Call volume low after using blue tooth

I have an issue that I have not seen a response for. After nearly 2 years of perfect use, my call volume (that is the sound of a caller's voice) is now too low. The volume button on the side of the phone is at its peak (when I am on a call). No water or other debris has gotten into the phone speaker that I can see. The only think that did happen before this problem is - I had been on a blue tooth call in my car. I have used this phone with blue tooth for over a year without any problems, but I mention this as it is the only think that I can think of that might have caused this glitch. It is though the call volume is purposely very low and I thought that the blue tooth use may have caused this. Any thoughts?

It sounds like it is still connected.
Try disconnecting it here:
Settings > Bluetooth > Select the Durango and disconnect.
If that does not work:
Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

Similar Messages

HT201205 no sound after using blue tooth with iphone 5

I have just purchased a 2014 Durango and the Blue Tooth works fine with my Iphone 5. However, after i leave the vehicle, i have no sound on my phone. Have tried to restart, turned the blue tooth off, tried playing both a song and a movie to no avail. Any suggestions?

It sounds like it is still connected.
Try disconnecting it here:
Settings > Bluetooth > Select the Durango and disconnect.
If that does not work:
Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?

Hi Experts,
How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?
I mean, in driver program i called SSF_FUNCTION_MODULE_NAME to get the related FM for my smart form. after that How do I call it(smartform fm) . I tried to call by pressing PATTERN button in Report. but it is showing FM is not exist error.
Call function SSF_FUNCTION_MODULE_NAME
Export
formname = 'zsmartform'
import
fm_name = function_name.
function_name is stored the corresponding smartform fm. then How do i call it to process my smartform?
thanks in advance.

hi,
Chk this sample.
DATA: p_output_options TYPE ssfcompop, "occurs 0 with header line
p_control_parameters TYPE ssfctrlop. "occurs 0 with header line
p_output_options-TDCOPIES = 3. "number of copies.
p_output_options-tddest = 'LP01'. "def
p_control_parameters-no_dialog = 'X'. "no dilog box
p_control_parameters-preview = 'X'. "no preview
DATA : v_form_name TYPE rs38l_fnam.
*---- Function to get the function module name of the    ----
*---- specified Smart form.                              ----
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'GIVE YOUR SMART FORM NAME'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3 .
*---- Function Module to call the Smart Form          ----
*step 1 - go to ur smart form
*step2 - take environment
*step3-take function module name
*copy that unique number.
*step4 -come back to ur driver program.
*step5 - place ur cursur here. take patter,.give that unique number.
*at that time u will get the below code.
*step6 - rename that unique number with 'v_form_name' in the code generated by pattern.
CALL FUNCTION v_form_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_PARAMETERS =
control_parameters = p_control_parameters
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
output_options = p_output_options
user_settings = ' '
* ARCHIVE_INDEX_TAB =
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
for any clarifiaction pls revert.
regards,
Reshma

Why can't I charge Iphone 4S while using blue tooth

When I go to charge my Iphone 4S in car while using blue tooth the sound stops. What can i do to correct this? Or is that jus the way it is.

Requires the support of Bluetooth Profile A2DP, that's why. Your phone supports such, but it appears your hearing aids do not.

Connect OfficeJet 100 mobile printer to iPad using blue tooth

Trying to print from my iPad to the Office Jet 100 printer using blue tooth and not getting it set up correctly.
Help
Dryrot

Hi,
Unfortunately the printer is not e-Print enabled which means you cannot use the e-Print or AirPrint functionality which both work over wi-fi and not bluetooth.
The IPad does not have any options for bluetooth printing. I've included a link here to printers that are web connected and support wireless printing.
There's a thread here that covers this issue also.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Can you use earphone jack and continue to use blue tooth connection to speakers like bose

Can you use earphone jack and continue to use blue tooth connection to speakers like bose

Hi,
I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
Hope it helped!

Help connecting an LG phone using Blue Tooth to Macbook

Hello
I am having trouble connect ing my LG phone to my Macbook using Blue Tooth. I am using discover mode on booth devices, i get asked about the code number machine on each device, but on the macbook it says that there is a problem with my Audio Device and that I need to disconnect the headset,,I dont have one connected. Any help with this would be greatly appreciated. thnx

cheryllb wrote:
I can get them paired but when I select the lg device listed on my HTC phone it does nothing. I want to connect them so I can transfer the pictures from my old device to my new device.
Hi Cheryllb,
Thanks B33, as you are correct that this cannot be done via Bluetooth transfer. There are, however, ways that Cheryllb can get this done. Cheryllb, do you have a memory card in your LG Voyager? If so, you can save the pictures to the memory card (just go through your pictures, highlight them, press Menu, then move to card or "external memory" is how it may be displayed). Then, you can remove the card from the Voyager and either use it in your new device, or transfer the pictures using a card reader and put them on your PC.
To transfer Picture Messages from wireless device to PC:
1. Access photo from "My Pictures" and choose "Options."
2. Select "Move" or "Transfer."
3. Remove memory card and insert card and card reader in USB port.
4. Go to your file directory on the PC.
5. Transfer files to the folder of your choice.
If you do not have a memory card, you are able to connect your Voyager to a USB Cable and transfer the pictures from the device to the PC. Once that is done, they will be in a file. You can then hook up your new phone to the PC with it's USB cable and put the pictures on the new phone, by dragging and dropping that folder into the folder for your new device.
I hope this information is helpful and allows you to find a resolution to transfer your pictures from phone to phone. I do understand how important these pictures can be.
Thanks very much and have a great day!

Why cant send imessage without hitting "send" using blue tooth keyboard?

its quite annoying when you type with a blue tooth keyboard sending imessage you have to hit the "send" button on the screen all the way across instead of hitting the "enter" key on the keyboard
is there any option we can choose from the system??

Sherry-
I do not think there is a way around it. But try pressing the Tab key several times until the Send button lights up. If that works, pressing Return on the keyboard should be equivalent to hitting the Send button on the screen.
If that does not work, try each of the function keys along the top of the keyboard, in case one of them has been pre-programmed to Send a message. You may have to hold down the fn key (bottom left).
You might look into using the "Assistive Touch" feature at Settings-General-Accessibility-Assistive Touch. I do not know what it does, but it mentions having difficulty touching the screen.
Fred

I can not transfer the files using blue tooth?

I can not transfer the video,pictures using the blue tooth. Though mobile display says I pad paired,
But I pad is not connected to the mobile, even both places pass key is entered ok.

Transferring of files via Bluetooth on iOS is not supported. Bluetooth on the iPad, iPhone, iPod Touch is for the use of external keyboards, speakers earphones and accessories like those.
iOS: Supported Bluetooth profiles - Apple

Ipad connecting with vmware view client v5.1. "any way to disable or hide radial virtual keyboard mouse interface as using blue tooth external keyboard"

Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
Thanks for any and all feedback-
stratman1

I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

Dynadock U3.0 - after use - "Blue Screen" and System Restore required

Hello,
Everytime after I used my new Dynadock U3.0 and I shut down the computer, a system restore is required when I use the computer again.
I use a Samsung 900X4B. Could it be the Notebook or is something wrong with the Dynadock?
What could be the problem? (I use the latest drivers)
Thank you for helping.

Thank you.
I tried to disconnect the Dynadock using the icon on the right side.
I installed the newest driver, including the displaylink softwarev 6.3.
I also dissabled the virus scanner.
However, evertime I restart the notebook the system needs to be repaired or restored.
I did not matter, if I left the USB-link attached or detached it after using the icon on the right side to shut down the dynadock.
I tried all possible modulations.
Another dockingstation (USB2.0) is working fine. I also can remove or attach during work without problems.
May be I miss something.
Thank you.

Using blue tooth to send itunes audio to my car speakers

I've heard this is possible, but I have no idea how to go about doing this.
I've connected the phone to the car... no problem thru blue tooth.
But when I want to play audio, either the ipod app or the npr app, it plays thru the internal speaker... How do I direct the audio stream to the car's internal speaker??? Thanks

Your car has to have the Bluetooth audio feature for that to work

How do I set my 3gs to stream pandora using blue tooth?

What do I half to set a 3gs to in setting to send Pandora blue tooth?

Burneyman32 wrote:
Thanks
So, you saying 'Thanks' is what solved your question? Then what did you need Kilted Tim for?

8320 Curve - Cannot use Blue Tooth

Hi,
I have an unlocked 8320 Curve w/ GPS.
The Blue Tooth Feature does NOT work.... it seems to find other Blue Tooth enabled devices but will NOT connect to them, I am wondering if I need to reload the OS.....?
Has anyone experienced this at all?
when searching for paired devices' it seem sto freeze...
does anyone know where I can get the Software to reload? and how its done exactly?
thx!
EDIT: Removed email address.
Message Edited by MohA on 04-21-2009 04:55 PM

Hello,
I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
Soft reboot :
1) Hit the three following keys at the same time :
- Alt
- Right Shift
- Delete
2) wait 2 minutes for the Blackberry to wake up.
Hard reboot :
1) your Blackberry device is on
2) remove the battery and wait for a minute
3) Put the battery back
4) wait 5 minutes for the device to wake up.
Please tell us if it works for you.
besides, what other devices do you want to connect to?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Ear bud volume for phone calls too low after 3.1 update

The phone volume on my ear buds was great, until I updated to 3.1 for my 3G. Now it's barely audible for phone conversations. Turning up the volume is not helping. Is there any one else with this problem, and is there a solution? Thanks.

what generation is your iPod Shubes? My first gen didn't have the volume slider without headphones after 3.0 (because there is no external speaker), but my 3rd Gen does.

Call volume low after using blue tooth

Similar Messages

Maybe you are looking for