Call SQL Server Stored Procedure from BPEL

Could somebody send me the tutorial on how to use Stored Procedures for SQL Server (as mentioned by mchiocca in this thread: Stored Procedure Support?
[email protected]
Thanks!

This is not a possibility.
Refer to Support for Non-Oracle Stored Procedures

Similar Messages

How to call a sql server stored procedure from oracle

Hi all,
Please anybody tell me how to call a sql server stored procedure from oracle.
I've made an hsodbc connection and i can do insert, update, fetch data in sql server from oracle. But calling SP gives error. when I tried an SP at oracle that has line like
"dbo"."CreateReceipt"@hsa
where CreateReceipt is the SP of sql server and hsa is the DSN, it gives the error that "dbo"."CreateReceipt" should be declared.
my database version is 10g
Please help me how can i call it... I need to pass some parameters too to the SP
thanking you

hi,
thank you for the response.
when i call the sp using DBMS_HS_PASSTHROUGH, without parameters it works successfully, but with parameters it gives the following error
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC SQL Server Driver]Invalid parameter number[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index (SQL State: S1093; SQL Code: 0)
my code is,
declare
c INTEGER;
nr INTEGER;
begin
c := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@hsa;
DBMS_HS_PASSTHROUGH.PARSE@hsa(c, 'Create_Receipt(?,?)');
DBMS_HS_PASSTHROUGH.BIND_VARIABLE@hsa(c,1,'abc');
DBMS_HS_PASSTHROUGH.BIND_VARIABLE@hsa(c,2,'xyz');
nr:=DBMS_HS_PASSTHROUGH.EXECUTE_NON_QUERY@hsa(c);
DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@hsa(c);
end;
Create_Receipt is the sp which requires two parameters.
please give me a solution
thanking you
sreejith

How to call PL-SQL script/stored procedure from BPEL?

Assume I want to call a PL-SQL stored procedure from BPEL.
How can I do this?
Is there a simple "Hello world" example for this?
Peter

The database adapter supports calling stored procedures. There is an example called "File2StoredProcedure" that you can use as a reference to get started.

Calling MSSQL SERVER STORED PROCEDURE FROM ORACLE STORED PROCEDURE

Hi Guys,
I want to call a stored procedure from mssql server 2005 as part of a stored procedure in PL/SQL. How do I go about this? I've already set up the linked servers.

http://en.allexperts.com/q/Oracle-1451/2008/6/Calling-SQL-Stored-procedure-1.htm
Does this help?

Error when call sql server stored procedure

hello everybody,
I'm working with MII 14 and I want call a SqlServer stored procedure provided from my customer.
I configured a FixedQuery like this:
[dbo].[spElencoEntrateUscite_AV] @delta = 0, @daquando='130101', @CompanyID='000002', @Elenco = @MyCursor OUTPUT
but when i test the query i have back the error:
com.microsoft.sqlserver.jdbc.SQLServerException: Must declare the scalar variable "@MyCursor".
I tried also to set the query like this:
[dbo].[spElencoEntrateUscite_AV]
and pass Parameters:
0
130101
000002
OUTPUT
but i have this error:
com.microsoft.sqlserver.jdbc.SQLServerException: Procedure or function 'spElencoEntrateUscite_AV' expects parameter '@Elenco', which was not supplied.
Any suggestion?
thanks in advance
Alex

hello Kuldeep!
yes i solved.
I used fixed query in MII and declared the cursor:
example:
DECLARE @MyCursor CURSOR
EXEC [dbo].[spElencoEntrateUscite_AV] @delta = 0,@daquando='[Param.1]', @CompanyID='[Param.2]', @Elenco = @MyCursor OUTPUT
I hope this may help u
Alessandro

Call a SQL Server stored procedure from AppleScript

I've a stored procedure that runs and creates a new Job Number. I need to create an applescript and run this stored procedure and prompt
the user with the new Job number on screen. Does SQL server support applescript? Any suggestions/alternative? Thanks

Hi SSRS-Newebie,
I am not that into Java as well, based on my research, in your case, you shall modify the Java file as below.
import java.sql.CallableStatement;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class Main {
public static void main(String[] argv) throws Exception {
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
Connection con = DriverManager.getConnection("jdbc:sqlserver://MYSERVER;databaseName=MYDATABASE",
"USERID", "PASSWORD");
/*call the procedure here*/
CallableStatement proc_stmt = con.prepareCall("{ call Int.dbo.GetNewJobNumber(?,?,?) }");
/*set values for SP parameters*/
proc_stmt.setString(1, "6852");
proc_stmt.setString(2, "Test Job");
proc_stmt.setString(3, "Manual SQL Query");
ResultSet rs = proc_stmt.executeQuery();
/*get the result set values*/
if (rs.next()) {
/*you need to change the below to get correlated columns according to what your SP returns*/
int employeeId = rs.getInt(1);
System.out.println("Generated employeeId: " + employeeId);
} else {
System.out.println("Stored procedure couldn't generate new Id");
For more professional and technical quesions, I suggest you post them in dedicated
Java Forums.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Can a SQL Server stored procedure call an SAP function module?

Can a SQL Server stored procedure call an SAP function module.? The stored procedure will be called via a trigger when data records are added to a Z table.

You have two options:
- the other software can use the RFC SDK and call directly in the system
- the other software can use a database connect
Markus

Converting SQL Server Stored Procedure to Oracle

Hi there,
I tried to use SwisSQL to convert my SQL Server stored procedure to Orcale without much success.
Is there anyone who could help me out with this?
My SQL Server Stored Procedure is:
CREATE PROCEDURE [dbo].[SP_BackgroundCheckRequest]
     --MASTER Table
     @MASTER_ID int,
     @PERSONNEL_ID int = NULL,
@DATE_OF_BIRTH datetime = NULL,
     @GENDER varchar(1) = NULL,
     @COUNTRY_OF_BIRTH varchar(3) = NULL,
@TOWN_OF_BIRTH varchar(100) = NULL,
     @STATE_OF_BIRTH varchar(50) = NULL,
     @CHECK_CATEGORY varchar(10) = NULL,
     @CHECK_TYPE varchar(10) = NULL,
     @PRIORITY varchar(10) = NULL,
     @PRIORITY_REASON varchar(100) = NULL,
     @SCREENING_LEVEL nchar(1) = NULL,
     @POSITION nchar(50) = NULL,
     @REQUEST_SOURCE varchar(60) = NULL,
     --NAME_TYPE Table
     @NAME_TYPE varchar(5) = NULL,
     @FAMILY_NAME varchar(50) = NULL,
     @FIRST_NAME varchar(50) = NULL,
     @MIDDLE_NAME varchar(50) = NULL,
     @TITLE varchar(10) = NULL,
     @PREFFERED_NAME varchar(40) = NULL,
     @PREVIOUS_NAME varchar(140) = NULL,
     --ADDRESS_TYPE Table
     @ADDRESS_TYPE varchar(10) = NULL,
     @ADDRESS_LINE_1 varchar(30) = NULL,
     @ADDRESS_LINE_2 varchar(30) = NULL,
     @ADDRESS_LINE_3 varchar(30) = NULL,
     @COUNTRY varchar(3) = NULL,
     @SUBURB varchar(50) = NULL,
     @STATE varchar(50) = NULL,
     @POSTCODE varchar(15) = NULL,
     @START_DATE varchar(10) = NULL,
     @END_DATE varchar(10) = NULL,
     --LICENSE_TYPE Table
     @LICENSE_TYPE varchar(5) = NULL,
     @LICENSE_AGENCY varchar(15) = NULL,
     @LICENSE_NUMBER varchar(100) = NULL,
     @LICENSE_SIGHTED varchar(1) = NULL,
     --PHONE_TYPE Table
     @TELEPHONE_TYPE varchar(5) = NULL,
     @TELEPHONE_NUMBER varchar(20) = NULL,
     @MOBILE_TYPE varchar(5) = NULL,
     @MOBILE_NUMBER varchar(20) = NULL,
     @EXTENSION_TYPE varchar(5) = NULL,
     @EXTENSION_NUMBER varchar(20) = NULL,
     --PASSPORT_TYPE Table
     @PASSPORT_TYPE varchar(5) = NULL,
     @PASSPORT_NUMBER varchar(50) = NULL,
     @PASSPORT_COUNTRY varchar(3) = NULL,
     @PASSPORT_SIGHTED varchar(1) = NULL
AS
BEGIN TRANSACTION
INSERT into MASTER (MASTER_ID, PERSONNEL_ID, DATE_OF_BIRTH, GENDER, COUNTRY_OF_BIRTH,
     TOWN_OF_BIRTH, STATE_OF_BIRTH, CHECK_CATEGORY, CHECK_TYPE, PRIORITY, PRIORITY_REASON,
     SCREENING_LEVEL, POSITION, REQUEST_SOURCE)
     VALUES (@MASTER_ID, @PERSONNEL_ID, @DATE_OF_BIRTH, @GENDER, @COUNTRY_OF_BIRTH,
     @TOWN_OF_BIRTH, @STATE_OF_BIRTH, @CHECK_CATEGORY, @CHECK_TYPE, @PRIORITY, @PRIORITY_REASON,
     @SCREENING_LEVEL, @POSITION, @REQUEST_SOURCE)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into MASTER table!', 16, 1)
     RETURN
END
INSERT into NAME_TYPE (MASTER_ID,NAME_TYPE,FAMILY_NAME,FIRST_NAME,MIDDLE_NAME,TITLE)
     VALUES (@MASTER_ID,@NAME_TYPE,@FAMILY_NAME,@FIRST_NAME,@MIDDLE_NAME,@TITLE)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into NAME_TYPE table!', 16, 1)
     RETURN
END
INSERT into ADDRESS_TYPE (MASTER_ID,TYPE,ADDRESS_LINE_1,ADDRESS_LINE_2,ADDRESS_LINE_3,
          COUNTRY,SUBURB,STATE,POSTCODE,START_DATE,END_DATE)
     VALUES (@MASTER_ID,@ADDRESS_TYPE,@ADDRESS_LINE_1,@ADDRESS_LINE_2,@ADDRESS_LINE_3,
          @COUNTRY,@SUBURB,@STATE,@POSTCODE,@START_DATE,@END_DATE)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into ADDRESS_TYPE table!', 16, 1)
     RETURN
END
INSERT into LICENSE_TYPE (MASTER_ID,TYPE,AGENCY,NUMBER,SIGHTED_YN)
     VALUES (@MASTER_ID,@LICENSE_TYPE,@LICENSE_AGENCY,@LICENSE_NUMBER,@LICENSE_SIGHTED)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into LICENSE_TYPE table!', 16, 1)
     RETURN
END
INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
     VALUES (@MASTER_ID,@TELEPHONE_TYPE,@TELEPHONE_NUMBER)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting Telephone number into PHONE_TYPE table!', 16, 1)
     RETURN
END
IF ((@MOBILE_TYPE <> NULL) AND (@MOBILE_NUMBER <> NULL))
BEGIN
     INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
          VALUES (@MASTER_ID,@MOBILE_TYPE,@MOBILE_NUMBER)
     IF @@ERROR <> 0
     BEGIN
          ROLLBACK
          RAISERROR ('Error inserting Mobile number into PHONE_TYPE table!', 16, 1)
          RETURN
     END
END
IF ((@EXTENSION_TYPE <> NULL) AND (@EXTENSION_NUMBER <> NULL))
BEGIN
     INSERT into PHONE_TYPE (MASTER_ID,TYPE,NUMBER)
          VALUES (@MASTER_ID,@EXTENSION_TYPE,@EXTENSION_NUMBER)
     IF @@ERROR <> 0
     BEGIN
          ROLLBACK
          RAISERROR ('Error inserting Extension number into PHONE_TYPE table!', 16, 1)
          RETURN
     END
END
INSERT into PASSPORT_TYPE (MASTER_ID,NUMBER,COUNTRY,SIGHTED_YN)
     VALUES (@MASTER_ID,@PASSPORT_NUMBER,@PASSPORT_COUNTRY,@PASSPORT_SIGHTED)
IF @@ERROR <> 0
BEGIN
     ROLLBACK
     RAISERROR ('Error inserting values into PASSPORT_TYPE table!', 16, 1)
     RETURN
END
COMMIT

First, a basic concept. That also illustrates how different Oracle is (and PL/SQL) from SQL-Server (and T-SQL).
PL/SQL integrates two different languages. The PL language. The SQL language. It allows you to code SQL source code natively inside the PL language. The PL compiler is clever enough to do the rest - make calls to the SQL engine to create SQL cursors, bind PL variable values to bind variables in the SQL code. Etc.
PL is a "proper" programming language. It is much like Pascal (it is based on Ada, a close family member of Pascal). It is nothing at all like T-SQL.
Okay, now for the very basic rule for Oracle development.
Maximize SQL. This means using the SQL language to crunch data. It is the "closest" to the data. It is designed and optimised for dealing with data. Do your data processing using SQL.
Minimize PL/SQL. This means using the PL language not to crunch data, but to provide the conditional logic. Implement business rules. And then have the SQL language crunch the data as the data processing language.
Attempting to directly translate T-SQL code into PL/SQL is flawed. It is like trying to make coffee with teabags. Yeah, the tea may have caffeine it, but it is not coffee.
To do what that T-SQL script does, insert a row into a table, a typical PL/SQL equivalent will look as follows:
create or replace procedure InsertMaster( masterRow master%rowtype ) authid definer is
.. types and variables declared here
begin
-- masterRow is a record structure that matches the actual MASTER table
.. apply business rules and validation to the data.. raising user exceptions as needed
-- e.g. the POSITION column must be upper case
masterRow.position := upper(masterRow.position);
-- after the business logic and data validation we can add the row to the table
-- (PL will make the INSERT call to the SQL engine)
insert into master values masterRow;
end;No commit. The caller does the business transaction. It needs to decide when to commit to maintain the integrity of the data in the database. It may need to do several more calls, before committing.
With this approach, we can give the application schema (the caller) execute privs on this procedure. This procedure is defined with definer rights. This means it runs with the privs of owner of that procedure and MASTER table. It is trusted code. It does all the correct stuff to add a valid and checked row to the MASTER table. So we give the app schema execute privs on the procedure and no insert priv on the MASTER table.
The only way the caller can add row to the MASTER table is via this trusted procedure of ours.
And this is a typical approach in Oracle - using the PL/SQL (both PL language and SQL language) code to create an interface to a logical database in Oracle. Abstracting the complexities of SQL from the caller. Moving business and validation into PL. Allowing us the flexibility of modifying business and validation logic, without touching a single byte of caller/client code. Allowing us to manage and tune SQL performance without dealing with (badly designed and coded) SQL from a client - as the SQL resides in PL/SQL packages and procedures and functions.

How to run a SQL Server Stored Procedure

I need to run a SQL Server Stored Procedure in answer, the stored procedure use a hash table (temporary table) and I nedd to pass a parameter to stored procedure
anyone know if is it possible in OBIEE, if yes how.
thank you
max

thank you, but I'm not understand what you mean. I need to run this command in answer "direct access database"
exec storedprocedure 1,1,1
if I run this I receive thi error:
error : [nQSError: 16001] ODBC error state: S0002 code: 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server]object name '#TempList' not valid.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000).
here is the code of stored procedure:
ROC [dbo].[GetOrderListmax]
@OrderList varchar(500)
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #TempList
OrderID int
DECLARE @OrderID varchar(10), @Pos int
SET @OrderList = LTRIM(RTRIM(@OrderList))+ ','
SET @Pos = CHARINDEX(',', @OrderList, 1)
IF REPLACE(@OrderList, ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @OrderID = LTRIM(RTRIM(LEFT(@OrderList, @Pos - 1)))
IF @OrderID <> ''
BEGIN
INSERT INTO #TempList (OrderID) VALUES (CAST(@OrderID AS int)) --Use Appropriate conversion
END
SET @OrderList = RIGHT(@OrderList, LEN(@OrderList) - @Pos)
SET @Pos = CHARINDEX(',', @OrderList, 1)
END
END
SELECT o.OrderID, CustomerID, EmployeeID, OrderDate
FROM dbo.Orders AS o
JOIN
#TempList t
ON o.OrderID = t.OrderID
END

SQL Server Stored Procedures

Is there a way of firing up SQL Server stroed procedures from
Flash 8?
If so could someone explain how to do it please, as I would
like to pass parameters from choices made via drop down lists
(populated from xml pages) to query a SQL Server 2000 database.
Any help appreciated.
Thanks

Yes, I understand. But Flash doesn't talk directly to your
SQL API.
The SQL interface is only available through ASP (in your
case, or any number of server-side technologies). That's why you
use getUrl() (or other http request) to send data to an ASP script
which then executes the SQL statement 'execute <blah>
<blah> <blah>'.
You then take the results of that SQL, format it, and return
something to Flash all as part of the one and only HTTP request.
Does this make sense?

Calling Managed CLR Stored Procedure from C++ SQL Server 2008 fails with Msg 2809

I am trying to call a stored procedure from C++ (VS 2010).
Here is what the stored procedure looks like:
public class Validate
[Microsoft.SqlServer.Server.SqlProcedure(Name = "ClientTest")]
public static void ClientTest(out String res )
{ res = "50";}
To create a stored procedure I deploy at first the assembly
USE [test]
GO
CREATE ASSEMBLY ClientTestAssembly
AUTHORIZATION testLogin
FROM 'C:\Users\test\Documents\Visual Studio 2010\Projects\TestCreationAssemblyCSharp\TestCreationAssemblyCSharp\bin\x64\Debug\TestCreationAssemblyCSharp.dll'
and call
USE test
GO
CREATE PROCEDURE ClientTest (@res NVARCHAR(40) OUTPUT)
AS
EXTERNAL NAME ClientTestAssembly.Validate.ClientTest
I can call my procedure direct in SQL Server Management Studio without any errors
declare @res nvarchar(10)
execute ClientTest @res OUTPUT
print @res
But when I try to call this procedure from C++ using CALL syntax
SQLBindParameter(sqlstatementhandle, 1, SQL_PARAM_OUTPUT, SQL_C_CHAR,
SQL_VARCHAR , 40, 0, version, sizeof(version) ,
&pcbValue);
res = SQLExecDirect(sqlstatementhandle, (SQLCHAR*)("{CALL ClientTest(?) }"), SQL_NTS);
I get the Error 2809 with SQLSTATE 42000 and with statement
The request for 'ClientTest'
(procedure) failed because 'ClientTest' is a procedure object.
However, if I wrap my CLR stored procedure into a T-SQL stored procedure, like
CREATE PROCEDURE myProc (@res NVARCHAR(40) OUTPUT)
AS
EXEC ClientTest @res OUTPUT
and call then myProc instead of ClientTest
res = SQLExecDirect(sqlstatementhandle, (SQLCHAR*)("{CALL myProc(?) }"), SQL_NTS);
everithing works fine and I get 50 as result.
I have no ideas what is the reason for that behavior.
Thanks very much for any suggestion.
Christina

I'm not an ODBC expert, but you might try following the sample here:
Process Return Codes and Output Parameters (ODBC)
To see if it also behaves differently for your CLR proc.
David
David http://blogs.msdn.com/b/dbrowne/

How to call PL-SQL script/stored procedure from Java?

Assume I want to call a PL-SQL stored procedure from external Java program.
How can I do this?
Is there a simple "Hello world" example for this?
Peter

This forum is for Oracle only not for java
Ug

Error while invoking stored procedure from BPEL process

Hi Folks,
I am facing the below mentioned issue while invoking a stored procedure in BPEL process :
I am trying to invoke a stored procedure from a BPEL process. The process runs fine for the first/second time, but gives the below error after that whenever i try to run the process :
file:/oracle/orasoa/bpel/domains/default/tmp/.bpel_ProvisionOrderASAPReqABCSImpl_1.0_50dd1595129e9bbb00560e31e7c18cef.tmp/DB_CALL_GetPendingSubscriptionProc.wsdl [ DB_CALL_GetPendingSubscriptionProc_ptt::DB_CALL_GetPendingSubscriptionProc(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'DB_CALL_GetPendingSubscriptionProc' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the PROC_GET_PENDING_SUBSCR API. Cause: java.sql.SQLException: Io exception: Connection reset [Caused by: Io exception: Connection reset]
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the PROC_GET_PENDING_SUBSCR API. Cause: java.sql.SQLException: Io exception: Connection reset [Caused by: Io exception: Connection reset]
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
I am not getting how the BPEL is referring to the DB wsdl from the tmp folder. To resolve this issue, we have to stop the SOA server, delete the tmp files, and restart the server.
Any pointers in this regard will be really helpful.

First of all does this scenario occur again.
"Works first/second time. Later gives this error."
After you restart the SOA server are you able to reproduce this scenario?
As already pointed out and from the error message, database connection is reset.
If you find this error again, try this out.
em -> home / oc4j_soa -> Administration -> JDBC Resources
Use the "Test Connection" option for the Connection Pool that you are using for your database JNDI.
It comes back and say "Connection to "XYZCP" established successfully." it is good to use.
Run the BPEL process again and once you find the error, come back and test the connection.
If it comes back with Error, diagnose based on the error message received.
Cheers
Kalidass Mookkaiah
http://oraclebpelindepth.blogspot.com/

Getting exception whil calling an oracle stored procedure from java program

Dear All,
I encounter this error in my application when I call only the stored procedure but the view is executing fine from the application and my environment is as follow:
Java 1.4
oracle 10g
oracle jdbc driver:9.2.0.8.0
websphere portal 6.0.0.1
this error is occur from time to time randomly, when it happens, the only workaround is to restart the server..Does anyone have any idea about this error?
Unable to execute stored Procedure in Method
java.lang.NullPointerException
at oracle.jdbc.driver.T4C8Oall.getNumRows(T4C8Oall.java(Compiled Code))
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1140)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java(Compiled Code))
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java(Compiled Code))
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3606)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:5267)
at com.ibm.ws.rsadapter.jdbc.WSJdbcPreparedStatement.pmiExecute(WSJdbcPreparedStatement.java:632)
at com.ibm.ws.rsadapter.jdbc.WSJdbcPreparedStatement.execute(WSJdbcPreparedStatement.java:427)
And sometime I am getting this exception
Unable to execute stored Procedure in Method
java.lang.ArrayIndexOutOfBoundsException: 27787320
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java(Compiled Code))
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1134)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java(Compiled Code))
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java(Compiled Code))
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3606)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:5267)
at com.ibm.ws.rsadapter.jdbc.WSJdbcPreparedStatement.pmiExecute(WSJdbcPreparedStatement.java:632)
at com.ibm.ws.rsadapter.jdbc.WSJdbcPreparedStatement.execute(WSJdbcPreparedStatement.java:427)
Thanks
Jay

spacetorrent escribió:
for (int x=0; x <result.size(); x++){
System.out.println(result.get(x));
I can't do this, because result object is a Map, and I need write the Key of the Value to obtain.
So I can do:
result.get("res");And I odtain a *$Proxy3* Object

How to convert SQL server stored procedures to Oracle 11g

Hi Experts,
In SQL server 30 stored procedures are there how to convert all the stored procedure
from SQL server to Oracle 11g.
Please help me,
Thanks.

ramya_162 wrote:
In SQL server 30 stored procedures are there how to convert all the stored procedure
from SQL server to Oracle 11g.
The single most fundamental concept you need to understand (grok in its fullness) is:
ORACLE IS NOT SQL-SERVER
There is very little, to NOTHING, in common between T-SQL (a language extension to SQL) and PL/SQL (integration of SQL with the language Ada, part of ALGOL family of languages that includes Pascal and C++).
So taking a T-SQL procedure and porting it as is to PL/SQL is plain stupid.
Why?
Oracle sucks at trying to be SQL-Server.
So how do you migrate from SQL-Server to Oracle?
By taking the REQUIREMENTS that the T-SQL procedures address, and addressing these requirements using Oracle SQL and PL/SQL.

Call SQL Server Stored Procedure from BPEL

Similar Messages

Maybe you are looking for