Call Type Half Hour - Aggregated over days

I am looking for suggestions on Call Type Half Hour report (calltyp22 in webview).
We need a custom version where the half hours stats are for the entire interval not by each day.
Is there a canned report for this in 7.5 Webview? is this something one can do with CUIS/CUIC?
In terms of SQL I could do some group by basedon time - but would appreciate any hints.
Thanks.

There's nothing out of the box that will do that. I've built those type of reports as custom reports before for webview so I would say you'd have to look at doing it in SQL (from memory I did it by casting DateTime to a string, doing a RIGHT string function on it to grab just the time and then grouping by that).
In CUIS you'll run across the same issue, you'll be able to group by day if required out of the box but to aggregate for a 30 minute interval over a period of days that will need to be done using modified SQL just the same.
Cheers,
Nathan

Similar Messages

How to Report a Peripheral Skill Group in half hour intervals

I have a requirement to report on our service desk's incoming calls during half hour intervals between the hours of 8am - 6pm Monday - Friday between the dates of 22/5/13 - 22/10/13.
Unfortunately when I run this report at the moment, it includes half hour intervals after 6pm, all the way through to before 8am the following morning. (The report also includes weekends)
This causes an issue in terms of the maximum number of rows the report can generate and I think it may essentially mean that I need to manually run this report daily and collate all the figures together.
Is there anyone that can provide any advice on how I can get the data I require?
Further Information:
Using:
Cisco Unified Communications
Sb2-wmal-hdsa
Skill Group
Peripheral

Are you using WebView or CUIC? CUIC will let you limit the results to data within a specific time period and on certain days of the week.
If you're doing this in WebView, I would run a few separate reports (whatever date range is small enough to not cut off data), export them to Excel, combine the data in there, and filter based on the time and day of week. The excel formulas are fairly easy to build with a little practice.
-Jameson

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?
How exactly it picks up a specific data value during Hourly aggregations and Daily aggregations?As in How the value is chosen. Does it say averages out or simply picks value at the start of the hour/day or end of the hour/day ??

I'll try one more time. :)
Views in the operations console are derived from data in the operational database. This is always raw data, and typically does not go back more than 7 days.
Reports get data from the data warehouse. Unless you create a custom report that uses raw data, you will never see raw data in a report - Microsoft and probably all 3rd party vendors do not develop reports that fetch raw data.
Reports use aggregated data - hourly and daily. The data is aggregated by min, max, and avg sample for that particular aggregation. If it's hourly data, then you will see the min, max, and avg for that entire hour. Same goes for daily - you will see the
min, max, and avg data sample for that entire day.
And to try clarifying even more, the values you see plotted on the report are avg samples. If you drill into the performance detail report, then you can see the min, max, and avg samples, as well as standard deviation (which is calculated based on these
three values).
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

When I went to update ios7 it came up as plus into iTunes. When I plug it into iTunes it's making me retire my phone but has been on "contacting the iPhone update server" for over a half hour. What do I do?

When I went to update ios7 it came up as plus into iTunes. When I plug it into iTunes it's making me retire my phone but has been on "contacting the iPhone update server" for over a half hour. What do I do?

To clarify, I meant to say, when I plug my phone into my computer and connect to ITunes.

Having problems doing an iCloud backup it keeps showing the estimated time thing but the blue load bar hasn't budged in over a half hour is there a way to correct this

Having problems doing an iCloud backup it keeps showing the estimated time thing but the blue load bar hasn't budged in over a half hour is there a way to correct this

You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

I started and Export PDF over two and half hours ago, and it is still going. How can I stop it?

I started an export PDF over two and a half hours ago and it is still going. I can't stop, and I can't upload export anything else.

I have the same problem - updates are stuck on loading, and the app store is now also doing the same. I've tried resetting, but it hasn't made any difference.
I haven't been able to load iTunes onto my computer - 2 hours on the phone with Apple, as well as 4 hours of my IT guy's time (which I paid for) and no one could help. So going through iTunes on the computer is not an option for me.
Is there any way of cancelling or resetting the apps just with the phone?
Have had the phone for 6 months and this is the first time it's happened, but it's been stuck like that for about a week. Now I can't update or load any apps.

CUIC - Meaning of "Offered" in Call Type Historical All Fields?

I am using the report template "Call Type Historical All Field Daily". And i feel very confusing on the field "Offered".
From Cisco document, offered tasks is the field CallsOffered from table Call_Type_Interval when means "The "The total number of calls of this call type offered during the reportinginterval.".
From "Call Type Historical All Field Daily" report, Can i make an assumption that
"Offered = Handled + Aban + Return + Default Treatment + Network Routed + Flow Out + Call Error + Other" ?
But i found that the number of offered task always is greater than the sum of right hand side. So where is the missed offered call/ task? (my system only has call task)
Thank you for any suggestion.

Hi,
I do understand your struggle but you cannot simply compare data which is not supposed to be compared. If you want to see the calls, you need to break away from CUIC/WebView and take a look at the database tables (or, more specifically: database views), especially the ones named Route_Call_Detail and Termination_Call_Detail. The combination of these two will give you the list of all calls - in theory.
If your call center does not run 24 hours a day, there's a slight chance that you can compare information, but using strict daily aggregation. Let me just check, what other columns we can use for comparison. What is the ICM version you are using?
G.

Phone dings every half hour

Hi there
I'm wondering if anyone knows why my landline is making a little ding noise twice every half hour? It's a Wild and Wolf series 302 plug in phone. It doesn't have a separate power supply, and is plugged into an asdl filter.
It's been dinging every half hour since we first plugged it in on Saturday. Phone line normal (had engineer out on friday for separate issue).
It does it at 5 past the hour and 35 mins past the hour which is a bit strange.
Any thoughts?
Thanks in advance

A phone line has 50DC V on it provided by an Exchange Battery... When you receive an incoming call it converts to 75AC, it sends the 75AC in two short bursts repeatedly which hits a capacitor within the NTE/LJU and in the case of most modern phones, especially cordless a capacitor in them, this then trips the bell in the phone to go Ring Ring, Ring Ring, Ring Ring......
Anyway, your phone may not have a capacitor, just because it's modern doesn't mean it will. What kind of phone socket do you have? Is it a BT or Openreach branded NTE5a?
I was gonna suggest if you have a non standard LJU such as a decorative one it could be it has no capacitor and AC leakage from other circuits causes your phone to tinkle but as its every 30 mins that's unlikely?????
if the ringing was random it would make more sense, i know the Exchange does routine night testing but that's not every night and it's only done at night, never during the day and they would test the same line every 30 mins so it won't be that.......

Is it common for the phone to to discharge in 3 and half hours and hardly used?

Is it a common problem for the phone to run the battery completely dead in 3 and half hours. Screen went black and unresponsive. It charged for about 8 hours today. Any one else had this problem.

Hi. I bought a new iphone 5 four days ago and was horrified that it discharged in less than a day with one phone call and a bit of facebook browsing. I then read up all the info and tips on the web. I turned off everything that wasn't necessary - mainly in location services, turned e-mails to fetch and not push. Also turned off i cloud so it will only back up when I tell it to. Battery still drained very quickly. I then plugged into itunes and did a whole restore (always had to do this previously for any software update before icloud!). That was yesterday morning at about ten o'clock. Phone was then at 100 percent. Have used it yesterday quite a bit, didn't charge it overnight and it is now at 63% so I think that has solved the problem. One other thing I noticed was that the shop set the default e-mail to I cloud and I always had the default set to my main e-mail account. On completely restoring it has now put the default e-mail to mine. Don't know if there is any connection or not. All I can say is that the complete restore seems to have solved the problem. Hope it works!

Just bought an iPhone 5s, as I turned on the phone it showed 71% of battery, I drained it to 15% and next charged it for 3 and a half hours to fully charged. Did I do any mistake ? Should have I let it to get discharged in order to fully charge it ?

Just bought an iPhone 5s, as I turned on the phone it showed 71% of battery, I drained it to 15% and next charged it for 3 and a half hours to fully charge. Did I do any mistake ? Should have I let it to get discharged in order to fully charge it ? Somebody told me I should have let it discharged and then to fully charge, but I didn't do it, my iphone is working very well, the battery too but I'm worried if the battery lifespan is gonna get worsen soon if I didn't abide by the rules and procedures of battery charging.
I had problems on my previous iPhone 4s, it died because I didn't replaced the battery with a new one because my battery never worked well and I never knew it , the battery used to overheat my iPhone and it caused to damage my processor completely to death. Who does the replacement of the iphone processor? I need help how to maintain with the iphone battery. And also let me know if I did something wrong that I should get worried about or not ?!?!

Apple does not fix the iPhone 4S, they replace the phone. If not covered by warranty, called an out of warranty exchange. Cost is US $199. Make an appointment at any Apple store.
Be aware, Apple does not sell iPhone parts, thus there is no legitimate source for genuine parts.

How to validate each entered hours for a day.

Hi
I have a requirement to allow staff members to enter on full hours of half hours (i.e use should be able to enter on 7.5 or 8 and not 7.25).
How can I implement this? Is there a seeded formula to validate each individual hours entry?

If you want to validate what the user enters in a particular cell (row/column intersection) then you may have to write your own time entry rule.
The seeded rules are to be seen as templates for any rules you need to create.
OTL calls a Fast Formula as the first stage of the TER. But, because you are validating the timecard BEFORE it has been submitted to the database, the data to be validated is only held in PL/SQL tables in memory. Therefore, it is always necessary for the FF to call an external function to read and process the data still in memory. The seeded rules all call these functions.
In your case, I would suggest that your function would need to search for each cell where an entry has been made and validate it. To do this efficiently, you would need to understand the TIMESTORE STRUCTURE.
Regards
Tim

I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more. Help!

I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more. I did a couple of thousand trashed images and half hour later, more arrived. There are a lot of images that seem off the internet, including gif.s, png.s. Help!

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Schedule report at every half hour interval from 5:30 AM to 5:00 PM

Hi,
We use BOXIR2 and our client has requested to schedule a RealTime Webi report at every half hour interval from 5:30 AM PST to 5:00 PM PST daily.
We tried scheduling the report but there is no option present in BO where we can select the start time or end time for a day.
Could you please let us know how we can achieve this?
Thanks,
Nikhil

Hi Ashwini,
I believe its not a good idea to set the date daily. After a lot of research on this, I found that there are 2 possible solutions for this.
1. Create 24 daily schedule for the report(s).
             i.e.
              1.     daily 8 am
              2.     daily 8:30 am
              3.     daily 9 am
              4.     u2026
              24.                daily 5 pm
2. Create a batch file that will craete a file and delete it after 10 secs. Upload that into Windows scheduler as it will run this batch file at every half hour and till 5PM only. The file created by batch file will be trigger to run report.
Does that sound good?
Thanks and Regards,
Nikhil

Signed out by forum every half hour!

If I've posted a topic and and following replies throught hte day - I am only kept signed in for a half hour at most! It is so frustrating to have to sign in 10x a day to use the forum. Can I adjust this setting anywhere? and no matter how many times I click the "remember me" checkbox - it NEVER does. Please help!

karenf1 wrote:
But it never happened here before the Adobe hacking. And I belong to meany forums and have never seen anything that approached this in severity. Sometimes I don't even get 20 minutes grace period!
Have you cleared the browser cache files using two different methods:
1) By going to Tools >> Options >> Privacy >> Clear your recent history
2) Launching your Windows explorer and going to:
<C:\Users\USERNAME\AppData\Local\Mozilla\Firefox\Profiles\yqbn3ldc.default\Cache>
replace USERNAME with your Windows profile ID
In December I wasn't able to login at all and miraculously, everything started working again in mid January.
So a clean start may be required for some user profiles.
My suggestions above applies to Mozilla Firefox only but it can be adapted for other browsers.

Answer wait time SG vs Call type

IPCCE 7.1 CVP 3.1 .We had a big issue regarding call type reports and skill group reports, exactly regarding the ASA. why the answer wait time is huge in skill group comparing to call type, our scenario is little bit different as we have five call types feeding the same skill group based on the customers category, and every queue to skill group node has different priority, so we need to know why answer wait time is hugely different in skill group compared to the call type.
attached is one of the five scripts, all the rest of them are the same and. each one is maped to one call toype.

attached are clear scripts
You have your Send to VRU in the wrong place, in my opinion.
With CVP, the first thing to have is an explicit "Send To VRU". For calls from the PSTN, failure in this should go to an End node, which forces survivability on the gateway to play the error message. For warm transfer calls, the best is probably Release.
No point in going further if Send to VRU fails.
Then I would set the ECC variables required for your microapps.
Once you have this, then go to your Call Type node - to set the "queuing" call type. I don't like to rely on the call type that the script is scheduled against, because you normally have to peel off calls for holidays, out of hours and so on. I like to make it obvious what's being counted by the queuing call type.
Finally, go into your Queue To Skill Group.
Be aware that RONA will mess up the call type stats a little - they will be counted as Other (which includes short calls, but they are counted separately so it's possible to see the RONAs). I would rather not set a call type on the RONAs as some do, as this will mean that they are in "Flow Out" and the stats are messed up even further.
For failures out of Q2SG, I like to send them to a script where I set an "error" call type to count and return the error label on the CVP RC.
Everyone has different ideas ...
Regards,
Geoff

Call Type Half Hour - Aggregated over days

Similar Messages

Maybe you are looking for