Call settings changed in one system

Hi ,
I have changed my call settings from one system and skype used in other system for the same login doesn't reflect the same setting. Will the settings stpred in local not updated in the server. Also the IM msgs not able to view from the other systems. It is visible only the system where we actually do chat. Please help.

Did you make sure the graphic already exists in the QA system? Note: graphics are cross-client.
For more information, [your question has been already asked in the forum|http://www.sdn.sap.com/irj/scn/advancedsearch?query=ssfcomposer159transport].
Edited by: Sandra Rossi on Feb 24, 2010 10:30 AM
You found by yourself. Good.

Similar Messages

How to move the changes from one system to other without using CMS

Hi
In our project they are migrating NWDI 6.40 to NWDI 7.0.
During migration CMS won't be available.
Could you plesae tell what are the different options are there to move the WebDynpro changes from (NWDS) Development to Quality system and then production system without using CMS server?
If i will create a development package and import this packgae in Quality package will my new changes also be available in Quality server?
Thanks & Regards
Susmita

Hi Susmita
I wasn't completely sure, but from your description of your problem, it seemed like you would have access to your DTR during your upgrade. The following solution assumes as much. If this is not the case, you'll need to do things slightly differently, but the solution will still be possible.
Depending on the scope and size of your changes, it may be practical for your developers to deploy directly from their NetWeaver Developer Studio (or for a designated administrator to install the NWDS and do the same). To do so, from the Development Configurations perspective, create a new NWDS project for each of the DCs you want to deploy. Then right-click the project and choose from one of the deployment options. (Deploy new archive and run will allow you to see if your deployment has taken effect.) When deploying, the target server is the one set up as your J2EE engine in the NWDS properties - you'll consequently have to modify this when the target server for your deployment changes (from QA to production, or vice versa).
Note that this is only applicable in certain situations, and only as a short term stopgap measure. This sort of practice - developers or administrators deploying haphazardly to servers other than those intended for development - is precisely what the NWDI is designed to prevent (and is one of very few things it's fairly good at doing). For instance, if your QA and production systems are attached as TEST and PROD runtimes systems respectively in your NWDI, a full assembly and subsequent full deployment would usually occur to these servers when deploying with the NWDI. This is a much stronger guarantee of consistency than the build that will be performed within your local NWDS to deploy your changes. (Conversely, the rigidity of the assembly is perhaps the NWDI's greatest design flaw.)
(Also, Snehal: thanks for the information on the sapmake_util blog. It's not something I've encountered before and looks very useful.)
James

CALL 2 RFCS FROM ONE SYSTEM...

One of my function module FUNCTION_Y on the system Y is calling a RFC FUNCTION_X to a system X. Once the call is over. it returns to the system Y data needed to generate a program, Function module FUNCTION_Y generates then the program within the one it calls an RFC to the same system X
The problem is that it prompt the user twice for a user and a password. And as between the two calls there is no user dialog. The user does not notice that he is prompt a second time for his user and pass...
If you have any suggestions? How can I may be do so the user is only asked once ? Maybe can I retain User and password and then call a function module to create the connection ?
Thank you

Hi Stephen,
I assumed you know that you can control in SM59 the login id and password of you RFC destination system. Your requirement is to prompt user login for the first RFC call but not the second.
If this is the case, you might want to create another RFC destination for the same system you are having. In the second RFC destination, populate the user id and password. Then in your program, the first RFC call, you use the first RFC destination which prompted you for id and password. For the second RFC call, use the second RFC destination.

How can I make a change on one computer effect other compujters automatically

If I change a bookmark on one computer, I want that bookmark reflected on all the other computers. It seems as if I have to do the sync on system A to get the change to the server; then I must go on System B, change the sync type to copy from the server and do a sync. This is way too cumbersome. If synch means to have the same data everywhere, why isn't the default to make this happen as one logs into each system? right now if I make a change on one system and do a synch, it will get overwritten when I go to another sysem and synch.

We use test sites on our remote server. We purchase a cheap $2.99 .info domain and give it a unique domain name. We then make it an addon domain on our remote server.
When we're building sites we then make a unique subdomain to the addon domain. We upload our files to each unique site's subdomain so we can see and test them live,.then we can contact the client
and tell them to take a look at their site live, which at the time is a subdomain, etc.and uploaded.
Once we have the site completed and uploaded to the designated subdomain we then contact the client and ask them to test their site and see if it's ready or do we need to make more changes.
We use a hosting package for this that cost us less than $30.00 a year with unlimited domains and subdomains. We've got about 30 subdomains on it now and they're not even making the usage wiggle because of taking very few hits.
Once the site is completed and approved we then delete that particular site's subdomain and upload to the clients remote server.
We don't test our sites locally, we test all our sites live as we build them using a subdomain to the .info tld domain on our remote server. You can also buy hosting packages for around $12.00 a year to test your sites on.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and of facetime on settings,change id's.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and off facetime on settings,change id's, mute,unmuted,reset network settings!! But nothing change,i mean is there a problem with my ipad or the facetime has a problem right now?my friend seems doesnt have a problem with her ipad,it just happen suddenly yesterday it was ok but today when i tried calling my husband this is what happens, can anyone please help me!!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Java doesn't pick up system's DNS settings change until restarted

Hello,
I have a service running on a few Linux computers. Those computers have a NIC, which is configured with a fixed IP address. So /etc/resolv.conf contains the IP address of the LAN's DNS server. But most of the time, the computers are not plugged into the LAN at all. Instead, they connect themselves periodically to the Internet by establishing a ppp connection. When it happens, the ISP's DHCP server assign them new IP parameters, including their DNS server's IP address. And /etc/resolv.conf gets updated with this address.
But it seems that java doesn't take care of DNS change taking place during a run. Which means that my program (started at boot with no connectivity at all) tries to connect to some host, and obviously trigger an "UnknownHostException" (at that point it does try to contact the LAN's DNS server). Quite logical. Later, the ppp link become active. But my program still try to contact the LAN's DNS server, despite the new configuration in /etc/resolv.conf. As such, it will forever trigger UnknowHostExceptions, until it gets restarted (it will then pick up the new settings) or it is plugged back into the LAN (it will finally reach the LAN's DNS server).
This is quite a problem as during one single execution, the machine may encounter several DNS configuration changes, and this problem basically means that it will be impossible for my application to resolve any name at all.
So is there a way to tell Java to re-read the system wide DNS configuration? Or is there some option to prevent Java to "cache" the DNS server to use?
To demonstrate my problem, I've written a simple test case, see below.
To get the problem:
1) Put a bogus DNS server into your /etc/resolv.conf
2) Start the test program. Wait for some time: it will trigger UnknownHostExceptions.
3) Fix the entry in /etc/resolv.conf, and check it actually works (eg ping www.google.be)
4) Test program will continue to trigger UnknownHostExceptions forever.
One interesting fact is that someone tried this test on Windows, and didn't suffer from this behaviour, eg the application reacts to DNS system settings changes dynamically. So it looks like a Linux-only problem.
Thanks in advance for your insight.
Pierre-Yves
package com.test.dnsresolver;
import java.net.InetAddress;
import java.net.UnknownHostException;
public class DnsResolver {
    private static String urlString = "www.google.com";
    public static void main(String[] args) {
         * Specified in java.security to indicate the caching policy for successful
         * name lookups from the name service. The value is specified as as integer
         * to indicate the number of seconds to cache the successful lookup.
        java.security.Security.setProperty("networkaddress.cache.ttl" , "10");
         * Specified in java.security to indicate the caching policy for un-successful
         * name lookups from the name service. The value is specified as as integer to
         * indicate the number of seconds to cache the failure for un-successful lookups.
         * A value of 0 indicates "never cache". A value of -1 indicates "cache forever".
        java.security.Security.setProperty("networkaddress.cache.negative.ttl", "0");
        int loopCounter = 0;
        while (true) {
            InetAddress resolved;
            try {
                resolved = InetAddress.getByName(urlString);
                System.out.println("Loop " + loopCounter + ": resolved IP address: " + resolved);
            } catch (UnknownHostException e) {
                System.out.println("Loop " + loopCounter + ": UnknownHostException");
                e.printStackTrace();
            loopCounter++;
            try {
                Thread.sleep(1000);
            } catch (InterruptedException e) {}
}

Well, the nameservice property allowing to specify my DNS server of choice is interesting (I didn't know about those), but not very usable, as the DNS server to use is not known in advance (it may be whatever the ISP tells me to use at the time where the ppp link gets established). So no real solution there.
The fact that it caches /etc/resolv.conf content for 300s is very interesting, but having no possibility to impact on this duration really is a pity. There should be some kind of property to fix this behaviour. So as you say, a custom provider may be the only solution.
So far, the hack I use to get this working is based on code similar to this one (it is presented here in a similar form than my test case above). Obviously, reading the /etc/resolv.conf for each dns resolution is not an option in a real environment, but you get the idea.
package com.test.dnsresolver;
import java.io.BufferedReader;
public class DnsResolver {
     private static final String urlString = "www.google.com";
     private static final String resolvConf = "/etc/resolv.conf";
     public static void main(String[] args) {
          int loopCounter = 0;
          while (true) {
               loopCounter++;
               try {
                    Thread.sleep(1000);
               } catch (InterruptedException e) {}
               // Parse the current DNS server to be used in the config
               String nameserver = null;
               try {
                    BufferedReader input = new BufferedReader(new FileReader(new File(resolvConf)));
                    String currentLine = null;
                    while (( currentLine = input.readLine()) != null){
                         // Take care of potential comments
                         currentLine = currentLine.substring(0, currentLine.indexOf("#") == -1
                                   ? currentLine.length() : currentLine.indexOf("#") );
                         if (currentLine.contains("nameserver")) {
                              // It is the line we are looking for
                              nameserver = currentLine;
                              break;
               } catch (FileNotFoundException e) {
                    System.out.println("Loop " + loopCounter + ": FileNotFoundException");
               } catch (IOException e) {
                    System.out.println("Loop " + loopCounter + ": IOException");
               if (nameserver == null) {
                    // No "nameserver" line found
                    System.out.println("Loop " + loopCounter + ": No nameserver found in configration file!");
                    continue;
               // Trim it to just contain the IP address
               nameserver = (nameserver.replace("nameserver", "")).trim();
               System.out.println("Loop " + loopCounter + ": Going to use DNS server " + nameserver);
               // At this point, we know which server to use, now perform the resolution
               Hashtable<String, String> env = new Hashtable<String, String>();
               env.put("java.naming.factory.initial", "com.sun.jndi.dns.DnsContextFactory");
               env.put("java.naming.provider.url",    "dns://" + nameserver);
               DirContext ictx;
               try {
                    ictx = new InitialDirContext(env);
                    Attributes attrs1 = ictx.getAttributes(urlString, new String[] {"A"});
                    System.out.println("Loop " + loopCounter + ": Manual resolution: +" + attrs1.get("a").get() + "+");
               } catch (NamingException e) {
                    System.out.println("Loop " + loopCounter + ": NamingException");
}So maybe I should adapt and package this into a proper provider and specify it for sun.net.spi.nameservice.provider. Any link, info or example about how a proper provider should look like?
Thanks for your advices!

Settings get changed although no system update or manual change

I changed some settings in Gnome under Settings>>Preferences>>Keyboard and all was working fine.
I enjoyed the new settings for a few days, then today I just noticed that the settings are back to default, but I haven't performed a system update or changed any settings manually.
How, why and when do the settings change by themselves? I swear i'm not going crazy on this one! hehe
Last edited by trusktr (2010-11-13 00:22:41)

haha, Ok, well it's very wierd.
What i'm changing is the keyboard repeat delay and speed, and the cursor blink rate.
I just turned on the computer today and the settings were reset again. How strange! When i'm done working, i'm going to restart the computer and see if the settings get changed back magically...

Call a program of another system from one system

Hello Gurus,
I have a module pool in R/3 in which i have a tab which call
a progam of another system.
Actaully a screen is call,
as the user which i hav to use is a system user i can not use call transtion.
its gives me a error.
Dynpro_send_in_background.
So please me with anothe way of calling the transaction with user type system user.
points will be surely awared
aditya.

Hi all,
I know that if i use user type as service or dialog it will work
with the call transaction.
But i have to use usertype as system user, as it is recommanded from security point of view.
So i need to get that screen from my R/3 system user user type as system user.
Do any one have any altanative solution to it.
Thanks
Aditya.

How do I change answering a call from slide to one button push

How do I change my iPhone 5 when receiving a call from slide to one button answer?

Utaginat wrote:
... so I want the push button type instead.
Apple Feedback

Replicate changes from one SAP System to another

I have a requirement in which I have done some changes in one SAP System and it is not getting reflected to the other one. Please note that the SAP System which I am refering to is the one we get from SM51 Transaction code. Please note that the SAP System ID and the client is the same.
Thanks
Arghadip

Yes I am able to view all the systems but how can I replicate the changes from 1 to another. We had done the changes in system A but it is not getting reflected in system B. Is there any ways to replicate it.
No Experts to answer this question?????
Thanks
Arghadip

How to change the Source system from ONE DataSource?

Hi,
I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
Thanks for your help

Hi Marcel,
As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
Regards,
Durgesh.

The procedure to change kernel of system with database of one MT and dia. i

Hello
I wander what is procedure to change kernel of system with database instance of one machine type(i.e. HP-UX) and dialog instance of other MT type (i.e. Linux).
I usually change kernel on path /usr/sap/<SID>/SYS/exe/run
But in this case there will be two kernels(where I should copy them

Hi,
As I understand, Your CI/DB on Hp-UX and dialog instance on Linux.. For kernel upgrade check below link:
SAP Kernel update on different Operating System
Thanks
Sunny

HT2341 why does my sound icon grey out and doesn't allow me to make changes on the system settings

why does my sound icon grey out and doesn't allow me to make changes on the system settings

When you go to System Preferences > Sound what does it say for Output? Have you had headphones plugged in? Sometimes the headphone jack gets stuck thinking it has something plugged in when there isn't anaything there. SMC also has something to do with Sound:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.

Change ownership from "system" on mounted volume?

I have an external firewire drive with 3 partitions all of which are mounted on an iMac, and which until recently all had the same ownership and permission settings under my admin account. One of the volumes (the one storing all the users' iTunes songs) somehow changed ownership to "system" and group to "wheel". I can no longer access the volume nor can the other user accounts on the iMac, although it shows up as a mounted volume when viewed in Disk Utility. "Repair permissions" is unavailable for this volume in Disk Utility. The other two volumes are unaffected and retain the original ownership settings. I'd like to reset ownership from "system" to my admin account, but do not know how to do so as apparently it needs to be done through unix commands using Terminal. What do I need to do?
iMac Mac OS X (10.4.8)

"...under Ownership & Permissions, click on the lock, enter your password, and change the Owner to you, with R&W access and the Group to admin, also w/R&W access, and click o Apply to enclosed items. Click the lock and close the Info window. No need to use Unix commands in the Terminal app."
I first tried that approach but unfortunately the procedure does not work. Under Ownership & Permissions it says "You have No Access". I can click on the lock and select my name under Details: Owner, but once I click to relock, Owner just reverts back to "system".

RDP listening port needs to be changed on one client PC - can't connect via Anywhere Access

We have a setup with Server 2012 Essentials and 10 workstations. We have setup Anywhere Access and is working fine. We have one system (Windows 7 Pro) on the network running AADS Server (use to be called XP Unlimited). This allows several users to logon
to that PC remotely at once as well as someone local using it. This PC needs to be changed from the default 3389 port due to the new AADS Server version requiring it. When ever we change the listening port we cannot remote desktop into this PC. It is available
in Remote Web Access Portal but just sits trying to connect. We have allowed the new connection in the Windows Firewall and even turned the firewall off as a test with no luck.
My question is, can we change the default 3389 port connection that the Server redirects you to for one PC on the network? If not how do you change in the Server to look at another local port for RDP once in the portal?
Thanks, Jason

Hi Jboy,
Can you navigate to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Terminal Server, WinStations and RDP-Tcp. Right click on the PortNumber dword and select Modify. Change the base to Decimal and enter a new port between 1025 and 65535
that is not already in use. Finally click OK.
http://support.microsoft.com/kb/306759
Thanks,
Umesh.S.K

Call settings changed in one system

Similar Messages

Maybe you are looking for