Call to Arms for the dreaded U052 Wrong Printhead Error

This is a "call to arms" for all of you Canon customers who have had this problem and have had their printers disabled because of it.  Please respond with the model of your printer and if you were able to fix it, what you did to fix it.  We need to put pressure on Canon to respond this product defect.  It appears to be bad firmware that does not allow the user to override the problem and to continue to use the printer even in a degraded mode.  From my investigations the problem is NOT a printhead issue - no way one can be printing fine and then have this error alert without having changed the printhead or ink cartridges! Canon, PLEASE take this issue seriously and provide a solution across the affected models.  If nothing else there should be a trade-in allowance for those printers that have been affected by this product defect. I have had many Canon printers because they have superior functional specifications. I want to be able to continue using Canon products but only if I can have confidence that this product defect will not destroy my investment. If Canon is unresponsive our next step should be to aggressively publisize this product defect on social media and on major product vendor outlet sites as negatives reviews. Forum Users, please reply with your affected model number(s) and with details of any succdessful fix procedure.

This is what I've been able to find so far. 19 posts in 2 of the forums. These represent 36,989 views of the same U052 problem! 16 different models have reported problems:MG5320
MG5350
MP520
MP530
MP600
MP610
MP830
MP860
MP960
MP990
MP970
MX700
MX882
MX860
MX870
MX892 Where is the Canon Product Quality Assurance Department?  This product deficiency should be investigated and a robust solution provided to the thousands of affected Canon loyal customers. What is your response Canon?  Doesn't this warrant a firmware update to correct this product deficiency? Is it time for a class action law suit?
1- U052 Printhead Problem MX870
by chdevers in Printer/Multifunction Support
Stopped printing while in the middle of a big job with full ink tanks, then when turned back on, gave the dreaded U052 print head error message.  I have tried everything given by Canon to re-start...
Show results in replies (5)
‎05-30-2013 06:19 AM
11 Replies
3893 Views
2- my canon mx892 will not print because of error U05...
by markmarn in Printer/Multifunction Support
our canon mx892 will not print due to error U052.  i followed all of the suggested steps for this problem related to an MX700 but it did not correct the problem. now what?
Show results in replies (4)
‎08-10-2013 05:48 PM
4 Replies
1672 Views
3- MG5320 U052 Error
by JimCarey in Printer/Multifunction Support
I have had the MG5320 printer for just over a year now. Everything has been working brilliantly until recently. I am now getting an error: "U052: The type of printer head is incorrect. Install...
Show results in replies (2)
‎11-01-2013 04:13 PM
2 Replies
488 Views
4- My canon MP600 will not print due to error message...
by Shelby27 in Printer/Multifunction Support
Error message - The type of print head is incorrect - install the correct print head. I have not changed the print head - all lights are solid red with the exception of M and C. When you remove them ...
Show results in replies (1)
‎12-30-2013 06:17 PM
1 Reply
190 Views
5- Error code u052 on pixma mg5350, says print head n...
by Dendou in Printer/Multifunction Support
‎09-29-2013 08:15 AM
571 Views
6- mp830
by mags in Printer/Multifunction Support
I keep receiving an error on the screen of my mp830 that says:  Install the correct print head. This started since I put in new ink in all but one ink well...which is the number 5 one, the biggest on...
    •    Tags:
    •    U052
Show results in replies (1)
‎05-24-2013 05:52 PM
3 Replies
1070 Views
7- MP610 no longer printing color
by steger in Printer/Multifunction Support
My MP610 has been working reliably and well for years.   Then... I received a U052 error ("type of print head incorrect"). By removing the print head and cleaning it with hot water, the...
Show results in replies (1)
‎01-28-2014 12:22 PM
1 Reply
137 Views
8- MP830 printhead error message
by Maryruthmarks in Printer/Multifunction Support
After I put in a large black cartridge in my MP830 printer, it comes up with a message saying  "The type of printhead is incorrect.  Install the correct print head"   I did nothing differen...
    •    Tags:
    •    U052
Show results in replies (1)
‎02-01-2014 08:10 PM
1 Reply
41 Views
9- MP520 Print Head Problem
by vf32 in Printer/Multifunction Support
I  tried to print but got the message, "The type of print head is incorrect. Install the correct print head"
Show results in replies (2)
10- Error message on my MX700 Printer: U052 This type ...
by jdegann in Personal Printers
I got this after installing new ink - it worked just a bit and then when I turned printer off and on, got this msg.  I took out cartridges and head, put them back in, and no change.
    •    Tags:
    •    choc1970
    •    U052
Show results in replies (5)
‎11-28-2012 09:16 AM
19 Replies
20152 Views
11- Getting U052 (type of printhead incorrect) on my P...
by Islander in Personal Printers
I'm getting a U052 error message on my Pixma MP610 printer.  It reads "The type of printhead is incorrect. Install the correct printhead."  I replaced an ink cartridge that was running low...
Show results in replies (1)
‎09-01-2013 12:20 PM
1 Kudos
1 Reply
3703 Views
12- U052 error message on my Pixma MP610 printer
by corhoe in Personal Printers
It reads "The type of printhead is incorrect. Install the correct printhead. Whats the solution?   corhoe
Show results in replies (2)
‎01-25-2014 05:12 AM
2 Replies
167 Views
13- Call to Arms for the dreaded U052 Wrong Printhead ...
by macnicol in Personal Printers
This is a "call to arms" for all of you Canon customers who have had this problem and have had their printers disabled because of it.  Please respond with the model of your printer and if y...
    •    Tags:
    •    U052
Show results in replies (1)
‎01-30-2014 10:13 AM
1 Reply
83 Views
14- Canon MX700 error message U052, then 5200
by SKS1971 in Personal Printers
Recently, after installing a new black print cartridge, I received the error message U052. I followed the trouble shooting suggestions. After turning printer back on, now I get error message 5200...
Show results in replies (1)
‎02-28-2013 11:52 AM
1 Reply
925 Views
15- Canon MP990 U052 - print head is incorrect
by jaj in Personal Printers
I have taken the print head out and placed back into the printer - then replaced all ink cartridges - turned printer off - unplugged printer for 10 minutes then turned back on.  This error message ke...
Show results in replies (1)
‎08-15-2013 04:38 PM
1 Reply
463 Views
16- error message u052 canon mx882- printer worked fin...
by ddodds in Personal Printers
Canoon mx882 error message u052 printer and scanner have worked great.  Thought i should do some maintence since in 3 years i had never done it. cleaned roller tested ink heads everything ok   thgen...
    •    Tags:
    •    U052
Show results in replies (2)
‎04-09-2013 09:18 AM
2 Replies
1436 Views
17- how to fix a message from cannon mp530 "check cart...
by gsecondez in Personal Printers
hi, i have a cannon mp530 printer.  it stopped printing and a message showed "check cartridge U052". all of the ink cartridge still have ink and none of them are blinking.  can you please...
Show results in replies (1)
‎08-23-2013 11:34 PM
1 Reply
800 Views
18- Any new help on fixing U052 error on MX860?Reinsta...
by eddytsang in Personal Printers
I have been using this printer for a while.  No change and it just come out with this error.  Is it time to get a new printer? Try the restall print head method.  no luck. Any other suggestions?   Th...
‎01-18-2014 10:27 AM
99 Views
19- My MP970 printer won't print.
by sasa in Personal Printers
 My MP970 printer won't print.  The message says the type of print head is incorrect.  Install the correct print head.  This is the second time in two months this problem arose.  Last time it just st...
Show results in replies (1)
‎07-31-2013 11:02 AM
2 Replies
1097 Views

Similar Messages

  • Canon printer MG5320 U052 Wrong Printhead Error.

    So I received the Wrong Printhead Error Message on my printer today U052. I need help to figure out how to fix my printer. I am a full time student and use my printer quite a bit. I really can't afford to go out and buy a new printer right away... but this is definitely causing me problems as a student. I needed to print stuff up tonight. Help! What do I do?

    Hi resisterdiode! Welcome to the Canon Forums! The Forums aren't intended for immediate assistance. If your question is of an urgent nature, please feel free to CONTACT US either by phone during business hours or email 24 hours a day!

  • Is there a call block function for the iPhone 4S?

    Is there a call block function for the iPhone 4S?  If not, will it be offered in the future?  what else can I do to the phishing calls?

    No.
    Apple has not said.
    Don't answer your phone.

  • Just downloaded 10.5.  It gives me a blank screen for the itunes store.  No error message.  Internet connection fine.  Have checked firewall.  Any ideas?

    I have just downloaded 10.5.  it gives me a blank screen for the itunes store.  No error message.  Internet connection fine and I have checked my firewall settings.  Any ideas?  Or is the store blocked because of ios 5 release today?

    I've had the exact same issue since late last night since I downloaded 10.5
    I'm also having problems backing up my iPhone, which I suspect is due to the same issue.
    I've tried all recommended solutions on forums and Apple support (deleting backups, restarting phone/computer, disabling/uninstalling third party security software, testing port connectivity) and none of them work.
    I will try japiohelp's solution and see if that does anything.

  • There was a problem downloading the software for the iphone. An unknown error occured (-23)

    Hi,
    I cant seems to restore my iphone or even downloading the latest iOS 5 update. The error message is as per subject: "there was a problem downloading the software for the iphone. An unknown error occured (-23)"
    Anyone know how to resolve this?
    I have no issue with my network connection.
    thanks
    Alexis

    i had this problem too, check security updates, itunes update to 10.5, disable firewall and antivirus but still the same problem. Seems there is no answer to it.

  • When I try to move messages to trash I get this  The IMAP command "CHECK" failed for the mailbox "INBOX" with server error: Error in IMAP command received by server..  what do I do ?

    I try to move emails into the trash and this message comes up;
    The IMAP command “CHECK” failed for the mailbox “INBOX” with server error: Error in IMAP command received by server..
    what should I do ?
    My trash is empty and I re booted etc...

    Back up all data. Rebuild the mailbox. Try again to delete the message.

  • The dreaded 'Creative Cloud server error'

    I'm getting the dreaded 'Creative Cloud server error' when trying to sync from my Mavericks MBP. I have reinstalled Creative Cloud's app, I deleted 'opm.db', made sure my file and folder names fit their guidelines, yet the error continues.  It has worked fine since I began using it a long time ago and I've not made any changes to my laptop except adding a couple of new files to the Creative Cloud folder.  I hope this is a temporary issue.  I don't like dragging and dropping into the Creative Cloud via browser window because of the 'no folder' issue.

    What's going on with Adobe?
    No reply on forum, no fix over the phone, useless chat...
    That's how long I was with Adobe yesterday on the phone, and they still didn't help me to fix the problem.
    Oh, not to mention they answered the phone after 1 hour and 26 seconds!!!
    Very frustrating!!!

  • TS2446 Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card an

    Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????

    I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
    What happened is that my garage band looks like it will open then it shuts down.
    I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
    Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
    I really hope I don't have to erase it.
    It'll say it's ,lading my songs then it shuts down .
    If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
    Thank you
    Simachyahi

  • I am trying to run facetime for the first time, marks an error, I am trying to run facetime for the first time, marks an error

    Hi! Need help to run facetime, for the first time.
    An error occurs everytime I try, I quit as its says, but not working

    Hello Vivmex,
    It sounds like you are getting the following message, "An internal FaceTime error occurred: There was a problem with FaceTime. You need to quit and open FaceTime again." 
    This message comes up if you double click on the FaceTime icon on the dock.  If you single click the FaceTime icon on the dock, FaceTime should launch normally:
    Symptoms
    When opening FaceTime from the Dock, the following alert message may appear:
    "An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again."
    Resolution
    Click the FaceTime icon in the Dock one time, then wait for the application to finish opening.
    Additional Information
    This can happen if you attempt to open FaceTime a second time while it is already loading, such as by clicking the FaceTime Dock icon more than once.
    You can find the full article here:
    OS X: "An internal FaceTime error occurred" alert after clicking Facetime icon in the Dock
    http://support.apple.com/kb/TS4457
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When deleting emails i get the following error message at times ...The IMAP command "UID COPY" (to Deleted) failed for the mailbox "INBOX" with server error: Error 9. Server error. Please try again later..

    When deleting emails i get the following error message at times ...The IMAP command “UID COPY” (to Deleted) failed for the mailbox “INBOX” with server error: Error 9. Server error. Please try again later..

    Please complete or update your system profile so the users here can properly help you.
    Which email client are you using?

  • Getting support for the dreadful Digital Editions

    I checked out a book from my library, & returned it on the expiration date using Adobe Digital Editions (ADE).
    Then, because I wasn't done reading it, I checked it out again, (after the expiration period), and attempted to have Adobe reauthorize it.
    What happened?  ADE went into a loop for several minutes, flashing a popup so fast I couldn't read it, ultimately telling me I'm not authorized to use the book.
    Wait, I just checked it out!
    Not wanting to waste too much time on software bugs, I checked out a different book.  This time, when the library due date arrived, I let the book expire without de-authorizing it in ADE.
    I did, however, remove the book using ADE's delete book function.  Then, I went to the library.  The library crudware reported I still had the book checked out, and wouldn't let me download it.  Hunting around on my computer, I saw two 6 MB files in Adobe's Digital Editions folder:  they had the same title as the book I had previously used ADE to delete, dated when I ***first*** checked the book out from the library.  Oh, I guess ADE didn't remove the book as it reported.
    Okay, I said, "I'll buy the **!@$$ book!"  I went to Google, and I bought the book, which gives me the right to read it on my ereader.  In google, the book opened just fine--I guess Google knows how to write software--and I could sit and read the book on my computer, where I don't want to read it.  Nope, I want to read it on my Sony ereader.  That requires I use ADE.  Bummer! 
    So, I clicked the Google button to download the book.  I clicked on the book file as instructed.  Up pops a window from within the dreadful ADE:  "Document is licensed for a different user account."
    I went to Adobe's website to report a bug.  They don't seem to take bug reports on this software, or if they do, they hide it well.  Somewhere, I found a forum in which someone with similar problems told one of the 20 or so people who have previously had this problem that they should delete ADE entirely & reinstall.  I tried that.  Result?  Now, ADE doesn't do anything when I click on the book title.
    You folks at Adobe call this software?  I call it garbage.  And I know of what I speak, having 20 years of software design experience.
    If I don't have access to the book I purchased within a week, I'll also call it a small claims case, and I'll look forward to seeing you in court, where at least if I'm made to waste 3 hours there'll be someone there to respond:  a judge.

    In my opinion, I encountered a series of problems that not only look like they were caused by bad ADE software, they were caused by bad ADE software.
    I did complain to my library about not being able to check out a book that had been turned in.  They pointed the finger at the provider of their library checkout software, which I had described in my post as crudware, (and I think they also mentioned problems with ADE).  But even when my library wasn't involved, Adobe's Digital Editions didn't work right, unless you call "working right" keeping me from reading on my ereader a purchased copy of an ebook.
    After hours of digging, I found the apparent source of the problem:  my password and/or account were different at Adobe and at Sony.  How could "good" ADE software impose such an obscure requirement?
    Adobe digital rights management software is supposed to work with numerous vendors and hardware platforms, no?  Requiring the passwords or the accounts be the same at Adobe and at Sony is not good software design, (especially if it's a hidden or undocumented requirement), because it requires users to know the internals of software assumptions.  If that's good software design, then it's good car design to require one to wear a matching shirt and pants before allowing one to start one's car.  Refrigerator won't work? It's because you forgot to put in matching ice cube trays.  Washing machine not running?  It's because you put a pair of mismatched socks in it!  If Adobe requires the Sony (or Barnes & Noble) account/password to match its account/password, it should not allow one to establish an account when that is not the case, or it should report that "error" clearly. 
    Bad software requires users to perform "tricks" to get the software to perform its functions correctly.  Tricks are for magicians, not product users. Engineers should think of the "tricks" they can perform--i.e., in the design phase--to make a hardware/software experience pleasant and seamless.  For example, to buy a book in a bookstore, I
       (1) walk up to the cash register and pay for the book with cash or credit card, which authorizes me to read (and/or sell my copy of) the book. 
    In my opinion, unless and until Adobe Digital Editions can make the process of ebook buying/authorizing that pleasant and seamless, it has failed its task.  As evidence of the bad ADE software about which I complained, I point to the pages of complaints in this forum, from apparently marooned ebook owners.
    How did I ultimately "solve" the problem that didn't allow me to read the book I had purchased?  After spending hours fussing with Adobe's software, attempting to decipher its error messages, attempting to locate its documentation, (why no help pulldown, as in every other piece of Mac OSX software?), and then posting here, I gave up dealing with Adobe.  Not wanting to hassle with the small claims court suit I mentioned in my initial forum post, I contacted Google to have them rescind my purchase, which they did promptly, through a convenient link.  (How I love software that works right!)  I then contacted Sony, which spent another hour or so with me to diagnose and correct the problem, having me change my account information for Adobe and Sony, even though it certainly looked like it was Adobe digital rights management software that wouldn't let me authorize the book to my ereader.  (Thank you Sony!)
    After about 7 hours of dealing with this problem, spread over several days, I bought the book again.  In that time, I could have flown across country, bought the book, and read the book on the return flight.  Software that makes tasks harder to perform is not "good" software.

  • Issue with transferring calls to VM for the correct DN Unity Connection 9.1.2

    Hi all
    I have been facing an issue with a Unity Connection Server v9.1.2. Every time an internal extension (assigned to VM profile and to Unity as a user) which is configured to be transferred to VM after 20 sec or so NoAN,is called , Unity treats the call as the extension of the calling party and not the called party. Furthermore , I dont know if this has any relation with the problem I am facing but when I check the voicemail port status in RTMT its seems like that regardless it is a direct call to the Unity from an extension (dial the pilot number or press the messages button on the IP phone) or a redirected call from an extension to Unity due to NoAN configuration, the Reason is Direct and the caller party number is always the extension initiated the call and not the one redirected to the Unity (second case).
    I have changed the Use Last (Rather than First) Redirecting Number for Routing Incoming Call  Unity parameter in the
    System Settings > Advanced >Conversations -> checked   and
    Redirecting Diversion Header Delivery - Outbound CUCM parameter ->checked
    in the SIP Trunk configuration used for the integraton of the CUCM with Unity but none of those seem to address this issue. Is there any guidelines you can give me to overcome this issue?
    The servers I am using are
    CUCM v9.1.2 BE
    CUC    v9.1.2 BE
    Thank You in Advance

    Hello again,
    The Voice Mail Box Mask was blank before. However I tried XXXX (I use 4-digit extension for the VM pilot) but this did not seem to fix anything to the system....Same situation as before. Any more suggestions?
    Thank you

  • WHY is there no fix for the dreaded black box installer for me?

    I have searched this forum for days and see my issue with either no replies, or the ones with replies do not work.
    I have a new PC win7.  I am running IE11 and FF34.0.5.  So far I hate my new PC.
    Anyway, I have tried in both browsers all diff ways of installing from the many hints I have come across and still get the black box that hangs.  If I click on it a few times - sometimes - it takes me to the browser page and says "server not found."
    BTW, in IE addons, flash is not listed so I cannot enable it like so many hints have said to do.  If it was that easy, I would not be here looking for help!
    FF also does not have flash listed nor when I look for new addons is it an option!
    At this point I am keeping my old pc to do certain things like plays games, etc.  This is ridiculous though!
    I also see there is no phone number and no tech support outside of this forum, yet we at the mercy of Adobe Flash.  This is really not cool.
    So I implore you, Adobe, can you please tell us how to fix this???

    Hello,
    We are aware if the 'black box' issue with the shim installer (downloaded from get.adobe.com/flashplayer), however, this should not be the case with the full installer.  The links for the full installers are posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
    Maria

  • Call to arms for BPX ers!

    Hi All
    I was just wondering, are there any BPX folk left in here or has the forum been taken over completely by the ERP folk ? The same comment goes for the Organisational Change Management thread. : ) 
    Actually its kind of interesting to see the community evolve in its own direction but just in case there are BPXers reading this.
    C'mon, lets see some BPX content from you!
    Have you managed to solve all of the challenges facing organisations when looking to introduce BPX tools such as Visual Composer or ARIS?
    How have you introduced a true business process management philosophy within your organisation ?
    How do you solve the dilemma of how to integrate organisation Process Models not constructed within ARIS into configuration models contained within Solution manager ?
    How do you choose to close WRICEF gaps and make a decision between developing an xAPP or ABAP based development within your ECC box ?
    Lets see if we can come up with some good BPX content…..

    Atte
    When I used the term WRICEF Arun quite rightly clarified what it stood for, unintentionally I had used an acronym that everyone may not have understood. Its been my experience that quite often on SAP (and other business transformation ) projects we use these acronyms and don't always take the time to ensure that;
    Business users understand the term clearly in business terms
    That the context in which they are used is correct
    That it is appropriate to use the term
    My intention was to see whether others in the BPX community had ever used the Jargon buster concept within the context of a business change readiness programme to help the business deal with the IS/IT change.
    Of course this was a slight side-track from the original intention which was to try to generate some BPX content discussion. Thanks for taking the time to ask the question, hopefully we can generate more discussion from within the BPX community.

  • Changed Ulimits values for the Oracle user and getting error -bash: ulimit: max user processes: cannot modify limit: Operation not permitted when logging in.

    I'm trying to increate the ulimits for max user processes and open files for the oracle user.  I've set the values in limits.conf, /etc/profile and in oracle's environment scripts. Now when I log in as oracle I get the below errors. If I change the ulimits back to the original values errors go away but ulimits aren't changed.
    login as: oracle
    [email protected]'s password:
    Last login: Fri Mar  6 09:56:02 2015 from mtkadmin12
    You are logging onto an Oracle system.
    Kickstarted on: 2014-06-05
    -bash: ulimit: max user processes: cannot modify limit: Operation not permitted
    -bash: ulimit: max user processes: cannot modify limit: Operation not permitted
    [oracle@servername ~]$

    Thanks for the update.
    I modified the /etc/security/limits.d/90-nproc.conf and added a line for oracle and also modifed the oracle.sh file.  The ulimits are setting correctly when I su - oracle but they are still wrong when sshing in as oracle.
    [root@mtkdevorap11d-1 ~]# su - oracle
    [oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
    core file size          (blocks, -c) unlimited
    data seg size           (kbytes, -d) unlimited
    scheduling priority             (-e) 0
    file size               (blocks, -f) unlimited
    pending signals                 (-i) 1030982
    max locked memory       (kbytes, -l) 94371840
    max memory size         (kbytes, -m) unlimited
    open files                      (-n) 65536
    pipe size            (512 bytes, -p) 8
    POSIX message queues     (bytes, -q) 819200
    real-time priority              (-r) 0
    stack size              (kbytes, -s) unlimited
    cpu time               (seconds, -t) unlimited
    max user processes              (-u) 16384
    virtual memory          (kbytes, -v) unlimited
    file locks                      (-x) unlimited
    [oracle@mtkdevorap11d-1 ~]$
    [oracle@mtkdevorap11d-2 ~]$ ssh mtkdevorap11d-1
    Last login: Mon Mar 16 13:04:16 2015 from mtkdevorap11d-2.conveydev.com
    You are logging onto an Oracle system.
    Kickstarted on: 2014-06-05
    [oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
    core file size          (blocks, -c) unlimited
    data seg size           (kbytes, -d) unlimited
    scheduling priority             (-e) 0
    file size               (blocks, -f) unlimited
    pending signals                 (-i) 1030982
    max locked memory       (kbytes, -l) 64
    max memory size         (kbytes, -m) unlimited
    open files                      (-n) 4096
    pipe size            (512 bytes, -p) 8
    POSIX message queues     (bytes, -q) 819200
    real-time priority              (-r) 0
    stack size              (kbytes, -s) unlimited
    cpu time               (seconds, -t) unlimited
    max user processes              (-u) 16384
    virtual memory          (kbytes, -v) unlimited
    file locks                      (-x) unlimited
    [oracle@mtkdevorap11d-1 ~]$

Maybe you are looking for

  • How to use BI in netweaver  2004(trial edition for abap)?

    I am new in BI field. I downloaded the netweaver 2004(trial edition for abap)and installed it on my laptop. But the system said I am not authorized to use BI function:( how can I use it, thank you

  • How can i change the length of a line like-particle in Particle World settings?

    I made a Particle World with the Line type of particles, but i want to change the individual length of the particles (the lines) is this possible somehow? Thanks in regard. 

  • Buckup SQL Script doesn't work

    Hi  all, In ECC i want schedule ASE jobs to  dump transaction logs,i do it fellow the note 1588316 step by step .  In  schedule jobs my sql script doesn't work,but it works in sql command line. sql script : dump transaction DEV using config= 'DEVLOG'

  • Forms 6i

    i have following queries- 1. i have made forms using forms . i want to test these forms on clients site using forms .fmx files only.how can i do this 2.to call forms using call_form how can i avoid hard coding so that the software can be easily deplo

  • "getBounds" of a String

    i am writing a program that can generate report. but i have problem on right-alignmnet Chinese when printing.. the getBounds() function not return correct string width. how can i solve the problem??