CALL SAP ME's WebService from MII

Hello, How can I call SAP ME's web service from SAP MII?

Hi Dmitry,
While you can't change the interfaces built into ME (in MII), you should be able to either copy or simply view them, depending upon your security settings. There should be plenty of examples in the SAPMEINT or if an older version VERPSFI content.
Good luck and if you can't figure it out here, you may want to post on the ME forum.
Regards,
Mike

Similar Messages

How to call a SAPME web service from MII

Dears,
How can I call a SAPME web service from MII such as PlaceFutureHold?
By using MII, I would like to develop some logic to check some values which query from SAPME database, if the value is out of spec, it needs to send a emal to inform user ans also hold the SFC.
Thanks!

Hi,
I can config the SAPME web service ItemServiceService
I used Config Links to assign values in request ItemByBasicDataQuery_sync, such as material, revision, site.
But get a almost empty response ItemByBasicDataResponse_sync, I wrote both web service request and response in file as below.
What did I missed? Thanks!
request:
<?xml version="1.0" encoding="UTF-8" ?>
- <ItemByBasicDataQuery_sync xmlns="http://sap.com/xi/ME">
- <ItemByBasicDataQuery>
<Item>MA1</Item>
<Revision>A</Revision>
- <SiteRef>
<Site>HP</Site>
</SiteRef>
</ItemByBasicDataQuery>
</ItemByBasicDataQuery_sync>
response:
<?xml version="1.0" encoding="UTF-8" ?>
- <ItemByBasicDataResponse_sync xmlns="http://sap.com/xi/ME">
- <Item>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
<ItemType>K</ItemType>
<IncrementBatchNumber>S</IncrementBatchNumber>
<LotSize>0.00</LotSize>
- <StatusRef>
<Status languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</StatusRef>
<EffectivityControl>R</EffectivityControl>
<Description languageCode="" />
<UnitOfMeasure languageCode="" />
<AssignSerialAtRelease>false</AssignSerialAtRelease>
- <AssyDataTypeRef>
<AssyDataType languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</AssyDataTypeRef>
- <InventoryAssyDataTypeRef>
<AssyDataType languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</InventoryAssyDataTypeRef>
- <RemovalAssyDataTypeRef>
<AssyDataType languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</RemovalAssyDataTypeRef>
<CreateTrackableSFC>I</CreateTrackableSFC>
- <BomRef>
<Bom />
<Revision />
<BomType>S</BomType>
- <SiteRef>
<Site />
</SiteRef>
</BomRef>
- <RouterRef>
- <SiteRef>
<Site />
</SiteRef>
<Router />
<Revision />
<RouterType>D</RouterType>
</RouterRef>
<CurrentRevision>true</CurrentRevision>
<DrawingName languageCode="" />
<EffectiveEndDate daylightSavingTimeIndicator="true" timeZoneCode="" />
<EffectiveEndSequence unitCode="">0.00</EffectiveEndSequence>
<EffectiveStartDate daylightSavingTimeIndicator="true" timeZoneCode="" />
<EffectiveStartSequence unitCode="">0.00</EffectiveStartSequence>
- <ItemGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<ItemGroup languageCode="" />
</ItemGroupRef>
- <MaskGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<MaskGroup languageCode="" />
</MaskGroupRef>
<MaximumUsage unitCode="">0.00</MaximumUsage>
<Panel>true</Panel>
<PreAssembled>true</PreAssembled>
<QuantityMultiplier>0.00</QuantityMultiplier>
<QuantityRestriction>W</QuantityRestriction>
- <SelectorActivityRef>
<Activity languageCode="" />
</SelectorActivityRef>
<SelectorNote languageCode="" />
- <TransferItemGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<ItemGroup languageCode="" />
</TransferItemGroupRef>
<UseCompFromDrawing>true</UseCompFromDrawing>
<IsCollector>true</IsCollector>
<CollectParentSerial>true</CollectParentSerial>
<RequiresSerialNumberChange>true</RequiresSerialNumberChange>
- <DocumentLinkList>
- <DocumentLink>
- <DocumentRef>
- <SiteRef>
<Site />
</SiteRef>
<Document />
<ModifiedDateTime daylightSavingTimeIndicator="true" timeZoneCode="" />
<Revision />
</DocumentRef>
- <DocumentContext>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
- <RouterRef>
- <SiteRef>
<Site />
</SiteRef>
<Router />
<Revision />
<RouterType>D</RouterType>
</RouterRef>
<OperationRef />
- <SiteRef>
<Site />
</SiteRef>
</DocumentContext>
<Sequence unitCode="">0.00</Sequence>
</DocumentLink>
</DocumentLinkList>
- <ItemLocationList>
- <ItemLocation>
<Location languageCode="" />
<Description languageCode="" />
<Sequence unitCode="">0.00</Sequence>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
</ItemLocation>
</ItemLocationList>
- <ItemAlternateList>
- <ItemAlternate>
- <AlternateItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</AlternateItemRef>
<Sequence unitCode="">0.00</Sequence>
<Substitute>true</Substitute>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
- <ItemGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<ItemGroup languageCode="" />
</ItemGroupRef>
<RequiredSubstitute>true</RequiredSubstitute>
<ValidAssembly languageCode="" />
<ValidEnd daylightSavingTimeIndicator="true" timeZoneCode="" />
<ValidRevision />
<ValidStart daylightSavingTimeIndicator="true" timeZoneCode="" />
</ItemAlternate>
</ItemAlternateList>
- <ItemDPMOList>
- <ItemDPMO>
<Opportunities unitCode="">0.00</Opportunities>
- <OperationRef>
- <SiteRef>
<Site />
</SiteRef>
<Operation />
<Revision />
</OperationRef>
<ForAllOperations>true</ForAllOperations>
<ForAllDpmoCategories>true</ForAllDpmoCategories>
- <DpmoCategoryRef>
- <SiteRef>
<Site />
</SiteRef>
<DpmoCategory>TERMINATION</DpmoCategory>
</DpmoCategoryRef>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
</ItemDPMO>
</ItemDPMOList>
- <TransferDataList>
- <TransferData>
- <TransferParent>
<ShopOrderRef />
- <ItemGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<ItemGroup languageCode="" />
</ItemGroupRef>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
</TransferParent>
<TransferType>N</TransferType>
- <TransferSite>
<Site />
</TransferSite>
- <AlarmTypeConfigRef>
- <SiteRef>
<Site />
</SiteRef>
<AlarmType languageCode="" />
<TypeSpecific>true</TypeSpecific>
</AlarmTypeConfigRef>
<DefaultChoice>true</DefaultChoice>
- <ExportTemplateRef>
<TransferDataType>S</TransferDataType>
- <SiteRef>
<Site />
</SiteRef>
<TemplateName />
</ExportTemplateRef>
<ReceiveRequired>true</ReceiveRequired>
</TransferData>
</TransferDataList>
- <ItemShopOrderTypeList>
- <ItemShopOrderType>
- <ShopOrderTypeRef>
- <SiteRef>
<Site />
</SiteRef>
<OrderType />
</ShopOrderTypeRef>
- <RouterRef>
- <SiteRef>
<Site />
</SiteRef>
<Router />
<Revision />
<RouterType>D</RouterType>
</RouterRef>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
</ItemShopOrderType>
</ItemShopOrderTypeList>
- <CustomFieldList>
- <CustomField>
<Attribute languageCode="" />
<Value languageCode="" />
<Description languageCode="" />
</CustomField>
</CustomFieldList>
<CreatedDateTime daylightSavingTimeIndicator="true" timeZoneCode="" />
<ModifiedDateTime daylightSavingTimeIndicator="true" timeZoneCode="" />
<HoldId unitCode="">0.00</HoldId>
<LastReleasedDate daylightSavingTimeIndicator="true" timeZoneCode="" />
- <OriginalStatusRef>
<Status languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</OriginalStatusRef>
</Item>
</ItemByBasicDataResponse_sync>

How can I call a SAPME web service from MII such as PlaceFutureHold?

Dears,
How can I call a SAPME web service from MII such as PlaceFutureHold?
By using MII, I would like to develop some logic to check some values which query from SAPME database, if the value is out of spec, it needs to send a emal to inform user ans also hold the SFC.
Thanks!

With Web service action block you can view all ME available services
in I.E
https://sapme:5000/manufacturing-services/ProductionServiceService?wsdl you could see your FutureHold service
To do that in MII, you need Web Service action block. Have you work with MII transaction before?
(saw your post in MII)

Calling SAP GUI Search help from BSP

Hi,
Please find my requirement below:
I have a Sales Order field with a Search button.
Once Search button is clicked, it should call standard F4 composite search help.
I have tried calling the search help VMVA for sales order, using the Function Module DD_SHLP_CALL_FROM_DYNP.
Once search i clicked this FM is called but in CALL SCREEN statement it goes to page error/dump.
Kindly let me know if there is any other solution for the same.

Hi
As far as I am aware there is no standard way of calling a search help from a bsp. You have to create your own bsp tags to do this.
Check out this link
http://scn.sap.com/people/community.user/blog/2006/12/20/bsp-value-help-input-field-and-select-options-ranges
Darren

Calling SAP ME web services with out reference names

Hello,
When calling SAP ME web services from non SAP clients, is there a way the users can by pass the reference names? Just pass SFC details instead of SFCREF.
example:- Data collection web service expects SFCRef:- SFCBO:<SITE>,<SFC> rather than that, what we are expecting is just pass SFC name and get response from ME.
-Adarsha.K.S

Hi Adarsha,
ME always accepts references only.you can do this in two ways,
1. Form a string with respective business object + site + object and pass.(ex: SFCBO:<SITE>,<SFC>) and then pass as reference.
2. through SOAP UI request XML. ex:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:me="http://sap.com/xi/ME" xmlns:gdt="http://sap.com/xi/SAPGlobal/GDT">
   <soapenv:Header/>
   <soapenv:Body>
     <ParametricRequest_sync xmlns="http://sap.com/xi/ME">
<ParametricRequest>
<SiteRef>
<Site>SITE1</Site>
</SiteRef>
<me:SfcRef>
<me:Sfc>SFC1</me:Sfc>
</me:SfcRef>
   <DcGroupRef>
<DcGroup>ABC</DcGroup>
<Revision>A</Revision>
</DcGroupRef>
<ParametricMeasure>
<MeasureGroup>ABC</MeasureGroup>
<MeasureName>PARAM1</MeasureName>
<Actual>1</Actual>
    </ParametricMeasure>
<ResourceRef>
<Resource>RESOURCE1</Resource>
</ResourceRef>
<me:OperationRef>
                <me:Operation>OPERATION1</me:Operation>
                <me:Revision>A</me:Revision>
        </me:OperationRef>
</ParametricRequest>
</ParametricRequest_sync>
   </soapenv:Body>
</soapenv:Envelope>
hope this helps.

Calling SAP Webservice from JAVA ME bad response time

Hello together,
I'm calling a SAP RFC as a Webservice from JAVA ME (Netbeans 6.8). The stub classes I've generated with the Sun Wireless Toolkit. The RFC function stores entries in a SAP database table. The call of the websevice with transmitting the data and the database update in SAP works fine, but I got the response message from SAP with a delay of 40 seconds.
Does anyone know why there is so a long delay in the response and how to fix it?

hi,
is this reproducible or was it just the first call to that service?
it usually occurs that once you call a webservice for the first time, some of the programs (be it your application programs or the even the SOAP runtime itself) required have not been compiled until that and so they are compiled during the webservice call.
This leads to slow response times even time-outs. The effect vanishes once all sources are compiled (i.e. depending on the complexity of your calls after one to a few calls to that service).
So, if the slow response times persist, you should turn on debugging in SICF and see where time is spent...
my 2 cents,
anton

How to call SAP Webservice in standalone java program

Hi,
In our Java application, we want to use the SAP Webservices. I dont know much about authentication mechanism used by SAP. Can any one please help me with any sample code how to Call SAP webservice in Standalone Jave Program. I searched alot on the web regarding this, but helpless. Please help me.
Thanks,
Mohan

Hi Mohan,
You need an account for the ES Workplace. I'm afraid this is not free, e.g. check [SAP NetWeaver, Composition Subscription|https://www.sdn.sap.com/irj/sdn/subscriptions/composition].
But I thought you wanted to play with a WSDL [you already had at hand|Sample code to access BAPI Web services from JAVA required;?

Error while calling PI webservice from EJB

Hi Experts,
We are getting exception while calling PI webservice from EJB which is deployed in CE 7.2. Earlier we used to call the same webservice but from different PI system at that it worked fine. Now we have changed the consumer proxies required in CE and tried to call from CE and it is throwing error. We have checked usernames and passwords that we are using to call the service and that is working fine. PI team tested from their side and li is also fine. We have also restarted the CE system but invain. Can somebody help on this. The below is the trace that we got.
Location: com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding
Text: Connection IO Exception. Check nested exception for details. (Connection reset).
[EXCEPTION]
com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Connection reset).
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.outputSOAPMessage(SOAPTransportBinding.java:419)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1364)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:990)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:944)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.processTransportBindingCall(WSInvocationHandler.java:168)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invokeSEISyncMethod(WSInvocationHandler.java:121)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invokeSEIMethod(WSInvocationHandler.java:84)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invoke(WSInvocationHandler.java:65)
at $Proxy780.mioaRDMDataDistribution(Unknown Source)
at com.MDMEventListener.callToPIWS(MDMEventListener.java:100)
at com.MDMEventListener.ListenerMethod(MDMEventListener.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_WS.invoke(Interceptors_WS.java:31)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:39)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:23)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138)
at com.sap.engine.services.ejb3.webservice.impl.DefaultImplementationContainer.invokeMethod(DefaultImplementationContainer.java:203)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process0(RuntimeProcessingEnvironment.java:730)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:682)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:324)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:199)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:65)
at com.sap.engine.services.webservices.servlet.SoapServlet.doPost(SoapServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:404)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:204)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:440)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:429)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:82)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:268)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:54)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:447)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:264)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:950)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:414)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:319)
at com.sap.engine.services.webservices.espbase.client.bindings.ClientHTTPTransport.getResponseCode(ClientHTTPTransport.java:209)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.outputSOAPMessage(SOAPTransportBinding.java:385)
... 78 more
Regards,
Pradeep

Hi Pradeep,
this looks like if the server is not reachable. Have you checked if both server are able to communicate? Maybe firewall rules block the request.
Regards,
Tobias

Error getting while calling a webService from XI

Hi
We are getting the follwoing error while calling a webservice from XI. We Could call the same webservice from XML spy. Have checked the SOAP adapter it was running fine and the communication channel parameters too.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code area="MESSAGE">GENERAL</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.MessagingException: SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault</SAP:AdditionalText><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack/><SAP:Retry>M</SAP:Retry></SAP:Error>
Please try to help.
Thanks
Ramesh

Hi
Thanks a lot for your kind support.
Hi Moorthy
We have created one Asyn MI and wrapped the external definition into that, Haven't done any mapping for responce. Please find the trace below.
Hi Bhavesh
It was great helpful link but the payload days is not visible for this message it was containing details about sending. For some other message i could see payload.
I Could see one differnce in the XML Spy and "XI payload before entering SOAP Adapter"
The following line doesnt appear in the XI payload.
<m:StatusUpdate xmlns:m="http://localhost/StatusUpdate" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
</m:StatusUpdate>
Is this line would be embeded in the SOAP Adapter??? Please find the trace below. Please help me if you have any additional info.
The message was successfully received by the messaging system. Profile: XI URL: Using connection AFW. Trying to put the message into the receive queue.
Message successfully put into the queue.
The message was successfully retrieved from the receive queue.
The message status set to DLNG.
Delivering to channel: CC_SOAP_Rcvr_D_Pick_ZALEAUD
SOAP: request message entering the adapter
SOAP: completed the processing
SOAP: response message received 4cb3fab0-7fc5-11db-8c5a-000f203c93e0
SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
SOAP: sending a delivery error ack ...
SOAP: sent a delivery error ack
Exception caught by adapter framework: SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
Delivery of the message to the application using connection AFW failed, due to: SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault.
The asynchronous message was successfully scheduled to be delivered at Wed Nov 29 16:23:51 GMT 2006.
The message status set to WAIT.
Retrying to deliver message to the application. Retry: 1
Kind Regards
Ramesh
Message was edited by:
Ramesh Reddy Pothireddy

Calling a webservice from webdynpro ABAP.

Hi,
Anybody have doc/material with screenshots on calling a webservice from webdynpro ABAP (In WAS 7.0 version using service calls ) with clear steps ?
Thanks in advance. Ponts will not be a constraint for right answers
Praveen
Edited by: Praveen kumar Kadi on Feb 23, 2009 11:19 AM

Hi Praveen,
1st Step : configure Logical Port
http://help.sap.com/saphelp_nw70/helpdata/EN/16/285d32996b25428dc2eedf2b0eadd8/frameset.htm
2nd Step : Generate Proxy Object
http://help.sap.com/saphelp_nw70/helpdata/EN/16/285d32996b25428dc2eedf2b0eadd8/frameset.htm
3rd Step : Instantiating the proxy object & calling the methods exposed by webservice
data: sys_exception type ref to cx_ai_system_fault,
      sys_exception2 type ref to cx_ai_application_fault,
      client_proxy type ref to zco_myesa, "MY PROXY CLASS
      lv_ret_code type int4,
      lv_input type zsend_email_input,
      lv_response type zsend_email_response.
data: lv_from type string,
      lv_from_address type string,
      lv_to type string,
      lv_to_address type string,
      lv_subject type string,
      lv_msg type string.
lv_input-from = 'MYSAPTEST'.
lv_input-from_address = '<someAddress>'.
lv_input-to = 'Prashant'.
lv_input-to_address = '<someAddress>'.
lv_input-subject = ' TEST'.
lv_input-msg_body = ' Hi this is wonderfull to see it work'.
try.
create object client_proxy
exporting
logical_port_name = 'BASIC'. " Basic is a TYPE G RFC Destination
call method client_proxy->send_email
   exporting
     input = lv_input
   importing
     output = lv_response    .
catch cx_ai_system_fault into sys_exception .
    data lv_err type string.
     lv_err = sys_exception->if_message~get_text( ).
     write: / lv_err.
catch cx_ai_application_fault into sys_exception2 .
     lv_err = sys_exception->if_message~get_text( ).
     write: / lv_err.
endtry.
if lv_response is initial.
   write: /'Not Executed'.
else.
   write: /'Did Execute'.
endif.
Greetings
Prashant

#2170 error calling a webservice from Xcelsius having crossdomain.xml

Hello together,
we are facing a #2170 error indicating we don't have a proper policy file in place when executing a published Xcelsius flash in SAP BI application portal.
We created a WebService that is running an SAP BI System 7.01. The WebService is function module based and was generated following the wizzard. Afterwards we created a Xcelsius app that consumes data from this WebService (via data connection). The resulting flash from Xcelsius was pulished to SAP BI System (portal).
Since there are many entries in the SDN and the internet in general we finally also created an crossdomain.xml file on the BI system which can be accessed and is visible by using "https://<server>/crossdomain.xml".
Now the confusion begins: We exported the flash from Xcelsius to local desktop and executed the corresponding HTML-file. It's working and I can receive/see WebService data (after adjusting flash-security-settings). If we upload both exported files (html and swf) to the BI system (as MIME objects) and execute the html again we are also receiving WebServervice data. So far so good. But if we execute the link from the SAP BI Portal (Xcelsius menu > SAP > Start) we still get the error #2170 indicating we don't have a proper domain policy file in place. But for my understanding we do have. So currently I would assume the error message is somehow misleading.
During all the activities I found out that this error is also raised if the user has insufficient authorization. My user has SAP_ALL authorization for testing purpose.
In general I would say we are not that wrong with our Xcelsius/WebService if we are not coming from BI portal. So my questions are:
1.) Are there any authorization on portal side that might not fit and lead to this error? If insufficient authorizations produces such an error ...
2.) Did we miss any other stuff during our try/fail-operations?
Many thanks in advance for your hints.
Steffen

Hi Rajat,
This is how the default trace looks
FATAL: Application Servlet failed to notify devices.
Caught java.rmi.RemoteException: Service call exception; nested exception is:
     com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://<<server>>:50000/ManagementService/ManagementService?style=document"
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1289)
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1298)
     at com.om.ApplicationServlet$NotifyDevices.run(ApplicationServlet.java:86)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://<<server>>:50000/ManagementService/ManagementService?style=document"
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:980)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1430)
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1282)
     ... 2 more
java.lang.NoSuchMethodError
at java.lang.Thread.destroy(Thread.java:779)
     at com.omApplicationServlet$NotifyDevices.run(ApplicationServlet.java:92)
Rgds
Shashank

Calling a WebService from servlet

Hello,
When i am trying to call my WS(generated from ABAP ) from a servlet, i have this error :
[EXCEPTION]
javax.xml.ws.WebServiceException: Invalid Response code (404). Server [http://adressWebService] returned message [Not Found]. Http proxy info: none
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.processTransportBindingCall(WSInvocationHandler.java:174)
Does anyone had an idea about this error ?
Thanks in advance for your help,
Regards,
Khalida

I have a great idea to look internet
http://en.wikipedia.org/wiki/HTTP_404

Error calling a webservice from one server process of the cluster

Hi ,
I have a servlet which on startup makes a call to a webservice. I deploy this webapp on the cluster.
The cluster has two instances each instance having one server process.
So when the server restarts one server process on one instance calls the web service the other process on other instance fails with a 503 response code.
When I tried to reproduce the same problem using two server processes on the same instance both processes are able to call the webservice properly.
I am slightly confused as to how different the second scenario is from first one as both are individual server process and may or may not run on same instance.
Can anyone tell me the real cause.
Rgds
Shashank

Hi Rajat,
This is how the default trace looks
FATAL: Application Servlet failed to notify devices.
Caught java.rmi.RemoteException: Service call exception; nested exception is:
     com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://<<server>>:50000/ManagementService/ManagementService?style=document"
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1289)
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1298)
     at com.om.ApplicationServlet$NotifyDevices.run(ApplicationServlet.java:86)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://<<server>>:50000/ManagementService/ManagementService?style=document"
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:980)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1430)
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1282)
     ... 2 more
java.lang.NoSuchMethodError
at java.lang.Thread.destroy(Thread.java:779)
     at com.omApplicationServlet$NotifyDevices.run(ApplicationServlet.java:92)
Rgds
Shashank

Best way to recieve Datas from MII in SAP

Hi everybody,
We are discussing which way is the best to get data to SAP when SAP is the initiator.
We tesed RFC but it looks like that if I call a transaction in MII as a rfc I can only send data and it is not possible to recieve data in this way. Can somebody confirm that?
To send data to MII we usually use IDOCs when SAP is the initiator.
To send data to SAP we usually use rfc when MII is the initiator.
To send data to MIIwe usually use rfc when MII is the initiator
But what can we use if we want to send data to SAP and SAP is the initiator?
Thanks for your help.
Regards,
Matthias

Hi,
thanks for your quick answer.
Is it possible to use an rfc in ABAP-Code and recieve data?
I think this is not possible.
Our Business-case:
A user starts an SAP-Programm (e.g. custom transaction) where he has some informations to a machine.
In this program we also want to see data from MII.
it should be something like this in ABAP-code:
CALL FUNCTION mii_transaction DESTINATION mii_dest
parameter_list.
But I read in a help-file that it is only possible to send information not to recieve. Is this correct?
Or is it also possible to recieve data from mii like this (in parameter_list)?
Regards,
Matthias

Problem to Import WSDL from MII in SAP Netweaver

Hi everyone,
i'm tryng import a wsdl from MII (WebService Transaction) but when i create the adaptative web service model in webdynpro project and insert the WSDL URL, show this error message:
"The WSDL contains neither services, bindings or porttypes and can therefore not be processed".
I have read some tutorials for connect webdynpro and mii and i think that my procedure is correct.
With others webservices for exmple for sap EC i don´t have this problem.
Someones knows what´s can be the problem?
Thank You

Hi,
WSDL is a XML document contains type, message, operation, binding, port, service tags. so check your WSDL document contains all these tags with appropriate information.
We can generate WSDL XML document from MII by executing a transaction.
http://<server name>:<port>/XMII/WSDLGEN/<transaction name>
To test SOAP protocol : http://<server name>:<port>/XMII/SOAPRunner/<transaction name>
Kindly ensure all the configuration settings.
Thanks
Rajesh Sivaprakasam.

CALL SAP ME's WebService from MII

Similar Messages

Maybe you are looking for