Call screen 800.

Hi Experts,
I have a button (Detail) on 1000 screen and i need, when i press on Detail button the subscreen 800 should be display.
My coding is like that.....
case sy-ucomm.
WHEN  'Details'.
call screen 800.
endcase.
But its not working properly. It is giving Dump error.
Plz help me.
Thanks in advance.
Regards,
Swapnika

Hi Swapnika,
Selection screens as subscreens on screens.
REPORT demo_sel_screen_as_subscreen.
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-010.
PARAMETERS: p1(10) TYPE c,
            p2(10) TYPE c,
            p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1100.
SELECTION-SCREEN BEGIN OF SCREEN 1200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-020.
PARAMETERS: q1(10) TYPE c OBLIGATORY,
            q2(10) TYPE c OBLIGATORY,
            q3(10) TYPE c OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 1200.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: number(4) TYPE n VALUE '1100'.
START-OF-SELECTION.
  CALL SCREEN 100.
MODULE status_0100 OUTPUT.
  SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
  LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100 INPUT.
  save_ok = ok_code.
  CLEAR ok_code.
  CASE save_ok.
    WHEN 'BUTTON1'.
      number = 1100.
    WHEN 'BUTTON2'.
      number = 1200.
  ENDCASE.
ENDMODULE.
AT SELECTION-SCREEN.
  MESSAGE s888(sabapdocu) WITH text-030 sy-dynnr.
This defines two selection screens u2013 1100 and 1200 u2013 as subscreens.
The screen contains a subscreen area AREA and two pushbuttons with the function codes BUTTON1 and BUTTON2.
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
  MODULE status_0100.
  CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
  MODULE cancel AT EXIT-COMMAND.
  CALL SUBSCREEN area.
  MODULE user_command_0100.
When you run the program, a screen appears on which selection screen 1100 is displayed as a subscreen. You can display either selection screen in the subscreen area, using the pushbuttons to switch between them. Before you switch from selection screen 1200 to 1100, you must fill out the obligatory fields. The data you enter is available to the program in the parameters in the PAI event.
Hope it helps you
Regrds
Mansi

Similar Messages

  • Nokia 701 call screen lock feature?

    Hi nokia community,
    was wondering if there is call screen lock feature in nokia belle? Because i couldn't find it any where in my nokia 701, even there is no option to edit the normal lock screen or button?
    Why there are bugs and such small and important features are missing in nokia's belle OS?
    Please help me feel like i'm using a smartphone.
    Any help would be highly appreciated.
    geekObelle
    Solved!
    Go to Solution.

    Hmm..I am not sure..call nokia care in your country.
    I am not having anything to complain about regarding how my 701 behaves with incoming calls or things about "lock screen"..sorry.
    PS Try out "Nokia sleeping screen" for nice "lock screen" features when phone is asleep..Nokia store..
    Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

  • How to calling 1 800 numbers and then input confer...

    I know that I can call 1-800 numbers in the USA but I need to be on a conference call via  1-800 number on Monday.  Once the 1 800 number is answered, a voice asks me to enter the code to join the conference call.  how do I do that as there is no keyboard to enter the numbers?  Do I just enter the numbers after the original 1 800 number call?  Please advise.  Thanks,
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

    When in a call you have the call controllers at the bottom of the screen, press the dotted one (show dialpad), and enter the code.

  • What is the diffrence of 'call screen 100' and 'leave to screen 100'

    Thank u

    hi,
    You can insert a screen sequence. This adds another layer to a stack.
    You insert a screen sequence using the CALL SCREEN <nnnn> statement.
    Note: Layers created in this way must be removed afterwards. You can do this by setting the next screen
    statically or dynamically to the initial value (0) an the end of the inserted screen sequence.
    To interrupt processing of the current screen and branch to a new screen (or sequence of screens), use
    the CALL SCREEN <nnnn> statement. The screen <nnnn> must belong to the same program.
    In the program, the system constructs a stack. The stack has to be destroyed before the end of the
    program.
    To return to the statement following the CALL SCREEN statement, you can use either SET SCREEN 0.
    LEAVE SCREEN. or LEAVE TO SCREEN 0. The screen that called the other screen is then processed
    further.
    If you use the above statements outside a call chain, the program terminates, and control returns to the
    point from which it was called. You can also terminate a program using the ABAP statement LEAVE
    PROGRAM.
    To interrupt processing of the current screen and branch to a new screen (or sequence of screens), use
    the CALL SCREEN <nnnn> statement. The screen <nnnn> must belong to the same program.
    In the program, the system constructs a stack. The stack has to be destroyed before the end of the program.
    To return to the statement following the CALL SCREEN statement, you can use either SET SCREEN 0.
    LEAVE SCREEN. or LEAVE TO SCREEN 0. The screen that called the other screen is then processed
    further.
    To specify the next screen and leave the current screen in a single step, use the LEAVE TO SCREEN <nnnn> statement.
    Hope this helps, DO reward.
    Edited by: Runal Singh on Apr 3, 2008 3:11 PM

  • ALV not getting refreshed when call screen is executed second time

    I have 2 screens 9001 and 9002. In 9001 , I am displaying the fields of a database table in a Table Control. The user has to select some of those fields and click on a button 'Generate ALV'. After clicking , the control navigates to 9002 where I am displaying ALV with data in the selected fields(the other fields remain empty). (using custom container)
    Now there is BACK button in 9002 where i have written LEAVE TO SCREEN  9001. After this if the user again make changes in column selection and click on 'Generate ALV' , then still the old alv data is displayed. (Mind you the structure of alv is same , only the selected fields should show data).
    I am using REFRESH_ALV_DISPLAY also and when i tested this function independently , its working fine (although for interactive alv in the same screen).
    I am making use of <fs> for dynamic internal table and i checked it using breakpoints , during the 2nd time , it contains the correctly updated data so i think the problem lies with alv
    Kindly check this code
    MODULE STATUS_9002 OUTPUT.
      SET PF-STATUS 'ZALV'.
    *  SET TITLEBAR 'xxx'.
      CREATE OBJECT C_CONT
        EXPORTING
          CONTAINER_NAME               = 'CUST_CONT'
      IF SY-SUBRC <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    IF OBJ_ALV IS INITIAL.
      CREATE OBJECT OBJ_ALV
        EXPORTING
          I_PARENT           = C_CONT
      CALL METHOD OBJ_ALV->SET_TABLE_FOR_FIRST_DISPLAY
         EXPORTING
           I_STRUCTURE_NAME              = INP_TABLE
         CHANGING
          IT_OUTTAB                      = <itab>
    ELSE.
       CALL METHOD OBJ_ALV->REFRESH_TABLE_DISPLAY
      ENDIF.
    ENDMODULE.                 " STATUS_9002  OUTPUT
    Edited by: amber22 on Sep 16, 2011 6:45 PM

    Amber,
    Something like:
    *&      Module  STATUS_9001  OUTPUT
    MODULE status_9001 OUTPUT.
      SET PF-STATUS 'ST9001'.
    ENDMODULE.                 " STATUS_9001  OUTPUT
    *&      Module  USER_COMMAND_9001  INPUT
    MODULE user_command_9001 INPUT.
      CASE sy-ucomm.
        WHEN 'GEN'.
          SELECT * FROM spfli INTO TABLE gt_outtab.
          CALL SCREEN 9002.
        WHEN 'BACK'.
          LEAVE.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_9001  INPUT
    *&      Module  STATUS_9002  OUTPUT
    MODULE status_9002 OUTPUT.
      SET PF-STATUS 'ST9002'.
      IF obj_alv IS INITIAL.
        CREATE OBJECT c_cont
          EXPORTING
            container_name = 'CUST_CONT'.
        CREATE OBJECT obj_alv
          EXPORTING
            i_parent = c_cont.
        CALL METHOD obj_alv->set_table_for_first_display
          EXPORTING
            i_structure_name = 'SPFLI'
          CHANGING
            it_outtab        = gt_outtab.
      ELSE.
        CALL METHOD obj_alv->refresh_table_display.
      ENDIF.
    ENDMODULE.                 " STATUS_9002  OUTPUT
    *&      Module  USER_COMMAND_9002  INPUT
    MODULE user_command_9002 INPUT.
      CASE sy-ucomm.
        WHEN 'BACK'.
          CALL METHOD: obj_alv->free, c_cont->free.
          CLEAR: obj_alv, c_cont.
          CALL METHOD cl_gui_cfw=>flush.
          LEAVE TO SCREEN 9001.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_9002  INPUT
    Altough it's not a really nice solution... Why using 2 screens for example? you could use two containers instead...
    Also I would recommand playing with the new salv class for your grids.
    Anyway don't hesitate to give feed-back.
    Kr,
    m.

  • In CL_GUI_SPLITTER_CONTAINER  ALV list  is not show in called screen

    Hello experts,
    i come across a problem while using the class:CL_GUI_SPLITTER_CONTAINER ,
    my codes is as follows:
    data:declarations is as follows:
                 data:gr_spliter     TYPE REF TO cl_gui_splitter_container,
                         gr_container1  TYPE REF TO cl_gui_container,
                         gr_container2  TYPE REF TO cl_gui_container,
                         gr_grid1       TYPE REF TO cl_gui_alv_grid,
                         gr_grid2       TYPE REF TO cl_gui_alv_grid,
    step 0  Fit  table contents:gt_out1 and gt_out2
    step 1:   CREATE OBJECT gr_spliter
                   EXPORTING
                   parent            = cl_gui_container=>screen0
                   ows               = 1
                   columns         = 2
    step 2:  CALL METHOD gr_spliter->get_container
                 EXPORTING
                 row       = 1
                column    = 1
                RECEIVING
                container = gr_container1.
                CALL METHOD gr_spliter->get_container
                 EXPORTING
                 row       = 1
                column    = 2
                RECEIVING
                container = gr_container2.
    step 3 :call screen 100 to show ALV.
    in the screen's PBO ,i show ALV using CL_GUI_ALV_GRID,the codes is:
       CREATE OBJECT gr_grid1
        EXPORTING
          i_parent          = gr_container1
       CREATE OBJECT gr_grid2
        EXPORTING
          i_parent          = gr_container2
      CALL METHOD gr_grid1->set_table_for_first_display
        EXPORTING
          i_structure_name              =  Structure of table Gt_OUT1
        CHANGING
          it_outtab                     = gt_out1
    CALL METHOD gr_grid2>set_table_for_first_display
        EXPORTING
          i_structure_name              =  Structure of table Gt_OUT2
        CHANGING
          it_outtab                     = gt_out2
    But after activing the program ,there is no ALV show in screen 100,I debug the program and find that
    all the above object have been created corredtly.
    if i create a custom contol named 'CONTAINER',and at Step 1 change the parent's value to 'CONTAINER',
    then i could see the ALV whick i hope in screen 100.
    If i create a custom control in screen 100, the size of the alv will be different across different computer,
    is it possible to use CL_GUI_CONTAINER=>screen0 as cl_gui_splitter_container's attribute parent  value???
    and i find that there are 10 attributes named screen0 to screen9 in class CL_GUI_CONTAINER,will you tell me the usage of
    these attributes?
    now i only konw that ,you could set a containers parent value to be CL_GUI_CONTAINER=>screen0,which you do't have to create
    a custom control in your screen ,and the alv will be shown in full screen.and what the other attributes use (screen1,screen2,screen3,screen4 and so on)
    now i am confused with the problem,i am sure any words from you will give me help to this question!
    Hope to receive your advice!
    Best regards!
    yours Carl
    Edited by: lakeandmoon on Aug 27, 2010 11:24 AM

    Dear Carl,
    I mean go to screen painter and place there CUSTOM_AREA (the icon with C letter). In program's PBO create CUSTOM_CONTAINER
    module pbo output.
    if custom_container is initial.
    CREATE OBJECT custom_container
       EXPORTING container_name = 'CUSTOM_AREA'.\
    endif.
    endmodule.
    Then you work only with CUSTOM_CONTAINER (i.e. as parent to SPLITTER_CONTAINER). Using subscreens here doens't really add the value, so you don't need any.
    But how could i stretch the screen and this area to full screen?is it just gragging the screen to full screen and drag the subscreen or the custom control to full screen in screen painter?
    Yes, this is what I mean
    Regards
    Marcin

  • Statement "CALL SCREEN" is not allowed in this form.

    Hi,
    Could anyone identify the short dump.
    Statement "CALL SCREEN" is not allowed in this form.
    There is probably an error in the program
    "SAPLKKBL".
    This program is triggered in the update task. There, the
    following ABAP/4 statements are not allowed:
    -  CALL SCREEN
    -  CALL DIALOG
    -  CALL TRANSACTION
    -  SUBMIT
    Error in
    "POSTING_ILLEGAL_STATEMENT" " "
    "SAPLKKBL" or "LKKBLU01"
    "K_KKB_LIST_DISPLAY"
    Regards
    Manohar S

    Short text
    Statement "CALL SCREEN" is not allowed in this form.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLKKBL" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    There is probably an error in the program
    "SAPLKKBL".
    This program is triggered in the update task. There, the
    following ABAP/4 statements are not allowed:
    -  CALL SCREEN
    -  CALL DIALOG
    -  CALL TRANSACTION
    |    -  SUBMIT       
    Information on where terminated
    Termination occurred in the ABAP program "SAPLKKBL" - in "K_KKB_LIST_DISPLAY".
    The main program was "RSM13000 ".
    In the source code you have the termination point in line 441
    of the (Include) program "LKKBLU01".
    |    The program "SAPLKKBL" was started in the update system.    
    This is the dump

  • Problem with Call Screen and Leave Screen !

    Hi,
    I am calling Modal screen (Dialog Pop up screen) from my first screen by 'Leave to Screen 'nbr' ' then once user enter the value in the pop up screen then I haveto display value with TABLE in Final screen as 'Normal screen'  here I am  using LEAVE to SCREEN, but after this call - my new final screen is not displaying as noraml screen it also displaying like 'Modal Screen' Like big pop scrren.!!
    When I tried final CALL by using CALL SCREEN instead of LEAVE screen the final screen with  table is dispalying fine as Normal screen but its returning control to pop-up screen which I dont want.
    I like Screen flow as 1>2>3--->1
    Help me to solve this Problem.
    Regards
    James

    Hi,
    Check the below thread,
    Unable to close Modal dialog box
    1) 1st screen--> 2nd screen --> Use CALL SCREEN.(This is Modal Screen)
    2) 2nd Screen-->(ModalScreen so you need come back) use the above thread
    3) Still on 1st screen--> Use CALL SCREEN --> To 3rd Screen
    4) 3rd Screen back to First Screen -> use LEAVE TO SCREEN First_Screen_NO.
    Cheerz
    Ram

  • Problem with call screen

    Hi everybody, I did work a program with Tx SE38, in the program I call a screen.
    START-OF-SELECTION.
      PERFORM completa_lista.
      CALL SCREEN 0100.
    END-OF-SELECTION.
    The program run very well, but. When the program is in screen 0100 and push the button BACK or button EXIT. Don't return to program that called to screen 0100, always return to the program SAPMSSY0 and then push again the button  BACK or EXIT to return the program that called to screen 0100.
    This is my code in the PAI:
    MODULE user_command_0100 INPUT.
      CASE sy-ucomm.
        WHEN 'EXIT' OR 'BACK'.
          LEAVE TO SCREEN 0.
      ENDCASE.
    ENDMODULE.
    I try with SET SCREEN 0. or LEAVE TO SCREEN 0. But always return to the program SAPMSSY0
    Is there a way to skip the program SAPMSSY0?

    Hi ,
    LEAVE TO SCREEN 0 will work in your case.
    it comes back to the point from where it triggered screen 0100.
    If you want to leave the program and come back to the easy access screen then you have to use LEAVE PROGRAM.
    hope this helps!!
    Regards,
    Soumya Ranjan
    Edited by: Soumya Ranjan on Dec 15, 2010 5:59 AM

  • How to go back to calling screen???

    Hi experts,
    I had modified the Exit MV45AFZZ to display pop up message when we save a sales order.
    Now user after giving all the input in VA01 will go for SAVE button and after which pop up will occur.
    Now my problem is after displaying message it should come to same screen of sales order and with all the input data as user had mentioned.
    Please help as its very urgent for me.
    All the answers will be appreciated.
    Thanks.
    Saurabh.

    hi,
    You insert a screen sequence using the CALL SCREEN <nnnn> statement.
    Note: Layers created in this way must be removed afterwards. You can do this by setting the next screen
    statically or dynamically to the initial value (0) an the end of the inserted screen sequence.
    To interrupt processing of the current screen and branch to a new screen (or sequence of screens), use
    the CALL SCREEN <nnnn> statement. The screen <nnnn> must belong to the same program.
    In the program, the system constructs a stack. The stack has to be destroyed before the end of the
    program.
    To return to the statement following the CALL SCREEN statement, you can use either SET SCREEN 0.
    LEAVE SCREEN. or LEAVE TO SCREEN 0. The screen that called the other screen is then processed
    further.
    If you use the above statements outside a call chain, the program terminates, and control returns to the
    point from which it was called. You can also terminate a program using the ABAP statement LEAVE
    PROGRAM.
    Hope this helps, Do reward.

  • Caller screen Buttons problem Z10STL100-1

    I have Z10STL100-1 after official update Z10STL100-1/10.3.1.1565 having caller screen Buttons problem these are little above not like it's on 10.2 very below position. I security wipe and restart many times still same position of buttons? See pic attached

    Hello,
    Did you check if there are no objects on that index slide that have a fading transition? You should set the transition for every object to 'No transition'. The transition can be found in the Properties dialog, tab Options.
    Lilybiri

  • JFileChooser.showSaveDialog() to be displayed along with calling screen

    hi,
    i have a frame ,in that i placed many components,one of the component is Jbutton,when the user click on this button ,it calls JFileChooser.showSaveDialog() to save a file in local system.
    After opening "file save window" , without clicking file save button ,if i open some other application(like WSAD,textpad) i am not able to see "file save window" until unless i search for that window by using "alt+tab".
    here what i am trying to say is "file save window " always needs to be on top of its calling screen.
    i even used JFileChooser .showSaveDialog(Component parent) ,but still that is not happening,if anyone come across this problem ,please help me.
    thanks in advance..

    hi PhHein,
    perfect answer.
    Thanks for your reply,your answer made me think on my code .There was small issue in my code and its been resolved now.

  • Call Screen problem in a report

    Hi All,
    I have a report in which I am calling an ALV grid screen 1000. I select some line items and click on execute. On execution in the PAI I have called a function module which has a call screen statement inside it. This should call the screen 100 with tabstrip(This screen is not related to this report. This belongs to some other function group). But when I execute the report instead of calling the screen 100 again the screen 1000 is only being displayed. I have found that the PBO of screen 100 and all the subscreens in it are being called but after that this 100 screen not displayed as mentioned already. Please someone let me know if I am missing something somewhere.
    Thank you,
    Sri.

    Hi Madhu,
    I am calling the screen from PAI of the ALV grid screen. I have debuged and checked. The PBO of the screen and the corresponding subscreens is being called but after that instead of the wanted screen this ALV grid screen is being called. And when I press back button then again PAI of the actual screen is being called.
    When the same FM is called from other classic reports without using ALV grid it is working fine.
    Thanks,
    Sri.

  • Call screen of a function group

    Hi experts,
    How can I call a screen of a function group from another function and then return to the place of call?
    I have my own function and I need to call the screen of a certain function group.

    Hi.
    If there is function module A, which calls screen N assigned to function group B,
    so to call screen N,
    you should call function module A within your function module.

  • Reg. call screen stmt.......Have ur points.

    Hi all,
    I have 2 screens 1000 & 2000 in module pool. In PAI of 1000, i am using CAll screen 2000. 
    As we know in case of <b>call screen</b> we can come back to the previous screen.
    Now when i write leave screen in PAI of 2000. Control is not going to 1000 screen.
    Pleas assist me.
    <b>Have ur points.</b>
    Regards,

    Hello Pradeep..
    There is also one more point..
    You can see in the attributes tab of any screen created in the "Other Attributes"
    the following details
    Next Screen              
    Cursor position
    Screen group
    Lines/Columns   Occupied 26    141
                    Mainten. 28    141
    Context menu FORM ON CTMENU
    The next screen always refer the next screen being/to be called..so in screen 2000 pls try putting the next screen as '1000'
    Reward if helpful and pls revert if the solution is feasible for the situation
    Regards
    Byju

Maybe you are looking for

  • AP Payment document update

    Hi Consultants, We have requirement to update AP payments checks voucher field in payment overview screen from Cash Management. we will load the bank back file (which have account number) to CM for reconcilication after this process we need to update

  • How do I get rid of a previous apple i.d. so that I can have the same one on my I Phone and my I Pod Touch

    Previously I had an Apple ID with my I Pod Touch using an old e-mail address with @gmail.com.  I just recently got the I Phone 5 and set it up using my new apple ID with an @hotmail.com.  How can I change the I Pod Touch to the new e-mail address so

  • HOW TO INCLUDE a LITTLE LOGO of your site in the browser bar

    All the website are having their logo appearing in the browser bar at the left hand side. I would like to incorporate a little logo to my website ( www.buscapartamentosbogota.com).Does anyone know how?

  • IWeb HTML Snippet--Facebook Badge

    I've had a Facebook HTML Snippet on my iWeb home page for over a year and suddenly this week, it quit working. I just see the outline box with a question mark in the middle now. I tried deleting the snippet an republishing it several times. I've repa

  • Cisco CSM - Has anyone deployed it in their environment for IDS/IPS devices

    We are an MSP and are evaluating Cisco CSM to manage about 50 IDS/IPS devices. Each of these devices has their own customer signature policy. Does anyone use it in their production environments? Do you find it useful? Regarding policy management for