Call waiting? how do u use on the iphn

how do you go back to your original call. your on the ohn, you ans the call waiting, but how do  you end that call and go back to the first?

Hello,
On the iPhone there is a button called flash. You tap that and go back your previous call. If the party didn't hang up.

Similar Messages

  • TA38607 how do i deactivate call waiting while i could not find the call waiting in the Phone folder

    how do i deactivate call waiting while i could not find the call waiting in the Phone folder

    If you have a CDMA phone, there is no way to deactivate Call Waiting from the phone. You'll need to contact your carrier.

  • TS3367 My iPad doesn't ring, when I get a FaceTime call. How do I turn on the ringer,...???

    My iPad doesn't ring, when I get a FaceTime call. How do I turn on the ringer,...???

    This is very easy to resolve in 3 easy steps. goto
    1. settings
    2. general
    3. where it says 'Use Side switch to'  you will see two choices
    a) Lock rotation
    b) Mute
    Mute will be ticked if you are not getting a ringtone when someone calls you on Facetime
    Simply Click on 'Lock Rotation'
    Lock Rotation will now be ticked
    Mute will be unticked.
    Facetime calls will now ring your iPad2

  • How can i use in the same time input line and mic to recorder in several track whit SONAR

    I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english

    LIMACAR wrote:
    How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english
    Depending on which soundcard you have there, but if your card is capable for
    ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
    WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
    MME32 - > same w/ WDM/KS
    If you use Asio4All --> same w/ WDM/KS & MME32
    No mic and line source simultaenously w/ WDM/KS and MME32.
    You perhaps be able to do this w/ kX drivers.
    jutapa
    ADDED:
    You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
    Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
    jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

  • How to make use of the presentation variable in SQL result query

    I have 2 prompts in my dashboard.
    Prompt1 decides the values of Prompt2.
    I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
    To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
    SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
    the query is resulting into
    SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
    but the value in selected_comp is "ABC".
    Can anybody help in how to make use of the presentation variable in query to get the correct value
    thanks
    Shubha

    Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • How to make use of the FM EDIT_TEXT_FORMAT_DOC

    Hi frnz,
    How to make use of the FM
    EDIT_TEXT_FORMAT_DOC
    Could anyone explain with an example how to use this
    regards

    hi
    I need an example please....
    did any one use that FM
    Regards

  • I have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they r printed?

    i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?

    why can't you use the keyboard the way it is printed?

  • How may I use directly the numerical when caps lock is on?

    How may I use directly the numerical when caps lock is on?

    I don't understand?  Having caps lock on still allows you to type numbers.  Perhaps you mean something else?

  • Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?

    Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?

    Settings > General > Reset > Reset Network Settings

  • How can I use either the contact center reporting or CAR to identify calls transferred from agents to other extensions?

    We are not to the call manager and I am trying to find a way to report calls that were received to our customer service agents though the call queue but were subsequently transferred to an extension out side of the queue.  With our implementation we changed call routing and need to see how many misrouted calls are getting to the queue.
     

    Marc,
    Are you on UCCE or UCCX? If you're using UCCE, the Termination_Call_Detail table includes a record of all transfers made by Agents.
    -Jameson

  • IPhone 4s call waiting; how do I get back to the first call?

    When I'm on a call and a second call comes in I tap "hold current call and answer." I get connected to the second call and the first call is put on hold. But when I am done with the second call, how do I get back to the first call? I can't find any way to get back to the call that is on hold. I usually end up hanging up on both calls. Not good.
    Also, how do I switch back and forth between two calls? How do I put the second call on hold, go back to the first call to tell that person I must call them back, then return to the second call?

    http://support.apple.com/kb/TA38607?viewlocale=en_US
    Good Luck

  • In the C309, How can I use just the regular black ink cartridge only?

    Hi
    I just bought a HP C-309 a short time ago.  I bought a HP reg black cartridge XL quite quickly.  This thing is a sweet
    machine, works perfectly, but is a terrible terrible ink hog. 
    Had I known, I would have gone for the Kodak which touts much lower ink costs.
    I only use this thing for documents.  I do not want to keep putting color cartridges in.  They are all on low except for the black XL cartridge.  How can I set it up to use only this cartridge for black and white..and just leave the color ones on empty.
    I will have to get rid of it if I have to keep feeding it this way.  The ink levels seem always low.  By the way, the help asks me for model number.  They want to know whether it is 309n or 309g.  I see no way to find out..no notations on machine or purchase documents.  HP, if  you need this info...make it easy for the consumer to FIND the info...gheesh!

    Hi   lyn1360
    There are several circumstances when color ink may be used—primarily to improve print quality, and sometimes to improve printer reliability—even if the document appears to be only black text-and-graphics. Many HP printers utilize chemical interactions to improve the quality and permanence of plain paper black text-and-graphics by adding small amounts of color ink to certain black areas. Some dark images which look black to human eye may contain a combination of black and color inks. For black and white images and photos or grey black which we think as black, a blend of colors called "composite black" may be used to achieve significantly better image quality and smoother gray tones than can be accomplished with black inks alone. Some inkjet printers utilize pigmented black ink, which is incompatible with some inkjet photo paper. In this case, dark or black areas are made up of color inks.
    For users who wish to print utilizing just black ink (despite the reduced print quality), many HP printers offer options. For example, a driver color setting (by selecting "print in grayscale with the black cartridge only" in printing preferences) specifies printing using only black ink. In addition, many IPH printers can operate in "reserve mode," which allows the user to continue to print with just the black cartridge when the color cartridge is removed or not installed.In HP IIC systems like your printer C309, all supplies are required to be installed in the printer for the printer to function.
    To find the correct model number for your printer, you can just open the carriage access door and on the right side you can see the model number. For OJ Pro printers, we need to open the cartridge access door on the front left side to see the model number.
    For more info regarding the ink usage, check the below link:
    http://h10060.www1.hp.com/pageyield/en-019/article​s/howInkIsUsed.html?cCode=us
    Mark this post as answered so that others might find it useful
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • How to make use of the XFList in the Function Bar  of the XML Form Builder?

    Hello:
        Now I am creating blog using the XML Form Builder.
        In the bolg publishing interface of the SDN ,there is a tpoics list ,in this list you can select single or multiples.
        I find the XFList in the Function Bar of the XML Form Builder.But I don't know how to make use of this list?Who can help me?
    lexian
    Thanks a lot!

    In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
    SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
    The first text box under Groups attribute corresponds to SCREEN-GROUP1,
    2nd text box for SCREEN-GROUP2
    3rd text box for SCREEN-GROUP3
    4th text box for SCREEN-GROUP4
    Hope this helps.
    Thanks,
    Balaji

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • 30" display and 15" PowerBook. How can I use just the 30"?

    So i just got a 30" monitor. Hooked it up to my 30" and it works great. But when i use design applications its a bummer because the top menu bar is on the small 15" monitor. Then I use mirror displays but think it such a waste of space to not use the PowerBooks sweet screen. How can I just use the 30" monitor by itself from my laptop?

    In the "Arrangement" pane of "Displays" system preference, turn off mirroring, and drag the picture of the menu bar to the picture of the monitor you want it on. If you want to use only the external display, attach the power adapter,and an external keyboard and mouse. Close the lid. The computer will sleep, but will wake, and continue to run with the lid closed, when you use the external keyboard or mouse.

Maybe you are looking for

  • New Mac User: iTunes Auth with multiple user accounts

    With a Mac with multiple user accounts, does EACH user account need to have iTunes authorized, or is iTunes authorized for an entire mac machine?

  • Can you set a half-size (640x360) sequence in FCE?

    I have some older SWF ad units in my portfolio that cannot be converted to .mov files in Flash, so I'm forced to make video screen grabs of the sequences. They look nice and sharp at their original pixel dimensions of 336x280 pixels, but when grabbed

  • How to Upgrade your notebooks OS to Windows 8.1?

    Dear all, Please be noticed on this update, it's not like regular Windows update, because of some drivers compatibility issue, please follow up below actions to prevent your systam problem. Please follow up below instructions, or you could go to belo

  • How to watch videos in Safari 6.1

    OS X 10.8.5 I can't watch videos included on sites in Safari. All I see is a white space. Youtube works well.

  • 2008 r2 Windows update Failed with 8000FFFF

    HI One of our clients has not run windows update in sometime. It was setup for automatic updates so they had never checked their server manually for updates. We have tried to reset the components using several methods from a whole day of gooling this