Call WDA from ABAP via function module

Hi WDA experts,
is there any possibility to call a WDA within a ABAP report AND include it in the process.
The best would be to call a WDA via a function module - make some inputs on the WDA side - press submit and the function module gives me the data from the webdynpro back to my application.
I know that I can call a WDA via the function CALL_BROWSER, but in this case the WDA application is fully independent from the report and I am not able to post any data back to the report.
I also know FM WDY_EXECUTE_IN_PLACE, but in this case I need a HTML container to display the WDA and there it seems that I also never get back any data back to the report.
Any hints are appreciated.

Not too hard:
CALL WDA passing in a KEY on start plug.
write the data to a shared memory object using the key passed as the
key to a shared memort object on the submit.
(see blogs on writing Shared maemory objects in ABAP)
Then simply exit APP.
On return read the data from the Shared memory Object.
The shared memory object lives across the 2 sessions.
cheers
Phil.

Similar Messages

Calling webservices from ABAP via https/ssl with p12 certificates.

Hi all,
I have a problem with calling an external webservice via HTTPS.
I configured my system as indicate in the blog /people/jens.gleichmann/blog/2008/10/31/calling-webservices-from-abap-via-httpsssl-with-pfx-certificates but when I check the RFC connection the result is: ICM_HTTP_SSL_ERROR.
I check the ICM monitor and this is the result:
[Thr 11] Thu May 26 16:02:57 2011
[Thr 11] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
[Thr 11] session uses PSE file "/usr/sap/SV5/DVEBMGS10/sec/SAPSSLHTTPS1.pse"
[Thr 11] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536875072 (0x20001040) = "received a fatal SSLv3 handshake failure alert message from the peer"
[Thr 11] >> Begin of Secude-SSL Errorstack >>
[Thr 11] WARNING in ssl3_read_bytes: (536875072/0x20001040) received a fatal SSLv3 handshake failure alert message from the peer
WARNING in ssl3_output_cert_chain: (12354/0x3042) No hierarchy certificate in FCPath
WARNING in reduce_FCPath_by_Issuer: (12354/0x3042) No hierarchy certificate in FCPath
[Thr 11] << End of Secude-SSL Errorstack
[Thr 11] SSL_get_state() returned 0x000021d0 "SSLv3 read finished A"
[Thr 11] Server's List of trusted CA DNames (from cert-request message):
[Thr 11] #1 " certificate 1
[Thr 11] #2 " certificate 2
[Thr 11] SSL NI-sock: local=ip peer=ip2
[Thr 11] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000652010)==SSSLERR_SSL_CONNECT
[Thr 11] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt.c 2012]
SAP_ABA 700 0012 SAPKA70012 Componenti validi per tutte le applicazioni
SAP_BASIS 700 0012 SAPKB70012 Componenti di base SAP
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C PI_BASIS 2005_1_700
ST-PI 2008_1_700 0001 SAPKITLRD1 SAP Solution Tools Plug-In
SAP_BW 700 0013 SAPKW70013 SAP NetWeaver BI 7.0
SAP_AP 700 0010 SAPKNA7010 Piatt. d'applicazione SAP
CCM 200_700 0010 SAPK-27010INCCM CCM 200_700 : Add-On Supplement
SRM_PLUS 550 0010 SAPKIBK010 SRM_PLUS per mySAP SRM
SRM_SERVER 550 0010 SAPKIBKT10 SRM_SERVER
BI_CONT 703 0001 SAPKIBIIP1 Contenuto Business Intelligence
ST-A/PI 01L_BCO700 0000 - Servicetools for other App./Netweaver 04
What do you think about it?
Best regards,
Norberto.

Don´t forget to set your proxy settings! Be sure that the application server could establish a connection to the external server.
From the BLog.
Thr 11 WARNING in ssl3_read_bytes: (536875072/0x20001040) received a fatal SSLv3 handshake failure alert message from the peer
From the Error.
Have you looked into the above details?
Thanks
SM

JCO RFC Provider: "Bean not found" when calling EJB from ABAP via RFC

Hello,
I'm having trouble calling an EJB in a CE 7.1 system from ABAP via RFC. I'm trying to use the JCO RFC Provider service, which mean that I want to expose an EJB so that it can be called via Remote Function Call.
I have documented everything, including the code and the deployment descriptors I wrote, in this thread in the CE forum: Jco RFC Provider: Bean not found
If there's any chance you can help, please do me a favour and look into the problem.
Thanks a lot!
Thorsten

Hi Vladimir,
Thank you very much, your help was immensely valuable.
I just had to add the function declaration to the Home Component interface, everything else was correct, and now it works.
Cheers,
Thorsten

Pass URL parameters from BSP to WDA for ABAP (via Post   )

Dear Gurus,/ Joerge,
I am unable to post my Code here, but with the guidance provided by Joerge i am able to solve this
i Have been through the Below thread
Pass URL parameters from WD to BSP via Post
Dear Gurus,
"Since I am unable to Post new thread i am Continuing this thread, though this Issue has been
" resolved,i need some more info on the following issue, Kindly guide me,
I have gone through the below thread but left with no clue
Pass URL parameters from WD to BSP via Post
Here i have 2 Issues
First one is --->
" After pressing the Button I am calling this URL which is WDA for ABAP
      action="http://company/sap/bc/webdynpro/sap/zuser"> " I am calling WDA for ABAP URL here
" Kindly guide me how to pass the Value
Second one is -->
" This value need to be passed to the URL above and
" How to capture the Same in WINDOWINIT method of WDA for ABAP
" And how to Capture this Value in Webdynpro INIT method
"Here am using Form and method = post , I am removing this as it is causing some problem while posting
      action= my WDA For ABAP URL here " I am calling WDA for ABAP URL here
" Kindly guide me how to pass the Value
" This value need to be passed to the URL above and
" How to capture the Same in WINDOWINIT method of WDA for ABAP
Thanks and Regards
Ramchander Rao.K

Hi,
let me see if I understand you well.
BSP -
You wrote the code for catching the user name in the event OnCreate, which means that you know who´s working with the BSP application when it starts.
Somewhere you must have a button or something with text like "Call WDA application". When user presses the button, it triggers events OnInputProcessing. Here you must write the code for the cookie that "sends" the parameter(s), something like:
CALL METHOD cl_bsp_server_side_cookie=>set_server_cookie
EXPORTING
    name                  = 'MY_COOKIE'
    application_name      = 'ZUSER_NAME_GET'
    application_namespace = 'ZUSER_NAME_GET'
    username              = sy-uname
    session_id            = 'SAME_FOR_ALL'
    data_value            = PAGE_DATA
    data_name             = 'PAGE_DATA'
    EXPIRY_TIME_REL       = 3600.
you call then the URL for the WDA application.
WDA -
probably in method WDDOINIT of the component controller you´ll write the code for reading the "content" of the cookie:
CALL METHOD cl_bsp_server_side_cookie=>get_server_cookie
EXPORTING
    name                  = 'MY_COOKIE'
    application_name      = 'ZUSER_NAME_GET'
    application_namespace = 'ZUSER_NAME_GET'
    username              = sy-uname
    session_id            = 'SAME_FOR_ALL'
    data_name             = 'PAGE_DATA'
CHANGING
    data_value            = PAGE_DATA.
read more about the cookies in SDN, because I am not sure if this is the correct example for transmiting values. I´ve used it in conjunction of instructions IMPORT and EXPORT for transmiting an internal table.
if this is not working properly, then try with IMPORT TO MEMORY and EXPORT FROM MEMORY.

Any program for calling bapi from ABAP step by step

any program for calling bapi from ABAP step by step
points will be rewarded,
thank you,
Jagrut BharatKumar Shukla

Hi Jagrut,
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
ex BAPI:
API_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
You can get good help form the following links,
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://sap-img.com/bapi.htm
EG::
Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Reward pts if found usefull :)
regards
Sathish

Datasource via function module

Hi,
I am building a function that is due to be used by a Datasource (via Function Module).
This function uses table WDRD. It applies to this table a code that needs the use of an internal table for the calculation (for intermediary calculation storage). After which, I want to get the result of this internal table (say T1_DATA), and return it to E_T_DATA, which will be used to fill my datasource. This is where I am stuck.
-> When I try to get the content of my internal table in my cursor (code: OPEN CURSOR WITH HOLD S_CURSOR FOR
select * from T1_DATA
endif.),
I get an error message stating the table is not defined in the ABAP dictionary.
-> When I try to avoid the cursor and put directly the content of my table T1_DATA in table E_T_DATA, I don't get anything in my Datasource.
Any help would be greatly appreciated.
Thanks,
Pierre

Hi,
Which structure are you using??
Are you using the same old structure for this function module as well.
Have you enhanced the structure with new required fields.
New extrac fields needs to be added to existing structure if you are using the same or create a new one and make sure that you have all the fields in the structure which you are going to use in the data source.
You need to take care for the append as well and the issue could be in the code as well.
Make sure you have written the proper code and just for the new fields done an append
Thanks
Ajeet

Is it possible to call website from ABAP Program?

Hi Experts,
 Is it possible to call website from ABAP Program?
It is very Urgent Help me.
Regards,
Ashok.

Hi,
Check the following program:
REPORT ZURL NO STANDARD PAGE HEADING.
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
 EXPORTING
 program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
 commandline = URL_TABLE
 INFORM = ''
 EXCEPTIONS
 PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
 WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
Regards,
Bhaskar

WBS copy via function module "K_PLAN_TO_PLAN_COPY"

Hi Experts
anybody please advise whether WBS copy to other via function module "K_PLAN_TO_PLAN_COPY"
is possible or not in below situation.
Currently we faced some issue when WBS satus is "TECO", we can not
copy WBS to another WBS (we want to copy whole wbs into others) by
function module "K_PLAN_TO_PLAN_COPY".
So we just change system status from TECO to REL then copy wbs to other,
however, we could face another issue with this way of copying. (since we
have to change wbs status, it could cause conflict against other project)
We want to copy wbs without changing wbs status via function module "K_PLAN_TO_PLAN_COPY".
Can it be possible? if yes, please advise how to, (settings/conditions/something like that)
Thank you.
Satoru

Hi Satoru,
The Function Module K_PLAN_TO_PLAN_COPY is not released for customers and therefore it is not intended to be used in customer specific programs or enhancements. For further details, please have a look SAP Note 109533.
Sorry for not having better news.
BR,
Enrique

Calling WDA from BSP

Hi all,
Is it possible to call WDA from a BSP via a hyperlink and pass parameters that the WDA would need? How could I go about doing this?

Hi Alexander,
You can't pass the information(Context Data) from WDA to BSP directly so you just store the information in some variables or internal tables use the normal user paramenters like EXPORT & IMPORT or SET and GET parameters. Thgoruhg this way only you can communicate the data between these 2 technologies otherwise you need to save the data in some ztable and use the same table in both technoloes.
you can also use Server Side Cookies.
Perhaps take a look into this blog from Koen Labie:
/people/koen.labie2/blog/2006/11/29/eating-cookies-with-webdynpro-and-bsp
The blog shows how to pass the data from BSP to WD.
Transfering data between WD and BSP via Server side Cookies can also be used for your requirement.
For that you have to set the Data Cookie in the WD and then get the Cookie in the BSP.
Please keep in mind that if you mix two different technologies you will have to deal with integration. WD and BSP will run in two different sessions at the server. Handling data exchange, login, logoff, data transfer at the server and client, etc can be challenging. You might end up with recreating enterprise portal-like software. So depending on the scope of the project, it might be more advisable to stay within the BSP environment or to reuse the SAP enterprise portal to integrate these two technologies at the client.
Hope this will help you.
Cheers,
Darshna.

Generic Delta Extraction via Function Module

Hello,
i need a help for a generic delta extraction based on a Function Module. As an example i take the function module RSVD_BW_GET_DELTA_DATA.
My generic delta extractor based on the field AEDAT - Change Date and i will extract purchase service orders and entry sheets.
In the sample function module the select for the extraction worked with the table ROBWQTSTAT, but this table ist empty after the initialization.
OPEN CURSOR WITH HOLD G_CURSOR FOR
      SELECT * FROM ROVERCUBE1
               WHERE COUNTRY IN L_R_COUNTRY AND
                     REGION IN L_R_REGION AND
                     KUNNR   IN L_R_KUNNR AND
                     TYPE    IN L_R_TYPE AND
                     GJAHR   IN L_R_GJAHR AND
Here the timerange calculated in form GET_TIME_INTERVAL is evaluated.
                     TSTMP   IN S_R_TSTMP AND
                     OBJVERS = 'A'.
I found the table ROOSGENDLM. In this table i found the field DELTAID with the last date of the extraction and the field REPEATID with the date for the repead-Update.
My Questions:
Is this the right way to build an generic delta extraction with an function module or must i install a coding in my function module for an update of the table ROBWQTSTAT?
Which settings are needed in the table ROOSOURCE for a generic delta extraction via function module?
Best regards
Uwe

Hi Uwe,
please have a look at https://weblogs.sdn.sap.com/pub/wlg/2415. [original link is broken] [original link is broken] [original link is broken] It might help
kind regards
Siggi
PS: We already had almost the same question here today.

Configurational settings for calling HTTP from ABAP

Hi,
I need to call HTTP from ABAP.
Other than ABAP code, what configurational settings (and functional settings, if any) I need to do for this scenario..
Please help...
Thanks,
Shivaa...
Moderator message - Duplicate post locked
Edited by: Rob Burbank on May 7, 2009 3:44 PM

Hi All,
I have a problem to pass a file.txt in a parameter of a web service.
Iam using CL_HTTP_CLIENT and I am passing the parameters (user, password and file):
clear wa_form.
wa_form-name = 'user'.
wa_form-value = '33333333333'.
append wa_form to it_form.
clear wa_form.
wa_form-name = 'password'.
wa_form-value = '11111111'.
append wa_form to it_form.
clear wa_form.
wa_form-name = 'file'.
wa_form-value = data. ---> "data" is a type string with the data of the file.txt.
append wa_form to it_form.
r_client->request->set_form_fields( fields = it_form ).
I have not problem with the user and password parameters.
Thank.

Error in Extraction with Generic Datasource via Function Module

Dear Gurus,
Iam working for BI-HR module.We are extracting data with generic data source via function module. The client some more extra fields in already existing DS. So we made a copy of that Function module and tried to create new generic DS, we got error while extraction like "Error occured during the extraction process". Can you please help in resolving this issue, your valuable suggestion would be highly appreciated.
Thanks and regards
Arun S

Hi,
Which structure are you using??
Are you using the same old structure for this function module as well.
Have you enhanced the structure with new required fields.
New extrac fields needs to be added to existing structure if you are using the same or create a new one and make sure that you have all the fields in the structure which you are going to use in the data source.
You need to take care for the append as well and the issue could be in the code as well.
Make sure you have written the proper code and just for the new fields done an append
Thanks
Ajeet

Call java from ABAP

JCo connectivity is used to call RFCs from Java. can i call Java from abap?
thanks in advance.....
regards,
Sundararamaprasad

Hi Sundar ,
This link will surely give u an idea about calling java fro ABAP using Jco.
http://www.thespot4sap.com/Articles/SAP_Netweaver_Java_Connector.asp
regards,
aravindh.

To call webmethods using RFC(Remote Function Module)

Hi Sap Group.
i have got a situation on how to call the webmethods using Remote Function Module ,i know that there should be rfc destination created in sm59 already,so can i use the same existing rfc destination which was used to call webmethods with another scenario in my interface.
can anybody help me in this.
regards.
Varma

Hi Naina,
Normally RFC are synchronous, they do have return parameter as export parameter.
If return parameter is missing then , you can create Wrapper RFC.
Wrapper RFC:
It is nothing but you just create BAPI in SE37 transaction with Return parameter as export parameter and make it remote enabled by clicking on Radio button.
Under source code, CALL BAPI which XI has to call.
Thats it!
I hope this helps.
Let me know if any help required.

Adding a new conditon on head via function modul?

Hi,
is there a way to add a condition to an order via function module? I mean in customizing we have maintained the calc scheme (and everything else) and assign it to the order. What we want is to add the new condition type to the head of the order via function module. The scenario is as follows:
We create an order and have on the header a field for a value. If you type a value in the field and press enter the condition should be created and calculatetd. The result is given in the condition tab of the order on header level.
We try to not do a modifictaion. therefore i am looking for a function module. Is there someone who could help?
thanks and regards,
Ming

Why can't this be done by the pricing configuration?
There are also pricing user exits available, which are not modifications and exist for this purpose exactly (i.e. when for some reason configuration alone is not enough). See the list here:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/sdUserexits

Call WDA from ABAP via function module

Similar Messages

Maybe you are looking for