CALL transaction using generic user.

Hi experts,
I have a CALL TRANSACTION, which code is: 'ME54' USING BDC_TAB MODE 'E' UPDATE 'S'.
I have previosly defines the BDC_TAB. Is is a backgroud process executes with an event. The sy-uname there is the same as the user that has lauched the event. I want this to be executed with a generic user, example GENUSER instead of the one that really launches the event.
¿Is this possible?
Thank-you very much,
Artur.

Hi,
The only way I can think of at the moment is to extract your CALL TRANSACTION into a separate self-contained program (which it may already be looking at your post). Then use FM JOB_OPEN, JOB_SUBMIT (changing the parameter AUTHCKNAM to you generic user) and JOB_CLOSE (with STRTIMMED = abap_true).
This obviously gives rise to other problems such as knowing when the job finished etc but this depends on your overall design and if this is important or not.
Looking at your overall process this does not sound like a problem. Simply change the background job step for the event - have it call a new program to perform the JOB* FM steps instead which calls your original program that was registered against the event.
Thanks,
Pete

Similar Messages

Message type in BDCMSGCOLL Structure in Call transaction using BDCDATA

Hi,
We are facing issue while capturing message in BDCMSGCOLL structure in Call transaction using bdcdata. The message which are like
Message 'Message Text' Type 'S' Display LIke 'E' .
This message is captured as Success on the Message structure instead of error & user are asking to update it as Error as it is looking like Error message to the end user.
Please provide resolution to the issue.
Regards,
Kapil

Hi Venkat,
I am not doing any upload, i am just doing a replay of the transaction ME21 & in that there are many error message which encounter while creating a PO but when i have check the logic , they are basically a success message which are display like Error so when i have called ME21 transaction using below statement
call transaction ME21 using BDCDATA
into messages bdcmsgcoll.
I am getting the message as success only since the message are of type success but as they are display like E , so user want that in msgcoll structure these messages must be shown as Error.
Regards,
Kapil.

CAll transaction using Adobe

Hi
My Requirement is call to a transcation ex: VA01 using ADOBE thru webservice(Fn module input-> sales order no).
The transaction shld be called when user hit the SUBMIT button Adobe interactive form.
I can create the button in webdynpro and called the screen using the below method. Its working.
lo_window_manager->create_external_window(
exporting
url = url
receiving
window = lo_window ).
But the requirement is only to call transaction when the user hit the submit button in the Adobe form.
It would be helpful if get an idea regarding the same.
Thanks
Arun

Hi
Thanks for all your replies.
Sanoosh
I tried to code in the function module. when submit the button in Adobe Interactive form is calling the Fn module (webservice).
But I couldnt decalre the wd_comp_controller->wd_get_api( ).
wd_comp_controller is an interface. how to decalre this interface in the function module source code.
Here is the complete code I tried in Function Module.
DATA: url TYPE string,
        host type string,
        port type string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
   INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
exporting
url = url
receiving
window = lo_window ).
lo_window->open( ).
Thanks & Regards

SAP MII 14.0 - Calling Transactions using SOAP Runner fails

Hello All,
We are calling transactions in SAP MII 14.0 from external apps using SOAP Runner and we are passing the login info in the payload. But we are getting the following error.
We are passing the following in the payload.
<xmii:LoginName>Username</xmii:LoginName>
<xmii:LoginPassword>Password</xmii:LoginPassword>
We are getting 401 unauthorized as the user name and password is not propagated to the MII.
It works if we supply the info explicitly when we invoke the URL.
Thanks,
Kiran

Hello Rajesh,
I don't think that will be allowed. We usually pass the credentials in the payload and it has always worked for us in MII 12.1. But in MII 14.0 it does not seem to be working.
Thanks,
Kiran

URL format to call transaction using WinGUI

Hello,
We would like to display SAP transactions in the portal, however they are from the SAP APO sytem and require the the WinGUI setting as they contain graphics that the ITS cannot interpret. WinGUI does not use the ITS. An iView or External Service can be created to display the required transactions using the SAPApplication.Transaction but as the screens are made up of several windows we would like them to open up full screen. The standard iView can open in a new screen but the window opens in a different place depending on the user's internet settings. To solve this a java iView could be written to dictate the starting point and size of the window but I am having trouble with the URL of the transaction. Using WebGUI the following format can be used to call a transaction:
<System.Access.ITS.Protocol>://<System.Access.ITS.HostName><System.Access.ITS.Path>/webgui/!?transaction=<SAP_Dynp_AutoStart%><SAP_TCode>%20<SAP_Dynp_Params%>&client=<System.Client>&language=<Request.Language>&accessibility=<User.Accessibility>
Does anyone know the format of the URL to call a transaction using wingui (it doesn't work to substitute wingui for webgui in the format above)?
Thanks for your help,
Katie

HI,
You need to write the codition like below,
If Message = 'Successful'
If Button = 'SUBMIT'
Call Transaction 'ZABC'.
Endif.
Endif.
Regards
Sudheer

As01 transaction using substitution user exit populate classificaion

Hi all,
I have a requirement, where in using the substitution user exit rule U210, I need to populate fields ANLB-NDPER, ANLB-NDJAR and ALNA-VMGLI from the values maintained in Ztable.
I am able to overwrite the SAP standard values for the fields ANLB-NDPER and ANLB-NDJAR. But not able to populate the filed VMGLI(Classification key).
For some asset classes, the classification key is not mandatory and the user without giving the value in that field if save the transaction, then I need to populate the value of VMGLI with the ztable value.
The present rule U210 is not working for classification key.
Please suggest, is there any other user exit for the scenario where we can populate VBGLI field.
regards
Rajani Yeluri

In the user exit documentation, it doesn't say anything about this exit being used for validation, therefore, it probably shouldn't be used as a validation routine, especially if its not being trigger at every PAI.
<i>FU EXIT_SAPLAISA_001
Short text
Assign Inventory Number
Functionality
Using this user exit, it is possible to assign an inventory number when you create a new asset master record.
Notes
In the user exit, it is absolutely forbidden to use a statement that leads to an update or removal of database changes. Examples of such statements are:
'Commit Work' , 'Rollback Work' or call of function module 'DB_COMMIT'.
Parameter
I_ANLA
E_INVNR
Exceptions
Function group
XAIS</i>
Regards,
Rich Heilman

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

CALL transaction using itab aswell as skip the first screen

Hi All,
I am doin BDC for some Ztransaction and i am that transaction using CALL TRANSACTION... but i want to skip the first screen of the Ztransaction as well as pass the Itab .. mode .. update and message table.... how can i do it...
CALL TRANSACTION Z... USING iTAB UPDATE DATE MODE A message bdcmsgcoll AND skip THE FIST SCREEN.. how to acheive it....

PERFORM BDC_DYNPRO      TABLES BDCDATA
                       USING 'SAPLBPT1' '0100'.
*PERFORM BDC_FIELD       TABLES BDCDATA
                       USING 'BDC_CURSOR'
                             'BCONTD-BPCONTACT'.
*PERFORM BDC_FIELD       TABLES BDCDATA
                       USING 'BDC_OKCODE'
                             '/00'.
*PERFORM BDC_FIELD       TABLES BDCDATA
                       USING 'BCONTD-BPCONTACT'
                              V_CONTRACT.
the above code /recording call the first screen 100 which i dont want...
below code / recording is for screen 200 which i want to appear directly when i call the transaction....
skipping the first screen 100..
PERFORM BDC_DYNPRO      TABLES BDCDATA
                        USING 'SAPLBPT1' '0200'.
PERFORM BDC_FIELD       TABLES BDCDATA
                        USING 'BDC_OKCODE'
                              '=SAVE'
PERFORM BDC_FIELD       TABLES BDCDATA
                        USING 'BCONTD-PARTNER'
                               V_GPART.
PERFORM BDC_FIELD       TABLES BDCDATA
                        USING 'BCONTD-ADDINFO'
                               V_ZONE.         "ZONE(S,N,E,E,NE)
PERFORM BDC_FIELD       TABLES BDCDATA
                        USING 'BDC_CURSOR'
                              'EENO_DYNP-ZEILE(01)'.
PERFORM BDC_FIELD       TABLES BDCDATA
                         USING 'EENO_DYNP-ZEILE(01)'
                               V_LOG.                 "MESSAGE
CALL TRANSACTION 'BCT1'    USING BDCDATA
                           MODE MODE UPDATE UPDATE
                           MESSAGES INTO IT_BDCMSGCOLL.

RE-FX:call transaction using bdc-tab:No bdc_okcode for swapping table-entry

Hello,
I am trying to call transaction RERAOP (module RE-FX) to make an accounting transaction. There is 1 debit posting and 1 credit posting in a grid. Selecting the debit posting, a details scrren is shown, consisting of 2 registers.
On the first register you have to fill different fields. At this point it isn't possible to select the second register. The second (credit) posting is diplayed when you hit the enter key. After the fields in the details screen of this (credit) postings have been filled, it is possible to swap back to the first (debit) posting with a double-click on the first entry of the postings-table.
Finally I come to the point ...
If I record these steps (batch-input recorder) and generate an report of this code there is no bdc_okcode for the above mentioned swap back to the debit posting. While executing this report I get a lot of error message because the swap back to the debit posting doesn't work (--> because of the missing bdc_okcode) and therefore the batch input tries to fill fields which are not on the active screen (because they are on the 2. register which is not displayed).
Hope that there is someone out there who:
1. Understands my miserable english and
2. has an advice for me.
Thanks in advance!!!
Stephan
Edited by: Stephan Scholze on Apr 22, 2008 1:34 PM
Edited by: Stephan Scholze on Apr 22, 2008 2:24 PM
Edited by: Stephan Scholze on Apr 22, 2008 3:19 PM

Not sure how much I can help as we don't run RE-FX (RERAOP - what's the program name btw?) at any sites I work at, but a couple of general BDC things you might try (based on problems I've had with BDCs to other Tcodes)...
When you are in that transaction normally do a right click to see what function codes are defined as there might be one there that allows you to switch between these debit & credit data entry places (how are they rendered, btw - are they ALV grids or what? If they are table controls then you should be able to position the cursor on row 1 and trigger an F2 double-click)... also look at the PF-STATUS carefully in case (once again) there is a function code that lets you swap from DR to CR & vice versa... and even browse the source code in the user-command for the screen might give a clue as to how to achieve this. Of course it may not be possible if the data entry is control based i.e. the input areas are provided in the SAPGui not the application server (such as the text editor & ALV grids)... in which case you start hunting for BAPIs and function modules and the like, or end up having to pass data into the transaction via something like an "export" and catch it inside a user exit or enhancement via an "import"... all rather messy, but quite possible.
Jonathan

Problem in call transaction using FD33 t code

Hi all i'm developing a report in that in that i'm calling a tcode FD33.
I want to skip the initial screen.For that i need to pass Customer , Credit control area and status from my program to that tcode.
But my problem is that how to pass the value to check box.
i.m writing the following code
   "Set parameter ID for transaction screen field
        SET PARAMETER ID 'KUN' FIELD W_ALV-KUNNR.
        SET PARAMETER ID 'KKB' FIELD W_ALV-VKORG.
       "Execute transaction FD33, and skip initial data entry screen
        CALL TRANSACTION 'FD33' AND SKIP FIRST SCREEN.
So how to set the value of the STATUS check box.
thanks in advanced.
Dheeraj

use:
data: dynnr(40) value '/210'.    "or number of another dynpro you wish to go
SET PARAMETER ID 'CDY' FIELD dynnr.
A.

Auditing a transaction used by user

hello, i have a question concerned to how i can know what transactions were used or executed by a user in a date, or for example the previous month, this is in a was or a R/3 environment.
thanks Robinson

Check trxn ST03 or ST03N (depending on release). This is standard SAP functionality. It is the performance monitor but can tell you what trxns were executed for a time period and by whom. Of course it does not state what was done with the trxn simply what trxns and programs were run.
If additional information regarding trxns and users is required. Trxns SM19 and SM20 can be used of course if it is actived.
See OSS note # 139418 - Logging user actions, as a start. The reference to trxn STAT is similiar to ST03 however STAT only contains the current records. This has to do with prgm RSCOLL00 running periodically and taking the records in STAT and applying them to the database where they show up in ST03, which is off the subject a bit.

As01 transaction using substitution user exit populate classificaion key

Hi all,
I have a requirement, where in using the substitution user exit rule U210, I need to populate fields ANLB-NDPER, ANLB-NDJAR and ALNA-VMGLI from the values maintained in Ztable.
I am able to overwrite the SAP standard values for the fields ANLB-NDPER and ANLB-NDJAR. But not able to populate the filed VMGLI(Classification key).
For some asset classes, the classification key is not mandatory and the user without giving the value in that field if save the transaction, then I need to populate the value of VMGLI with the ztable value.
The present rule U210 is not working for classification key.
Please suggest, is there any other user exit for the scenario where we can populate VBGLI field.
regards
Rajani Yeluri

Hi,
Did you find a solution. I'm just looking for the same thing.
best regards..

Transaction used by user

There is any way to know which transaction user used
in the last month or more ?

Hello Kobi,
Have a look at the site. Might give u something....<a href="http://www.guidancetech.com/people/holland/sap/abap/">http://www.guidancetech.com/people/holland/sap/abap/</a>

Rollback a call transaction using CTU_PARAMS

Is there any combination of CTU_PARAMS and ROLLBACK that can be used to rollback a call txn. A BAPI is not available for me to use to perform the function I need.

Hi,
I dont think there would be any combination available for CTU_PARAMS and ROllback.
CTU_PARAMS is available only under the following FM`S :
BDC_RECORD_TRANSACTION
BDC_RUNNING
RS_HDBDC_CALL_TC_BATCH_INPUT
RS_HDBDC_CHANGE_TC_BATCH_INPUT
Rollback can be done using BAPI_TRANSACTION_ROLLBACK.
It would be good if you call the Roll back BAPI explicitly instead of doing rollback along with CTU_PARAMS. Make both of them as independent calls.
Best regards,
Prashant

Call transaction BDC with different user id

Hello,
We have a BDC program for creating Invoice using "CALL TRANSACTION VF01" method. But there are are few user IDs accessing this program who do not have authorisation to VF01. So requirement is to create Invoice with a common user id.
Please help if it is possible to call transaction with different user id. Please also provide you inputs if you can suggest some other way to fulfill this requirement.
Thanks & Regards,
Rohit

Hi Rohit,
if users are not authorized to post invoice, why is it required to surpass the checks?
A Question the business should answer.
It should not be the consultants obligation to find doubtable ways.
Regards
Clemens

CALL transaction using generic user.

Similar Messages

Maybe you are looking for