Call to WPG_SESSION API Failed.
I cannot access the portal from the home page (or any page) I cannot even get into the DAD configuration. I have never seen the new version of portal as it killed my old version on upgrade and I cannot seem to install the new one right. I have followed the install instructions to the T and still cannot get this software to run.
I am getting really fed up with oracle portal.
This is a fresh install of 9iAS 1.0.2.1 on windows 2000 I am running 8.1.7.
Does anyone know what is going on and how to resolve this error?
Can you tell me where the problem was for you? I am getting wpg_session api failed error 6550. I installed 8.1.7 on one host and 9iAS on another. Diag.exe succeeds. Dads seem to be ok. I can connect to the database using SQL*plus. I just can't get a portal web page.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Chopsaki:
bill,
I finally figured out where the problem. As I said I already followed these instructions down to the 'T'. Anyway while you are here... I had a question about uploading images and inserting them into a table as blobs. Does portal support this (without custom dev)? I saw that you had responded to someone about this already, but the document you mentioned was a dead link.
Thanks for responding and thanks in advance.<HR></BLOCKQUOTE>
null
Similar Messages
-
I ran upgrade scripts to 3.0.8 from 3.0.6 and completed with no errors.
csh diag.csh reports no errors.
sqlplus to connect string works fine
DAD connect string is correct.
err text:
Call to WPG_SESSION API Failed.
Error-Code:6550
Error TimeStamp:Tue, 5 Jun 2001 03:36:50 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
DIAG.CSH output
oracle(dba)@ws12:/export/home/upgrade:$csh diag.csh -s portal30 -p portal30 ->
Begining Portal Diagnostics
...portal_schema: portal30
...portal_password: *************
...connect_string: iforce
Loading java class for Portal Diagnostics ...SQL*Plus: Release 8.1.6.0.0 - Production on Mon Jun 4 20:48:59 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
SQL> SQL> Creating Table 'wwsec_diagnostic$'
Creating Sequence 'wwsec_diagnostic_seq'
Diagnostics Report v 1.0: Oracle Portal v 3.0.8.9.8
As of 04-Jun-2001 20:49:02 Schema Name: PORTAL30 SSO Schema Name: portal30_sso
PORTAL30.wwsec_enabler_config_info$
Login Server URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : iforce
Authentication mode : Single Sign-On
portal30_sso.wwsec_enabler_config_info$
Login Server URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : iforce
Authentication mode : Single Sign-On
Partner Application Information
**** Oracle Portal (portal30) ****
Home URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30/portal30.home
Success URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30/portal30.wwsec_app_priv.process_signon
DAD : portal30
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30
Connect string : iforce
Authentication mode : Single Sign-On
**** The Login Server (portal30_sso) ****
Home URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.home
Success URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_home.process_signon
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : iforce
Authentication mode : Single Sign-On
Diagnostics completed successfully!
Disconnected from Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
nullVenu
Have you also upgraded your 9iAS instance to 1.0.2.2? The WPG_SESSION API error commonly appears when you are not using the lastest version of mod_plsql contained in 1.0.2.2.
See: Migration Guide for Oracle9iAS Solaris or NT/2000. -
Call to WPG_SESSION API Failed. Error-Code:6550
Can someone please help me figure out what I may be doing wrong? Using recent downloaded versions of 8i and 9iAS I cannot access Portal30 using IE5 browser. Please see error below. During portal configuration I specified connect string of oracle:1521:dba1. The connectstring entry of the DAD is dba1. I ran ssodatan. The database is open, listener is listening and SQL*Plus, DBA Studio, Net8 Assistant all connect to dba1 fine. Discussions mention cookies, upgrades, etc., but nothing definitive. Troubleshooting Guide does not reference error 6550. I am at a loss. Any suggestions would be appreciated.
I downloaded and installed 8.1.7 on NT host oracle then downloaded and installed 9iAS on another NT host. Portal Diagnostics are successful, however I get database login failed when attempting to use IE5 browser to access portal at http://oracle/pls/portal30/PORTAL30.home
Here's the diags:
D:\ora9ias\portal30\admin\plsql>set ORACLE_HOME=d:\ora9ias
D:\ora9ias\portal30\admin\plsql>diag -s portal30 -c dba1
Begining Portal Diagnostics
...portal_schema: portal30
...portal_password: *************
...portal_connect_string: dba1
Loading java class for Portal Diagnostics ...
SQL*Plus: Release 8.1.7.0.0 - Production on Wed Jul 25 08:41:58 2001
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Creating Table 'wwsec_diagnostic$'
Creating Sequence 'wwsec_diagnostic_seq'
Diagnostics Report v 1.01: Oracle Portal v 3.0.9.8.0
As of 25-Jul-2001 08:42:17 Schema Name: PORTAL30 SSO Schema Name: portal30
_sso
Proxy Server Settings:
HTTP Server:
HTTP Server Port:
No Proxy Servers for Domains beginning with:
URL Connection Time-Out (seconds):
PORTAL30.wwsec_enabler_config_info$
Login Server URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_app_admi
n.ls_login
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
Partner Application Information
**** The Login Server (portal30_sso) ****
Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
cess_signon
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
**** Oracle Portal (portal30) ****
Home URL : http://oracle/pls/portal30/portal30.home
Success URL : http://oracle/pls/portal30/portal30.wwsec_app_priv.process
_signon
DAD : portal30
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30
Connect string : dba1
Authentication mode : Single Sign-On
**** The Login Server (portal30_sso) ****
Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
cess_signon
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
Diagnostics completed successfully!
Disconnected from Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
D:\ora9ias\portal30\ admin\plsql>
Call to WPG_SESSION API Failed.
Error-Code:6550
Error TimeStamp:Wed, 25 Jul 2001 12:33:52 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
nullI met that error several times. Check TNS connection from web server box to database server, if applicable. - use tnsping.
That's the only cause that produces the error. If the web server box has more than one Oracle Home, find the correct one. Check $iAS_home/Apache/bin/apachectl script which will tell you its oracle home directory. It may not use $TNS_ADMIN/tnsnames.ora, but $ORACLE_HOME/network/admin/tnsnames.ora. -
Call to WPG_SESSION API fails with ORA-28231
Hello,
9ias 1.0.2.2.1 on SusSE 7.2 with 9.0.1 server.
When executing http://<server>:<port>/pls/portal30/portal30.home apache logs the error:
[warn] mod_plsql:Stale connection due to Oracle error 28231
[error] mod_plsql: /pls/portal30/portal30.home HTTP-503 ORA-28231 <B> Call to WPG_SESSION API failed.</B>
What is it that I can check here?
Note:173529.1 says:
Error: ORA-28231 (ORA-28231)
Text: no data passed to obfuscation toolkit
Cause: A NULL value was passed to a function or procedure.
Action: Make sure that the data passed is not empty.
Any pointers are greatly appreciated.
AnatoliyAt what point do you see this error?
e.g., On initial page request, or after login, etc.
Is there any more information in the error_log?
It looks like there's no data in the cookie when trying to decrypt it. -
Call to WPG_SESSION API Failed. Error-Code:20000
Hi,
to be short:
Oracle: 8.1.7.0.0
When trying to login to the portal application I got this error [bottom of message]
I downloaded the diag tool and run it against my configuration, everything was reported OK.
I've also searched all through this forum and have read similar problem, but nobody had error code 20000.
Would you please guide me?
Call to WPG_SESSION API Failed.
Error-Code:20000
Error TimeStamp:Thu, 29 Mar 2001 16:41:15 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
nullReza,
Is this a new install?
If so, on a new install, you often need to create an entry in the tnsnames.ora file within the Oracle9iAS $ORACLE_HOME. You can do this simply by copying the information from your tnsnames.ora in your Oracle 8.1.7 $ORACLE_HOME/network/admin.
A lot of times, it could also be a difference of Portal trying to connect to the database with:
ORA817.company.com
instead of
ORA817
or vice versa.
Check http://myhost.mydomain.com/pls/admin_/gateway.htm
In each DAD, it will specify the connect string that Portal is trying to use to connect with. Make sure your tnsnames.ora is using the same.
If this is not a new install, you may have just had a problem with the database. If this is not production, rather than debugging the problem connecting to the database. I have found that restarting the database and webserver usually works, that will at least get you back up and running. Then you can check the alert.log in the database for any problems or issues such as too many sessions, etc.
Thanks,
Sue -
Call to WPG_SESSION API Failed. Error-Code:20001
Here is the error I am getting while accessing portal. This error comes 2 out of 5 times.:
Call to WPG_SESSION API Failed.
Error-Code:20001
Error TimeStamp:Fri, 23 Mar 2001 17:28:33 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.The error code implies an invalid cookie. This could be because the encryption key is invalid or the format of the cookie is corrupted. If the encryption key was invalid, the error would happen all of the time rather than 2 times out of 5. The only way I can see that the cookie format would be bad is if it got truncated. There is a 4K limit on the size of the buffer that passes cookies around, so it could be that the browser is sending more than 4k worth of cookies. However, if this were the case, then the error would be consistent from that browser after you exceeded the limit. Can you give a little more detail on exactly what you are doing when the error occurs?
-
ORA-6550: CALL TO WPG_SESSION API FAILED.
Oracle Portal Release 2.
1) Logged into the Portal using orcladmin.
2) Created new schema called CMMS (had to use DEFAULT profile, ODSPSWDPROFILE would not allow schema to be created).
3) Created new user called CMMS through the ADMINISTER tab of portal design page.
4) Create new DAD called cmms_portal using Oracle Enterprise Manager on port 1810. Entered username CMMS, the password and the connection string.
5) Restarted HTTP server.
DOES NOT WORK!!!
Verified that the user CMMS is entered into the Oracle Internet Directory. Can log into CMMS through single sign-on.
Can log into CMMS schema using SQL*PLUS.
Reset user profile from DEFAULT to ODSPSWDPROFILE.
Verified connection string to that of orasso and portal in the $ORACLE_HOME/Apache/modplsql/conf/dads.conf file was the same
STILL DOES NOT WORK
Shutdown the mid-tier and the infrastructure and rebooted the server
STILL DIDN'T WORK
Able to connect to via SqlPlus.Scott,
Thanks for your reply. I double check instruction and re-done all steps. I try to start demo application (I didn't even go further tneh step 4 in Install.txt!)
from ...\ssosdk307_032101\demo\plsql\Readme.txt 5. To verify the web server setup, go to the following URL to see the test page:
http://<hostname>:<port>/pls/<dad_name>/<schema_name>.test_setup
, but I receive the same error messages in IE and in Apache error_logs.
I see at this point one weak area - this is DAD. As I understand I need to create dad in dads.conf, am I right?
Maybe I didn't created it right?
Could you post some working dad for SingleSignOn?
Thanks,
Sergiy -
Call to WPG_SESSION API w/6509
All,
I received this error as I was upgrading the
Portal DB from 8.1.6.0 to 8.1.6.1. ORA-06509
indicates that a non-SYS user owns SYS objects. On doing a query, PORTAL30 seems to
contain a whole bunch objects V$ views, DBMS* etc that SYS ought to be owning and that other users access via synonyms.
Metalink recommends dropping these objects (from the non-SYS user's schema).
I would like to know how this happened in the
first place ? Has anyone else experienced this ?
Thanks
SanjayI also have faced the same errors while upgrading DB from 8.1.6 to 8.1.7. The real problem was the newer version has make many objects in portal and login schema invalid. You can check their status and if they are invalid then recompile all the objects again.
Try this out....
null -
hello
I am running an interface RFC2WS sync and recieve this message in the RFC. the message does not get out of the XI and rich the target (WS).
the XI been upgraded lately, and I think this might be the cuase to the problem, becuase the interface been worked before, and still working in PROD environment as is.
what could be the problem and how can I start investigate it to find the problem?
this is what the SAP recieves
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
Thanks
KfirHi Kfir,
just check in RWB, in component monitoring, the status of integration server and adapter engine.......if it is red, then ask your basis guys to remove that error................just check your comm channels, i think your comm channels are in error, if they are just edit them, save and activate them again..........i think then your this issue will be resolved.'
Regards,
Rajeev Gupta -
Hello XI guru,
I am configuring RFC to File scneario where i am using BAPI as Source. When i run this BAPI in se37 it gives me short dump stating "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
Please help.
Also I want to know is it necessary to write wrapper for BAPI before configuring. This bapi list all orders created in SCM system.
awaiting ur advises and help
Thanx
AnuHello guys,
I am sorry but kind of confuse, please be with me.
I have RFC with following structure:
'Z_BAPI_MOSRVAPS_GETLIST2'
importing parameters
LOGICAL_SYSTEM = T_LOGICAL_SYSTEM
START_TIME = T_START_TIME
TABLES
PRODUCT_SELECTION = T_PRODUCT_SELECTION
LOCATION_SELECTION = T_LOCATION_SELECTION
LOCTYPE_SELECTION = T_LOCTYPE_SELECTION
ORDER_HEADS = T_ORDER_HEADS
OUTPUT_NODES = T_OUTPUT_NODES.
I put values in logical system/start_time/
product_selection/location_selection/loctype_selection
based on these values order_heads and output_nodes is populated. I want value of these to tables to be sent as file.
Data structure for file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
- <ORDER_HEADS>
- <ITEM>
<ORDER_NUMBER />
<ORDER_TYPE />
</ITEM>
</ORDER_HEADS>
- <OUTPUT_NODES>
- <ITEM>
<MASTER_PRODUCT />
<MASTER_PLANT />
</ITEM>
</OUTPUT_NODES>
</ns0:ORDER_MT>
But the payload has value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
remaining is not seen in sxmb_moni and payload cannot be read error is given.
file structure is dummy structure, please tell me know if it is right or i need to change.
Thanx
Anu -
MS CRM 2015 :DB locking issues while calling a web API inside an asynchronous Plugin.
Hi,
We have a SharePoint Integration where a Web API is deployed on SharePoint Server.We are calling this Web API in asynchronous plugin. Although the Plugin works fine. But its causing DB issues .other custom applications like schedulers are breaking
and showing time-out issues.
I analysed it and found that Web API sometime failed to instantiate the Proxy object ( Exception ::System.Net.WebException: The operation has timed out ).
This results into the exception in plugin OR cause of DB locking.
Kindly suggest how to resolve this issue.
Thanks,
If you find this post helpful then please "Vote as Helpful" and "Mark As Answer". Thanks and Regards, Mohammad Yusuf Ansari
http://microxrm.blogspot.inianp123,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
CSD_RULE_MATCH_FAILED-calling service request api from oracle apps adapter
We are doing integration between Siebel and Oracle Apps. When a service request is created on Siebel we are passing that in Oracle Apps using Oracle Apps adapter which is calling a custom API which is doing all the validations and in turn is calling a public api for service request creation. There are two types of service requests - Field Service and Depot Repair. For Field Service we are able to successfully insert the data on Oracle Apps, but for Depot Repair we are getting an error 'CSD CSD_RULE_MATCH_FAILED' from the standard API.
We have checked the setup and found it is proper. We invoked the pl/sql API from sql developer and we are able to insert the data. So we are facing this issue only when calling the api from oracle apps adapter.
In the invoke call we have set these properties -
jca.apps.RespApplication
jca.apps.Responsibility
jca.apps.Username
Based on our analysis till now it is looking like a security context setup issue, but we are not really sure what properties to set.
Any help in getting this through will be greatly appreciated.
Thanks,
ShantanuHi Vijay,
We have created the apps adapter with default settings as 'apps' user and set the properties Responsibility, RespApplication, Username of <invoke>. Other than that no other settings has been changed.
Are we missing anything?
This adapter is able to hit the database in case of 'Field Service' but it is failing for 'Depot Repair'.
Edited by: 927382 on Apr 13, 2012 2:19 AM -
Error: call to messaging system failed
Hi all,
i'm facing this error in a RFC type Communication Channel for every message.
"Error in processing caused by: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.MessageExpiredException: No response available. caused by: com.sap.aii.af.ra.ms.api.MessageExpiredException: No response available."
Entering the message i got that log:
"Audit Log for Message: 7e223c81-7c6c-11e0-a692-000c292557a5
Time Stamp Status Description
2011-05-12 09:50:23 Success RFC adapter received sRFC for ZXI_GROUNDWORK_START from SM7/100. Attempting to send message synchronously
2011-05-12 09:50:23 Success MP: Entering module processor
2011-05-12 09:50:23 Success MP: Processing local module localejbs/RfcAFBean
2011-05-12 09:50:23 Success Application attempting to send an XI message synchronously using connection RFC_http://sap.com/xi/XI/System.
2011-05-12 09:50:23 Success Trying to put the message into the call queue.
2011-05-12 09:50:23 Success Message successfully put into the queue.
2011-05-12 09:50:23 Success The message was successfully retrieved from the call queue.
2011-05-12 09:50:23 Success The message status set to DLNG.
2011-05-12 09:55:23 Error Transmitting the message using connection http://sxsixi118:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.MessageExpiredException: No response available..
2011-05-12 09:55:23 Error The message status set to FAIL."
Can someone help me i've already verified it's not a timeout problem cause i've increased the timeout to 15 minutes without success.
Thanks in advance.
DanieleNo because i didn't create the scenario and i've to resolve the problem
The log of the message is
"Audit Log for Message: 8e36e2b0-7ca3-11e0-9945-000c292557a5
Time Stamp Status Description
2011-05-12 16:24:32 Success RFC adapter received sRFC for ZXI_GROUNDWORK_START from SM7/100. Attempting to send message synchronously
2011-05-12 16:24:32 Success MP: Entering module processor
2011-05-12 16:24:32 Success MP: Processing local module localejbs/RfcAFBean
2011-05-12 16:24:32 Success Application attempting to send an XI message synchronously using connection RFC_http://sap.com/xi/XI/System.
2011-05-12 16:24:32 Success Trying to put the message into the call queue.
2011-05-12 16:24:32 Success Message successfully put into the queue.
2011-05-12 16:24:32 Success The message was successfully retrieved from the call queue.
2011-05-12 16:24:32 Success The message status set to DLNG.
2011-05-12 16:34:34 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Timeout.
2011-05-12 16:34:34 Error Transmitting the message using connection http://sxsixi118:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout." -
Internal Error occurred while calling the ProcessDPCommands API
We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous] -
Creating a service call using DI API
Hi all,
I have written code to connect to businessone.It is connecting.But after that the error is coming....
code written is.....
String c="C40001";
getConnection();
System.out.println("Connected");
IDocuments objServiceCall=SBOCOMUtil.newDocuments(company,SBOCOMConstants.BoObjectTypes_oServiceCalls);
objServiceCall.setCardCode(c);
objServiceCall.setDocDate(new Date());
int i=objServiceCall.add();
String callId=company.getNewObjectKey();
Error:
com.sap.smb.sbo.wrapper.com.ComFailException: Invoke of: GetBusinessObject
Source: SAPbobsCOM.Company.6.7
Description: You are not connected to a company
at com.sap.smb.sbo.wrapper.com.Dispatch.invokev(Native Method)
at com.sap.smb.sbo.wrapper.com.Dispatch.invokev(Unknown Source)
at com.sap.smb.sbo.wrapper.com.Dispatch.callN(Unknown Source)
at com.sap.smb.sbo.wrapper.com.Dispatch.call(Unknown Source)
at com.sap.smb.sbo.api.Company.getBusinessObject(Unknown Source)
at com.sap.smb.sbo.api.SBOCOMUtil.newDocuments(Unknown Source)
at in.mobileone.www.b1.CreateServiceCall.main(CreateServiceCall.java:35)
Exception in thread "main"
Is it the correct approach or not.
any one guide me in this issue.
Thanks&Regards
MadhuHi Gianluigi,
What you said is correct.At that time my system has some problem with businessone.Now the company object is creating.But the error is showing at
the line of code....
objServiceCall.setCardCode("C40001");
no mapping found for cardcode...
Is the above send code is correct? or there is another way to approach to create a service call through DI API.
Thanks
Madhu
Maybe you are looking for
-
Create a dvd from scan photos on iMac
Is it possible to create a movie on (DVD) from scan photos? And will it be compatible to play on a PC?
-
Customer Mss Upload with non ENGLISH language
Hi, I have a BDC program which uploads customer Address data into the system. Now I have some customer data with non english characters like chinese and Japanese. If I try to upload this data with english language LOGON then data doesnt updates corre
-
Cd/DVD drive not listed anywhere.
I do not have the dvd/cd drive listed in the device manager. the drive spools up and acts like it is reading.
-
Dear all, When i am trying to edit specification data for a substance I am not finding any values in value assignments under physical chemical properties . What I am I missing ? Regards, Rajaram.K
-
SAP Standard screen modification and logic
Hi All, I have four tab strips in my standard selection screen. in the second , third and fourth tabs i need to add same fileds for exampls surgery tab optable procudere code procudure category (standard functionality)