Call static method of Acrobat from C#

I have a C++ static function and I want to invoke that function from C# code (it's a button_click event). I tried to export that function by creating it's DLL, but it doesn't work out. My C++ function looks like this: static ACCB1 void ACCB2 HighlightWord(void *data). Please provide some pointers?

Thanks for the reply. yes, this code is in Plug-In (C++). But can you please let me know the way or reference to use is in C# (if any), that would be great!
I tried by creating DLL and tried to expose this function (static ACCB1 void ACCB2 HighlightWord(void *data)) but couldn't succeed. Please let me know.
Or is there any sample available in Acrobat SDK, then please let me know its place, I can check that one as well.
Thanks in advance!

Similar Messages

Export Internal table by calling static method

Hi friends,
Can u please tell me how to get internal table in export parameter by calling static method.
OR can u tell me how to declare internal table in method parameter.
Thanks in advance

Raja's method will work for all tables irrespective of the structure and is the best possible approach. However, if your requirement is simple and you do not have to deal with a lot many tables,
1. Create a Type-Pool, suppose ztypl
2. Within the type pool, declare a Structure type,
TYPES: BEGIN OF ztypl_struct1,
         "Place your fields here
       END OF ztypl_strict1,
       "Create a table of type ztypl_struct1 here
       ztypl_table1 TYPE TABLE OF ztypl_struct1.
Use "ZTYPL_TABLE1" as the "Associated type" in your method's Parameter definition in SE24.
eg.
IT_TABLE      TYPE     ZTYPL_TABLE1
If you are writing your class in an include,
    METHODS my_method1
      IMPORTING
        it_table1   TYPE ztypl_table1.
Do remember to include
TYPE-POOLS: ztypl.
in your class's Constructor / Include program.
Please award points if helpful.
Regards,
Ryan
Message was edited by:
        Ryan Cannel

JUNIT : how to call static methods through mock objects.

Hi,
I am writing unit test cases for an action class. The method which i want to test calls one static method of a helper class. Though I create mock of that helper class, but I am not able to call the static methods through the mock object as the methods are static. So the control of my test case goes to that static method and again that static method calls two or more different static methods. So by this I am testing the entire flow instead of testing the unit of code of the action class. So it can't be called as unit test ?
Can any one suggest me that how can I call static methods through mock objects.

The OP's problem is that the object under test calls a static method of a helper class, for which he wants to provide a mock class
Hence, he must break the code under test to call the mock class instead of the regular helper class (because static methods are not polymorphic)
that wouldn't have happened if this helper class had been coded to interfaces rather than static methods
instead of :
public class Helper() {
    public static void getSomeHelp();
public class MockHelper() {
    public static void getSomeHelp();
}do :
public class ClassUnderTest {
    private Helper helper;
    public void methodUnderTest() { // unchanged
        helper.getSomeHelp();
public interface Helper {
    public void getSomeHelp();
public class HelperImpl implements Helper {
    public void getSomeHelp() {
        // actual implementation
public class MockHelper implements Helper {
    public void getSomeHelp() {
        // mock implementation
}

Compilation error while calling static method from another class

Hi,
I am new to Java Programming. I have written two class files Dummy1 and Dummy2.java in the same package Test.
In Dummy1.java I have declared a static final variable and a static method as you can see it below.
package Test;
import java.io.*;
public class Dummy1
public static final int var1= 10;
public static int varDisp(int var2)
return(var1+var2);
This is program is compiling fine.
I have called the static method varDisp from the class Dummy2 and it is as follows
package Test;
import java.io.*;
public class Dummy2
public int var3=15;
public int test=0;
test+=Dummy1.varDisp(var3);
and when i compile Dummy2.java, there is a compilation error <identifier > expected.
Please help me in this program.

public class Dummy2
public int var3=15;
public int test=0;
test+=Dummy1.varDisp(var3);
}test+=Dummy1.varDisplay(var3);
must be in a method, it cannot just be out somewhere in the class!

Call static method from jsp expression

Hi, I'm using adf/bc 10.1.3.4 I'm wanting to call a static method of a class when an af:commandLink is clicked. This action attribute value for this af:commandLink would be an el expression. As an example, let's say I want to call a new static method, named test(), I've added to ADFUtils.
My af:commandLink looks like this:
<af:commandLink action="#{ADFUtils.test}" />
Obviously, this doesn't work. I can describe my actual use case if it would help. For now I'll just say that I don't want to use a managed/backing bean to house this method. How can I create a class to house this method w/o using a managed bean and adding that managed bean reference to the faces-config.xml?? Thanks, James

thanks for the interest john. i'll explain what it is i'm trying to do. I have two web applications, appA and appB, both running in the same app server instance. The apps are related in the sense that once the user logs in thru an sso mechanism, they can 'bounce' back and forth between applications. Not sure if that info is relevant, but I wanted to include it anyhow.
We've created a common banner/header jsp that we include in every page of appA and appB. Included in that header jsp is a logout link (af:commandLink), which will need to execute some code when clicked. Here is where the dilemma starts. We don't really want to have to write the code for the logout in a managed/backing bean because although both applications can use that same bean (we have it set up in the repository so that when a checkout/update is done on either appA or appB, each app, utilizing an svn external rule, would get both the banner jsp and the logout code that goes with it), making good use of the reusability concept, we would also have to add a reference to that backing/managed bean in the faces-config.xml of each application in order for it to be instantiated and used by each app. I was hoping to implement a solution which wouldn't require the developer to have to do any 'setup' on an application by application basis to use the header jsp and the code behind the Logout link. I've described a simple scenario, but in reality we'll have multiple applications, which means multiple places (faces-config.xml) where we'd need to add a reference to the managed bean which contains the logout code. It wouldn't be the end of the world for us if we ended up doing it this way, but I just have a feeling like there may be a better way to implement this so that each application's faces-config doesn't need to be touched. Hope my explanation is clear. thanks for any help you can offer.
Edited by: kcjim on Feb 25, 2009 8:21 AM
Edited by: kcjim on Feb 25, 2009 8:22 AM

Calling a method in acrobat plugin as COM obj method

Hi all,
I want to call a method from my acrobat plugin as a COM objects method. Can i import i.e. add reference of plugin and call the perticular method which accepts two PDDoc parameters. For this I can use any platform (JS, C#, VB.net or anything). Please help me out.

Consider I have exported the below plugin method via COM as Irosenth mentioned above, will I be able to see the highlighting happening visually in the PDF document which is currently active when I call this COM method from my C# Winform application?
Also consider I have the Adobe Reader plugin license, will this functionality work in Reader?
static ACCB1 void ACCB2 HighlightWord(void *data)
    DURING
    //Create a HiliteEntry object and set its attributes
    HiliteEntry hilite;
    hilite.offset = 3;
    hilite.length = 1;
     //Get the page number of the current page view
    AVDoc currentAVDoc = AVAppGetActiveDoc();
    PDDoc currentPDDoc = AVDocGetPDDoc(currentAVDoc);
    AVPageView currentPageView = AVDocGetPageView(currentAVDoc);
    ASInt32 pageNum = AVPageViewGetPageNum(currentPageView);
    //Highlight the tenth word
    PDPage pdPage = PDDocAcquirePage (currentPDDoc, pageNum);
    PDTextSelect textSelection = PDTextSelectCreateWordHilite(pdPage, &hilite, 1);
    AVDocSetSelection(currentAVDoc, ASAtomFromString("Text"), (void *)textSelection, true);
    AVDocShowSelection (currentAVDoc);
    PDPageRelease (pdPage);
    HANDLER
        AVAlertNote("Error highlighting word");
    END_HANDLER

Calling a method in view from component controller?

Hi,
Is it posible to call a method that is defined in the Component Controller in the View?
If it is posible please give some sample code how to call the method?
Regards,
Padmalatha.K

Padmalatha, all the methods defined in a controller from 'Methods' tab are instance methods. An instance method defined in a component controller is callable from any view controller that holds a reference to the component controller.
Defining methods between the tags
//@@begin others
//@@end
is useful if you want to declare static methods.

Help on calling static method in a multithreaded environment

Hi,
I have a basic question.. pls help and it is urgent.. plss
I have a class with a static method which does nothing other than just writing the message passed to a file. Now i have to call this static method from many threads..
What actually happens ???
Does all the thread start to execute the static method or one method executes while the other threads wait for the current thread to complete execution?. I am not talking about synchronizing the threads...my question is what happens when multiple threads call a static method??
Pls reply.. I need to design my project accordingly..
Thanks
Rajeev

HI Omar,
My doubt is just this..
I wanted to know what might happen if two threads try to access a static method.. Logically only one thread can use the method since it is only only copy... but i was wondering what might happens if f threads try to access the same static method.. My Situation is this.. I have a cache which is just a hash table which will be only one copy for the whole application.. No when i get a request I have to check if the id is avaible in the cache. if it is available i call method 1 if not i call method2. Now Ideally the cache should be a static object and the method to check the id in the cache will be a normal instance method..
I was just wondering what might happen if i make the method static.. If i can make it static i can can save a lot of space by not creating the object each time.. u know what i mean.. That y i wanted to know what happens..
Rajeev

Calling a method in Class from webdynpro

Hi All,
I have to perform some action when i click the button created in my webdynpro screen.
However I must not write the code for the button action inside the button event. But I have to create a class and inside the class i have to create the method for this button event.
Can anyone tell me how to call a method in a class created in SE24 from webdynpro on clicking the button.
Thanks in advance.

hi..
When you want to perform some action after clicking a Button, then you have to write the code only in 'Events' - 'On Action' event. From your question, i assume that, you wanna use Assistance class in your webdynpro so as to increase better performance. Here is the link which will guide yuo with screen shot for using assistance class in WD-ABAP.
http://wiki.sdn.sap.com/wiki/display/WDABAP/AssistanceclassfunctionalityinWDA
thanks,
Padma

How to call a method in bean from application module Impl?

i have to call a method which is in a bean from AppmoduleImpl class. Is it possible ?

The model layer should never depend on a specific view layer - this breaks reusability.
What you need to do is expose a service method on your AM. Then your view can call this method and pass a parameter into the model layer.

How to call a method in Viewimpl from transient attributes value

Hai,
I have a method in ViewImpl say validate().I need to call this method from an transient attributes value where value type is expression.i used adf.object.validate() but its not working.
Can any one help me
Thanks in advance

Hai,
Jabr i read these in a pdf where it explains about Introduction to Groovy support in JDeveloper and Oracle ADF 11g
Referencing custom methods in the EntityImpl class
If you have defined a method in your EntityImpl class, then this can be called as part of your
expression for an attribute default:
adf.object.getDefaultSalaryForGrade()
Unlike when referencing an attribute of the entity object, which can be done by simply
referencing the attribute name, when referencing a method, you are required to prefix the
method name with adf.object.
So is there a way?
regards

SQL Call - Static Method

Hello All:
I am trying to run a sample code from the Oracle8i doc 'Hello
World'. The program compiled and used 'loadjava' to load to the
database.
When I tried to create SQL Call Function from SQL*Plus, I am
getting the error:
PLS-00103: Encountered the symbol "MYSTRING"
This is the sample code trying to run from SQL*Plus:
create or replace function HELLOWORLD return VARCHAR2 as
language java name 'Hello.world() return java.lang.String';
myString varchar2;
call HELLOWORLD() into :myString;
print myString;
Any help is appreciated.
Thanks,
Krishna.
null

Technically, you cannot call a method in the background mode, however you can call its content in the background, just transfer the content of the method to a parameterised report-type program and use SUBMIT VIA JOB statement.
class=>run_in_background( parameters ... ).
METHOD run_in_background.
SUBMIT zrun_in_background ... VIA JOB...
ENDMETHOD.

Reflection: how to call static method?

You can call an instance method for an object via
Method method = myClass.getDeclaredMethod(mName, mTypes);
Object value = method.invoke(instance, mValues);But how do you call a static method (that is perhaps in an abstract class)? Is it save to have the instance variable null?

Is it save [sic] to have the instance variablenull?Please refrain to mock at that, Peter. Even the
English often confuse "loose" and "lose", don't be
that critical to foreigners. :-)Is there something wrong? I just serach via google:
"is it save to" ... results: 800 ...
Okay, "is it safe to" : 636.000 ... :-)

Difference between calling static method and not static method?

Hi,
Suppose i want to write a util method, and many class might call this method. what is better? writing the method as static method or not static method. what is the difference. what is the advantace in what case?

writing the method as static method or not static
method. what is the difference.The difference is the one between static and non-static. Any tutorial or the JLs will clarify the difference, no need to repeat it here.
what is the advantace in what case?It's usually not like you have much of a choice. If you need access to an instance's attributes, you can't make it static. Otherwise, make it static.

Calling a Method in Bean from JSP

Is there a defined jsp tag for calling a method in a Bean? Right now, in a bean named "bean", I would use: <% bean.doSomething(); %>. Is there a tag for this?

I've wondered this too, the getProperty and setProperty tags only allow you call setters and getters. What if you've got a method called doSomething()?

Call static method of Acrobat from C#

Similar Messages

Maybe you are looking for