Call stored procedure with a few unusal conditions
What is the best way for a stored procedure that has been passed an unknown number of parameters to call another stored procedure, (whose name is passed in as a parameter to procedure1), that returns a ref cursor or a dbms_sql cursor.
For example:
Procedure1 - passed unknown # of parameters in an array/table calls stored procedure2 that returns a ref cursor that you eventually want to pass all the way back down to the client.
I am using Oracle 11g.
1). I have gotten this to work using derivedparameters in .net - but this is considered bad practice due to the overhead, etc...
2). I have gotten this to work using execute immediate and bind variables.
EXECUTE IMMEDIATE v_sqlstmt using p_strarry(1), p_strarry(2), p_strarry(3), p_strarry(4), p_strarry(5), p_rc;
The problem with this technique is that you need to create a case statement that will use a different execute immediate statement for each arraycnt, since the using clause cannot be created dynamically. Also, considered bad. If I increase the number of elements in the array beyond what I have coded for then I need to add more when clauses to my case statement.
3). I have gotten this to work with execute immediate that contains no binding variables - but my understanding is that this causes the shared pool to populate and causes the server to have to be flushed, periodically.
4). I have read that with an unknown number of bind variables you need to use dbms_sql - I have been unable to find any reference as to a way I can return a ref cursor to the dbms_sql.cursor in a list of bind variables or a dbms_sql.cursor that returns multiple rows from a table to the original dbms_sql_cursor.
In case what I have said is not specific enough - a code snipplet from the execute immediate using bind variables, (1 above).:
PROCEDURE eiroutebvsproc(p_sprocname in varchar2,
p_strarry in StrArry,
p_rc IN OUT SYS_REFCURSOR)
IS
v_sqlstmt varchar2(300);
v_arrycnt int;
BEGIN
v_sqlstmt := 'begin ';
v_arrycnt := p_strarry.count;
CASE
WHEN (v_arrycnt = 1)
THEN v_sqlstmt := '';
WHEN (v_arrycnt = 2)
THEN v_sqlstmt := '';
WHEN (v_arrycnt = 3)
THEN v_sqlstmt := '';
WHEN (v_arrycnt = 4)
THEN v_sqlstmt := '';
WHEN (v_arrycnt = 5)
THEN v_sqlstmt := v_sqlstmt || p_sprocname || '(:2, :3, :4, :5, :6, :7);';
v_sqlstmt := v_sqlstmt || ' end;';
EXECUTE IMMEDIATE v_sqlstmt using p_strarry(1), p_strarry(2), p_strarry(3), p_strarry(4), p_strarry(5), p_rc;
ELSE v_sqlstmt :='ERROR';
END CASE;
this creates an anonymous block - that calls the 2nd procedure - The 2nd procedure name is passed into procedure1 as p_sprocname.
p_strarry contains an unknown # of parameters to be passed to the 2nd procedure. The 2nd procedure returns a ref cursor that is also an out parameter for procedure1 allowing for the ref cursor to be passed all the way back to the client.
Thank You,
Keith
user10651723 wrote:
What is the best way for a stored procedure that has been passed an unknown number of parameters to call another stored procedure, (whose name is passed in as a parameter to procedure1), that returns a ref cursor or a dbms_sql cursor.There would be no good way to do that, like there is no real good way to bang your head against a brick wall.
If the application can tell the first procedure than name of the procedure to call, why can it not just call the required procedure instead?
Similar Messages
-
How to call stored procedure with multiple parameters in an HTML expression
Hi, Guys:
Can you show me an example to call stored procedure with multiple parameters in an HTML expression? I need to rewrite a procedure to display multiple pictures of one person stored in database by clicking button.
The orginal HTML expression is :
<img src="#OWNER#.dl_sor_image?p_offender_id=#OFFENDER_ID#" width="75" height="75">which calls a procedure as:
procedure dl_sor_image (p_offender_id IN NUMBER)now I rewrite it as:
PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number)could anyone tell me the format for the html expression to pass multiple parameters?
Thanks a lot.
SamHi:
Thanks for your help! Your question is what I am trying hard now. Current procedure can only display one picture per person, however, I am supposed to write a new procedure which displays multiple pictures for one person. When user click a button on report, APEX should call this procedure and returns next picture of the same person. The table is SOR_image. However, I rewrite the HTML expression as follows to test to display the second image.
<img src="#OWNER#.Sor_Display_Current_Image?p_n_Offender_id=#OFFENDER_ID#&p_n_image_Count=2" width="75" height="75"> The procedure code is complied OK as follows:
create or replace
PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number) AS
v_mime_type VARCHAR2(48);
v_length NUMBER;
v_name VARCHAR2(2000);
v_image BLOB;
v_counter number:=0;
cursor cur_All_Images_of_Offender is
SELECT 'IMAGE/JPEG' mime_type, dbms_lob.getlength(image) as image_length, image
FROM sor_image
WHERE offender_id = p_n_Offender_id;
rec_Image_of_Offender cur_All_Images_of_Offender%ROWTYPE;
BEGIN
open cur_All_Images_of_Offender;
loop
fetch cur_All_Images_of_Offender into rec_Image_of_Offender;
v_counter:=v_counter+1;
if (v_counter=p_n_image_Count) then
owa_util.mime_header(nvl(rec_Image_of_Offender.mime_type, 'application/octet'), FALSE);
htp.p('Content-length: '||rec_Image_of_Offender.image_length);
owa_util.http_header_close;
wpg_docload.download_file (rec_Image_of_Offender.image);
end if;
exit when ((cur_All_Images_of_Offender%NOTFOUND) or (v_counter>=p_n_image_Count));
end loop;
close cur_All_Images_of_Offender;
END Sor_Display_Current_Image; The procedure just open a cursor to fetch the images belong to the same person, and use wpg_docload.download_file function to display the image specified. But it never works. It is strange because even I use exactly same code as before but change procedure name, Oracle APEX cannot display an image. Is this due to anything such as make file configuration in APEX?
Thanks
Sam -
Calling Stored Procedure with TestStand to SQL 2000
When I run the Stored Procedure in the query analyzer it returns the recordset fine. I am not specifying any parameters. I am Using TestStand 2.01 and SQL Server 2000. I am using the OPEN SQL STATEMENT step to call the SP. When I run the SP in TestStand I get no data returned. If I run the SQL statment in TestStand I get the data that I am requesting. Does TestStand not support stored procedures.
Hi,
The instructions that I posted were for TestStand 3.0. In version 3.0 you can call stored procedures with input/output paramateres and to support this functionality the data operation step support several new modes.
TestStand 2.0.1 does not support parameters on stored procedures, but it does support calling stored procedures that do not take parameters. To be able to access the data back from the database you need to set the cursor location (in the Advanced tab of the Open SQL Statement step) to Client (http://digital.ni.com/public.nsf/websearch/0EF68BF97AB1A61F86256B8E007D70C0?OpenDocument).
By changing the cursor to Client I was able to succesfully call a stored procedure from TestStand 2.0.1 and to read back the recordse
t return by the database. Please let me know if you are still experiencing dificulties.
Best regards,
Alejandro del Castillo
National Instruments -
Database Adapter calling stored procedure with xmlDOM.DOMNODE input problem
Hi all,
I have been asked to do a POC on using SOA suite to generate a web-service for several database stored procedure. A few of them can be done without a fuss. But I am now stuck with a stored procedure that has input and output as xmlDOM.DOMNODE type.
The stored procedure is very simple as below:
procedure prc_accinquiry(request in xmlDOM.DOMNODE, response out xmlDOM.DOMNODE) is
begin
response := request;
end prc_accinquiry;
I get the following error
Error while writing wsdl file C:/JDeveloper/mywork/ABSPOC/NetBanking/DomNodeTestDB.wsdl. Exception: WSDLException: faultCode=OTHER_ERROR: The wrapper procedure, PACK_TESTING$PRC_ACCINQUIRY, could not be found in the package, BPEL_DOMNODETESTDB, for the schema, MBTT
Did I do something wrong? or DOMNODE is not part of supported datatype for DB Adapter stored procedure call from JDeveloper?
The environment is SOA suite 11g 11.1.1.5 with Database 11 XE
Thank you in advance,
Jomphop
Edited by: e-Teoy on 15/12/2011 19:49This problem can be resolved by granting execute permission on the object type to the caller. For example, if the stored procedure is in schema1 and the object type is in schema2 then you would connect as schema2 and execute
SQL> grant execute on <object type> to schema1
Referencing object types defined in other schemas is documented. This is the described method for accessing object types in other schemas. -
Calling stored procedures with parameters with the Database Connectivi​ty Toolkit
Hi all,
I am new to the forum and am having difficulty finding a solution to a particular problem I am having regarding using the LabVIEW Database Connectivity Toolkit on a project I am currently working on at my job. I have a database in which I have tables and stored procedures with parameters. Some of these stored procedures have input, output, and return parameters.
I have been trying to follow this example but to no avail: http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4?OpenDocument
One such stored procedure I am working on implementing is named "dbo.getAllowablePNs", which executes "SELECT * from DeviceType" (DeviceType is the table). In this case, it does not require an input parameter, it has an output parameter that generates the table [cluster], and has a return parameter which returns an integer value (execution status code) to show if an error occurred. The DeviceType table has 3 columns; ID (PK, int, not null), PN (nvarchar(15), null), and NumMACAddresses (int, null). I have gone over many examples and have talking to NI support to try to implement this and similar stored procedures in LabVIEW but have not been successful. I am able to connect to the database with the Open Connection VI without error, but am running into some confusion following this step. I am then trying to use the Create Parameterized Query VI to call the stored procedure and set the parameters. I assume I would then use the Set Parameter Value VI for each parameter that is wired into the parameters input on the previous Parameterized Query VI? I am also having some confusion during and following these steps as well. I would greatly appreciate any advice or suggestions anyone might have in regards to this situation as I am not a SQL expert. Also, I would be happy to provide any more information that would be helpful.
Regards,
Jon
Solved!
Go to Solution.Also, I don't know if this would be helpful but here is the actual stored procedure in SQL:
CREATEPROCEDURE [dbo].[getLastSequenceNumber]
@p1 nvarchar(10)='WO-00000'
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SETNOCOUNTON;
-- Insert statements for procedure here
selectmax(SequenceNumber)from Devices where WorkOrderNumber= @p1
END
GO -
Call stored procedure with OUT parameter
Hello,
I have created a short-lived process. Within this process I am using the "FOUNDATION > JDBC > Call Stored Procedure" operation to call an Oracle procedure. This procedure has 3 parameters, 2 IN and 1 OUT parameter.
The procedure is being executed correctly. Both IN parameters receive the correct values but I am unable to get the OUT parameter's value in my process.
Rewriting the procedure as a function gives me an ORA-01460 since one of the parameters contains XML (>32K) so this is not option...
Has someone been able to call a stored procedure with an OUT parameter?
Regards,
NicoObject is Foundation, Execute Script
This is for a query, you can change to a stored procedure call. Pull the value back in the Java code then put into the process variable.
import javax.naming.InitialContext;
import javax.sql.DataSource;
import java.sql.*;
PreparedStatement stmt = null;
Connection conn = null;
ResultSet rs = null;
try {
InitialContext ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("java:IDP_DS");
conn = ds.getConnection();
stmt = conn.prepareStatement("select FUBAR from TB_PT_FUBAR where PROCESS_INSTANCE_ID=?");
stmt.setLong(1, patExecContext.getProcessDataLongValue("/process_data/@inputID"));
rs = stmt.executeQuery();
rs.next();
patExecContext.setProcessDataStringValue("/process_data/outData", rs.getString(1));
} finally {
try {
rs.close();
} catch (Exception rse) {}
try {
stmt.close();
} catch (Exception sse) {}
try {
conn.close();
} catch (Exception cse) {} -
Calling stored procedure with output parameters in a different schema
I have a simple stored procedure with two parameters:
PROCEDURE Test1(
pOutRecords OUT tCursorRef,
pIdNumber IN NUMBER);
where tCursorRef is REF CURSOR.
(This procedure is part of a package with REF CURSOR declared in there)
And I have two database schemas: AppOwner and AppUser.
The above stored procedure is owned by AppOwner, but I have to execute this stored procedure from AppUser schema. I have created a private synonym and granted the neccessary privileges for AppUser schema to execute the package in the AppUser schema.
When I ran the above procedure from VB using ADO and OraOLEDB.Oracle.1 driver, I got the following error when connecting to the AppUser schema:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'TEST1'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
but when I was connecting to the AppOwner schema, everything is running correctly without errors.
Also, when I switch to the microsoft MSDAORA.1 driver, I can execute the above procedure without any problems even when connecting to the AppUser schema.
I got this error only when I am trying to execute a stored procedure with an output parameter. All other procedures with only input parameters have no problems at all.
Do you know the reason for that? Thanks!If anyone has figured this one out let me know. I'm getting the same problem. Only in my case I've tried both the "OraOLEDB.Oracle" provider and the "MSDAORA" provider and I get an error either way. Also my procedure has 2 in parameters and 1 out parameter. At least now I know I'm not the only one with this issue. :)
'*** the Oracle procedure ***
Create sp_getconfiguration(mygroup in varchar2, myparameter in varchar2, myvalue out varchar2)
AS
rec_config tblconfiguration.configvalue%type;
cursor cur_config is select configvalue from tblconfiguration where configgroup = mygroup and configparameter = myparameter;
begin
open cur_config;
fetch cur_config into rec_config;
close cur_config;
myvalue := rec_config;
end;
'** the ado code ****
dim dbconn as new adodb.connection
dim oCmd as new adodb.connection
dim ors as new adodb.recordset
dbconn.provider = "MSDAORA" 'or dbconn.provider = "OraOLEDB.Oracle"
dbconn.open "Data Source=dahdah;User ID=didi;Password=humdy;PLSQLRSet=1;"
set ocmd.activeconnection = dbconn
cmd.commandtext = "{call fogle.sp_getconfiguration(?,?)}"
'i've also tried creating a public synonym called getconfiguration and just refering to procedure by that.
' "{call getconfiguration(?, ?)}"
' "{call getconfiguration(?,?, {resultset 1, myvalue})}"
'and numerous numerous other combinations
set oPrm = cmd.createparameter("MYGROUP", advarchar, adparaminput, 50, strGrouptoPassIn$)
cmd.parameters.append oPrm
set oPrm = cmd.createParameter("MYPARAMETER", advarchar, adParamInput, 50, strParameterToPassIn$)
cmdParameters.append oPrm
set rs = cmd.execute -
JDBC-Adapter-Receiver Calling Stored Procedure with Input-Typ Record
Hallo,
I´ m trying calling a stored-procedure with two input-parameter; one of typ record (oracle) and one of type tabel of records. Is this possible (I think there are only types like string, integer etc. possible)? When not is there another possibility to work with that type?
Thanks in advance,
FrankHi Frank,
I think stored procedures will not take Array of Records as a Input. If you want to make a loop funtionality etc then JDBC adapter will work accordingly. You need to just call the stored procedure from the JDBC adapter. It will work for the array of records(multiple occurences).
Receiver JDBC Procedures.
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Alternative option is you can make use of Java Proxy and from there you can call stored procedure ..I think it is possible.. not tried.
Hope this helps
Regards,
Moorthy -
Calling Stored procedure with Parameters in PowerPivot DataModel
Hi All,
I wanted to call a SQL stored procedure from PowerPivot(Excel) on based on changing slicer's value.
Currently, we can call stored procedure wihtout any parameter from Data Model tab using
Exec stored_proc_name in Table Properties window.
What if I want to call the same procedure with a parameter whouse value will come by changing slicer's value. I meant, changing slicer value will act as a parameter to that stored procedure & it should return updated results.
Is this possible in PowerPivot?Hi Rameshwar,
According to your description, you call a SQL Server stored procedure in PowerPivot data model, now the problem is that you need to pass a parameter to the stored procedure, right?
Based on my research, it seems that we cannot achieve this requirement directly in current version of PowerPivot data model. Here is a similar thread for you reference.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/5350228d-bc62-4a3b-a1a6-e847483e2858/powerpivot-for-excel-2013-call-execute-stored-procedure-with-parameters?forum=sqlkjpowerpivotforexcel
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Regards,
Charlie Liao
TechNet Community Support -
Call stored procedure(with parameters) via odbc
In my application I like to use the below statement to call a stored procedure with parameter and return a result set.
{CALL PP.getPerson('daniel')}
but this will just return errors to my application.
If I change the statement to:
{CALL PP.getPerson(?')}
and bind a parameter and its value, it will work.
My question is, is it possible to call a stored procedure via ODBC without binding parameters in application? I mean, what will be my SQL equivalent if I don't want to do parameter binding in my application?
Thanks in advance. I appreciate any help :-)hi
Please see the e.g bellow
create proc proc_test(@SchoolNumber int,@SchoolName
varchar(100),@StudentNumber int, @StudnentName
varchar(100)output ,
@StudentAddress varchar(100) output,
@Studentbirthdate datetime output,
@StudentPhoneNumber varchar(100) output,
@GuardianName varchar(100) output)
as
begin
select @StudnentName varchar=StudnentName ,
@StudentAddress =StudentAddress,
@Studentbirthdate =Studentbirthdate ,
@StudentPhoneNumber =StudentPhoneNumber,
@GuardianName =GuardianName
from table where schoolno=@SchoolNumber
and SchoolName=@SchoolName
and StudentNumber=@StudentNumber
return
end
http://technet.microsoft.com/en-us/library/ms187004(v=sql.105).aspx
http://www.lynda.com/SQL-Server-tutorials/Using-input-output-parameters/104964/113058-4.html
Please mark answered if I've answered your question and vote for it as helpful to help other user's find a solution quicker -
Problem calling stored procedure with user-defined type of input parameters
Hi,
I have to call a stored procedure with IN parameters, but these are user-defined types of input parameters.
function fv_createnews (
pit_groups in T_APPLICATION_USER_GROUPS,
pit_documents in T_DOCUMENTS
return varchar2;
TYPE T_APPLICATION_USER_GROUPS IS
TABLE OF varchar2(500)
INDEX BY binary_integer;
TYPE T_DOCUMENT IS record (
name varchar2(256)
,url varchar2(1024)
,lang varchar2(30)
,foldername varchar2(150)
TYPE T_DOCUMENTS IS
TABLE OF T_DOCUMENT
INDEX BY binary_integer;
How can I do this using the TopLink 10.1.3 API.
I already found following related posts, but I still can' t make it up:
Using VARRAYs as parameters to a Stored Procedure
Pass Object as In/Out Parameter in Stored Procedure
Or do I have to create my own PreparedStatement for this special stored procedure call using Java and Toplink?As the related posts suggest, you will need to use direct JDBC code for this.
Also I'm not sure JDBC supports the RECORD type, so you may need to wrap your stored functions with ones that either flatten the record out, or take OBJECT types. -
Calling Stored Procedure with CLOB parameter
Hi,
i have one procedure with IN parameter CLOB which is taking xml file and stored in one table column and this table column datatype is also CLOB. And this procedure called by .Net program but problem is when the file will come more than 32KB calling procedure failed. But as i know CLOB can stored up to 4GB data.
Is that Limitation of oracle or .Net version
please let me know the solution for that,
Create Procedure Insert_File(P_XMLFILE IN CLOB)
as
begin
insert into instances
values(p_xmlfile);
commit;
end;
regards,
MadanHi Thanks for your reply,
Actually this procedure called by .net program and the XML file has passed in that parameter which come from some FTP(its inbound) and this files we are storing into above mentioned table.
Error has come while calling stored procedure Through .net
Error Details:
Error calling stored procedure. 0 retry attemps has failed. Error: System.Exception: Error while calling stored procedure on Oracle: INSERT_FILE: System.Data.OracleClient.OracleException: ORA-01460: unimplemented or unreasonable conversion requested -
Calling Stored Procedure with OraClob as parameter IN
I am using Visual C++ and using oo4o the ole way
I am try to call stored procedure that have Clob as parameter in
it seems the the OraParameters Add method don't have the ability since it can only receive variantt.
How do I do it
Thanks
Yoavfyi
Related to the solution/workaround posted by Luc.
see "Do Oracle's JDBC drivers support PL/SQL tables/result sets/records/booleans? "
at http://www.oracle.com/technetwork/database/enterprise-edition/jdbc-faq-090281.html#34_05
regards
Jan Vervecken -
Calling Stored Procedure with in Stored Procedure
I have one stored procedure A, I want to call Stored procedure A from Stored Procedure B and want to give input parameter to Stored Procedure A within Stored Procedure B using while loop.
i.e I have one stored procedure A which uses Telephone number as input parameter and pull out data
I want to create one more stored procedure B which will call stored procedure A internally and give telephone number one by one using while loop and push the result in Table C.>
I have one stored procedure A, I want to call Stored procedure A from Stored Procedure B and want to give input parameter to Stored Procedure A within Stored Procedure B using while loop.
i.e I have one stored procedure A which uses Telephone number as input parameter and pull out data
I want to create one more stored procedure B which will call stored procedure A internally and give telephone number one by one using while loop and push the result in Table C.
>
Doesn't sound a good idea in terms of performance or design. OK, what's your query?
The concept is:
create or replace procedure Proc_A (p_phone varchar2)
is
Begin
Insert into Tablec (col1, col2, col3, phone) values (val1, val2, val3, p_phone);
Exception
When no_data_found then
do what...
End;
Create or Replace Procedure Proc_B as
Begin
For i in (select phone_no from customer)
Loop
Proc_A(i.phone_no);
End Loop;
End;
/Once again, I have to say, it's a bad idea. You may well do it within a single procedure or even a single SQL. Tell us your exact requirements and we'll be able to help you
Edited by: user12035575 on Sep 5, 2011 8:26 PM -
Problem to call stored procedure with several IN pars and single REF Cursor
Hi,
Oracle 9.2.0.1
Ole DB Provider I've got with ODP 9.2.0.4
First I try to call packaged procedure with single
REF CURSOR - it works fine(PROCEDURE getDep(dep OUT DEPART.refcur) IS ...).
When I try to call procedure with additional IN parameter, I get an error ORA-01008: not all variables bound.
Packaged procedure: PROCEDURE getDep(dep OUT DEPART.refcur, i1 IN number) IS .... and so on.
Try to call from C#:
cmd.CommandText = "{call depart.getDep(?)}";
OleDbParameter par0 = cmd.CreateParameter();
par0.Value = some value;
par0.DbType = DbType.Int16;
par0.OleDbType = OleDbType.Integer;
par0.Direction = ParameterDirection.Input;
OleDbDataAdapter da = new OleDbDataAdapter(cmd.CommandText,con);
DataSet ds = new DataSet();
da.Fill(ds);
Connection string:
"Provider=OraOLEDB.Oracle;User Id=scott;Password=tiger;Data Source=ora92;OLEDB.NET=true;PLSQLRSet=true"
Please, HELP !
Thanks in advance,
VyacheslavHi,
Are you using OLEDB.NET driver (System.Data.Oledb) or ODP.NET driver (Oracle.DataAccess)?
If you are using ODP.NET, remember that you need to bind the refcursor output variable also (besides the numbder)
Arnold
Maybe you are looking for
-
How do I make tags under image display in a different order in PE 4
I have Photoshop Elements 4 and in the organizer I am dropping tags onto the single photo view. I clicked the single photoview icon at the bottom and have the name associated with the tag displayed. I want the tag sequence to reflect the position of
-
C3180 All in One not printing on photopaper
Whenever I try to print with photopaper it will be fed through but stop as soon as it's about an inch or so in. Jams do occure, but not always, and I'm finding that the printer seems to be having a hard time grabbing the paper in general. BUT, when
-
Opening Excel Workbooks from a WAD
Hello Experts, My company is using a mixture of 3.5 and 7 Queries and Web Templates. I use the 3.5 WAD Role Menu item to give direct access to 3.5 Queries (via the Adhoc Query Browser) and 7.0 Web Templates. However to solve a complex problem I have
-
PI Java VS ABAP Authorizations
Hi, I'm trying to create an authorization profile for individual support teams for integration. Using the authorization object S_XMB_MONI, we are able to restrict the users to display/restart/cancel messages belonging to a specific party/service/inte
-
Reader still cannot save fillable forms
I'm using LiveCycle Designer to create a fillable form that I wish to have sent back to me as a pdf or for the user to save the completed form locally. I have "Enabled Usage Rights in Adobe Reader" under the advanced tab. However, when I send the fil