Call RFC from ECC and display the values in AET

Hi ALL,
I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
In getter method of tat AET field what code should i write?
Plz help me on this.

HI,
1) Call the RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
AET FIELDS :    zzfld00000M    zzfld00000N
Description :    Budget Quan    Forecast Quan
values         :    (--5.0)(6.0--
2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
Edited by: venkatabharathv on May 23, 2011 2:44 PM
Edited by: venkatabharathv on May 23, 2011 2:49 PM

Similar Messages

Read integer values from spreadsheet and display the values in a table

Hi all,
I have integer values to read from a spreadsheet and display them in a table. I am using 'Read from spreadsheet file' in 'integer' mode. I would like to display these values in a table. The problem is that the table takes only 2d-array of string as input but not integer.
It works fine if I change the mode of 'Read from spreadsheet file' from 'integer' to 'string' but I want to read integers and have to use the integer values for further calculations. Please give any suggestions on displaying integers to a table.
Thank you.
Solved!
Go to Solution.

No don't take element by element just convert as a whole. See the attached example
Good luck
The best solution is the one you find it by yourself

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.
I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt.
So I guess I'm asking if you can use cli_exec and other commands in the "namespace import ::cisco::eem::*" in a normal non-EEM script - can I do that?
This is the error I get:
OTN.159(tcl)#source flash:TCL_SNMP_Remote_Read.tcl
invalid command name "::cisco::eem::event_register_none"             ^
% Invalid input detected at '^' marker.
What am I missing?
================= TCL_SNMP_Remote_Read.tcl ==============================
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if [catch {cli_open} RESULT]
    { error $RESULT $errorInfo }
    else { array set cli1 $RESULT }
if [catch {cli_exec $cli1(fd) "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0" } RESULT]
       { error $RESULT $errorInfo }
       else { set SnmpSysDesc $RESULT }
if [catch {cli_close $cli1(fd) $cli1(tty_id)} RESULT] {
            error $RESULT $errorInfo
puts $SnmpSysDesc
=========================================================================
In the sho-run config I have:
event manager directory user policy "flash:/"
event manager session cli username "cisco"
Any help to get me started would be greatly appreciated!
Tim

If you don't want an EEM policy, then don't use any of the EEM constructs. Instead, all you need is this:
set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

How do I click on a cell in a table control, and display the value in a string?

What I would like to do is to click on a cell in a table control, and have the value of the cell be displayed in a string indicator. What ever cell I click on, I would like the value to be displayed in the indicator.
Thank you!
Solved!
Go to Solution.

... or
Event >>> ouse down for table.
Use Coords" to feed invoke node "point To Row Column" and returned "Cell Postion" can be unbundled to produce the row and column tht can be used to index out the value.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Can i pass plsql table as parameter in a report and display the values

Hi.I have a form with five text items.
Also inside the form I have a button and when I push the button the trigger fires(WHEN BUTTON PRESSED) and the values of the form passed and display in the report.Is it possible to have in the form a detail for example with three rows and three columns and with some way(mayby as plsql table) pass all the parameters from the form to report and then display in the report?I asume the report is a tabular report.
Thanks in advance Panagiotis.

Hi Nigel,
By default, SharePoint will display folder icon for document sets in the search results.
If you need to change this icon in search results, then you can modify the display template for document sets.
http://blogs.technet.com/b/tothesharepoint/archive/2013/09/04/understand-how-search-results-are-displayed-in-sharepoint-server-2013.aspx
How did you set query in the Result Source?
I tested the query below in the result source in my environment, and it worked fine.
{searchTerms}ContentTypeID:0x0120D520*
I recommend to check if the document sets have been crawled in crawl log.
If not, please run a full crawl in Search Service Application and then check the results.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Fetch field values in GTS system from ECC and missing field values

Hi,
I am developing Adobe Form "Certificate of Origin" in GTS (Global Trade Services) system. I require to get Customer PO and Country of Origin from ECC system for each line of Invoice (VBKD-BSTKD and EIPO-HERKL respectively). Pls let me know, how can I get these values from ECC to my Adobe Form?
Also for the "Commercial Invoice" form, value of below fields are not coming in GTS. Pls tell me, if there is any another way I can get data for these fields ?
1. Tax Number
2. Tracking Number
3. Estimated Export Date
4. Payment terms
5. Carrier
6. Package count
7. Net wt and Gross wt.
Thanks !!!

Hi Sri,
you must align SD0C level.
Go to SPRO --> SAP Global Trade Services --> SAP Customs Management --> Document Structure --> Assignment of Item Categories from Feeder Systems --> Assign Item Category at Feeder System Group Level
For Example: SD0C TAN CLPOS Standart Item
When you are done, just re-execute LUW in SM58.
Regards,
Gabriel.

How to calculate the value from prompt and use the value as filter

Hi everyone,
I am designing a OBI query. I want to write a query and one of it filters comes from the dashboard prompt. Say I want to make a query to pull out the record for 3 consective years and user wants to enter the last year # and omit entering the first 2-year code#.Thanks!

Hi,
if i understand your question
you have a prompt for year.. and it's assigned with presentation variable, say: var_year
And you are just entering value for only one year, say 2000.
Then, the request (which is using that prompt value as filter) should display year values 2000, 2000-1 (i.e. 1999), 2000-2 (i.e. 1998).
Is this your requirement?
If then,
Hope you are using edit box as control for year prompt and assign a presentation variable for that prompt.
Now, in report go to filter of year prompt, click on advance > Convert this filter to SQL.
write here... *Times.Year between @{var_year} and @{var_year}-2*
And make sure that your var_year is integer, if not cast it to integer

How to delete formula from cells and keep the values in Excel VBA

Hi,
In my Excel I have 15 columns. In column F which has a formula (INDEX MATCH), it has contains "RECEIVED" and "INTRANSIT". I need to filter the column F for all "RECEIVED" and then remove the formula from cells and
retain or keep the values that are already in the cells. something tricky and i'm not sure on how to work on this in Excel VBA.
Below is my initla VBA code:
I already have the codes on how to filter. kindly please help me on how to do this. thank you in advance.
Sub test_Click()
Dim wb As Workbook
Dim ws As Worksheet
Dim rng As Range
Dim lrow As Long
Set wb = ThisWorkbook
Set ws = wb.Sheets("Intransit_")
Application.ScreenUpdating = False
ws.AutoFilterMode = False
With ws
lrow = .Range("F" & Rows.Count).End(xlUp).Row
Set rng = .Range("A1:R" & lrow)
Debug.Print rng.Address
rng.AutoFilter Field:=6, Criteria1:="RECEIVED"
End With
Application.creenUpdting = True
End Sub

Solved.
Sub test_Click()
Dim wb As Workbook
Dim ws As Worksheet
Dim rng As Range
Dim lrow As Long
Dim rRec As Range
Dim btField As Byte
Set wb = ThisWorkbook
Set ws = wb.Sheets("Intransit_")
btField = 6
Application.ScreenUpdating = False
ws.AutoFilterMode = False
With ws
lrow = .Range("F" & Rows.Count).End(xlUp).Row
Set rng = .Range("A1:R" & lrow)
With rng
.AutoFilter Field:=btField, Criteria1:="RECEIVED"
On Error Resume Next
Set rRec = .SpecialCells(xlCellTypeVisible)
On Error GoTo 0
End With
.AutoFilterMode = False
If Not rRec Is Nothing Then
With rRec
.Columns(btField).Value = .Columns(6).Value
End With
End If
End With
Application.ScreenUpdating = True
End Sub

Call a JSP from applet and display the results in the browser

Hello All,
I have written an applet which performs some functionality at the clinets browser. When the applets method finishes exectution, I would like to call
a jsp. The results of the JSP should be displayed like a normal page in the browser.
I tried creating a HttpURLConnection and calling the jsp but two things happened
1. The jsp call failed because the applet doesn't have a valid session id.
2. even if I disable the valid user check at the jsp, the results of the jsp are returned as a set of bytes to the applet. They are not displayed in the browser window.
Then I tried applet.getAppletContext().showDocument()... However with this api I cannot do a POST operation on the JSP with some input data because this takes only a URL as an input parameter.
Please help me in this problem and I will be very gratefull to you.
1. applet uses the same session id as the browser so that when applet makes a request to the jsp it does not get user invalid exception.
2. the results of the jsp are displayed on the browser and not given to the applet.
Thank you so much for your help.
regards,
Abhishek.

I hope this can help you
I made a package calls fun
and a clsss calls JspTestingFun
package fun;
public class JspTestingFun{
private String sample = "welcome to jsp";
//Access sample property
public String getSample() {
    return sample;
//Access sample property
public void setSample(String newValue) {
    if (newValue!=null) {
      sample = newValue;
}then I make a jsp file
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<%@ taglib uri="http://java.sun.com/jstl/sql" prefix="sql" %>
<%@ page import = "fun.JspTestingFun"%>
<html>
<head>
<title>
jspTest
</title>
</head>
<jsp:useBean id="mytest" scope="session" class="fun.JspTestingFun" />
<jsp:setProperty name="mytest" property="*" />
<body bgcolor="#ffffff">
<%
mytest.getSample();
%>
<h1>
Just for testing
</h1>
<form method="post">
<br>Enter anything   : <input name="sample"><br>
<br><br>
<input type="submit" name="Submit" value="Submit">
<input type="reset" value="Reset">
<br>
this what we get<jsp:getProperty name="mytest" property="sample" />
</form>
</body>
</html>

Reading data from table and print the value based condition

hi
my table like this
slno | value1 | value2 |
1            0            5
2            5           10
3           10          15
assume n= 8 ( where n is user define)
i want output like
number 8 between value 5 and 10
plz help

Hi,
Try:
Select 'Number '+ U_Value3 + ' Between '+ U_Value1'and 'U_Value2
From [dbo\].[@UDT T0\]
Where T0.U_Value3=[%0\] and T0.U_Value3 BETWEEN U_Value1 AND U_Value2
Thanks,
Gordon

Trap string output from resultset and pass the value to getSchema.

I want to get the string ldb output frm the resultset and pass it to getSchemas(ldb).kindly let me know how to do it,right now it is throwing error like variable ldb might not have been initialised.
public boolean Err_getSchemas() {
boolean ret = true;
try {
System.out.println("**** Testing getSchemas Tests : - ");
if(login()) {
Statement stmt = con.createStatement();
ResultSet rs;
String ldb;
rs = stmt.executeQuery("SELECT identifier FROM ldb_catalog");
while(rs.next())
ldb = rs.getString(1);
//String ldb = rs.getString(1);
//System.out.println("lll"+ldb);
try{
System.out.println("1.Testing DatabaseMetaData.getSchemas() with string ldb");
ordbjava.jdbc.ordbMetaData dbmd = ( ordbjava.jdbc.ordbMetaData)con.getMetaData();
ResultSet dbmdrst = dbmd.getSchemas(ldb);
System.out.println(" Exception not thrown: TEST Pass ");
dbmdrst.close();
}catch(Exception ex){
System.out.println("***JDBCMetaData.getSchemas() with string ldb failure***");
System.out.println(" Catch Exception"+ex );
catch (SQLException e) {
printExceptionStack(e);
System.out.println("***ordbCollection Preparation Error Caught SQLException: " + e.getMessage());
return false;
finally {
try {
con.close();
catch (SQLException e) {}
return ret;
}

I want to get the string ldb output frm the resultset and pass it to getSchemas(ldb).kindly let me know how to do it,right now it is throwing error like variable ldb might not have been initialised.
public boolean Err_getSchemas() {
boolean ret = true;
try {
System.out.println("**** Testing getSchemas Tests : - ");
if(login()) {
Statement stmt = con.createStatement();
ResultSet rs;
String ldb;
rs = stmt.executeQuery("SELECT identifier FROM ldb_catalog");
while(rs.next())
ldb = rs.getString(1);
//String ldb = rs.getString(1);
//System.out.println("lll"+ldb);
try{
System.out.println("1.Testing DatabaseMetaData.getSchemas() with string ldb");
ordbjava.jdbc.ordbMetaData dbmd = ( ordbjava.jdbc.ordbMetaData)con.getMetaData();
ResultSet dbmdrst = dbmd.getSchemas(ldb);
System.out.println(" Exception not thrown: TEST Pass ");
dbmdrst.close();
}catch(Exception ex){
System.out.println("***JDBCMetaData.getSchemas() with string ldb failure***");
System.out.println(" Catch Exception"+ex );
catch (SQLException e) {
printExceptionStack(e);
System.out.println("***ordbCollection Preparation Error Caught SQLException: " + e.getMessage());
return false;
finally {
try {
con.close();
catch (SQLException e) {}
return ret;
}

Get data from view and displaying the table data into Excel pivot table

Hi All,
I have a small reqirement inthat When i get the data from the View that would displayed as Excel Pivot table.
For displaying gerneral data to Excel I have followed Binarcy cachey
Please suggest me in this.
Thanks,
Lohi.
Message was edited by:
Lohitha M

Try this:
http://download-west.oracle.com/docs/html/B25947_01/bcservices005.htm#sthref681
Specifically code sample 8-10 for accessing the AM object.
Then use the findView method to get a pointer to the VO.

Remote Call to Blazeds and displaying the result set in grid

Hi,
I want to call a remote method using Flex application from Blazeds and display the values in DataGrid. Can anyone help in this ?
-- I am using AMFChannel
-- The method to be called is PolicyApnVO.getPoliciesApn()
-- Please advice any correction if required
Here is the mxml code :
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                creationComplete="initApp()" viewSourceURL="srcview/index.html">
    
    <mx:Script>
        <![CDATA[
            import mx.messaging.ChannelSet;
            import mx.messaging.channels.AMFChannel;
            import mx.rpc.remoting.mxml.RemoteObject;
            [Bindable]
            public var srv:RemoteObject;
            public function initApp():void
                var channel:AMFChannel = new AMFChannel("my-amf", "http://192.168.102.208:8400/policyAnalytics/messagebroker/amf");
                var channelSet:ChannelSet = new ChannelSet();
                channelSet.addChannel(channel);
                srv = new RemoteObject();
                srv.destination="runtime-policy";
                srv.channelSet = channelSet;
                srv.PolicyApnVO.getPoliciesApn();
        ]]>
    </mx:Script>
    <mx:Panel title="Policy Details" width="100%" height="100%">
        <mx:DataGrid width="100%" height="100%" dataProvider="{srv.PolicyApnVO.getPoliciesApn.lastResult.data.result}"
                     showDataTips="true">
            <mx:columns>
                <mx:DataGridColumn headerText="APN Id" dataField="apnId"/>
                <mx:DataGridColumn headerText="APN Name" dataField="apnName"/>
                <mx:DataGridColumn headerText="Policy ID" dataField="policyId"/>
                <mx:DataGridColumn headerText="Policy Name" dataField="policyName"/>
            </mx:columns>
        </mx:DataGrid>
    </mx:Panel>
</mx:Application>

There may be other ways to do this but here's what I would do:
1) add a results method to the remote object:
src.result="onResult(event.result)";
2) add the callback method: private function onResult(event : * = null)
:void{
                                                     if(event is
ArrayCollection)
                                                            myData =
ArrayCollection(event);
3) add the variable: private var myData:ArrayCollection;
4) make the dataProvider for the grid use the my data :
dataProvider=""
You can probably avoid all this by adjusting your dataProvider. I am just
not sure what it would be without experimenting. But definitely not what
you have. Maybe just {svc.result}.

Calling and displaying BAPI values when the initial view is displayed

hi Gurus,
I am creating an application where I am calling a BAPI.
Now my problem is that the values should be called and displayed when I am starting the application ie in the first view itself.
Is there any way to execute the BAPI so as to retrieve the values from back end and get the values displayed in the initial screen/view.
Or else is there any onPageLoad method which can be used in such cases.
please help me how to go ahead.
Thanks and regards,
kris

Hi
Create a method in controller and insert the code,
wdContext.current<BAPI>Element().modelObject().execute();
And call the method in view, and check the size of BAPI's output node.If it is greater than 0, your BAPI is returning something. using any loop and get the Output
Saravanan K

Reading from a text file and displaying the contents with in a frame

Hi All,
I am trying to read some data from a text file and display it on a AWT Frame. The contents of the text file are as follows:
pcode1,pname1,price1,sname1,
pcode2,pname2,price2,sname1,
I am writing a method to read the contents from a text file and store them into a string by using FileInputStream and InputStreamReader.
Now I am dividing the string(which has the contents of the text file) into tokens using the StringTokenizer class. The method is as show below
void ReadTextFile()
                    FileInputStream fis=new FileInputStream(new File("nieman.txt"));
                     InputStreamReader isr=new InputStreamReader(fis);
                     char[] buf=new char[1024];
                     isr.read(buf,0,1024);
                     fstr=new String(buf);
                     String Tokenizer st=new StringTokenizer(fstr,",");
                     while(st.hasMoreTokens())
                                      pcode1=st.nextToken();
                           pname1=st.nextToken();
          price1=st.nextToken();
                          sname1=st.nextToken();
     } //close of while loop
                } //close of methodHere goes my problem: I am unable to display the values of pcode1,pname1,price1,sname1 when I am trying to access them from outside the ReadTextFile method as they are storing "null" values . I want to create a persistent string variable so that I can access the contents of the string variable from anywhere with in the java file. Please provide your comments for this problem as early as possible.
Thanks in advance.

If pcode1,pname1,price1,sname1 are global variables, which I assume they are, then simply put the word static in front of them. That way, any class in your file can access those values by simply using this notation:
MyClassName.pcode1;
MyClassName.pname1;
MyClassName.price1;
MyClassName.sname1

Call RFC from ECC and display the values in AET

Similar Messages

Maybe you are looking for