Call to flush() does not return

I have an application that manages network connections to various other applications and sends and receives messages (lines of text) to and from each. Each message to be sent is written to the socket's output stream, followed by a call to flush()
Occasionally, a call to flush() on one of the sockets will freeze, and fail to return. This behavior is random and fairly rare and thus I haven't been able to reproduce it. A stack trace of the affected thread follows:
TradeThread 2" daemon prio=10 tid=0x0000000043618800 nid=0x4b5 runnable [0x00000000427f4000]
   java.lang.Thread.State: RUNNABLE
        at java.net.SocketOutputStream.socketWrite0(Native Method)
        at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
        at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
        at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:202)
        at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:272)
        at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:276)
        at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:122)
        - locked <0x00002aaab36a6558> (a java.io.OutputStreamWriter)
        at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:212)
{code}
Perhaps the buffer on the consumer end of the socket is full, but that seems unlikely, as the app consuming the messages has no exceptions, and seems to be performing fine (i.e. is not consuming messages slower than they are being sent).
Does anybody know of any other reason a call to flush would not return?

Will that call block forever?No, see below. However there's no write timeout if that's what you mean.
It seems that being unable to flush a buffer because the consumer won't take any more data would warrant an exception being thrown.Why? What if the consumer stops reading for an hour? a day? a year? Where exactly are you going to draw the line? A write timeout would be nice but TCP doesn't have one.
What if the app on the consumer side of the connection exits? Wouldn't that cause an IOException to be thrown?Yes, IOException: connection reset by peer, if the peer closes the connection via any means.

Similar Messages

RunState.Caller.Sequence.AsPropertyObject does not return the comment

RunState.Caller.Sequence.AsPropertyObject.Comment gives a null string
but RunState.Caller.Sequence.AsPropertyObject.Name does give the right name of the sequence
any idea what teststand is doing here

Hello,
I develop an application operator of testsrand in c#, and I etulise the order dowry Net, I want to get the current sequence execution in a listview in c#
I do not arrive introduced the code
RunStat.CallStack in my code
here my code
private void btnStart_Click(object sender, EventArgs e)
affichageDeroulementTest.Clear();
// Execution de Programmme
myExecution = myEngine.NewExecution(mySqFile,
"Test UUTs", mySqFile.GetModelSequenceFile(out sDummyString), false, 0, null, null, null);
Please
it is somebody can help me has recovers the sequence in the course of execution
thank you;

Runtime.getRuntime().exec() does not return

Hello,
I am running into a case where the call to Runtime.getRuntime.exec(command) does not return. The scenario is that the main thread spawns another thread which calls the Runtime.exec(). Since the call does not return, both threads seems to be hung. The jstack output from the main thread shows
----------------- t@2 -----------------
0xfeedab45 ___lwp_cond_wait + 0x15
0xfeb4030d void os::PlatformEvent::park() + 0xa9
0xfebadd48 void ObjectMonitor::wait(long long,bool,Thread*) + 0x26c
0xfe770287 void ObjectSynchronizer::wait(Handle,long long,Thread*) + 0xef
0xfe76ffbb JVM_MonitorWait + 0x20f
0xfb20a032 * java.lang.Object.wait(long) bci:0 (Interpreted frame)
0xfb20308d * java.lang.Thread.join(long) bci:38 line:1143 (Interpreted frame)
0xfb20308d * java.lang.Thread.join() bci:2 line:1196 (Interpreted frame)
0xfb20308d * DataLoader.checkThreadGroup() bci:92 line:316 (Interpreted frame)
0xfb202f27 * DataLoader.checkTables(int) bci:1 line:336 (Interpreted frame)
0xfb202f69 * DataLoader.runLoad(int, java.lang.String, java.lang.String, java.lang.String, com.sabre.fltsked.apm.util.FSIOHelper)
... more below ....
So it is waiting for the spawned thread on a join()
And the jstack dump for the thread that called exec() is
----------------- t@70 -----------------
0xfeed7409 __lwp_park + 0x19
0xfeed1be7 cond_wait_queue + 0x5e
0xfeed1f64 cond_wait_common + 0x1db
0xfeed20d2 condwait + 0x7b
0xfeed20fd cond_wait + 0x21
0xfeed2136 pthread_cond_wait + 0x1b
0x9741082a soft_delete_object_cleanup + 0x57
0x97410906 soft_delete_object + 0x5b
0x97410953 soft_delete_all_objects_in_session + 0x2e
0x97407b7a soft_delete_session + 0xec
0x97407860 soft_delete_all_sessions + 0x3c
0x97402525 finalize_common + 0x66
0x974026ae softtoken_fini + 0x34
0x974355f9 _fini + 0x21
0xfefdd49a remove_hdl + 0x766
0xfefd8be9 dlclose_core + 0xb1
0xfefd8c1d dlclose_intn + 0x21
0xfefd8c96 dlclose_check + 0x2a
0xfefd8d00 dlclose + 0x38
0x97480aeb pkcs11_slottable_delete + 0xb1
0x9747c691 finalize_common + 0xe2
0x9747c6e0 pkcs11_fini + 0x3e
0x9747c3bf pkcs11_fork_child + 0x73
0xfee628b8 postforkchild_handler + 0x2f
0xfeeca9ec fork + 0x12e
0xfe338029 Java_java_lang_UNIXProcess_forkAndExec + 0x395
0xfb20a032 * java.lang.UNIXProcess.forkAndExec(byte[], byte[], int, byte[], int, byte[], boolean, java.io.FileDescriptor, java.io.FileDescriptor, java.io.FileDescriptor) bci
:0 (Interpreted frame)
0xfb202f69 * java.lang.UNIXProcess.<init>(byte[], byte[], int, byte[], int, byte[], boolean) bci:62 line:53 (Interpreted frame)
0xfb20308d * java.lang.ProcessImpl.start(java.lang.String[], java.util.Map, java.lang.String, boolean) bci:182 line:65 (Interpreted frame)
0xfb202f27 * java.lang.ProcessBuilder.start() bci:112 line:452 (Interpreted frame)
0xfb202f27 * java.lang.Runtime.exec(java.lang.String[], java.lang.String[], java.io.File) bci:16 line:593 (Interpreted frame)
0xfb202f27 * java.lang.Runtime.exec(java.lang.String, java.lang.String[], java.io.File) bci:69 line:431 (Interpreted frame)
0xfb202f27 * java.lang.Runtime.exec(java.lang.String) bci:4 line:328 (Interpreted frame)
0xfb202f27 *SQLLoad(java.lang.StringBuffer) bci:181 line:51 (Interpreted frame)
0xfb202e61 *FSLoadThread.run() bci:84 line:54 (Interpreted frame)
The command I am trying to exec is "sqlldr" and I do have it in my PATH variable. Why is that the call to exec does not return? Any ideas?
This is on jdk1.6.0_17
Thanks,
Bijoy.

It has definitely forked, and this is the child process. It says so. If it was the parent process it would just show Java code related to launching processes. That does not involve PKCS11. After the fork there are two identical processes with the same stack: the child process of the fork goes on to replace itself with the target command via Unix exec(), which it doesn't look like it is succeeding at. The parent process doesn't do much at all, probably just housekeeping and then a Unix wait() for Process.waitFor() to hook into.

FM HRTRV_IF_GET_TRIP does not return USERDATA

Hi, it's me, yet again...
I'm using the FM "HRTRV_IF_GET_TRIP" in FITE_VC_GENERA_DATA in a post exit of comp-controller method "ON_SHOW" to get the structure/Table USER/PTK99 from the TE Cluster for binding to the context afterwards. At least that's the plan. The FM does not return me the data I expect in parameter USERDATA, although there is data in the TE Cluster and within the FM, I can see the global Table USER being filled whilst the macro RP-IMP-C1-TE. But this data is not further process neither is seems the strucutre USERDATA to be touched at any point of the FM. Am I calling the FM 'wrong' in any way? I'm close to making an implicit enhancement at the end and forcefully fill userdata from user....
Too long, didn't read: USERDATA is not returned filled --> WHY?
CALL FUNCTION 'HRTRV_IF_GET_TRIP'
EXPORTING
    employeenumber             = wd_assist->GS_COMMON_RFC_INPUT-employee_number
    tripnumber                 = lv_tripno
*   LANGUAGE                   = SY-LANGU
*   CALCULATE_AMOUNTS          = 'X'
*   GET_TRIP_FROM_MEMORY       = ' '
IMPORTING
*   FRAMEDATA                  =
*   STATUS                     =
    USERDATA                   = ls_user " should contain cluster values, but it doesn't
tables
*   RECEIPTS                   =
*   ADDINFO                    =
*   GUESTS                     =
*   TEXT                       =
*   MILEAGE                    =
*   STOPOVER                   =
*   DEDUCTIONS                 =
*   COSTDIST_TRIP              =
*   COSTDIST_STOP              =
*   COSTDIST_RECE              =
*   COSTDIST_MILE              =
*   AMOUNTS                    =
*   ADVANCES                   =
    return                     = lt_bapiret " says method was executed successful
In the insides of the FM:
* IF CALCULATE_AMOUNTS <> 'X'. "XJY
* import the trip because it was NOT imported before
READ TABLE T_PERIO INDEX 1.
TE-KEY-PERNR = T_PERIO-PERNR.
TE-KEY-REINR = T_PERIO-REINR.
TE-KEY-PERIO = T_PERIO-PERIO.
TE-KEY-PDVRS = T_PERIO-PDVRS. " Once this line is executed, the global table USER is fileld with the data I expect
RP-IMP-C1-TE.
* ENDIF. "XJY
if t_perio-abrec = '0' or
     t_perio-abrec = '1'.
    clear te-key-pdvrs.
    import beler from memory id te-key.
endif.
I hope somebody has ever used this one and can tell me what I'm doing wrong...
Cheers, Lukas

good to know. that you have already implemented similar thing. In our case if employee want to pick a manager he will only be given option from a custom table entries.
They way i was thinking was that there will be a checkbox that will say "Override Approver"
and when that will be checked text filed will be enabled with search help restricted to custom table entries.
I have one question. When I am enhancing FITE_VC_REVIEW and adding field in that view, I m finding it hard to track it. Looks like adding to General data screen will be much easier.
R u using ABAP memory to track field and use it at SMOD or you are using SAP memory ?
I am just starting on this one and not expert at webdynpros.. will ping you if i need any more help
and yes i just added following like in FM HRTRV_IF_GET_TRIP
read TABLE user INTO userdata INDEX 1
to get it to load userdata..

WB_RT_GET_JOB_METRICS does not return values

DB v 10.2.0.2
OWB repository/client v 10.2.0.3
A DB function has a call to the Control Center transformation WB_RT_GET_JOB_METRICS to extract and preserve the metadata of number of records inserted/updated/deleted in a DB table.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1.
The control center transformation WB_RT_GET_JOB_METRICS does not return any values when used under the Post-Mapping Process(mapped to the DB function describe above) in a Map.
The input parameter ;Audit Id' to the Map is passed from a calling Process Flow. The following query is used to retrieve the Audit Id of the Map.,
SELECT execution_audit_id
INTO l_audit_id
FROM ALL_RT_AUDIT_EXECUTIONS
WHERE parent_execution_audit_id = P_AUDIT_ID;
And the retrieve l_audit_id is passed to the WB_RT_GET_JOB_METRICS transformation to extract the number of records inserted/deleted/updated with the execution of the map.
Gurus, please advice if the approach is appropriate to retrieve the number of records inserted/deleted/updated by the execution of the map. If not, any alternate method.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2. The control center transformation WB_RT_GET_JOB_METRICS returns values when used in a standalone pl/sql block with the appropriate audit_id.
Is this because the metadata for the Map execution is complete, whereas in the earlier attempt, the transformation is called within the map using the Post-Mapping process.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3. Since the option 1 did not return any value, tried other option of calling/executing a transformation(call the the DB function mentioned earlier) after the Map activity is successful in a ProcessFlow. Here, the transformation does not seem to be executing, any tips of correcting this issue.
Request the forum for some helpful tips to resolve the problem. TiA (Thanks in Advance) for the response.
Message was edited by:
user599655

In a process flow, passed the pseudo variable to a transformation to run the WB_RT_GET_JOB_METRICS after the map execution. I am not sure if this is the best solution, but it worked for me.
Still trying to figure how to use the pre-defined transformation when working on expression.
Thanks.

OCIStmtExecute does not return immediately when client is busy.

Hi.
I'm testing a very busy multi-threaded client server that consistently generates
a large number of simple queries through oci. The problem is that, when the
server(client) is busy, OCIStmtExecute does not return immediately in
non-blocking mode.
Of course I have set non-blocking mode and OCIStmtExecute does return
OCI_STILL_EXECUTING immediately when the server is not busy. But
when log rotation occurs which concatenates a large text file (~500MB)
onto an even larger text file (up to several giga bytes), or when I simply copies
or concatenates large text files manually, OCIStmtExecute returns very slowly.
(roughly about after 100~200ms)
However, while log rotation takes place, everything else including other oci
calls that come before OCIStmtExecute (prepare, define) return fast. So
for me it really seems that only OCIStmtExecute becomes extremely slower
when local server (especially the disk) is busy.
Is there any way to let OCIStmtExecute immediately return all the time?
Thanks in advance.

Yes, I knew that OCIStmtExecute would be the only function that causes such
delay and that was why I traced that call. And so far, I checked several times
what happens at the exact moment on the server but everything was ok.
Actually OCIStmtExecute becomes slower exactly when crontab-ed log rotate
occurs so I think this delay must be a client-side problem for now.
This server is quite busy and has to respond fast, so it is important to
guarantee fast response time while a small number of timeout losses are tolerable.
But as OCIStmtExecutes' first OCI_STILL_EXECUTING return takes hundreds of
ms it has become more like a blocking call and currently I cannot find any way to do what I want.
So now everytime such thing happens, the thread waits
quite long, after the first OCI_STILL_EXECUTING return
the time difference exceeds timeout limit, and the thread
calls OCIBreak() and OCIReset() and returns.

Group Used as LOV does not return records

Have:
1. A header table called Claims
2. A detail table called ClaimLines
3. The Claims Table has a foreign key called emp_no which refers to an employee table ( Claims for an employee)
4. The ClaimLines table has a foreign key called mem_id which refers to an employee family members table that also has emp_no as a foreign key (family members for an employee)
5. A JHS group for Claims that shows the employee name and employee id. An LOV populates the employee name and employee id
6. A details group fro CalimLines that shows family member name. An LOV populates the member name and member id. (The idea is to pull family members for the employee selected in the header section in 5 above.
Problem:
The calims LOV populates the employee name and employee id correctly.
When I move to the calimlines (details), the members who should be restricted to the employee selected in the Claims group does not return any records.
The LOV for the members is based on a VO called DependentsofEmpolyee that has a where clause emp_no=:p_emp_id (:p_emp_id is a bind parameter)
The LOV group for the members has an EL expression in the Query Bind Parameters
p_emp_id=#{bindings.ClaimsEmpId.inputValue}. The expression is to restrict the members to those who belong to the employee selected in the Claims section of the page.
Debug gives the following information:
-ViewObject DependentsOfEmployee1: bind parameter values have not changed, NO Requery performed.
It seems that the p_emp_id is not being populated with the emp_id from the header section(Claims)
The same EL expression works if applied to a dynamic LOV. The drawback of the dynamic LOV is that is only populates two fields, the value attribute and the meaning attribute. In our case we need to populate more than one attribute.

Thanks for the input.
I tried the following
1. Create a managed bean in faces-config.xml.
<managed-bean>
<managed-bean-name>FamiliyLovContext</managed-bean-name>
<managed-bean-class>FamiliyLovContext</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
2. Updated the skeleton class FamilyLovContext.java to:
public class FamiliyLovContext {
Number empId;
public void setEmpId(Number empId) {
this.empId = empId;
public Number getEmpId() {
return empId;
3. Copied tableLovItem to tableLovItemFamily and added the following to the section
<af:selectInputText
<af:setActionListener from="#{bindings.ClaimsEmpId.inputValue}"
to="#{FamilyLovContext.empId}"/>
4. Used the the new template for the lov item in the claimlines group.
5. set the query bind parameters of the lov group to #{FamilyLovContext.empId}
I gor the following error
16:38:08 ERROR (ApplyRequestValuesPhase) -java.lang.IllegalArgumentException: argument type mismatch
javax.faces.el.EvaluationException: java.lang.IllegalArgumentException: argument type mismatch
     at com.sun.faces.el.ValueBindingImpl.setValue(ValueBindingImpl.java:248)
     at oracle.adfinternal.view.faces.taglib.listener.SetActionListener.processAction(SetActionListener.java:50)
     at javax.faces.event.ActionEvent.processListener(ActionEvent.java:77)
     at oracle.adf.view.faces.component.UIXComponentBase.broadcast(UIXComponentBase.java:548)
     at oracle.adf.view.faces.component.UIXEditableValue.broadcast(UIXEditableValue.java:243)
     at oracle.adf.view.faces.component.UIXSelectInput.broadcast(UIXSelectInput.java:170)
The ClaimsEmpId attribute is Number(4,0)

Function does not return a value

CREATE OR REPLACE PACKAGE BODY Promo_Version_Logo_Pkg IS
FUNCTION Promo_Version_Logo_Rule(Rc IN test.Ot_Rule_Context)
    RETURN Ot_Rule_Activation_Result
   IS
    PRAGMA AUTONOMOUS_TRANSACTION;
    v_Result NUMBER;
    CURSOR Cur_Promo_Logos IS
      SELECT Pvlo.Promo_Id,
             Evt.On_Date,
             Evt.Channel_Id,
             Evt.Start_Time,
             Evt.Duration,
             Pvlo.Logo_Id
        FROM Event                  Evt,
             Event_Technical_Data   Etd,
             Promo_Version_Logo_Opt Pvlo,
             Promo_Timing           Pt
       WHERE Evt.Event_Technical_Data_Id = Etd.Event_Technical_Data_Id
             AND Etd.Promo_Timing_Id = Pt.Promo_Timing_Id
             AND Pt.Promo_Timing_Id = Pvlo.Promo_Timing_Id
             AND Evt.Channel_Id = Rc.Channelid
             AND Evt.On_Date >= Rc.Fromdate
             AND Evt.On_Date <= Rc.Todate
             AND Evt.Day_Type_Id = Rc.Daytype;
BEGIN
    FOR Each_Record IN Cur_Promo_Logos LOOP
      v_Result := Testing_Pkg.Insert_Event(v_Channel_Id   => Each_Record.Channel_Id,
                                                       v_Tx_Time      => Each_Record.Start_Time,
                                                       v_Tx_Date      => Each_Record.On_Date,
                                                       v_Content_Id   => Each_Record.Logo_Id,
                                                       v_Duration     => Each_Record.Duration,
                                                       v_Event_Type   => Uktv_Tools_Pkg.c_Logo_Kind_Code,
                                                       v_Container_Id => Each_Record.Promo_Id);
      IF v_Result = -1
      THEN
        EXIT;
      END IF;
    END LOOP;
END Promo_Version_Logo_Rule;
END Promo_Version_Logo_Pkg;why do I get this "Hint: Function 'Promo_Version_Logo_Rule' does not return a value" after I compile it? The Testing_Pkg.Insert_Event should insert some values somewhere...I just want to try to test it before I move on onto the next bit of it, but I do not understand what I am doing wrong...
Thanks

You need something like:
    END LOOP;
    RETURN v_Result; -- if this is what you are trying to get the function to do
    EXCEPTION
      WHEN OTHERS THEN
      <exception handling/logging - whatever you want>
      RAISE; --this with then raise an error back to the calling process
END Promo_Version_Logo_Rule;This way the function either returns a value, or an exception which can be handled in the calling procedure

VOD Sound drop at commercials and does not return when TV show resumes

i've noticed that there are other customers experiencing this problem and I have not seen any response from COmast support.When playing a TV-Show from On-Demand, the sound drops when a commerical starts and does not return when the TV Show resumes.A reenct example: Walking Dead 515.Yes, I have called comcast support to report it.Of course they wanted me to go through the standard drill - Power Off/On; Refresh Signal; etc. with no result...The problem occurs on series, e.g. - Walking Dead 515; Grey's Anatomy; It happens after the episode has been in the On Demand listing for about a week.It seems that the sponsors are no longer paying for the commercial, so the sound drops when the commercial comes on.However, the sound does not come back when the commercials end and the show comes back on.Stopping playback and starting at that point returns the sound, but, - oftentimes, the counter doesn't advance correctly in the Recently Viewed listing, so you end up starting back to the last time you stopped it. This is clearly a bug on the back-end, and I don't expect it to be fixed until enough people complain and Comcast Support replicates the problem observes it for themselves.

I have this EXACT problem on Anthony Bourdain's show Parts Unknown and the Last Ship. As soon as it hits the advertizement sound drops and continues as dropped. Pausing and restarting the program completely after exit regains sound but as soon as it hits another commercial it goes out again. The counter problem makes this option only good for a few times. Then it resets back.

_api/Web/Lists/GetByTitle does not return People or Group lookup value with $expands

I have a list in SharePoint 2013 with a people picker field. I am trying to retreive the list info on cient side in javascript. URL does not take lookup field display name (as stated in some articles) but it was taking AssignedPAId instead. However further
expands does not return any thing. I need to return the assigned to user name in this case.
List columns
Title
primaryowner
AssignedPA (People or Group field)
REST Query URL:
_api/Web/Lists/GetByTitle('demolist')/items?$select=Title,primaryowner,AssignedPAId/Name&$expands=AssignedPAId/Name
It keeps returning me Id only regardless i am asking /Name.
Any help on query? Please suggest a working query only. i have already googled/binged enough.........................
Moonis Tahir MVP SharePoint,MCTS SharePoint 2010/2007, MCPD.net, MCSD.net, MCTS BizTalk 2006,SQL 2005

Hi,
According to your post, my understanding is that you want to get the user name of the people picker control.
To get the user name in the people picker control, we can use the SPService to achieve it.
There is a function called
SPFindPeoplePicker , we can use this function to get the display name.
There is an article about this topic, you can refer to it.
http://sympmarc.com/2012/04/22/working-with-sharepoint-people-pickers-with-jquery-a-new-function-called-findpeoplepicker/
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How to Create a record if vo.executequery does not return any rows

I would like to update a single record on adf form. However if the record does not exist would like to create a row and save it in the table.
The user does not want to add a "create" button on the screen. Hence would need to add the create code if vo.execute does not return any rows...
How to add this and where to add?

you can have a TF router for for exists and does not exist and based on that execute transient VO and other VO.
Add a method call activity like below to create a row in transient VO
public Row createRow()
ViewObjectImpl tVO = (ViewObjectImpl)getTVO();
tVO.executeEmptyRowSet();
Row newRow = tVO.createRow();
tVO.setCurrentRow(newRow);
tVO.insertRow(newRow);
return newRow;
}

WebI does not return failed when scheduling a report which only holds parti

WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

Hi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini

My PC does not return to the source document I print from

I had a setting control for
this in XP but can't find the page I got it from.<o:p></o:p>
<o:p> </o:p>
In ANY application or browser
this happens. I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from. This is maddening and causes all kinds of issues.
Searching the web for this now produces nothing and I know I can't be the
only person who experiences this.<o:p></o:p>
<o:p> </o:p>
This is a Windows 7 platform
in a networked business environment. I'm running the Classic Menu add-in
from Addintools because I can't stand the ribbon and have never liked it.
In Windows 7, I'm running a couple of other add-ins that restore the XP
use of the task bar properly so one can work efficiently.<o:p></o:p>
<o:p> </o:p>
None of the add-ins are what
is causing this issue because I'd run the same Classic Menu add-in on the XP
box and it had the same issue until I found the work-around that I can't
remember now.<o:p></o:p>
<o:p> </o:p>
Has anyone else experienced
this issue?<o:p></o:p>
<o:p> </o:p>
Jeff Lynch<o:p></o:p>

Hi,
"I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from."
If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
Yolanda Zhu
TechNet Community Support

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Search does not return my documents

Hi Gurus,
I have created few documents using CM SDK. I could able to see these documents using IFS browser.
Now I wrote content search method to search document content.When I search for "cmsdk" string it returns 13 documents.But when I search for a string in the document, I created , for example a text like "struts" it does not return any result , though this document I can see in IFS browser.What could be the reason?.
BTW I didn't create any FORMAT type while I am storing the document. Can any one point me to a document where I can find some instructions on "must and should things to do before search".
I am using CM SDK 9.0.3.
Thanks in advance.
Giri.

have you set the indexing on?

Call to flush() does not return

Similar Messages

Maybe you are looking for