the older OS version didn't have an issue with this?
Thanks

This is the same problem I have. I thought it was my phone only, but now I realize it is a common thing. I hope they release a fix to this, as they did in 2007 & 2007 when 3G was released. Will be waiting and good luck to us all.

I down loaded ios6 on iphone 4s & now i cannot call out or receive calls. Any ideas on how to fix this?

I downloaded ios6 on iphone 4s & now cannot call out or receive calls. Any ideas on how to fix this?

What if you repair your phone with PCC
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Call Queue Software Options

Hello,
I have alot of customers in the medical field and have deployed UC500's pretty successfully. Does anyone have any suggestions on call queue software that works with UC series really well. The AA does a good job but if patients calling in get VM, the just call back and back, so I am looking for a solution where they wait in a queue, then are transfered to the first availble phone in a particular department, kind of what a call center does. Thanks in advance for any suggestions.

Hi Mark,
One of the tricks I did to get the BACD to be a little more clever was to have its final destination point to the AA, then I set the AA prompts to do the following:
Announcement - "Thank you for continuing to hold, all our operators are currently busy so please choose from one of the following options" (Make this similar to the BACD Announcement)
1. Press "1" to continue to hold (This will send them back into the BACD)
2. If this is an emergency press "2" to speak to someone immediately otherwise dial (911 or 000 or what ever the emergency number is in your region) - Make sure this is pointing to a separate DN on each of the phones and mark it as the emergency extension
3. Or if you wish to be called back press "3" and leave a detailed voice mail and one of our staff will call you back shortly
This is the method I used for various medical center roll-outs, it worked quite well and in fact in some cases worked better than their previous system.
However, Please try and avoid doing this on a live system as it can be a little fiddly to setup, but once it is setup it does the job quite nicely
Cheers,
David Trad.
davidtradconsultinggmail.com

Calling different lists in command action in j2me

I have created a midlet with multiple lists and after user select one list element he will be directed to another list.I want to call these lists in command actions using List.SELECT_COMMAND and list_one.getselectedIndex( ).It works for only first list and "done" is displayed on listScreen1 when the first index of listScreen1 is selected . As well as again "done " is displayed when the first index of ListScreen2 is selected.How Should i over come from here?I have used switch case also for this instead of If condition and same problem exists.Please help me.Thanx a lot.
if (c==List.SELECT_COMMAND )
if(listScreen1.getSelectedIndex()==0)
Display.getDisplay(parent).setCurrent(ListScreen2);
ListScreen2.addCommand(BACK);
ListScreen2.addCommand(OK);
ListScreen2.setCommandListener(this);
if(listScreen1.getSelectedIndex()==1)
Display.getDisplay(parent).setCurrent(ListScreen3);
ListScreen3.addCommand(BACK);
ListScreen3.addCommand(OK);
ListScreen3.setCommandListener(this);
if(listScreen1.getSelectedIndex()==2)
Display.getDisplay(parent).setCurrent(ListScreen4);
ListScreen4.addCommand(BACK);
ListScreen4.addCommand(OK);
ListScreen4.setCommandListener(this);
else
System.err.println("Unexpected choice...");
return;
if (c==List.SELECT_COMMAND )
if(ListScreen2.getSelectedIndex()==0)
ListScreen2.append("done", null);
}

Hi,
there are more problems. I'd say that you will see many times displayed the "Unexpected choice..." message. But the main problem is you are testing all screens at the same time despite any application/screen status. You don't know where you are (on what screen) and you test multiple screens. So the done is always added to the screen 2 (because the condition is always true). Only if current screen is no.2 you just see added content.
So:
- add some more precise application screen/state logic
- manage the screens - you have existing instances of the screens but you multiple times add content and commands
- make corrent conditions
- use CODE tag during editing to enter the code, otherwise it's very bad readable.
Rada

Cisco CUCM 9.1 Call Queuing no Ring Back

I have a customer that has a hunt group that has 6 users in it, they are routing the calls by longest idle. The way the customer handles the inbound call is with the operator-> then they transfer the call to the hunt group. They want to be able to present MOH when they transfer to the hunt group. I enabled Call Queuing for this hunt group and set the MOH source to the customers recording , and work great as long as all agents are busy. When the callers are trasfered to the hunt and agents are available they hear the ringback tones as the call goes from agent to agnet until it gets answered. The customer is wanting to eliminate the ringback tone during the hunt cycle and just play MOH. I know this is possible with UCCX, but they are not willing to purchase UCCX. Is there any way i can silence the ringback tone and have MOH while the call is hunting?

Hi, there is a product intended exactly to do that:
http://www.imagicle.com/go/queuemanager
It extends the embedded call queuing capabilities and is already certified with 9.1, available in solution catalog and also providing advanced historical reporting.
Licensed per channels and not per operator/agent, cheap, dramatically EASY to deploy, config and manage.
Offer a free of charge supervisor app on iPAD and can be combined with the imagicle operator console (http://www.imagicle.com/go/bluesattendant) for a full, professional, out of the box customer service solution.
You can contact imagicle for more info or download the free 30 days eval.
Regards.
Christian Bongiovanni
coCEO and CTO
Imagicle SpA

"Call Queue List" Idea

Similar Messages

Maybe you are looking for