Call se38 program from an abap proxy

Hi, All,
For some reasons, I have to call a se38 program (or tcode) instead of calling a FM from an abap proxy. Also I have to pass an internal table to the program (or tcode). Is there anybody know how to do it? Thanks.
Meiying

Is there no BAPI available for this "reason"?
Or create your own (BAPI compliant) FM and just call that?
Please explore transaction BAPI (incase you are not aware of it yet).
If you exposed a remote way to submit (any) report using an internal table which that "any report" can use, then chances are good that your ABAP proxy would be a bit of a security hazard...
Or am I missing the point here?
Perhaps you could explain the scenarioa bit, and then appropriate solutions can be suggested.
Cheers,
Julius

Similar Messages

Error while calling java program from ABAP

Hi Experts,
We are trying for RFC inbound scenario.
We followed the below blog
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
We are working with SAP JCO 3.0.2
We are getting the error : 'STFC_CONNECTION' could not be found in the server repository.
After I run the Java server program if I execute the RFC destination directly from SM 59 it is showing successful messages.
If I stop the java program then this RFC is failing. Based on this we concluded that RFC to Java connection is working fine.
But as mentioned in blog if we call the RFC Destination from ABAP program it is giving the below error,
'STFC_CONNECTION' could not be found in the server repository.
If we test the RFC destination using RFC_TRUSTED_CHECK standard FM we are getting the below error.
'RFCPING' could not be found in the server repository.
We create the RFC destination of Type : TCP/IP as exactly mention in the blog.
Please help us in resolving this issue.
Thanks
Prince

Pabi,
Using the RFC connection,we can establish a link between Java and SAP.
Afterwards,hope we can call Java program from ABAP.
Below is the sample piece of code to establish RFC connection(link) between Java and SAP.
DATA: REQUTEXT LIKE SY-LISEL,
      RESPTEXT LIKE SY-LISEL,
      ECHOTEXT LIKE SY-LISEL.
DATA: RFCDEST like rfcdes-rfcdest VALUE 'NONE'.
DATA: RFC_MESS(128).
REQUTEXT = 'HELLO WORLD'.
RFCDEST = 'JCOSERVER01'. "corresponds to the destination name defined in the SM59
CALL FUNCTION 'STFC_CONNECTION'
   DESTINATION RFCDEST
   EXPORTING
     REQUTEXT = REQUTEXT
   IMPORTING
     RESPTEXT = RESPTEXT
     ECHOTEXT = ECHOTEXT
   EXCEPTIONS
     SYSTEM_FAILURE        = 1 MESSAGE RFC_MESS
     COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
IF SY-SUBRC NE 0.
    WRITE: / 'Call STFC_CONNECTION         SY-SUBRC = ', SY-SUBRC.
    WRITE: / RFC_MESS.
ENDIF.
Regards,
Sree

How to call java program from ABAP

Hi Experts,
My requirement is to call java programs from ABAP. For that i have set up SAP JCO connection by using this link http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/739. [original link is broken] [original link is broken] [original link is broken] Connection gets sucessfully. After this how to call java program from ABAP as per our requirement. Please help me out.
Also i tried this way also.. but while executing the DOS Command line appear & disappear in few seconds. So couldnt see the JAVA output. Please help me out to call java programs in ABAP..
DATA:command TYPE string VALUE 'D:Javajdk1.6.0_20 injavac',
parameter TYPE string VALUE 'D:java MyFirstProgram'.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = command
parameter = parameter
OPERATION = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
OTHERS = 8.
Thanks.

This depends on the version of your Netweaver Java AS. If you are running 7.0, you will have to use the Jco framework. The Jco framework is deprecated since 7.1 though. If you want to build a RFC server in 7.1 or higher, it is adviced that you set it up through JRA.
Implement an RFC server in 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/frameset.htm
Implement an RFC server in 7.1 or higher:
http://help.sap.com/saphelp_nwce72/helpdata/en/43/fd063b1f497063e10000000a1553f6/frameset.htm

Calling Java program from ABAP

Hi All,
my ABAP program downloads one file to one folder. Then one Java program is running to Encrypt the file.
Now , they want to call the JAVA program in ABAP, so that they can encrypt the file before downloading.
Is it possible to call a Java program from ABAP ? If Yes, please give me the detailed procedure.
Thanks
pabi

Pabi,
Using the RFC connection,we can establish a link between Java and SAP.
Afterwards,hope we can call Java program from ABAP.
Below is the sample piece of code to establish RFC connection(link) between Java and SAP.
DATA: REQUTEXT LIKE SY-LISEL,
      RESPTEXT LIKE SY-LISEL,
      ECHOTEXT LIKE SY-LISEL.
DATA: RFCDEST like rfcdes-rfcdest VALUE 'NONE'.
DATA: RFC_MESS(128).
REQUTEXT = 'HELLO WORLD'.
RFCDEST = 'JCOSERVER01'. "corresponds to the destination name defined in the SM59
CALL FUNCTION 'STFC_CONNECTION'
   DESTINATION RFCDEST
   EXPORTING
     REQUTEXT = REQUTEXT
   IMPORTING
     RESPTEXT = RESPTEXT
     ECHOTEXT = ECHOTEXT
   EXCEPTIONS
     SYSTEM_FAILURE        = 1 MESSAGE RFC_MESS
     COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
IF SY-SUBRC NE 0.
    WRITE: / 'Call STFC_CONNECTION         SY-SUBRC = ', SY-SUBRC.
    WRITE: / RFC_MESS.
ENDIF.
Regards,
Sree

Call batch program from ABAP program

hai guys,
I have created one batch file in WINDOWS NT.
Now i want to call this file from my ABAP program.
How can i do this..is there any FM here..pls let me know.
ambichan.

Hi ambichan,
To execute a program on the application server, it really is best if you create an external command (using SM69).
Here is an example call of the program:
* call executable
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
    EXPORTING
      COMMANDNAME                    = command " Your external program
      ADDITIONAL_PARAMETERS          = param " Your parameters
      OPERATINGSYSTEM                = 'WINDOWS NT'
*     TARGETSYSTEM                   = sy-host
*     DESTINATION                    = destination
*     STDOUT                         = 'X'
*     STDERR                         = 'X'
*     TERMINATIONWAIT                = 'X'
*     TRACE                          =
    IMPORTING
      STATUS                         = status
      EXITCODE                       = exitcode
    TABLES
      EXEC_PROTOCOL                  = exec_protocol
    EXCEPTIONS
      NO_PERMISSION                  = x_no_permission
      COMMAND_NOT_FOUND              = x_command_not_found
      PARAMETERS_TOO_LONG            = x_parameters_too_long
      SECURITY_RISK                  = x_security_risk
      WRONG_CHECK_CALL_INTERFACE     = x_wrong_check_call_interface
      PROGRAM_START_ERROR            = x_program_start_error
      PROGRAM_TERMINATION_ERROR      = x_program_termination_error
      X_ERROR                        = x_x_error
      PARAMETER_EXPECTED             = x_parameter_expected
      TOO_MANY_PARAMETERS            = x_too_many_parameters
      ILLEGAL_COMMAND                = x_illegal_command
      WRONG_ASYNCHRONOUS_PARAMETERS = x_wrong_async_parameters
      CANT_ENQ_TBTCO_ENTRY           = x_cant_enq_tbtco_entry
      JOBCOUNT_GENERATION_ERROR      = x_jobcount_generation_error
      OTHERS                         = x_others.
if sy-subrc <> 0 or exitcode <> 0.
*   error dialog only, if caller is a dialog user
    if sy-batch is initial.
      call function 'DB6_SHOW_SXPG_ERROR'
        exporting
          command     = 'DB6CLP'
          parameters = param
          server      = sy-host
          return_code = sy-subrc
          exitcode    = exitcode
        tables
          exec_protocol = exec_protocol.
    endif.
endif.
With this code, if the user is in dialog mode the output from the external command is displayed to them. Otherwise, you can do what you want with the EXEC_PROTOCOL table which contains the output from the external program.
Hope that helps.
Cheers,
Brad

Problem regarding calling a program from another program

Hi,
I have a requirement that i need to call a program from another program and in that case the called program should be executed with a value in the selection screen coming from the first program..i.e.
a standard report to view the user Notes for annual leave is RPTARQDBVIEW. Can we create a report to display all the users under a manager as a hyperlink and run the report(RPTARQDBVIEW), with the pernr of the employee selected
Regards,
saumik

Submitting a report using ranges for select-options
* Define range for ltak-tanum
RANGES: r_tanum FOR ltak-tanum.
* Read values from database tabel into the range
* These values are later used for select-options in the report
SELECT * FROM ltak
WHERE lgnum = w_lgnum AND           "Warehouse number/complex
        vbeln = w_screen1000-io_vbeln.      "Transfer order number
MOVE ltak-tanum TO r_tanum-low.
MOVE 'I' TO r_tanum-sign.
MOVE 'EQ' TO r_tanum-option.
APPEND r_tanum.
ENDSELECT.
* Submit report with range
SUBMIT zmm00100 WITH p_tanum IN r_tanum.
or
Submitting a report from ABAP with selection criterias
TYPES: tt_selection TYPE STANDARD TABLE OF rsparams.
DATA: l_iblnr        TYPE st_iblnr,
*     Define internal table and work area for select-options
        l_selection    TYPE rsparams,
        li_selection   TYPE tt_selection.
* Create selectIon table
LOOP AT gi_iblnr INTO l_iblnr.
    CLEAR l_selection.
    l_selection-selname = 'IM_IBLNR'.    "Option name
    l_selection-kind     = 'S'.           "S= select options P=Parameters
    l_selection-sign     = 'I'.           "Sign
    l_selection-option   = 'EQ'.          "Option
    l_selection-low      = l_iblnr-iblnr. "Value
    APPEND l_selection TO li_selection.
ENDLOOP.
* Submit report
SUBMIT rm07idif WITH SELECTION-TABLE li_selection AND RETURN.
Regards,
Prabhudas

Calling a webservice from webdynpro ABAP.

Hi,
Anybody have doc/material with screenshots on calling a webservice from webdynpro ABAP (In WAS 7.0 version using service calls ) with clear steps ?
Thanks in advance. Ponts will not be a constraint for right answers
Praveen
Edited by: Praveen kumar Kadi on Feb 23, 2009 11:19 AM

Hi Praveen,
1st Step : configure Logical Port
http://help.sap.com/saphelp_nw70/helpdata/EN/16/285d32996b25428dc2eedf2b0eadd8/frameset.htm
2nd Step : Generate Proxy Object
http://help.sap.com/saphelp_nw70/helpdata/EN/16/285d32996b25428dc2eedf2b0eadd8/frameset.htm
3rd Step : Instantiating the proxy object & calling the methods exposed by webservice
data: sys_exception type ref to cx_ai_system_fault,
      sys_exception2 type ref to cx_ai_application_fault,
      client_proxy type ref to zco_myesa, "MY PROXY CLASS
      lv_ret_code type int4,
      lv_input type zsend_email_input,
      lv_response type zsend_email_response.
data: lv_from type string,
      lv_from_address type string,
      lv_to type string,
      lv_to_address type string,
      lv_subject type string,
      lv_msg type string.
lv_input-from = 'MYSAPTEST'.
lv_input-from_address = '<someAddress>'.
lv_input-to = 'Prashant'.
lv_input-to_address = '<someAddress>'.
lv_input-subject = ' TEST'.
lv_input-msg_body = ' Hi this is wonderfull to see it work'.
try.
create object client_proxy
exporting
logical_port_name = 'BASIC'. " Basic is a TYPE G RFC Destination
call method client_proxy->send_email
   exporting
     input = lv_input
   importing
     output = lv_response    .
catch cx_ai_system_fault into sys_exception .
    data lv_err type string.
     lv_err = sys_exception->if_message~get_text( ).
     write: / lv_err.
catch cx_ai_application_fault into sys_exception2 .
     lv_err = sys_exception->if_message~get_text( ).
     write: / lv_err.
endtry.
if lv_response is initial.
   write: /'Not Executed'.
else.
   write: /'Did Execute'.
endif.
Greetings
Prashant

How to call a webService from WebDynPro ABAP ?

We are trying to call a webService from WebDynPro-ABAP application. It is not working, While if we are calling the WebService from a Report, it is working.
How exactly do we call a WebService from a WebDynPro-ABAP application?
What are the main steps involved ?

Hi Phani,
You will need to create a service call as follows.
Right click on your WD component name and select Create->Service Call
The wizard will guide you through a series of steps to make a Web Service Call. On the 3rd screen, it will give you options such as Function Module, Web Service, etc
Before making a service call, you will need to create a proxy for the Web service in the ABAP Workbench using a WSDL document as a basis. To create or consume Web services, you will need the authorizations associated with the role SAP_BC_WEBSERVICE_ADMIN.

Calling a Program from Quomo Feature

From the featuer QUOMO i need to call a cust ABAP Program to make a decison and return the value for QUOMO.
i'm confised that how i would imort the parameters from the efature QUOMO i.e., the personal number and after making the decision how the value of QUOMO could be exported back.
through some other postings i found that the program i'd create should be of type "Subroutine pool".
but i'm still not able to determine how the import and export of variables will take place.

To call a program from feature Quomo you need to add a form named ext_call_f. The form must use the following parameters:
FORM EXT_CALL_F USING NAMEN BACK STATUS PME87 STRUCTURE PME87.
IF PME87-PERNR = '1234'.
BACK = '1'.
ELSE.
IF PME87-PERNR = '4567' .
BACK = '2'.
ENDIF.
ENDIF.
STATUS = 0.
ENDFORM.
Feature Quomo passes the structure to your program and reads the return value BACK. Depending on the value of pernr you can set the value of BACK in the program.
You can call the program from the feature like this:
&QUOMO(Z_MY_PROGRAM)

Calling another program from the current program

Hi all,
In our requirement we are calling another program from our current program .
In the current program( from which we are calling ) we are giving file name in the selection screen
and when we run the current program we are successfully going to other program but our main requirement is to higlight the file name which we had given earlier .
Note : The called program doesnt have any selection screen.

HI
use EXPORT and IMPORT key words for passing data from one program to another program.
as the called program is available in the same session you can use above key words which means you are accessing ABAP MEMORY.
You can also use SET and GET key words which means SAP memory
take F1 help there are examples tooo and detailes explanation abou the same
Regards
Ramchander Rao.K
Edited by: Ramchander Krishnamraju on Dec 24, 2008 7:05 AM

How to call a program from FM which acts as popup?

Hi,
I need to call a program from FM and once the program is called it needs to be opened as a popup. Maybe we need to assign size when we call from FM or do we need to give size in the program it self?
I know i can either use the Submit command or Call Transaction command. But that it self will open a full screen which i dont want. It needs to be of a smaller size.
Any help will be appreciated.
Thanks

Hi,
Try this,
REPORT ZEX_POPUPSCREEN .
*& POPUP SCREEN
* Table Declaration
TABLES VBAK.
* Start of Selection
START-OF-SELECTION.
SELECT * FROM VBAK.
WRITE / VBAK-VBELN HOTSPOT ON.
ENDSELECT.
* Display the screen
AT LINE-SELECTION.
WINDOW STARTING AT 10 10
ENDING AT 40 25.
WRITE:/ 'VBAK-VBELN, VBAK-KUNNR'.
Regards,
Nikhil.

Calling Concurrent program from OAF-PDF Outtput not in English

Hi ,
I've successfully done "Calling Concurrent Program from OAF" once i clicked the button which i have in my page it generates RequestID and that shows request page,In that when i click "Output" icon the PDF file is opened.
But in that PDF file it shows the datas in the different language.
For example Emp name column is shown as
ΚΙΝΓ
ΧΛΑΡΚ
ΣΧΟΤΤ
ΦΟΡ∆
ΣΜΙΤΗ
ΑΛΛΕΝ
Αδαµσ
Σεντηιλςελ
Σαραϖανα Χ
Σεενυ
Σαβενα
Ηαριkindly help me...
Regards,
Saro

Hi Hussein,
Here I've shown the details of log file
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXCON module: XXCON
Current system time is 29-DEC-2010 11:37:23
+-----------------------------*
*| Starting concurrent program execution...*
+-----------------------------*
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
Report Builder: Release 10.1.2.3.0 - Production on Wed Dec 29 11:37:29 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Executing request completion options...
------------- 1) PRINT   -------------*
Printing output file.
Request ID : 5865903
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-DEC-2010 11:37:33
Regards,
Saro

How to call 'C' programs from stored procedures?

Hi
Did anybody tried to call 'C' programs
from oracle stored procedures?
If anybody knows, can you please send
how to configure the listener.ora and
tnsnames.ora. If its possible post all the
information from the begining with examples.
thanks....

Oracle JDBC did not support return a result set, if you are using Oracle 9i, you can use pipeline function, then using the TABLE() function the get the row.
Good Luck.
Welcome to http://www.anysql.net/en/

Call C++ programs from PL/SQL

Can someone give me an example of how to call C++ programs from PL/SQL ASAP please?
Thanks
Chitra

Hello,
You can use External Procedure facility of of PL/SQL (Assuming your DB is 8 or 8i)
Please refer the doc at http://oradoc.photo.net/ora8doc/DOC/server803/A54654_01/10_procs.htm
James

Calling dialog program from report

Hi All,
I need to call dialog program from report and do not want the initial screen to be shown and execute the dialog program. can this be possible, if yes please let me know this to do this, when I tried using leave to transaction its showing the initial dialog screen.
Thanks in advane
jog

Hi,
Create a Z trnsaction Code for the Transaction you want to call.
Go to SE93. Give Transaction name and click on create.
Select start object as 'Transaction with Variant' or 'Transaction with Parameter'.
On second screen give transaction name and check the <b>check box for 'Skip initial screen'</b>.
Find out the initial screen for the transaction and mention it.
Now, you can call this Z transaction in your program.

Call se38 program from an abap proxy

Similar Messages

Maybe you are looking for