Call screen in SAP Query selection screen (SQ01)

Hi experts , in sq01 selection screen my requirement is: for one field  when the user call F4 the small screen should be appear and when they fill
those 3 fields I should concatenate them and send it as a single field to query for process , the important thing is those 3 fields should be in '
one line beside each other , is there a way like call screen or ... in  sq01 for this issue ??
the screen that should be appear is something like this

Hi,
I dont think that ALV double click can be handles via SAP query. One possibility is that you can modify the report program that SAP generates for the query. Change the program to handle the double click evet on the ALV grid and call transaction ME23n using the PO number on the line selected.
Regards
Ajith

Similar Messages

  • Check box in SAP Query selection screen

    I want to keep 2 check box in SAP Query selection screen.
    could you please tell me any one.
    regards,
    kumar

    Hi Vijay,
    If these check boxes are the fields in the table you are using then you can do it in SQ01, otherwise you may required to make the changes in the standard code generated for that query.
    You can find the name of the generated program of the query when you execute the query.
    Reward points if useful.
    Regards,
    Atish

  • SAP Query selection screen issues after ECC upgrade

    Hi all
    We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
    All the fields required are available.
    However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
    Can anyone help identify the issue so that the issue can be resolved?
    Thanks
    Vinodh S

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • F4 search-help in infoset query selection-screen fields

    Hi all,
    I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
    How can I do this?
    I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
    Can you help me? I never done this before, so I really don't have a guess.
    Thanks in advance.
    Beste regards,
    Sónia Gonçalves

    Hi all,
    I have found thread  that helped me a lot in this issue.
    I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
    Isn't it possible to include it in the "Report-specific selctions"?
    Thanks in advance.
    Best regards,
    Sónia Gonçalves

  • Query Selection screen field validatoin

    I am testing a query using the RSRT2 transaction and have a query selection screen whose fields i want to create custom validations for. ( which should trigger when check or execute is pressed )
    How can this be achieved ?
    I tried looking for exits but did not find a relevant one.
    Thanks in advance.

    Hello,
    You need to write a routine in SMOD for selection screen validations.
    It will come in i_step = 3. please refer foll code as example:
    The code example is to check whether date is less than or equal to current date. If user enters future date it pop ups saying enter date less than or equal to current date.
    DATA:  LI_VAR like rrrangeexit,
           wa_t_var_range like LI_VAR,
           count type i value 0.
    IF i_s_rkb1d-infocube EQ 'CUBE1' or
       i_s_rkb1d-infocube EQ 'CUBE2'.
    Check whether only one of date variable is entered in variable screen.
    IF I_STEP = 3.
        Read table i_t_var_range into wa_t_var_range with key vnam = 'VARDATE'.
          if wa_t_var_range-low > sy-datum.
            CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
              EXPORTING
                I_CLASS  = 'RSBBS'
                I_TYPE   = 'E'
                I_NUMBER = '000'
                I_MSGV1  = 'Enter date less than or equal to current date'.
            raise again.
          endif.
    ENDIF.
    ENDIF.
    Regards,
    Shashank

  • Is it possible to rearrange the order of SAP STD Selection Screen?

    Hi.
    Is it possible to rearrange the order of SAP STD Selection Screen?
    Example:
    IW69 has Location data selection at bottom of screen. 
    Is it possible to move that to top of the selection screen?
    We are on ECC6.0.
    Thank you,
    Brett.

    Hello Brett
    You may try to use GuiXT:
    [Adjusting Transactions Using GuiXT|http://help.sap.com/saphelp_sm32/helpdata/en/89/91b9db194f11d5b3a30050dae02d7c/content.htm]
    Regards
      Uwe

  • BEx query selection screen takes long time to popup

    Hi,
    I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of seconds. The first time I run the query everything its fine but then for the second time the problem comes back again.
    The selection screen takes +/- 40 mins to comes up in RSRT and in the portal it times out.
    I have run the statistics of the query and according to the statistics report the query takes a  lot of time for the following component :
    OLAP: Query Gen.     2681,312682
    I have removed the query from the cache monitor and after that regenerate the report. But these steps didnu2019t solve my problem.
    I made two test queries, in one query I have made the CKFu2019s and RKFu2019s directly at the infoprovider, and dragged and dropped in the KF structure. In the other query I made the CKFu2019s and RKFu2019s in the query KF structure itself. The query where I have the CKFu2019s and RKFu2019s at the infoprovider that query times out, the other query where I put the CKFu2019s and RKFu2019s in the query KF structure doesn't has this performance problem.
    What I donu2019t know is why the query is failing when I use RKFu2019s and CKFu2019s from the infoprovider, the other query donu2019t have this problem.
    Please advise how to proceed.
    Thanks in advance,
    Arash

    Hi,
    Please check the following notes which should be useful.
    1387593 - Performance optimization for query change/generation
    1416737 - Performance optimization for query change/generation(2)
    1396485 - Performance optimization for query check/save
    Then please execute the SE38 report ANALYZE_RSZ_TABLES (see notes
    1472915, 1506560) and repair/correct the different tables to optmize
    the query definition tables.
    Regards,
    Amit

  • Query Selection Screen restriction

    Hello All,
    In my query selection screen, i have date, month and week as selection parameters. Now my requirement is that user should select only one of them. If he selects more than one ie combination of two or all three, than query should not show any data.
    Can this be achieved? If yes how.
    Regds,
    Shashank

    Hi,
    You can try out, customer exit with I_STEP = 3.
    using which a exception will be raised if user enters value for more than one variable.
    Hope it helps......
    Regards,
    Umesh.

  • Query Selection Screen does not appear in Web Analyzer

    Hi Experts,
    Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
    As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
    Kindly let me know the possibility for selection screen not appearing.
    Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
    Regards
    Suresh Kumar

    Dear Suresh,
    You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
    In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
    Also I would like to explain you the behavior of Web Analyzer,
    Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
    when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
    affect the variable screen and would not redisplay the variable screen as you require.
    Regards,
    Arvind

  • Calling a screen at pushbutton in selection screen

    hii all,
    please provide me the suitable code for calling a screen on pushbutton in selection screen....
    thanks
    babbal

    TABLES: SSCRFIELDS.
    TYPE-POOLS ICON.
    DATA: FUNCTXT TYPE SMP_DYNTXT.
    PARAMETERS: P_VBELN LIKE VBAK-VBELN.
    SELECTION-SCREEN: FUNCTION KEY 1.
    INITIALIZATION.
      FUNCTXT-ICON_ID   = ICON_NEXT_OBJECT.
      FUNCTXT-ICON_TEXT = 'PUSHBUTTON'.
      SSCRFIELDS-FUNCTXT_01 = FUNCTXT.
    AT SELECTION-SCREEN.
      CASE SSCRFIELDS-UCOMM.
        WHEN 'FC01'.
          CALL SCREEN 100.
      ENDCASE.
    regards,
    prakash reddy .s

  • IS IT POSSIBLE TO CALL FUNCTION IN sap QUERY sq01

    IS IT POSSIBLE TO CALL FUNCTION IN sap QUERY sq01

    Use enhancement project SQUE0001 for background downloads of query data.  Use the 'Private File' option with the query execution.

  • How to do screen enhancement in the selection screen of CS15 transaction

    Hi friends,
    I have a unique requirement where I have to do screen enhancement in the selection screen of CS15 transaction to get the top level material,
    Can you please tell how this could be achieved ?
    Looking forward  your valuable inputs.
    Thank You.
    Regards,
    S Sadhya

    Hi,
    This can be achieved by using user-exit. Specifically screen-exit. Check these two exits related to transaction CS15. They may be helpful to you.
    <b>
    PCSD0002      BOMs: Customer fields in item  
    PCSD0003      BOMs: Customer fields in header
    </b>
    Let me know if you need any other information.
    Regards,
    RS

  • SQ01 -  Include a check box on ABAP query Selection screen

    Hi Experts,
    For my Abap Query, on the selection screen i am planning to include a check box such that if i click on the check box then a field will be displayed in the resulting output . On the other hand if i do not check on i should not be able the field in the output.
    Please tell me how do i do this.
    Thanks
    Venkata Pradeep.

    In infoset, Extras code tab
    Code section: At selection-screen output
    Do something like below:
      IF radiobutton1 = 'X'.    
         LOOP AT SCREEN.      
              IF screen-group1 = 'XXXX'.         "XXX is the filed group name you want to hide., you have to                                                                  find out what is it.
                   screen-input = '1'.        
                   screen-invisible = '0'.        
                   MODIFY SCREEN.      
              ENDIF.    
         ENDLOOP.  
    ELSE.   
         LOOP AT SCREEN.     
              IF screen-group1 = 'XXX'.        
                   screen-input = '0'.       
                   screen-invisible = '1'.       
                   MODIFY SCREEN.     
              ENDIF.   
         ENDLOOP. 
    ENDIF.

  • Selection screen for SAP Query: OR between options

    Hi,
    I have a SAP Query and I need a variant where either of two  fields should not be 0. Is there some way to add an OR between two selection options? I can't change the actual query because it's used with many other variants.
    Thanks

    In abap you can do it, but not sure how you do it in query.
    if s_matnr[] is initial or s_werks[] is initial.
    Do something
    endif.

  • Infoset Query Selection Screen Issue

    Dearf Experts,
    I am a SAP-PM functional area. (Do know very little about technical sideof SAP)
    I am working on SQ03/SQ02/SQ01 for the first time to create an Infoset query.
    The output screen is incontrol and showing all the fields as per my specifications.
    My problem is the Selection Screen. This is displaying to many things not desired by me.
    1. Two tabs (I do not expect any tabs)
    2. Many Screen areas, repeating the fields (1000,0100,0101,0102,0103) 
    The screen area of my specified fields in at the bottom.
    My expectations about the selection screen is - just like simple one as in the case of SQVI.
    Please help me in getting through this problem.
    Regards
    Jogeswara Rao

    Gungor Ozcelebi,
    Thank you very much for responding,
    Exactly as you said, I am using Notifications logical database.
    (I was suspecting this reason)
    Infact I found about 8 fields (Perhaps related to Date fields, checkboxes etc) are automatically selected from the LDB.
    My trials to delete them were invain. They reappear while saving.
    I would be very thankful, if you help me in this case.
    Regards...

Maybe you are looking for