Call transaction - not skipping first screen until browser window maximized

I've had a search on the forum for this but have not been able to find an answer. I'm calling an SAP transaction from a Web Dynpro application, passing over a document number and asking it to skip the first screen, as follows:
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?~transaction=MIR4 RBKP-BELNR=5105600751' '&DYNP_OKCODE=SHOW'
into url.
This pops up the transaction in the new window with the document number (hard-coded above while I'm testing this out) but doesn't immidiately skip the the first screen. The browser window opens at a reduced size and as soon as as I maximize it (not pressing enter or doing anything else), that's when it jumps through to the detail screen. A little strange.
Does anyone have any ideas why it's doing this and what I can do to correct it ?
thanks,
Malcolm.

this is now resolved. My call to the transaction was slightly incorrect. This is now the working code:
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?~transaction=*MIR4 RBKP-BELNR=5105600751' ';DYNP_OKCODE=SHOW'
into url.

Similar Messages

CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'

Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.

Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy

Call Transaction and skip first screen in SE37

Hi All,
I want call transaction SE37 and skip first screen of it. Is it possible through the statemen Call transaction 'SE37' and skip first screen ?.
Of course I have populated the parameter id 'LIB' before this statement but it is not working. Though I have found several posts with this solution but it's not working for me. Could anyone please let me know if this can be done using this statement or there are any other additions required along with this statement or it is not at all possible to achieve this functionality.
Thanks in advance !!.

Solved! without a solution? very funny.
In somewhere of second screen related bdcdata, intensionlly make a mistake to force the system throws the error and the call the trasnaction with mode 'E'. This will solve the issue.
perform bdc_field using 'BDC_CURSO' " I removed letter R in 'BDC_CURSO'
'ISEG-ERFMG(01)'.
CALL TRANSACTION 'XXXX' USING BDCDATA MODE 'E'.
Thanks.
Suresh Yerra.

Call transaction and skip first screen

Hi,
I have a little but I think difficult problem
I have a selection screen and after that I call my dnypro. In this dynpro I can open a dynpro which looks like a popup where I have the possibility to call the same transaction with other input paramters.
the problem is when I make call transaction and want to go back I see the pop up dynpro which calls the transaction. so how can I close this popup dynpro by calling again transaction?

I think I can't eyplain it.
Following. I have:
call transaction trans: selection screen calls dynpro 100, in dynpro 100 button with dynpro 200 with starting parameters.
dynpro 200 calls again transaction trans with skip first screen.
now I have displayed again dynpro 100 with new values. When I now want to go back I can see dynpro 200 which called the transaction. So how can I achieve this that dynpro 200 isn't shown when I go back ?

Call Transaction and skip first screen on workflow task

Hello, I'm developing a workflow with a user decison step, where the user should fill some data in transaction FD02.
When the user presses the button in the workitem, the wf goes to a step where i should call transaction FD02.
I'm using SET PARAMETER ID: 'KUN' FIELD customer. to fill the customer field and CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.
But when I press the button in the workitem nothing happens. I tested the same in a report and it works. Can anybody help me?
Thanks a lot.

Hi,
try below code
data: fcode type FCODE value 'ANTRAGAEN',
       customer type kunner,
       bukrs type bukrs.
SET PARAMETER ID 'KUN' FIELD customer. " to fill the customer field
SET PARAMETER ID 'BUK' FIELD companycoder. " to fill the company code
SET PARAMETER ID 'TTC' FIELD fcoder.       " to fill Function code for enter " it may be other than TTC please check.
CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.

Call Transaction - both Skip first screen and USING in one

Hi Experts,
I have to call a Tcode which is for a report painter report and I have to fill the selection screen parameters for that report. Nothing is mandatory but it will be filled in select option field.
My issue is I can only call this Tcode with all the parameters when I use USIING with BDC. but I also want to skip the selection screen so that only the final output gets displayed.
I tried SET PARAMETER ID but I am filling the select-options range from a custom table so don't know how to achieve that.
Any suggestions !!!

See here: [sdn wiki - Batch input FAQ - Is it possible to simulate AND SKIP FIRST SCREEN using BDC?|http://wiki.sdn.sap.com/wiki/display/ABAP/BatchInputFAQ#BatchInputFAQ-IsitpossibletosimulateANDSKIPFIRSTSCREENusingBDC%3F]

Call tranasaction with skip first screen in ecc6

Hi,
We are doing upgrade from 4.7 to ecc 6. We are getting an error while running a report( The addition "AND SKIP FIRST SCREEN" can't be used with "CALL TRANSACTION .. USING". ) in ecc6. This is not showing error in 4.7. Call transaction with skip first screen is fine in 4.7. But it is throwing an error in ecc6.
Could anybody provide me the pointers to rectify this error.
Regards,
Ramesh

Hi
Did you pass all the mandatory field values to the calling transaction , Because when you use this addition you need to pass all the mandatory field values then only it works fine. Check out whether you are passing all the mandatory field values.
Regards
Pavan

Call tcode and skip first screen

hi all,
before i think of posing a question i have searched SDN for 2days but dint get the desired results.
so i am posting a question.
in my prog am calling a TCODE and in that TCODE i have a mandatory field so when i say skip first screen it does not skip as their is a mandatory field.
so i used my code like this and checked twice and i found i have value in L_PERNO and id is: EHS00PERSONID.
i have a value in L_PERNO.
parameter id of the tcode field is : EHS00PERSONID
set parameter id 'EHS00PERSONID' field L_PERNO.
CALL TRANSACTION 'ZEDIT' AND SKIP FIRST SCREEN .
but it does not set the value... what am i missing still to get it done can i have some input pls.
thanks a lot in advance,
pasala.

Hi Pasala,
You have done everything right and your program will work with simple addition.
Just add the statement below in your transaction 'ZEDIT' in PBO of screen on which mandatory field exist.
get parameter id 'EHS00PERSONID' field 'XXX.'
where XXX is the name of mandatory field on the screen.
Amit Singla

Transaction Variant -Skip first screen of sm30

Hi ,
I have created a transaction variant for a ztransaction using shd0.This is for transaction sm30.
I need to skip the first screen and directly switch to table maintenance screen of the table.
While creating a transaction variant for sm30 I came across the maintain button , but I could not set its value to X.
Any idea how I can do this ?? or how i can directly switch to the maintainance screen?
Regards,
Shital

Hi,
You can make use of teh FM involved in SM30.
See the example code below
PARAMETERS: y_p_lgnm TYPE lgnum.
DATA : y_v_string   TYPE string.
CONSTANTS: y_k_u        TYPE char1   VALUE 'U',
          y_k_x        TYPE char1   VALUE 'X',
          y_k_lgnum    TYPE char7   VALUE 'LGNUM',
          y_k_lgtyp    TYPE char5   VALUE 'LGTYP',
          y_k_eq       TYPE char2   VALUE 'EQ',
          y_k_viewname TYPE tabname VALUE 'YLOMANAGTROL'.
DATA: y_i_seltab TYPE STANDARD TABLE OF vimsellist.
DATA: y_wa_seltab TYPE vimsellist.
START-OF-SELECTION.
*authority check for warehouse number
AUTHORITY-CHECK OBJECT 'L_LGNUM'
             ID y_k_lgnum FIELD y_p_lgnm
             ID y_k_lgtyp FIELD '*'.
IF sy-subrc NE 0.
* user not authorised
   CONCATENATE y_p_lgnm text-003 INTO y_v_string SEPARATED BY space.
   MESSAGE s015(ylo1) WITH text-001
                           sy-uname
                           text-002
                           y_v_string.
ELSE.
*Clear Internal Table
   CLEAR y_i_seltab.
   CLEAR y_wa_seltab.
*passing the selection parameters to the function module
*view_maintenance_call.
   y_wa_seltab-viewfield = y_k_lgnum.
   y_wa_seltab-value     = y_p_lgnm.
   y_wa_seltab-operator = y_k_eq.
APPEND y_wa_seltab TO y_i_seltab.
   CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
     EXPORTING
       action               = y_k_u
       view_name            = y_k_viewname
       show_selection_popup = y_k_x
     TABLES
       dba_sellist          = y_i_seltab.
ENDIF.
Here i am having my Y table 'YLOMANAGTROL'
It has primary key field warehouse number
I am creating a report with a parameter where user will give the warehouse number which he wants to change data for.
Then I check the authoity for this warehouse and then directly call the table in change mode using the FM.
I hope it is useful for you.
Regards,
Ankur Parab

Call transaction & leave the current screen

Hi
I have created two Table maintanence Generator one for master table & second for transaction table. In my master table i have written code for calling the second TMG
ie, call transaction 'zhdms'.
but my problem is from my first TMG when im clicking on one button it calling the second TMG. & im making new entries over der & when i click on BACK button it will call the first TMG & again if i am clicking on Next button it will move on to second screen. but it is showing one information like DEveloper is locked. we can only display it. how to avoid this.
Can we avoid this using leave screen . How to write code for that.

Hi ,
Try this
CALL TRANSACTION AND SKIP FIRST SCREEN.
Effect
Skips the first screen in the transaction (provided all the required fields have been assigned values by the SPA/GPA mechanism).
or
LEAVE TO { {TRANSACTION tcod} | {CURRENT TRANSACTION} } AND SKIP FIRST SCREEN.
Effect
Ends current processing and starts the (new) transaction tcod. All previous internal sessions are deleted from the stack and one new internal session is opened for the program of the transaction that was called. When this session has finished, the system returns to the next higher area menu.
If you specify CURRENT TRANSACTION (as of Release 6.20), the current transaction is called with exactly the same transaction code it was called with using CALL TRANSACTION or LEAVE TO TRANSACTION. With the exception of parameter or variant transactions, this is the transaction code that is also in the system field sy-tcode.. In the case of parameter or variant transactions, it is their transaction code, while sy-tcode contains the name of the implicitly-called dialog transaction.
Regards,
Chitra.

CALL TRANSACTION 'MIR6' AND SKIP FIRST SCREEN .

Hi all,
i hope there is someone that can help me.
My problem is: in an ABAP custom report in a FORM user-command my code is
CASE ls_selfield-sel_tab_field.
    WHEN 'ITAB-BELNR'.
      IF NOT ls_selfield-value IS INITIAL.
        SET PARAMETER ID 'RBN' FIELD ls_selfield-value.
        CALL TRANSACTION 'MIR6' AND SKIP FIRST SCREEN .
ENDCASE.
When i click on output field of my report, not skip first screen but only call MIR6!!!
How can i solve this problem?
Regards.

Hi,
First of all Please don't use all Caps for Subject Line
Test Following Sample Code it will solve out your problem,
DATA: it_bdcdata TYPE TABLE OF bdcdata,
      wa_it_bdcdata LIKE LINE OF it_bdcdata,
      belnr(10).
belnr = '100'. " Give Document Number here
DATA opt TYPE ctu_params.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-program = 'SAPMM08N'.
wa_it_bdcdata-dynpro   = '100'.
wa_it_bdcdata-dynbegin = 'X'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'SO_BELNR-LOW'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'SO_BELNR-LOW'.
wa_it_bdcdata-fval = BELNR.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_OKCODE'.
wa_it_bdcdata-fval = '=CRET'.
APPEND wa_it_bdcdata TO it_bdcdata.
opt-dismode = 'E'.
CALL TRANSACTION 'MIR6' USING it_bdcdata OPTIONS FROM opt.
Please Reply if any Issue,
Best Regards,
Faisal

How to skip first screen that is not selection screen.

Hi Experts
I am working on a module pool program where in I am required to call a transaction with skip first screen. the first screen of this transaction is self made screen with screen painter with input boxes and a submit button with an OK_CODE. now I am able to get all the input boxes filled during the call, however as the ok_code is missing it is not skipping first screen, neither does the PAI of first screen of called transaction is getting fired, is there any way to fire it?

I discovered that once I set the parameter of sy-ucomm and then called the transaction it worked. check the code if you need the help on same
ACTION = 'VW'.
value = 'V01'.
SET PARAMETER ID 'SPM' FIELD SPMON.
SET PARAMETER ID 'VRS' FIELD VRSIO.
SET PARAMETER ID 'VKB' FIELD WA_INDEX-L_VKBUR.
SET PARAMETER ID 'DFM' FIELD ZSDTPLANVRSIO-DAT_FRM.
SET PARAMETER ID 'DFT' FIELD ZSDTPLANVRSIO-DAT_TO.
set PARAMETER ID 'ACT' field action.
set PARAMETER ID 'OKC' field value.
call TRANSACTION 'ZPLAN_INT' AND SKIP FIRST SCREEN.{/code}
this OKC parameter id holds the value for sy-ucomm and the screen 100 of the called transaction has been skiped and ALV was displayed direct away.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZAO_MAIN'.
SET TITLEBAR 'ZAO'.
if pass <> 1.
get PARAMETER ID 'ACT' FIELD action.
get PARAMETER ID 'SPM' FIELD SPMON.
get PARAMETER ID 'VRS' FIELD VRSIO.
get PARAMETER ID 'VKB' FIELD knvv-VKBUR.
get PARAMETER ID 'DFM' FIELD ZSDTPLANVRSIO-DAT_FRM.
get PARAMETER ID 'DFT' FIELD ZSDTPLANVRSIO-DAT_TO.
get PARAMETER ID 'OKC' field sy-ucomm.
set PARAMETER ID 'ACT' field action.
endif. {/code}

Call Transaction Skip First Screen does not work

I want to use 'Call Transaction' to execute the transaction /sapapo/scc_tl1 in Change Mode. I want to skip the first screen. I have added 'and skip first screen' to the CALL TRANSACTION but it still stops on the first screen. The first screen has three buttons: Display, Change and Create. The function key assigned to Change is F6. What is the code to select the F6 key so the first screen can be bypassed.
Thanks and best regards,
Sandy

THE ONLY THINK U HAVE TO DO IS RECORD THE TRANSACTION FOR
CHANGE MODE. AND FILL INTERNAL TABLE OF TYPE BDCDATA AND CALL TRANSACTION.
EXAMPLE: I CALLED SE93 IN CHANGE MODE. COPY AND RUN THE FOLLOWING PROGRAM, U CAN UNDERSTAND WHAT IAM TELLING.
REPORT ZTESTH messAGE-ID ZV.
DATA: IBDCTAB TYPE TABLE OF BDCDATA WITH HEADER LINE.
IBDCTAB-PROGRAM = 'SAPLSEUK'.
IBDCTAB-DYNPRO = '390'.
IBDCTAB-DYNBEGIN = 'X'.
IBDCTAB-FNAM = 'BDC_OKCODE'.
IBDCTAB-FVAL = '=CHNG'.
APPEND IBDCTAB.
IBDCTAB-PROGRAM = 'SAPLSETX'.
IBDCTAB-DYNPRO = '0120'.
IBDCTAB-DYNBEGIN = 'X'.
IBDCTAB-FNAM = 'BDC_OKCODE'.
IBDCTAB-FVAL = '=NEXT'.
APPEND IBDCTAB.
CALL TRANSACTION 'SE93' USING IBDCTAB.

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

Call transaction CJIC using bdcdata and skip first screen

I want to call transaction CJIC and skip first screen. I have set parameters for fields for which I need to pass data. But one field namely display variant has no parameter id. How can I pass value to it and also skip first screen?
I have tried passing its value in bdcdata and also passing ONLI. But it does not run in mode "N". What can be the solution?

Hi frnd,
fortunately transaction CJIC is selection-screen of an executable program RKPEP012.......so u don hav to use call transaction and instead u can use SUBMIT statement................
submit RKPEP012 WITH SELECTION-TABLE rspar
Effect
If you specify this addition, parameters and selection criteria on the selection screen are supplied from an internal table rspar. You must specify an internal table with the row type RSPARAMS for rspar. The structured data type RSPARAMS is defined in the ABAP Dictionary and has the following components, all of which are data type CHAR:
SELNAME (length 8),
KIND (length 1),
SIGN (length 1),
OPTION (length 2),
LOW (length 45),
HIGH (length 45).
To supply parameters and selection criteria for the selection screen with specific values, the lines in the internal table rspar must contain the following values:
SELNAME must contain the name of a parameter or selection criterion for the selection screen in block capitals
KIND must contain the type of selection screen component (P for parameters, S for selection criteria)
SIGN, OPTION, LOW, and HIGH must contain the values specified for the selection table columns that have the same names as the selection criteria; in the case of parameters, the value must be specified in LOW and all other components are ignored.
If the name of a selection criterion is repeated in rspar, this defines a selection table containing several lines and passes it on to the selection criterion. If parameter names occur several times, the last value is passed on to the parameter.
The contents of the parameters or selection tables for the current program can be entered in the table by the function module RS_REFRESH_FROM_SELECTOPTIONS.
Notes
In contrast to selection tables, the data types of the components LOW and HIGH in table rspar are always of type CHAR and are converted to the type of the parameter or selection criterion during transfer, if necessary.
When entering values, you must ensure that these are entered in the internal format of the ABAP values, and not in the output format of the screen display.
Revert back for queries.
Cheers,
Will.

Call transaction - not skipping first screen until browser window maximized

Similar Messages

Maybe you are looking for