Call Time: Current Period = Lifetime

I can not figure out why my call times are equal...and the numbers make absolutely no sense whatsover...I bought my iPhone on iDay and have only done a full restore but once back in Sept...am I right to assume that when I did the restore, I wiped out the lifetime stats?...ok, assuming this is an accurate, then I should at least have lifetime stats that reflect since mid Sept which amounts to about 40 days...yet it shows the following for both current and lifetime call time:
*5 Days 17 hours !!!!!!!*
I have searched the discussion board for an explanation of what might be causing this but nothing jumped out at me...I saw a lot of responses to the standby and usage time but this isn't my issue...do I have a iPhone replacement issue...I've already done a restart and while that affected the standby/usage stats, the current period/lifetime stats remained unchanged...please, does anyone have an answer for this?...any help is greatly appreciated !

Hmmm, so since the restore, I've been on the phone 5 days and 17 hrs...ahhh, and since I've never done a reset, that's why they are equal...that clears it up for me...wow, thanks !
I do have 1 addt'l question, if I may, when I do a reset, will that wipe out both my lifetime and current periods?...or will only the current period reset to zero while the lifetime is maintained for history purposes?
Thanks for taking the time to enlighten me...I sure do appreciate it

Similar Messages

Is the "Call Time Current Period" is the minutes that I used from my plan?

Under the Setting, there are
- Time since last full charge > Usage : is this just minutes(time) since I fully charged?
- Call TIme > Current Period: Is this the minutes I used from my plan (450 minutes for 59.99/mo.)? And is this correctly updated after fully charged?
Thanks in advance for clarifying my questions!

blue sky wrote:
Under the Setting, there are
- Time since last full charge > Usage : is this just minutes(time) since I fully charged?
Yes
- Call TIme > Current Period: Is this the minutes I used from my plan (450 minutes for 59.99/mo.)? And is this correctly updated after fully charged?
No. The current period is just the time since it was last manually reset.
Thanks in advance for clarifying my questions!
No problem

IPhone Call time(lifetime) - Reset

Is Apple plan to add an option to reset the liftime call time? Current reset statistic option only reset the current period time but not the lifetime.
The only solution is to erase the content to factory setting and setup it up as new phone (cannot restore from the backup as the lifetime min will carried fwd from old phone)

You have described the behavior exactly. Not sure what Apple might be thinking, but you can let them know your thougths by going to the feedback page, www.apple.com/feedback and click on the appropriate link.

Current period time vs previous period time

Hi All,
I have to create a report which compare the sales period time..
for example variable 0calmonth period 0108 - 0208
product | current period 0108 / 0208 | previous period 0107 / 0207   | current - previous
TV        |      1000                              |            500                            |   500
Audio    |      100                               |             300                            | -200
its work great
but when I add 0calmonth in column query
product | current period 0108 - 0208 | previous period 0107 - 0207   | current - previous
0107
0207
0108
0208
0107
0207
0108
0208
0107
0207
0108
0208
TV           |     0   |     0 | 800   | 200     | 300    |   200 |    0      |    0    |   -300 |   -200 | 800    | 200   |
Audio    |     0   |     0 | 70   |     30     | 150    |   150 |    0      |    0    |   -150 |   -150 | 70      |    30   |
This is not what i want.
I want this.
product | current period 0108 - 0208 | previous period 0107 - 0207   | current - previous
0108
0208
0107
0207
0108-0107
0208-0207
TV        |   800                     | 200     | 300                           |   200   |   500           | 0              |
Audio    |    70                     |     30     | 150                          |   150    |   -80           |   -120         |
How do that?

Hi,
I think there is a way to do this, take normally first 4 fields, product | current period 0108 - 0208 | previous period 0107 - 0207 | current - previous
Then remove 0CALMONTH from columns and after that create a RKF by new selection, using sales Keyfig. with 0CALMONTH resticted to the value 0108, and next take a new selection and restrict the same with 0208.
Similarly restrict for remaining months also (0107 0207 0108-0107 0208-0207 ) so that it can be arranged in the order u want.
Hope this helps.
Rgs,
I.R.K

How do we know currently active call time in 6680?

How do we know currently active call time? Whenever we receive or make a call, how can we know the call duration in Nokia 6680?

Hello!
Just take a look on page 27 of Manual.
Recent calls: Connect -> Log -> Recent calls.
Steps to activate call duration as follows: Connect -> Log -> Options -> Settings -> Show call duration. Select Yes.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

Call time and lifetime call question

Hi all,
I have just purchased a new Iphone 4, i noticed after 1 week that the call time is 3hr 18mins and the lifetime call timer is also 3hr 18mins. I have only used about 1hr of call time (both inward and outward calls) so why is this saying 3hr + when it should be about 1hr ?? is "data" time included in this ?? my wife got n iphone the same day and hers is on 1hr 7mins and she has used hers more than mine.
Cheers Bill.

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

How to access phone call timer iphone 4

does the iphone 4 have call timers for phone calls anf if so how are they accessed

With the Phone app, select Recents.
Select the right facing arrow in a blue circle icon to the right of a call to view the call time.
For total call time, Settings > General > Usage > Cellular Usage > Call Time. There is a Current Period and Lifetime. You can reset the Current Period time for calls and data.

Facing issues with 3g Mobile Data Usage Current Period and Apps Volumes are differ.

Hi All,
i am facing some data mismatch with my iphones. the actual mobile data usage volume and data usage for Apps volumes are showing different data.
for eg : Mobile Data Usage - Current Data Usage - Current Period volumes showing 342 MB but if i check the Use Mobile Data For Apps Volumes for all Apps including System Service Data's and Uninstalled Data's are showing very less ( around 200 MB only ) compare with Current Period Volumes.
Mobile Data Usage - Current Data Usage - Current Period and Use Mobile Data For Apps ( Apps wise data usage ) Data's are not matching..
Please let me know will it show like that only or its an issue ???? if you want i can share the screen shot as well.

Hello kasinathadurai,
Welcome to the Apple Support Communities!
I understand that you have some questions about cellular data usage and apps that use cellular data. For this question, I would refer you to the attached article that will help explain how data usage, call time, and app cellular data is calculated.
Learn about cellular data settings and usage on your iPhone and iPad (Cellular Model) - Apple Support
Have a great day,
Joe

P & L report for current period,YTD and previous YTD

I am trying to create a P & L report with the columns for current period,YTD and previous YTD, I have include the measures as the key of columns, which by using period or YTD we can retrieve the current period and YTD column, is there as easy way to get the previous YTD? although I can get it by using evtim to het every month and calculate the previous YTD.

resolved, just need to bring both time and measures in the columns

Current period in Accounting 1 view of Material Master

Dear Experts,
In Accounting 1 view of Material Master there is a current period, now it is 12 2009.
Is it possible to make it 11 2009, if yes how to do it.
Please help if you have solution. it is very crucial for me.
Thank you for your support.
Regards,
Zusen

Hi,
Please read the Solution part of note 487381. There is still a few things need to be carry out before you can proceed
with the initialization :
Bear in mind that the initialization of a posting period has the
following effects concerning the period stocks:
    o The initialization of the posting period to a previous or to any
       posting period may lead to the loss of the information of the
       inventory balances of the previous periods.The book value of the
       current posting period is taken as the basis also for values of
       the previous period in this case.
       If you want to continue working with this new posting period, in
       addition you should execute report Z_DEL_HIST_ENTRIES attached so
       that history entries greater or equal to the new posting period
       will be deleted.
    o If you have to briefly reset the posting period by one period
       (for example, postings must still be posted in a certain period)
       just to make a correction (and for a small number of postings),
       you should initialize the posting period back again to the old
       value so that the values of the previous period will not be lost
       (you should forbid postings when carrying out corrections).
       However, afterwards the values of the previous period or the
       history records (as of Release 4.5) of the materials posted in
       this case are inaccurate.
       You should NOT execute report Z_DEL_HIST_ENTRIES in this case.
    o However, if the posting period is generally reset again to a
       previous posting period and if postings were made during this
       time, all information on the inventory balance of the previous
       periods is lost.
       As of Release 4.5a, you should use the cited correction report
    Z_DEL_HIST_ENTRIES in order to delete history records that are
    more current than the current posting period.Otherwise, it can
    result in deviations (inconsistencies) for the update of the
    history records.
o Important! If there are open physical inventory documents that
    have status 'counted' or for which indicator 'Freeze inventory
    balance' has been set, you should reject these if they refer to a
    previous period or have been created in the former previous
    period.The inventory difference to be posted can be determined
    from the current book value of the previous period and the book
    quantity frozen in the physical inventory document (ISEG-BUCHM)
    and does not match the inventory balance of the previous period
    that is currently valid.

Error: No depreciation posting required in period 009 (current period)

Hi,
I am getting error " No depreciation posting required in period 009" and 009 is my current period.
The description of the error says " Do depreciation is posted, since according to the posting cycle no postings are required in this period". In fact this is the first time i am running depreciation. I want to post the depreciation for 1st period. More over i could not able to see the planned values in asset explorer also.
Whenever i am entering this asset in the asset explorer it is giving the above error. But while i run the depreciation its not giving any error. When i check in spool to view the depreciation, its giving msg as "List contains no data" check error log.
Could anyone help me in resolving this error. what could be the reason for this error.
Thanks
Sabera

Hi,
I checked in TABA table, its showing that till 9 the period depreciation has been posted. But i have not posted the depreciation. If it is posted, then it has to show in the planned values as posted, but its showing as "No depreciation" and its not even showing the depreciation for other periods. Could you able to clear this query? I wonder why it is giving this kind of error.
Regards
Sabera

How to change the current period in material master

hi everybody,
as i have installed sap 4.7 ides version on my home pc for practice , but hwenver i am creating the new material master in the system , i observe that in accounting1 tab the current period is 12 2002 , how should i change the current posting period so that i can start the transaction in current uear 2009 and then later i can work in 2010 ....
i have tried the transaction mmrv, mmpv, mmpi through some resources but i didnt know how to do the settings in the system in IMG (SPRO) kindly help me through , i have wasted lot of time in this..
i hope MM team will help me out of this...
AMIT BATHLA

Hi,
Check in OMSY Transaction that, Which current month and year is having your comapny code.
and go to T.Code MMPV
enter Next Month of that cureent period and Year
and Execute. You find the message that your current period has changed.
Do the same process month by month till reaches to current period and year.
Let me know if you have further queries.
Padma.

Current Period in DM package

Hello Experts,
How will we get current period in DM package? What would be the best solution to get current period in DM Package?
We want to load ACTUAL from ECC for current month only. Hence in DM package we want to write this logic to populate current month and use this current month variable to restrict data flowing in the package.
Thanks,
Jim

Hi Jim,
Could you please clarify whether current time period should be applied to external data acquisition e.g. custom load process or current time period to be passed to BPC system logic?
In the first scenario you would implement all logic in standard SSIS with raw SQL or other means so that the dataset made available to BPC (import or otherwise) will only supply required records.
If the current date is needed to determine appropriate time dimension member to run some logic against then there are various options depending on the specific requirement.
Hope this helps,
Madis

Code for N78 to clear call timer ,

hello to all members,
i am trying to reset the call timer but N78 keep asking to enter the code , is there any easy way to reset the call timer each month or i need the code , also where i supposed to get the code, thanks
The only thing necessary for the triumph of evil , is for good men to do nothing .

If you have changed the code and no longer remember what you used then you are stuck. Your only option, if you still want to do something that requires the code, is to perform a full reset on the phone, which will put the security code back to 12345 but will also erase all of your data.
So,
1) Back up all your data
2) Use Nokia Software Updater to reinstall your current firmware version
3) Restore your data
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Call Time: Current Period = Lifetime

Similar Messages

Maybe you are looking for