Call the ECC transcation like sales oredr(va01) in CRM Webui through transc

Hi CRM Experts,
I want call the ECC transcation like sales oredr(va01) in CRM Webui through transcation launcher ?how i can do this ?

Hi Mahadevi
you can find couple of Blogs and wikis on SDN forum for this.
Please go through with below links.
CRM 2007 How to --2 A( Transaction Launcher)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true
Thanks
Chand

Similar Messages

Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEV

Dear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene

The delivery date in Sales Order VA01

Hi,
I am wondering how the sales order process goes in term of business given that I am not an SD person.
Normally, when a customer rep receive a sales order, the customer will request the date in which the goods are require.
Thus, during the sales order creation, the person will key in the material, order quantity, and the delivery date.
Example, customer wants the goods to deliver on Nov 25th 2011
My confusion arise when the ATP check (i.e. the three section proposal date) find out that the goods are only available on December 10th 2011. Thus, the committed schedule line with committed quantity is copied from the ATP proposal screen to the 2nd scheduline line item with delivery date as Dec 10th, and the committed quantity. The following is the VA01 screen
Schedule Line tab of item detail view:
Dely Date -
OrderQty----CommitQty
11.10.2011--3--
0
18.10.2011--0--
3
Sales Order Overview screen:
MaterialOrderQty-itemCat-FirstDate -
Plant
10000----2pcTAN11.10.2011-----AU01
Question.
1 - Do you feedback to the customer saying that the Delivery Date that can reach you is 11.10.2011 or 18.11.2011?
tuff

hi tuffy,
here system will check ATP while sales order and confirm delivery date,if u r making sales order on 11.10.2011 but system will confirm delivery date in schedule line.
u can take ur msg reference where system is taking order on 11.10.2011 and confirm qty for delivery on 18.11.2011 so customer delivery date would be 18.10.2011.
Edited by: KHAPREVIPIN on Oct 25, 2011 12:38 AM

How to get the mode (change/display/create/edit) of a CRM WEBUI

Hi,
I have a table(custom) in my CRM WBUI ServiceContratc Page. Now I want to hide this table in create mode.
Could you please let me know, how can I know in which mode I am on WEB UI(Like Create/Change/Display)
Thanks,
Aparna

Hello,
use below method to check whether view is editable/display mode ...
me-->view_group_context->is_view_in_display_mode( me ). here "me" refers to the implementation class of view.
Regards,
Sandeep Kumar B

Whre to see the contract number in sales order

Hi All,
I created conrtact thruogh T.code:va41,based on this number,i create sales order.But my question is where can i see the contract number in sales order(va01).Pls suggest.
Thanks,
GTNR

Hi GTNR,
This is not possible to see in VA01 while creating the sale order,because the system taking the reference document no form buffer,so it is not possible to see in VA01.While creating the order you select create with reference there it self you will tell the system through which contract you want to create the sale order.
Once you save the order in change mode VA02 you can see that through document flow or form table also you can see
as Mr.Ravi mentioned above.
Regards
Ram

I have bought an Item from apple store Called "Scarry Tribes , 19,999 sale ! . from develober Called "XYRALITY GmbH" Type: In App Purchase , and no thing added to my Account in the Game !!?

I have bought an Item from apple store Called "Scarry Tribes , 19,999 sale !" . from develober Called "XYRALITY GmbH" Type: In App Purchase , and no thing added to my Account in the Game !!?
and if you cam Help Me I'll Copy the Invoice or Order number .. !

While I am no fan of Best Buy and would not buy a lightbulb from them I doubt you issues have anything to do with your iMac and more to do with your lack of experience and simply getting bad advice. Judging by you post I suspect you have loaded your computer down with a lot of crapware and that has caused it's problems. For example running antivirus apps on a Mac not only is a waste of time, it's a waste of money, system resources and will eventually create more problems that it solves. Please begin educating yourself on the subject by reading Thomas Reeds articles on the subject, Thomas is a frequent and knowledgeable contributor to these forums. You can find his webpage at http://www.reedcorner.net/tech-guides/
The good news is here are absolutely no, zero, zippo viruses for OS X. There are other types of malware available (for example trojans) however they differ greatly from viruses in that the use has to download and install them, whereas viruses do not work that way. OS X is not like MS Windows and is extremely secure.
My suggestion at this point would be to clean your computer of the crapware (including antivirus apps) however before doing so please download and install EtreCheck and post its report. Then we can see how your computer has been configured and begin to give you some advice on the next steps.

Optimize the performance of the RFC call between ECC and CRM

Hi,
We are planning to extract sales orders, sales activites and service orders to dispaly it on the PDF factsheet of the account.
As of now, the PDF factsheet takes a long time to retrieve the data from ECC to CRM. Can you please suggest us on ways to optimize the performance of the RFC call between ECC and CRM.
Thanks in advance,
Vamsi.

Hello,
[SAP Note 636906 |https://service.sap.com/sap/support/notes/636906]is quite useful here.
Many times, the performance is poor due to function module CRM_CCKPT_EXPORTSUMMARY. This function module gets the customer number, the sales organization and the fact sheet view. If in CRM customizing, you use complete view (001), then all the views in ERP including all the info blocks will be retrieved, which will cause performance issue.
To solve the issue, please use a limited view to retrieve the data from ERP - especially a view, which does not contain info block 013.
Hope it helps
Joaquin

I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTP

It may be best to recreate the folder and the smart playlists from scratch.
tt2

How to block the material qty to 1 while creating sales order (VA01)?

Hi All,
Scenario : We have 20 Materials each with 100 qty in Plant. In the sales order we should have all the 20 materials with qty one. The sales order should throw an error if the material qty is more than 1 and should not allow to create a sales order.
so is there any transaction code where we can block the entire material qty to 1 from the same plant while creating sales order?
Note: We should not set in MM01 "Minimum order qty". Assume we have 100 material in plant we can't set for each material one by one "minimum order qty".Instead of that is there any option to set the whole material qty to 1 as minimum while creating sales order?
Kindly guide me how to proceed.
Thanks,
Renjith

If you have access to idoc before calling the processing Function module, Adding header text segments E1EDKT1 and E1EDKT2 to the idoc will create the header text.
Regards
Sridhar

Help in Calling the C Functions in ECC 6.0

Hi All,
We are in process of Upgrading from 4.6C to ECC 6.0.
There is a particular report which calls the C function 'C_DIR_READ_NEXT' .
In this the Parameter " ID 'TYPE' FIELD FILE-TYPE" is showing as (???)not getting the file type in ECC 6.0 where as in 4.6C it was working fine.
Can any body please tell me why this so and is there any other C function which i can use in the place of this .
Awaiting a favourable reply
wih rgds
A.K.Ranjith Singh

Hi Ranith,
i know there is a new authotity-Object S_C_FUNCT included in this Function.
Look at Note 766771.
If you search in OSS with C_DIR_READ_NEXT, there are some Notes too.
Hope it helps.
Regards, Dieter
You cal also look in RSWATCH0 (AL11) the use of this FM.
Regards, Dieter
Message was edited by:
Dieter Gröhn

How can I call the function module of the ECC when I save the campaign?

HI Experts!
I want to call function module of the ECC when I click the save button in the campaign view,A badi or userexit is needed,but I don't find, can you tell me which badi or userexit is used to implement?

Thanks a lot.
I have tried,but it can't do.
who can tell me which badi and detailed implementation step?
waiting on line.

In my i phone 4s when i call the display moves or shrinks like a vibrate

In my i phone 4s when i call the display moves or shrinks like a vibrate

Have you contacted your carrier?
Who is your carrier and where are you?
Is your carrier on this list? http://support.apple.com/kb/ht1937

Using field i want to call the transcation code

hi,
by clicking the filed i want to call the transcation code.how i can i do.
regards
Sivakumar

Hi u can do that in Menu painter..(Tcode SE41).
While creating the GUI status of a screen..
U will go to SE41 that is Menu paniter screen.
Here while creating the status for a list or screen of a particular program.. u will create the Push buttons in Application toolbar !! right!! GIve the function code in one of the input enabled box and double click on that..
then u will get a popup window where u can give the function text and icon name and info text !! IN the function text give the transaction code here in capital letters... and select an icon.. press enter .. then it will take u to the Function attributes window ... here for the function type field give the input as 'T'. 
and press enter .. save and activate it..
regards,
sai ramesh

I have a mac mini with a web cam/microphone and would like to be able to facetime with my families iPhones 4S/5 using wi-fi email address. I can't call the iPhones from the Mac Mini with Mountain Lion OS. What is wrong?

I am trying to include a Mac Mini with a webcam/microphone to call several family iPhones 4S/5 usisng email addresses vice phone numbers so that we can communicate from outside the US via iPhone to the US (Mac Mini) via wi-fi and email addresses. We are using the same email address for the Mac Mini as for Itunes and made new email addresses for each of the iPhones. I cannot receive calls from the iPhones but can call the iPhones from the Mac Mini. what needs to be corrected?
Thanks.
Steve

Hi Steve,
Thanks for visiting Apple Support Communities.
You may find some useful suggestions in these articles:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Have a great day!
Jeremy

How to Call SAP ECC transactions into CRM IC Webclient Profile Screen

Dear all,
We are implementing IC Webclient application for our Clientu2019s call center operations.
All sales related activities are being created in back end SAP ECC system like, starting from Quotation to Sales Order, Deliveries and Billing.
Client wants to see all relevant ECC reports of Sales transactions in IC Webclient Screen.
Connectivity between SAP CRM and ECC has already been established and we did all basic configuration for IC Webclient, but donu2019t know how to and where to call ECC transaction in IC Webclient Screen.
I am looking for suggestions from any of you to handle this requirement successfully. I would be grateful if you send me any documentation which addresses this requirement.
Your suggestions and help will be highly appreciated.
Thank you,
Raghu ram.

Hi,
Step-by-step process for the same is as follows:
1. Create a launch transaction to launch the relevant BOR object at the following
IMG->CRM->IC WebClient->Basic Functions->Transaction launcher -> Configure Transaction Launcher (Wizard).
This wizard is very useful and easy way to create a launch transaction and guides through each step and generates a handler class for you.
2. This transaction now has to be incorporated in the Navigation bar. For this you have to create navigation bar entry and navigation bar profile.
IMG-> CRM-> IC WebClient->Basic Functions -> Define Navigation Bar Profiles
Here you have to first Define Entries where you would input Launch transaction ID created in step 1 and then Define the Navigation Bar Profile.
3. Assign the Navigation bar profile to IC WebClient profile.
Please note that you can you Transaction launcher for incorporating any web links, PCUI Transactions, CRM Transactions, ERP transactions etc.
Regards,
Deepak

Call the ECC transcation like sales oredr(va01) in CRM Webui through transc

Similar Messages

Maybe you are looking for