Call Together between 2 PAP2T

Please hep me. I like to make a call between 2 PAP2T. One is in VN and another one is in Canada . How can I do it ? If can,please send your help to my email [email protected]
Thank you.

In order to use the adapter you need to connect to a server. The server is usually provided by your VoIP provider. If you do not have a voip provider then you need to sign up with one. So does the other person.
Think about it like this. You have the telephone and the phone jack. But until you get phone service from the phone company, you can't make or receive phone calls.

Similar Messages

  • TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

    I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

    Each device needs a separate address. Use an email address (gmail.com) on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • Call alternating between earpiece and loudspeaker

    I have a Sony Z1The last few days when i answer a call I will start the call using the ear speaker (phone held to ear) however after a while the phone begins to alternate between the ear speaker and the loudspeaker and eventually after about 15 seconds i just have to end the call.  I don't know if it was an app update on the phone or my SW3 update that is causing the issue.
    I have tried clearing a few apps but that does not seem to have helped.
    Now not sure if linked but i have a new set of Sony Bluetooth earphones also that sometimes starts and stops when playing music.  I thought it might have beenthe earphone battery going flat but it was doing it also when fully charged.
    Anyone had similar?  I have seen the post where calls go directly to loudspeaker but i thought this was different.

    Started to happen again today however the cache was empty. This time however the call alternated between all the options (earpiece, speaker and headphones). I conducted a factory reset and it still occurred. I am now stuck for answers.
    Another issue I am getting at the same time is my wifi disconnects and says ' temporarily avoiding poor signal ' when the signal in the wifi section shows full wifi signal?
    UPDATE;
    I had been getting notifications in the notification bar that 'Smart Connect' had headset connected when there was definetly no headset connected.  During a call it was again alternating between the different options of earpiece, headset and bluetooth.  I subsequently uninstalled allupdates for Smart connect, but i still had call issues.  I have now disabled smart connect and will wait to see if this solves the issue.  I am now hopeful that this is the problem.  Next would be to find out if it is a software or hardware issue.

  • How does the ADF support romote call method between two managed server ?

    How does the ADF support romote call method between two managed server ?

    You would usually use this as a WebService through the WSDL that is exposed.
    JDeveloper can help you create a Java Proxy to call the Web service if you point it to the WSDL file that was generated for your AM.
    Some other samples here:
    http://www.connotea.org/user/jdeveloper/tag/Service%20Interface

  • Is 3g video call possible between Iphone4 & Nokia E71?

    s 3g video call possible between Iphone4 & Nokia E71? Without internet connection, just through local network provider? If yes, how to set-up? Thanks in advance.

    Right. That's old firmware. Have you tried updating it?
    http://europe.nokia.com/softwareupdate
    If no update is available then you most likely have a branded phone:
    http://linux.sgms-centre.com/nokiafaq/branded-phones/
    If this is the case, pressure your operator for an update.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Excel activex call changes between Office 2000 and Office XP. How does one manage that?

    I have several Active X calls from within a VI. One in particular is
    the Excel Cell Value property node in Office 2000. MS has decided to
    call it Excel Cell Value2 in Office XP.
    I have built and exe on a machine with Office 2000 and can run the code
    on a machine with Office XP, but I can not build on the machine with
    Office XP. I can also run a VI with that call
    on the Office XP box, but if I mass compile the VI I get the broken arrow.
    I guess I am confuesed as to why it can run but not compile. If the
    ActiveX call is not there for the compile why is it there for the run?
    If I can expect this does it work in reverse where I
    build on an Office XP box and run on a Office 2000 box?

    These problems you are experiencing do stem from the ActiveX changes between Excel versions.  When you mass compile LabVIEW checks to see if everything is linked correctly, including ActiveX portions of your code.  Since there are slight changes the LabVIEW compiler detects something is wrong, but cannot isolate the problem.  You might need to force a recompile of that VI.  Check out this link.
    http://digital.ni.com/public.nsf/websearch/50D06DEE8B9DC018862565A0006742F2?OpenDocument
    Hope this helps!
    Andy F.
    National Instruments

  • Unity UM 'unidentified caller' problem between Unity servers

    Team,
    We are simulating a clients UM setup using Unity 4.0(5) befor we migrate everything to Unity 7.0(2) and CUCM 7.1(3).
    We setup 2 Unity servers in different locations in one AD domain. Each location also has its own Exchange 2003 servers which the Unity servers are pointing to as its message store. We are also integrating with one CCM cluster 4.1(3). VMO is also enabled on users Outlook.
    Sending voicemail messages between users within the Unity servers works fine. Users are able to see the sendees name on the email message and Live reply is functioning.
    However, sending voicemail messages accross Unity servers have some issues. Users are seeing the messages as coming from the Unity server itself and not from the user who sent it. The email header would like this:
         From:      Unity Messaging System - [server-name]
         To:          [user-name]
         Subject:     Message from an unidentified caller ([caller-extn-number])
    The media message would play just fine. But live reply is not possible.
    Using the Call Viewer, the number being displayed are correct while the call is in progress.
    Did some checking using CUDLE and both Unity servers have all the subscribers extensions on DTMFAccessID table and on the GlobalSubscriber table all the users from both Unity are there.
    Anybody from the forum have encountered this before?
    Appreciate it if somebody can share some thoughts on how to solve this problem.
    Thanks and kind regards,
    Neil

    Have you configured digital networking between the 2 Unity systems?  To me, what you are describing makes sense.  You have 2 separate systems.  Unity knows about items that belong or are associated to it (i.e., your intra-system communication works as desired).  But, it does not know about information (other than calling info) related to the separate system.  My first suggestion would be to read up on digital networking - doesn't require any additional licensing as it's Unity to Unity...in other words, VPIM isn't a concern here.

  • Calling function between subprojects and DLL in WINCE7

    We inherit a project develop using Platform Builder with WINCE7 and Visual Studio 2008. The project has a BSP, 5 sub-projects and a DLL. The problem is that when we add a function to the DLL Data Manager and try to call the new function from any of the subproject
    using an Data Manager object that is currently used in the subproject to call other functions on the Data Manager DLL, we get the following error:"Error 107 Configuration_Setting_Mapper.obj : error LNK2019: unresolved external symbol "public: void
    __cdecl Data_Manager::Configuration_Manager::Set_Default_TEST(void)" (?Set_Default_TEST@Configuration_Manager@Data_Manager@@QAAXXZ) referenced in function "public: bool __cdecl Configuration_Setting_Mapper::Set_UserName_Default(void)" (?Set_UserName_Default@Configuration_Setting_Mapper@@QAA_NXZ)
    Same error is received when we try to change the return type of any of the functions in the Data Manager DLL. Do we have to set a link between the Data Manager and the subproject? What could be missing?

    So the import library for the DLL needs to be updated (with the new function which you are exporting). Otherwise, it's as though you installed a new version of desktop Windows with new capabilities but used the old API libraries; your code won't link because
    the API library *you are using* doesn't match the DLL you want to call.
    Since your code compiles, you're obviously using the new header file(s).
    So, what to do? Without seeing the projects and understanding how the original structure was intended to work, I'm not sure we can say. You may be linking with a library in the SDK folder but not regenerating that library when the DLL changes, or you may
    not be generating a new import library when rebuilding the DLL.
    Paul T.

  • CUCM 8.6 call busy between SIP phones and thirdparty phones

    Hi Everybody,
    I have the following error on my logs:
    Invalid Disconnect Cause(cause=47), No Reason Header Appended
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getXCiscoViPRFallbackIDAndDTMFKey: Device type 8, Pstn Fallback is not enabled|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefCcRegister: Secure status=1, mSrtpPresent=0|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/compareAndUpdateMedia: sdpStatus=0, CMEndPointSDP role=1, SIPEndPointSdpRole=2|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefCcRegister: Secure status=1, mSrtpPresent=0|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPUACSessionExpires: isMidCall[0], response[200], method[102]|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/parseSessionExpires: refresh_interval[1800], refresher[uas]|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/setSIPSessionExpiresTimer: interval[1768] secs|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSecureRec: enforce srtp flag: 0, remote end srtp support: 0|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/updateCNToCC: identityCngFlag[0x1f], isConnInfoInd[1], ccContactHeader[]|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPConnectInd: Exit with state = outCall_200Rcvd|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPConnectInd: Exit with state = outCall_200Rcvd|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/setSIPUpdateFlags: mIsUpdateForSignalingAllowed = 1  mIsUpdateForMediaAllowed = 1  mPendingOutgoingUpdate = 0|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/appendReasonHdr: appendReasonHdr - Invalid Disconnect Cause(cause=47), No Reason Header Appended|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/addTransparencyInfo: attaching transparency object|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/appendRPIDHdrForOriginalCalledParty: SIP device does not Support Orig Dialled Phone nego: 0|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefAe: SIPCdpc=281707, nodeId=3, processNumber=73  ci=144600614, branch=0|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |MRM::waiting_MrmDeallocateMtpResourceReq- Deallocate received for CI=53993831 count=0|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |MRM::waiting_DeallocateMtpResourceReq- ERROR  Deallocate received for an unknown Call Identifier  Ci = 53993831|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_DISCONNECT value=500 retries=10|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_start_timer: type=SIP_TIMER_DISCONNECT value=500 retries=10|3,100,63,1.36454459^192.168.0.15^*
    14:46:50.098 |//SIP/SIPUdp/wait_SdlSPISignal: Outgoing SIP UDP message to 192.168.0.15:[5060]:
    the calling number is 34967850938
    the callied number is 19026

    Julien,
    Please use the link be low to collect cucm traces and use the advanced editor on the forum (located on top right hand corner of the discussion widnow) to attach the trace
    https://supportforums.cisco.com/docs/DOC-29901
    Ensure you collect the trace from the folowing
    1. the server that the phone is registered to
    2. If this server is different from the server in the cucm group of the sip trunk, then you need to also collect traces from the server (s) in the cucm group assiged to the sip trunk that connects to the 3rd party cluster...
    NB: If you have three servers in the cucm group of the sip trunk, you have to collect the trace from all three servers. This is because calls are dsitributed in a round robin fashion to servers in a sip trunk...
    FInally before you send the trace over, please ensure the calling and called numbers are present. Also include the time of the test call
    Please rate all useful posts
    "opportunity is a haughty goddess who waste no time with those who are unprepared"

  • Problem with call-offs between APO and R/3 system

    Hi, gurus.
    We have following problem:
    APO system receives DELINS idocs. They are processed correctly (status 53). But sometimes the call-offs in R/3 system are not updated. I do not know much about the underlaying process but how can I check where the problem is?
    I suppose it can be caused by blocking of particular material or order or whatever in R/3 system when the call-off is being processed. But then the system should give some warning. I need to know where it could be found.
    The only workaround at the moment we do is to create copies of DELINS in APO system and let them be processed.by APO and consequently by R/3 system.
    Thank you.
    Stano Letko

    Hi Stano,
    When ever IDOC fail you can trigger a workflow to the respective person through Partner profile and message type setting .(we20) as Post processing permitted agent .
    Get in touch with techincal person who have idea of  IDOC configuration.
    Message type : DELINS
    Partner number : XXX
    Workflow tcode : PPOSE
    Manish

  • Call functions between classes

    Hi all,
    I have two java classes compiled into the DB in different schemas. How could I call the static method in classA from classB?
    I suppose I need to get the schema name in there somehow, or is it just as simple as classA.method(arg1)
    havent dared trying yet ;)

    You need to change the resolver of the referencing class to include the schema of the referenced class.
    When a class is created, whether directly by create java ddl or by loadjava it has an attribute known as a resolver which is essentially a search path for schemas to look in when resolving names referenced in the class. The resolver is a list of pairs of the form ((<pattern> <schema name>)(<pattern> <schema name>)...). When the class is resolved any name X that it references is bound to a class object by iterating over the resolver from left to right identifying each term in which the name of X matches the pattern and looking to see whether a class with the name of X exists in the schema identified by the term. If such a class exists, the search stops and the name X is bound to that class. If after looking at all the terms there is no class found, then a resolution error occurs. The pattern can either be an explicit name, or an explicit prefix followed by '*' or simply '*'. The latter is the usual pattern used, and matches any name. The default resolver given when a class is created without explicitly specifying an alternate resolver is ((* <current schema>)(* PUBLIC)). A class with this resolver will be able to resolve names in its own schema or in PUBLIC. In your case you want the referencing class to have a resolver like
    ((* <current schema>)(* <the other schema>)(* PUBLIC))
    or some variation on this. An alternate resolver can be specified in loadjava using the -resolver argument, or in create or alter java ddl using the
    resolver ((...)...) syntax. This is all documented in the java developers guide.

  • GetDefinitionByName() error when calling class between modules

    i have a main application which loads two modules - lets call them x and y.
    module x has a class called dataObject. i have made a dummy instance of this class in module x.
    in module y, i have the following code:
    flash.utils.getDefinitionByName( 'dataObject' )
    the main app loads both module x and y successfully in seperate child domains BEFORE calling the line above.
    i am getting a variable 'dataObject' is not defined error.
    i know the reason why this error occurs under normal single-app circumstances. however, i could not find any posts relating to this error when dealing with multiple modules loaded dynamically. i have tried loading both modules in the same domain as the main app but still no luck.
    any help appreciated!
    thanks!

    i looked it at a cursory level.
    basically, the class that you want the definition for needs to either be in the module app domain loading it or its parent app domain? in my case it is in a seperate child app domain of the parent, which is why it can't be found.. am i right?
    however, this forces me to put the module containing the class in the same app domain as the main app. is there a way i can get the definition of the class regardless of what app domain it is in (assuming it is in the same security domain, however) ?
    thanks!

  • PSTN call transferring between sites

    We are planning on having 2 sites
    Site A: Main Lync server with mediation/frontend roles. Edge server. SIP trunk
    Site B: SBA with PRI
    Sites are to be connected with a VPN
    We will have users at Site A that will take a call on the PSTN and need to be able to transfer that call to users at Site B. Site B has no receptionist, their receptionist is at Site A.
    My initial plan was to have every users line uri set up with the phone number and extension, no DIDs. Site A could be tel:+19997654321;ext=1000 and Site B could be tel:+19991234567;ext=2000.
    My question is what is the call path for transferring when a call comes in on Site A PSTN -> Site A User -> Site B User?
    Will this call flow through the VPN to Site B from Site A and be using up one of the SIP trunks for the duration?
    What happens if I make users at Site B have DIDs instead of extensions for their line uri? Could the call be transferred to the PRI and not have to flow through the VPN?

    Hi kuptzlocher,
    Have a look at the following picture.
    Based on my understanding, if the number was already in a globally unique format (E.164), then Reverse number lookup will query it :
    Is this number assigned to anything in Lync? If it is, then Lync will be able to translate the number to a SIP URI and route the call directly to inbound routing based on said URI where the process will then end.(In other words, it
    will through the VPN)
    Best regards,
    Eric

  • Move call credit between two Skype accounts, both ...

    Hi, I'm looking to move call credit from one Skype account/profile to another
    account/profile, both held by me.
    Can I do that? If so, can someone explain how to do it in a brief step-by-step guide
    Thanks,
    Best,
    Jonas

    StAndrews15 wrote:
    Can I do that?
    Hello and welcome to the Skype Community.
    Unfortunately you can't but you can request a refund and then credit the funds to your preferred account.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Called id between avaya to cucm

    Hi guys
    need quick assistance here:
    i m using cucm manager 9.1.2-11900  and connect threw h323 trunk to avaya ip office
    extansion in avaya ip office 7XX
    cisco extansion 48XX
    what i m try to do is ,when 7xx (avaya) call to 48xx (cisco) i want that the cucm manager will add the prefix 5 to extansion 7xx
    so when i recive calls to 48xx from 7xx ,i will c on my phone display 57xx
    i try whithout success
    tk
    shoham

    Hello Shoham,
    Were you able to resolve the issue?
    If not, did you try calling party transformation and then apply it to the the trunk?

Maybe you are looking for