Call transaction from RFC?

Hi Experts,
I need to call Different transactions from a RFC.
I am looking for different approaches to achieve this.
One Idea is RFC will take input parameters as
-Transaction name
-Field names to be updated with its values (as a table)
Now in RFC, it should be able to update this transactionu2019s fields with the values provided in table parameter.
RFC will fill up the BDC table with the needed data, and will call the needed transaction to update the data.
Once the execution is complete, RFC will send back the different messages (error, info, and warning) through Table parameter.
Now, I do not have much of ABAP experience so I need your help in following
1)     Should I use BDC recording in RFC?
2)     Can BDC send back all the messages encountered while calling the transaction?
3)     Is there any other way to approach this requirement?
Thank you in advance.
Regards,
Ashish Shah

Hi Amitava,
This RFC might be called from any WebBased application , like Portal , Visual Composer or WebDynpro for Java.
One more idea , may be an extension to my current idea is:
To add one more input parameter to RFC, a table with single field of type string.
Populate this table with entire BDC recording for one particular transaction, and pass it as an input parameter of RFC.
Once in RFC , this BDC recording can be used to populate BDC table and then pass this table to call transaction statement.
Do you see any sense in this logic?
Regards,
Ashish Shah

Similar Messages

Calling Transaction from other system using RFC

Hi ,
I have one button on screen(say Screen-A), in ECC. when its pressed the transaction '/SAPAPO/BOPIN' gets called from APO.
For calling transaction from APO I am using FM - 'ABAP4_CALL_TRANSACTION'.
I want the initial screen of that transaction to retain some values which I fill on the Screen-A(the screen which has that button).
When I call the transaction from ECC itself (ex. C006), the initial screen of C006 retains the value on Screen-A.
I want the same to happen in case of calling transaction from APO.
How to achieve this? Would it need the changes in IMG (SPRO)?
Please note that, Screen-A is initial screen of transaction 'md05' and I want to retain vaules of Material, MRP Area, Plant.
Thanks,
Sujeet

Builld a RFC enabled FM () that wrap the call of Smartforms (*) in the other system.
Regards,
Raymond
(*) [Writing Remote Function Modules in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/22/0425f2488911d189490000e829fbbd/content.htm]
(**) [Integrating the Smart Form into the Application|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm]

Call Transaction Through RFC

Hi ,
I am trying to do a call transaction through RFC call from a Middleware which is a CPIC user (only communication Non dialog User ) .
Call transaction does gets executed without any error but it does not update any data.But when I run it through my user id it works absolutely fine .
I am not sure what is causing the issue
Security authorization?
RFC through Non Dialog user ?
Paramters missing in RFC ?
Paramatertes missing in call transaction option?
If anyone of you has faced a similiar issue then please let me know the path forward.
Thanks
Vikas

Hi Vikas,
The problem is in Authorization? And check the mode of Process Synchoronus or asynchoronous? Both the RFC and CALL transaction should be Same /
Thanks
MAnju

Want to call transactions from ALV list output

Hi Guru's,
I have a report which displays Open PR's, open PO's n their details with respect to material. wat i want to do is call transactions from this out put i.e i want a interactive output. if i click on particular PR i want the system to call that PR screen. how can i do this?? Plz help.

REFER THIS
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = 'USER_COMMAND '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
IT_FIELDCAT                    =
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
TABLES
    T_OUTTAB                       =
IF SY-SUBRC <> 0.
ENDIF.
AND THEN
                 rs_lineinfo type slis_lineinfo.
FORM user_command5 USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
data : lv_date type char4.
CLEAR : LV_DATE .
CASE r_ucomm.
WHEN '&IC1'.
      IF rs_selfield-fieldname = 'BELNR'.
    read table it_e into wa_e index rs_selfield-tabindex.
    if sy-subrc = 0.
    lv_date = wa_e-budat(4).
    endif.
    SET PARAMETER ID 'BLN' FIELD rs_selfield-value.
    SET PARAMETER ID 'BUK' FIELD s_bukrs-low.
    SET PARAMETER ID 'GJR' FIELD lv_date.
    call TRANsaction 'FB03' AND SKIP FIRST SCREEN.
    endif.
    ENDCASE.
ENDFORM. "user_comm

Can we call report from rfc.

Hi All,
Can we call report from rfc.
if it is possible please tell me the process.
i know the process to call rfc from report and from rfc.
but i dont know how to call report from rfc FM.
Thank you.

HI
you call report from rfc.
but you have to write the logic for that..
ex: 1st of all you have to create the fm in target system
then you have to call that fm using that rfc
and then you can call the report form the target system.

ESS throwing error while calling transaction from R/3

Whenever u try to pull certain I-view like under ESS > Income tax provisional statement then the portal throws below mentioned error. Portal is not able to call transactions from R/3.
Error:
The requested URL could not be retrieved
While trying to retrieve the URL: http://dev.mglep.com:26000/sap(ZT0yZElaRG5xNDlZdFF4aGcyTDhzMWxRLS1hVUR5bDBMbjBDZ2hWUUcyMlZmcmlBLS0=)/bc/gui/sap/its/webgui?
The following error was encountered:
Connection to 69.43.161.156 Failed
The system returned:
(111) Connection refusedThe remote host or network may be down. Please try the request again.
Your cache administrator is root.
Please help

Hi,
Please check the parameters that has been defined in SICF for the transaction you are using.
With Regards,
Kaustuv Goswami.

How to get a message from call transaction in RFC call

Hello :
I would like to ask one favor i make a 2 call transaction in a RFC funtion when i make the first CALL TRANSACTION using te next statement.
    CALL TRANSACTION 'F-43'
      USING bdcdata MESSAGES INTO messtab2 OPTIONS FROM l_fromopt.
I recive the number of the document in the field sy-msgv1 from the message table messtab2 , then i make the second CALL TRANSACTION and i am waiting to get the other number of the document from the table messtab3 using the next statatement.
     CALL TRANSACTION 'FIBLFFP'
        USING bdcdata MESSAGES INTO messtab3 OPTIONS FROM l_fromopt. but now the table messtab3 don't send the number of document , and i need to get the number of this document for making a REFERENCE.
thanks a lot for you help

FORM bdc_transaction USING tcode TYPE tcode.
DATA: l_mstring(480).
DATA: l_subrc TYPE sy-subrc,
        lwa_t100 TYPE t100.
DATA : gv_ctumode TYPE ctu_params-dismode VALUE 'A'.
call transaction using
BREAK-POINT.
REFRESH gt_messtab.
CLEAR gwa_messtab.
gv_ctumode = gc_ctumode.
CALL TRANSACTION tcode USING gi_bdcdata                "#EC CI_CALLTA
                   MODE   gv_ctumode
                   UPDATE gc_cupdate
                   MESSAGES INTO gt_messtab.
l_subrc = sy-subrc.
IF sy-subrc <> 0.
    WRITE: / 'CALL_TRANSACTION',
             tcode,
             'returncode:',
             l_subrc,
             'RECORD:',
             sy-index.
    LOOP AT gt_messtab INTO gwa_messtab.
      CLEAR lwa_t100.
      SELECT SINGLE * FROM t100 INTO lwa_t100 WHERE sprsl = gwa_messtab-msgspra
                                AND            arbgb = gwa_messtab-msgid
                                AND            msgnr = gwa_messtab-msgnr.
      IF sy-subrc = 0.
        l_mstring = lwa_t100-text.
        IF l_mstring CS '&1'.
          REPLACE '&1' WITH gwa_messtab-msgv1 INTO l_mstring.
          REPLACE '&2' WITH gwa_messtab-msgv2 INTO l_mstring.
          REPLACE '&3' WITH gwa_messtab-msgv3 INTO l_mstring.
          REPLACE '&4' WITH gwa_messtab-msgv4 INTO l_mstring.
        ELSE.
          REPLACE '&' WITH gwa_messtab-msgv1 INTO l_mstring.
          REPLACE '&' WITH gwa_messtab-msgv2 INTO l_mstring.
          REPLACE '&' WITH gwa_messtab-msgv3 INTO l_mstring.
          REPLACE '&' WITH gwa_messtab-msgv4 INTO l_mstring.
        ENDIF.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = gwa_messtab-msgid
            lang      = sy-langu
            no        = gwa_messtab-msgnr
            v1        = gwa_messtab-msgv1
            v2        = gwa_messtab-msgv2
            v3        = gwa_messtab-msgv3
            v4        = gwa_messtab-msgv4
          IMPORTING
            msg       = l_mstring
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CONDENSE l_mstring.
        IF NOT l_mstring IS INITIAL.
          WRITE: / gwa_messtab-msgtyp, l_mstring(250).
          MESSAGE l_mstring TYPE 'I'.
        ENDIF.
      ELSE.
        WRITE: / gwa_messtab.
      ENDIF.
    ENDLOOP.
    SKIP.
ENDIF.

Call transaction from jco

Hi,
I'm trying to call a transaction from jco. It is successful till a point - transaction actually start but there is not way to read the resulting screen. Is it possible to achieve this at all?
Here is a little snippet:
                JCoFunction function = destination.getRepository().getFunction("ABAP4_CALL_TRANSACTION");
          JCoRecordMetaData usingTabMeta = function.getFunctionTemplate().getFunctionInterface().getRecordMetaData("USING_TAB");
          JCoTable usingTab = JCo.createTable(usingTabMeta);
          JCoRecordMetaData spagpaTabMeta = function.getFunctionTemplate().getFunctionInterface().getRecordMetaData("SPAGPA_TAB");
          JCoTable spagpaTab = JCo.createTable(spagpaTabMeta);
          JCoRecordMetaData messTabMeta = function.getFunctionTemplate().getFunctionInterface().getRecordMetaData("MESS_TAB");
          JCoTable messTab = JCo.createTable(messTabMeta);
          function.getImportParameterList().setValue("SKIP_SCREEN", 'X');
          function.getImportParameterList().setValue("MODE_VAL", 'E');
          function.getImportParameterList().setValue("UPDATE_VAL", 'A');
          function.getImportParameterList().setValue("TCODE", name);
          function.getTableParameterList().setValue("USING_TAB", usingTab);
          function.getTableParameterList().setValue("SPAGPA_TAB", spagpaTab);
          function.getTableParameterList().setValue("MESS_TAB", messTab);
          try {
               function.execute(destination);
          } catch (AbapException e) {
               System.out.println(e.toString());
               return;

Hi,
as far as I know, the problem is that the JCo cannot handle UI elements which are sent back as a response. Only responses of type RFCs are handled and any UI elements (which are to be rendered by the SAP GUI, which interestingly acts as a server) are not processed by the Java Connector. This is why you don't see the screen.
I would have actually expected that you get an error from JCo, I find it strange that you say that the transaction is actually started. Are you sure? How do you know?
T00th

Calling LSMW from RFC

Hello, everyone.
This is my first post, so i hope i'm doing it right.
I'm using Transaction LSMW to create mass vendors with this input parameters:
Project: FI
Subproject: AP
Object: VENDOR_02
It works fine, with the standar steps and a plain text file.
What i'm asked to do is create a WebService that uses this transaction to communicate BizAgi (a BPM) and SAP. The problem is that i don't know how to call this transaction from the RFC. are there any suggestions? Not sure if there's a bapi available for this and i think is not coherent to do a batch input to a transaction like this.
It's my first time using this transaction so any help would be very appreciated.
Thanks for everything.
Luis Allende

I think calling a workbench by RFC does not make much sense.
Have a look into definition of periodic data transfer (there is a small box in step 1 of LSMW).
This allows you to create a frame program which can be executed by a user who does not need to know the whole LSMW.
This program can probably called by RFC
http://help.sap.com/saphelp_nw70/helpdata/en/90/da31ba2e0411d2b43e006094b944c8/frameset.htm

Call transaction from alv

i am calling a transaction from alv i want to select the check boxes on th called transaction and go to the next screen how do i do that

Hello Chandan
You have to handle the DOUBLE_CLICK event either in your callback form routine (FM-based ALV) or event handler method for event USER_COMMAND (ABAP-OO based ALV).
If you call the transaction directly you will not have the authority check for this transaction. If you need this, you can use function module <b>ABAP4_CALL_TRANSACTION</b> instead.
If you want to open the transaction in a new window you can use the static method <b>CL_RECA_GUI_SERVICES=>CALL_TRANSACTION</b> (no authority check!).
Regards
Uwe

Call transaction from the ABAP report

Hi Gurus,
Please help me with suggestion. I would like to access from SAP report with double click transaction FB03. I can access it, but in old transaction view ... How can I get the new transaction view?
Here is the code,
BR
Saso
IF fieldname CS 'BELNR'.
PERFORM bdc_screen USING 'SAPMF05L' '100'.
      PERFORM bdc_field USING 'RF05L-BELNR' fieldvalue.
      PERFORM bdc_field USING 'RF05L-BUKRS' '0008'.
      PERFORM bdc_field USING 'RF05L-GJAHR' int-gjahr.
      PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
      CALL TRANSACTION 'FB03' USING bdc_data MODE 'E'.
      REFRESH bdc_data.
ENDIF

Try this Example:
REPORT ZABHI_TABSTRIP NO STANDARD PAGE HEADING
             LINE-SIZE 80 LINE-COUNT 60.
TABLES : sscrfields.
DATA activetab(6) TYPE c .
DATA mat_des TYPE makt-maktx.
DATA pl_des TYPE t001w-name1 .
DATA mat_gro TYPE mara-mbrsh .
DATA mat_typ TYPE mara-mtart .
SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-002 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-010 FOR FIELD matnr.
PARAMETERS matnr TYPE mara-matnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN END OF SCREEN 001.
SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-003 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-020 FOR FIELD matnr.
PARAMETERS werks TYPE t001w-werks.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block2.
SELECTION-SCREEN END OF SCREEN 002.
SELECTION-SCREEN BEGIN OF SCREEN 003 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block3 WITH FRAME TITLE text-004 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-030 FOR FIELD matnr.
PARAMETERS mbrsh TYPE mara-mbrsh.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block3.
SELECTION-SCREEN END OF SCREEN 003.
SELECTION-SCREEN BEGIN OF SCREEN 004 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block4 WITH FRAME TITLE text-005 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-005 FOR FIELD matnr.
PARAMETERS mtart TYPE mara-mtart.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block4.
SELECTION-SCREEN END OF SCREEN 004.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 5 LINES NO INTERVALS.
SELECTION-SCREEN TAB (15) tabs1 USER-COMMAND ucomm1
                                    DEFAULT SCREEN 002.
SELECTION-SCREEN TAB (15) tabs2 USER-COMMAND ucomm2 .
SELECTION-SCREEN TAB (15) tabs3 USER-COMMAND ucomm3.
SELECTION-SCREEN TAB (15) tabs4 USER-COMMAND ucomm4.
*                     DEFAULT SCREEN 002   .
SELECTION-SCREEN END OF BLOCK tabb1.
INITIALIZATION.
   tabs1 = text-002.
   tabs2 = text-003.
   tabs3 = text-004.
   tabs4 = text-005.
   activetab = 'TABS1'.
AT SELECTION-SCREEN .
   CASE sscrfields-ucomm.
     WHEN 'UCOMM1'.
       tabb1-prog = sy-repid.
       tabb1-dynnr   = 001.
       tabb1-activetab = 'TABS1'.
       activetab = 'TABS1' .
     WHEN 'UCOMM2'.
       tabb1-prog = sy-repid.
       tabb1-dynnr   = 002.
       tabb1-activetab = 'TABS2'.
       activetab = 'TABS2'.
        WHEN 'UCOMM3'.
       tabb1-prog = sy-repid.
       tabb1-dynnr   = 003.
       tabb1-activetab = 'TABS3'.
       activetab = 'TABS3'.
        WHEN 'UCOMM4'.
       tabb1-prog = sy-repid.
       tabb1-dynnr   = 004.
       tabb1-activetab = 'TABS4'.
       activetab = 'TABS4'.
   ENDCASE.
START-OF-SELECTION.
   CASE activetab.
     WHEN 'TABS1'.
       SELECT SINGLE maktx FROM makt INTO pl_des WHERE matnr = matnr.
       WRITE: 'Material ' , matnr , mat_des .
       WHEN 'TABS2'.
       SELECT SINGLE name1 FROM t001w INTO pl_des WHERE werks = werks.
       WRITE: 'Plant ' , werks ,pl_des.
     WHEN 'TABS3'.
       SELECT SINGLE mbrsh FROM mara INTO mat_gro WHERE mbrsh = mbrsh.
       WRITE: 'Material Group ' , mbrsh ,mat_gro.
       WHEN 'TABS4'.
       SELECT SINGLE mtart FROM mara INTO mat_typ WHERE mtart = mtart.
       WRITE: 'Material Type ' , mtart , mat_typ.
       ENDCASE.
And let me know.

Error calling transaction from a transaction

Hi,
I have created a transaction to batch Measurement Point readings for the PM Module. The batch uses a query to determine the tags required to update and it calls the "MeasurementPointWrite" transaction that I downloaded from SAP. My problem is when I run the batch transaction it reports "TransactionLoadException: Unable to find transaction file specified"
Has anyone seen this issue?
The following shows the relevant log dump:
[DEBUG] [MPWriteCall]: Started action execution
[DEBUG] [MPWriteCall]: Type: TransactionCall, Description: MeasurementPointWrite Transaction Call
[DEBUG] [MPWriteCall]: [Initializing Action][Initializing Parameters: [MPWriteCall.StoreTransactionOutput = MPWriteCall.StoreTransactionOutput=[boolean:false]][MPWriteCall.ResetState = MPWriteCall.ResetState=[boolean:true]][MPWriteCall.Persist = MPWriteCall.Persist=[string:INHERIT]][MPWriteCall.Async = MPWriteCall.Async=[boolean:false]][MPWriteCall.Expiration = MPWriteCall.Expiration=[long:21600000]]]
[DEBUG] [MPWriteCall]: Resolving Input Links
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Reader, Type [Assign], Time [ <1 ms], Expression: "PCS7 Automatic"
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.DebugFlag, Type [Assign], Time [ <1 ms], Expression: Transaction.DebugFlag
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.MeasurementPoint, Type [Assign], Time [ <1 ms], Expression: PCSTagRepeater.Item{/Row/POINT}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Reading, Type [Assign], Time [ <1 ms], Expression: PCSTagRepeater.Item{/Row/Value}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Text, Type [Assign], Time [ <1 ms], Expression: "PCS TimeStamp: "&PCSTagRepeater.Item{/Row/TimeStamp}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.CreateOutputXML, Type [Assign], Time [ <1 ms], Expression: Transaction.CreateOutputXML
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.CreateNotif, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.NotificaitonType, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.DifferenceFlag, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] Action parameter creating time [ <1 ms]
[DEBUG] Entering action 'MPWriteCall' implementation.
[DEBUG] [] Loading transaction from file.
[FATAL] [] Unable to find transaction in file system: .trx
[DEBUG] Exiting action 'MPWriteCall' implementation
[ERROR] Error found trying to execute action 'MPWriteCall' Exception: [Unable to find transaction file specified]
[WARN] [MPWriteCall] Skipping execution of output links due to action failure.
[ERROR] [MPWriteCall] Action: Runtime threw an exception. Exception: [com.sap.xmii.bls.exceptions.TransactionLoadException: Unable to find transaction file specified]
[DEBUG] [MPWriteCall]: Finished[ <1 ms] Succeeded: false

For what it's worth, it appears to be a problem at the source. I have the same problem with the same downloaded file. Looking at the xml, there is an error in the self-reference of location. I was unable to figure out how to modify the xml of the export such that a reimport would fix it. (Export it and look at the xml - do a find on MeasurementPointWrite and you will see what I mean).
However, try the following:
Create a new transaction.
Copy the top sequence and include children of the MeasurementPointWrite transaction (basically you are copying the entire transaction contents).
Paste it to the empty sequence in your new transaction.
Save it under some name.
Create another new transaction.
Drag and drop your first new transaction into the empty sequence of your second new transaction.
Now it works...
Go figure.
Regards,
Mike
Edited by: Michael Appleby on Oct 18, 2010 7:44 PM

Call transaction from java iView (link)

Hi,
I would like to call SAP R/3 transaction from a java iView. I know how to do it using the UrlGenerator service. Is there any other way of doing that ? (better way)
Thanks, Nir.

You can Use EPCM.doNavigate() to call R3 Transaction or something like this:
<hbj:link id="r3"
          text="R3 Transaction">
<% r3.setOnClientClick("OpenWindow('/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.Transaction?System=SAP_R3&TCode=SE80&GuiType=WinGui');return false;"); %>
     </hbj:link>
Regards,
P.

Call Transaction from Program by Skipping Initial Screen & Pass the Value

Hi All,
Can anybody help me to call a transaction from my program. I do not want to display the initial screen of the transaction but that TCODE should get opened by passing the values to the parameter of the initial screen.
For Example, in my program I want to call 'SE38' and in that, my Program of Name 'ZTEST' should get opened. So I need to call Transaction SE38, but I donot want to display initial screen of that. Instead of that, I want to put the value of Program 'ZTEST' and thus my program should get opened.
Sandip

Hello Sandip,
Since you have not made any references to Batch Processing, I shall tell you the normal way to do it. First look at the code below and execute it.
set parameter id 'DTB' field 'VBAK'.
call transaction 'SE16' and skip first screen.
There are a few things that you need to keep in mind before you use this statement:
1. All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters.
2. For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number. However, if the next screen can be reached from the first screen by just hitting the Enter key, this will work.
The following will not work as you expect, because the next screen in the transaction cannot be reached by just hitting the Enter Key.
set parameter id 'RID' field 'ZTEST'.
call transaction 'SE38' and skip first screen.
Regards,
Anand Mandalika.
Please reward points if this helps.

Calling Transaction from ALV using OO Method

Hi,
My requirement is as follows....
I have an ALV grid with columns such as month wise Total of a GL account say JAN, feb etc...
When I double click on any of these cells it should take me to the respective Transaction (say FBL3n for the GL account and the company code) . I am able to track the GL account for which the total is displayed and company code is one of my selection criteria. In the main screen of the FBL3N we have to enter the posting date and i also want the Radio button against "all items', presently default is against 'Open Items'. So how can i proceed.
Thanks and Regards,
Namit

DATA gr_event_handler TYPE REF TO lcl_event_handler . .. ..
*--Creating an instance for the event handler
CREATE OBJECT gr_event_handler .
*--Registering handler methods to handle ALV Grid events
SET HANDLER gr_event_handler->handle_double_click FOR gr_alvgrid .
CLASS lcl_event_handler IMPLEMENTATION .
*Handle Double Click
METHOD handle_double_click .
PERFORM handle_double_click USING e_row e_column es_row_no .
ENDMETHOD .
CLASS lcl_event_handler DEFINITION
*Double-click control
Methods:
handle_double_click
      FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING e_row e_column
           i_fieldrows      TYPE lvc_t_row.
           w_fieldrows LIKE LINE OF i_fieldrows,
CALL METHOD o_alvgrid->get_selected_rows
             IMPORTING
             et_index_rows = i_fieldrows.
LOOP AT i_fieldrows INTO w_fieldrows.
    READ TABLE i_batch INTO w_block INDEX w_fieldrows-index.
if sy-subrc = 0.
*       CLASS LCL_EVENT_RECEIVER DEFINITION
CLASS LCL_EVENT_RECEIVER DEFINITION.
* Event receiver definitions for ALV actions
PUBLIC SECTION.
    CLASS-METHODS:
* Row Double click for dirll down.
       HANDLE_DOUBLE_CLICK
         FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
            IMPORTING E_ROW
                      E_COLUMN
                      ES_ROW_NO.
ENDCLASS.
* Implementation
* Every event handler that is specified below should also be set after
* the object has been created. This is done in the PBO processing.
* with the following command
* SET HANDLER oEventreceiver->handle_toolbar FOR o_Alvgrid.
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
*&      Method handle_double_click
* This method is called when the user double clicks on a line to drill
* down.
* The following are exported from the ALV
* LVC_S_ROW
* LVC_S_COL
* LVC_S_ROID
METHOD HANDLE_DOUBLE_CLICK.
* The double click drill down processing should be
* coded in the form below.
   PERFORM F9007_HANDLE_DOUBLE_CLICK USING E_ROW
                                           E_COLUMN
                                           ES_ROW_NO.
ENDMETHOD.
ENDCLASS.
*&      Form F9007_HANDLE_DOUBLE_CLICK
* This form is called when the user double clicks on a line to drill
* down.
*      -->P_E_ROW_ID    - Row ID text
*      -->P_E_COLUMN_ID - Column ID
*      -->P_ES_ROW_NO   - Row number
FORM f9007_handle_double_click USING p_row
                                     p_column
                                     p_row_no.
DATA: lw_output LIKE LINE OF i_output.
* RG:16/11/2004 - Start of Changes
* Need to check that a subtotal or grand total line has not been
* double-clicked, otherwise the report will produce a short dump!
check p_row+0(1) is initial.
* RG:16/11/2004 - End of Changes
READ TABLE i_output INDEX p_row INTO lw_output.
CASE p_column.
    WHEN 'KNUMA'.
      IF NOT lw_output-knuma IS INITIAL.
        SET PARAMETER ID 'VBO' FIELD lw_output-knuma.
        CALL TRANSACTION 'VBO3' AND SKIP FIRST SCREEN.
      ENDIF.
    WHEN 'VBAK_VBELN'.
     IF NOT lw_output-vbak_vbeln IS INITIAL.
      SET PARAMETER ID 'AUN' FIELD lw_output-vbak_vbeln.
        CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
      ENDIF.
    WHEN 'VBRK_VBELN'.
      IF NOT lw_output-vbrk_vbeln IS INITIAL.
        SET PARAMETER ID 'VF' FIELD lw_output-vbrk_vbeln.
        CALL TRANSACTION 'VF03' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
ENDFORM.                    " F9007_HANDLE_DOUBLE_CLICK

Call transaction from RFC?

Similar Messages

Maybe you are looking for