Call Transfer Problem with cucm

Any extension registered to CUCM dials any PSTN number. Now call has been conntected. Now that extension user wants to tranfer that call then tranfer softkey remains unpressed. (nothing happens if we keep pressing tansfer button)

Mohammed,
I suggest you open another thread for your issue...This may not be the same problem as the origal post.
In any case...Can you send the ff:
1. CUCM traces (pls send the calling and called number)
2. "debug ccsip messages" from the CUBE
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Similar Messages

  • Problems with CUCM 9.1 OVA file

    Hello all
    I´m facing problems with CUCM 9.1 I downloaded from Cisco when I run it in the VMware I got the following screen
    What should I do to resolve it?
    Regards

    Actually when I tried to open the original OVA I got the message
    "the ovf descriptor file could not be parsed"
    Then I opened the OVA file and took just VMDK file and created a virtual machine with this VMDK file
    Then I got this message

  • Bluetooth File Transfer Problem with Video Clips -...

    Hello!
    I am posting this problem even though a similar one is claimed to be solved ...
    I have a similar Problem with BT video clip file transfer in my E5-00 as someone had earlier with music files (SW up to date). Except that in this case the files are unique video clips received from one of the latest Samsung Android phones via Bluetooth (don't ask me which format).
    Tried the obvious first, using Windows File Manager over USB. Even Windows Search could not locate the files, not even using wildcards.
    Also tried using Ovi Suite Syncronisation, but the files did not appear in either Photos/Videos or Messages (even though the files are in the SMS Inbox - does not make sense why). 
    The problem in applying the solution approach presented here for Music seems to be that the files cannot be played at all in my E5-00's. Therefore I don't get as far as to the menu where the E5 would ask whether or not the files should be saved or not.
    So far I have not been able to connect to an old bluetooth laptop (Windows XP) so that the Bluetooth Exchange would connect let alone seen whether the BTexchange works in this case or not.
    Is there any other chance of getting to the files through the directory structure? If so, please give me the (Windows) directory path? Any other advice than switching to Android?

    Unfortunately I have reached an impasse.  If I touch a video clip (in organizer) the system crashes.  I mean locked up cold. I'm not sure what has caused this but I do know that I will not be able to communicate correctly or sufficiently with you in order for you to help me out.
    I've found PS and Premier to be very difficult to work with.  Very, very frustrating.  Photography, both still and video, is not as enjoyable as it once was.
    Again, I very much appreciate your initial help and if I get to a point where I've improved my situation ... I'll reach out again.  Thanks

  • Call dropping problem with my iphone 4s

    Recently from past two weeks I have a problem with my iphone 4S of calls dropping automatically.  I tried reseting all the settings etc but no improvements till date.  I am facing huge problems since my calls are all business calls & very important ones.

    Hi
    - you cannot restore it from iTunes? as from your explanation, it looks that its iOS problem. or
    - try to let the battery drain (< 5% or until it shuts down) and connect it to iTunes and try restoring. or
    - keep it plugged in the charger for 3,4,5 hrs and do hard reset again ( lock+home bottoms)

  • Windows 10 Calls dropped problem with recording device

    I now there are others experiencing this issue. Though, however not only when either I call someone or they call me the call drops and "problem with recording device" error message is displayed. It is also stating to those trying to call me or answering my call that I can only accept IMs.Can someone please help as its starting to become a complete waste of my time. I am running Windows 10 and Skype Version: 7.7.0.103  

    Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
    (i.e. compress DxDiag.txt ---> DxDiag.zip) 

  • Overdrive transfer problems with new ipad and old ipod

    installed overdrive for ipad on pc (win 7) and ipad2 app.  downloaded book from library site and it allows 3 transfers to devices.
    hit "transfer" and get error message that overdrive is not able to connect to my device(s) yet itunes shows my device and syncs my other items.
    tried the manually manage idea in the help threads. i use firefox. i have installed all of the many itunes/ipad/ipod updates,  tried reinstalls, reboots and new attitude...but not getting anywhere.
    help needed -thanks

    Quote
    Originally posted by Wonkanoby
    1 the board will not accept nor load a drive with old chipsets drivers on it
     do a clean install or over install
    2 you have to set fsb to 166 with the xp 2500  in the bios
    3 if your using an old psu i dout its going to be good enough
    I am having a simular problem with system hanging up and getting blue screen from time to time.Running msi K7N2 Delta- L board with corsair value select VS1GBKIT400 PC3200 1024MB 2x64Mx64 2x184 DIMM,Leaktek winfast A250 ti4600 video card,antec 350w ps,xp home loaded on 30 gig wd 7200 drive and clean install.Not looking to overclock just want stable setup as about all I do is play with PSP7 and run driving games.Think I do not have bios settings correct as I am still a beginner.Any help or thoughts appriciated.
         Thanks Bruce

  • LINKSYS spa9000 call transfer problem

    Hi, I have been reading through the forums and changing settings without success. If I set the handset to callfwd then it rings and then goes silent when an outside caller is connected. Also the same occurs when I try to transfer a call. However if I try to do the same with a call which has been initiated between internal handsets then it works fine - any ideas? I have already changed the settings on the bridge mode and enabled force proxy. Hope this makes sense Phones are spa941/942 Cheers

    Can I clarify at least the call transfer part of your posting? Is it the case that: - an external caller calls in, and is answered by one of your SPA9xx phones - you then do an 'attended call transfer' to transfer the call to another internal extension - the other extension answers, but on completion of the transfer does not have two-way audio with the external caller Is that the scenario you have?

  • Log and Transfer problem with Canon DSLR

    I have not been able to make Log and Transfer work with my canon 5D mrk II files. I can import the files or even drag and drop them into FCE but never have been able to get them to come in using log and transfer function. I have tried every kind of file conversion using quicktime Pro and MPEG StreamClip. Does anyone have a way of getting their files into FCE using this function?
    All I ever get is this error:
    "DCIM" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    My file structure from the chip is: /DCIM/100EOS5D/MVI_**.mov (and also) MVI_**.thm

    have you loaded the canon plug in for final cut? this may be the simplest way for you to get those files into FCP.
    http://www.usa.canon.com/dlc/controller?act=GetArticleAct&articleID=3249

  • Also Transfer Problem with ZEN X

    Finally i decided it to buy a zen xtra.
    The player works fine, also the firmware update was no problem.
    But then i wanted to transfer my mp3 files to the zen, i used just the nomad explorer for that(Because although i read the readme, i didn?t manage it tofind the button in Media Source for transfer :-)
    But i don?t need the media source Organizer anyhow, so i just do it with Nomad explorer. Just select my mp3 files in windows explorer, right click copy, and in Nomad explorer paste it into the music library.
    Ok, so i wanted to copy 4 albums this way, the first 2 were transfered well, but at the third album, it suddenly gave me an error saying :" Unknown error" and the explorer froze.
    I restarted the PC and i thought, ok, the mp3 has an error, but i opened it with various programs, and it doesn?t have any error. So i tried again to copy the file to the Zen. It was weired, because this time it worked. So i thought, this was it...but it wasen?t...
    I again copied a new album to the Zen and it again happened..just at any file, sometimes at file number 7, sometimes at number 2, sometimes it wordk without any problem..
    But it is a pain in the ass, because i don?t want to sit in front of my PC all the time, when transfering many mp3?s...and if you come back after 5 minutes and you think it'ss ok and then you see, that at file 20 the error occured, that?s not very funny.
    Does anybody has a clue about what the problem could be?
    Thanks in advance..Kind regards.

    Despite not wanting to use MediaSource I suggest you try it at least to see if you have the same problems.
    Also you should make sure to update the firmware and MediaSource version by downloading them from?Nomadworld.com downloads and using the install instructions here in the Zen FAQ at Nomadness.net. As emphasised there, make sure also to download and install the Nomad Jukebox Type 2 file as well.

  • Log and transfer problem with prores files

    Working on RED project. Started several months ago. Shooting and logging as we go. Project setup on FCP, RED media converted to prores422 proxy with RED software(rocketcineX) and saved on Internal 2 TB RAID. NO problems for past 4 months. Moving prores422 proxy files into FCP via Log and Transfer. (I thought this was necessary, is it?) Anyway its working just fine. Loaded a thousand or so clips to date. Last transfer was August when brought in some P2 media. Now when I go and try to bring in the prores422 proxy clips as before suddenly I get error message of "unsupported media or invalid directory structure. This even applies to all the older files that I had already transferred by log and transfer. They worked before but now they don't. Any suggestions as to why the change? The project will be conformed back to original RED r3D files after edit. Any help greatly appreciated.
    Thanks,
    Jeff

    First, get Preference Manager from Digital Rebellion (free) and trash FCP preference files. Run Disk Utility to repair all drives (Repair Permissions on OS drive). This should be done once a week, anyway. Disk Warrior would be your last resort (and should be run once a month on your drives, anyway). If Disk Warrior won't fix the problem, you have a dead hard drive. Replace it, restore from the backup you've been making of your data on a regular basis. I mean, you do have a backup that you do almost daily for such a large and important project, right?

  • Asset Transfer - problems with incorrect depreciation values/period

    Hi,
    I'm trying to do an asset transfer between two company codes with transaction ABT1N using the gross method.
    My problem is that when the asset is transferred the number of depreciation periods restart in the receiving company but with the net value from the sending company.
    Example:
    Company 1100:
    Asset 1:
    Aquired: january 2005
    Value: 10 000 $
    Depreciation time: 5 year x 12 months = 60 periods
    Transfer to company 1200 on july 2007...
    Depreciation in 1100 so far = 5 000 $
    Net value to be transferred to CoCode 1200: 5 000 $
    Here comes the problem, when I look at the depreciation time in company 1200 after the transfer, I see that the system now wants to depreciate the net value of 5 000 $ on another 60 periods period. This means that the asset will have a lifetime of 7,5 years in total instead of 5 years.
    What I want to do is that after the transfer the depreciation should only by the the number of periods that is left from the original depreciation start in company 1100. This means that after the transfer there should only be 30 depreciation periods left in company 1200 on the transferred asset.
    Thanks for response! I will add a lot of points to thoose that provides me with solution solving info.
    Best regards
    Carl-Johan

    Carl,
    This is where you can influence the fileds to be transfered in the transfer variant [1-Gross in your case].
    Asset Accounting>Transactions>Intercompany Asset Transfers>Automatic Intercompany Asset Transfers>Define Transfer Variants-->Specify Transfer of Fields (for New Asset in Target CoCd)
    Select the variant 1-Gross method and then click on the Depreciation area on the left bar. The system will display the all the Depreciation area for the Chart of Depr in question. Here for each depreciation area you can dictate what values from the old asset need to be trf to the new asset.
    In your case, the system is not transfering the remaining useful life. Precisely you need to transfer the field group 19-Expired useful life and 20-Expired life in periods.
    That should do the needful for you.
    Have a nice day.
    Vishal Thakur.

  • I have call fail problem with my iphone 4 , i can't make calls

    I'm facing the problem of call fail and i can't make calls from my i phone , but i can recive calls & data also , only the problem is for the outgoing calls.

    ejcampbell wrote:
    Strange that a 10-12 year old dumb phone significantly out perfromed the 4S with a marginal signal is little disquieting. 
    Not really... that ancient EDGE only phone will stop working as AT&T sunsets their EDGE network over the next few years.
    Some phones are simply better at picking up weak signals than others.

  • Log & Transfer problem with Canon Vixia

    I have a Canon Vixia HG20 and I am trying to use the log and transfer. But it is not working.
    I select my clip and select add to queue but it never adds. I get a red exclamation sign and it says clip idle.
    I've used both of my macs, an iMac with Tiger and a Macbook with Leopard. I have Final Cut Express 4.
    I have tried setting the audio to plain stereo, didn't help
    I can get iMovie to transfer the clips no problem.
    Anyone know what I need to do?

    I am using the Canon HG10 with CE 4.0.1 and seem to be having the same problem. I am new to FCE 4.
    I have tried a few of the settings on Easy Setup however I do not seem to be having any joy.
    If anybody could shed some light onto this I would be so grateful!
    Thanks

  • N2G transfer problem with Zen Sl

    I've had my Zen Sleek nearly a year now and have never encountered problems transferring tracks from Napster To Go until recently when I decided to format my player. Since then I am able to transfer approx 20 songs before I receive a number of error messages stating that my device is full (it's a 20 gig!), or I have no/or too many licenses, or I need to format the player. I have no problem transferring non-Napster tracks. I've downloaded all the patches, reinstalled all the programs involved in the process, and tried just about every suggestion I could find on this message board, and still I'm having this problem. Can someone please help? I'd hate to see ?200 go down the drain!
    Cheers!

    Are you using WinXP with WMP0 which support MTP?
    If not, think you need to send back to Creative Care for service.
    There is a driver and firmware in the web to convert to your ZEN sleek to MTP version, but your PC must support MTP st.
    If you didn't execute reload firmware, I think the following driver will help:
    http://uk.europe.creative.com/suppor...type=0&x=3&y=5
    You may try out see whether your PC will recognise it's
    Then upgrade your firmware to MTP version in recovery mode:
    http://uk.europe.creative.com/suppor...type=0&x=25&y=
    But all your data in your ZEN Sleek will be lost...

  • JME Socket File Transfer - Problem with writing file

    Hi everybody, i'm trying to code a P2P app for a school project and i have a problem when trying to write to a file.
    This method recieves a file form a Socket Server computer that tries to send me a file to the mobile client.
    The method recieves the IP adress (String add) and the port of the server.
    Also, i would like to know about the buffer(byte) size.
    This codes runs well in emulation, but it doesn`t write to a file.
    And the main problem is:
    "When i run this in the mobile, the file is created in the cellphone memory with a size of 0kb."
    The server code was tested with a computer client and recieved the file succesfully.
    The server recieves de socket connection form the cellphone without problem.
    public void recibirArch(String add, int port) throws Exception {
    try
    recibArch.setText("Espere por favor...");
    long start = System.currentTimeMillis();
    int bytesRead;
    int pasos = 12;
    int current =0;
    SocketConnection sock = (SocketConnection)Connector.open("socket://"+add+":"+port);
    byte [] mybytearray = new byte [1024];
    InputStream is = sock.openInputStream();
    FileConnection fc = (FileConnection) Connector.open("file:///"+saveRoot+"5letras.txt",Connector.READ_WRITE );
    if( !fc.exists() ){
    fc.create();
    } else
    fc.truncate(0);
    DataOutputStream fos = new DataOutputStream(sock.openOutputStream());
    bytesRead = is.read(mybytearray,0,mybytearray.length);
    current = bytesRead;
    while ((current = is.read(mybytearray)) != -1)
    fos.write(mybytearray, 0, current);
    fos.flush();
    current+=bytesRead;
    long end = System.currentTimeMillis();
    fos.close();
    sock.close()
    catch(Exception err)
    String error = "ERROR: " + err.toString() + "\nDescripción: "+ err.getMessage();
    System.out.println(error);
    txtLog.setString(error);
    Edited by: xtylo on Sep 30, 2008 10:56 AM

    Thank you Tunde for looking at my issues!
    The file size is not an issue here. We tested with empty files or files with smaller than 1KB sizes. They all showed problem. The frequency of file transfer shouldn't be a problem either. Through some user interaction on front panel, a couple of files will be transferred. That's basically how often the file transfer occurs.
    Interestingly enough, I replaced the copy.vi with a subvi I created using DOS command with System Exec.vi and the issue of copying files went away. My co-worker tested on both XP machine and Windows 7 machine. The DOS command worked fine thru Lavview's System Exec.vi. I think I can take that as a work-around if we can't figured out why copy.vi wouldn't work. Still, it would be nice to know why it doesn't work.
    Now I'm still facing some issues with the usage of Check If File or Folder exist.vi. Sometimes it can detect the existing files and sometimes it doesn't.
    Thanks very much! 

Maybe you are looking for